given the thermochemical equation below, what is the change in energy when 10.0 g of h2 gas completely reacts with excess oxygen to form water?

Answers

Answer 1

The change in energy when 10.0 g of H₂ gas completely reacts with excess oxygen to form water is -285.8 kJ.

This can be determined by analyzing the thermochemical equation provided. This equation states that when 10.0 g of H₂ gas reacts with excess oxygen, it will produce 18.0 g of water and -285.8 kJ of energy.

The equation also reveals that the reaction is exothermic, meaning that energy is released during the reaction. The quantity of energy released is -285.8 kJ.

This means that when 10.0 g of H₂ gas reacts with excess oxygen to form water, there is a decrease in energy of -285.8 kJ.

To know more about thermochemical equation click on below link:

https://brainly.com/question/2874342#

#SPJ11


Related Questions

Q1. Sulphur burns in air upon gentle heating with a pale blue flame. It
produces colourless and poisonous sulphur dioxide gas.
a) What are the reactants and products in this reaction? Write as a
word equation.

Answers

Sulfur and oxygen are the reactants in this process, and sulfur dioxide is the end result. Sulfur + Oxygen = Sulfur Dioxide is the word equation for this process.

What is the chemical formula for oxygen and sulfur dioxide?

Chemical equation writing. Sulfur trioxide is created when sulfur dioxide and oxygen are combined. Sulfur trioxide, often known as SO3, is the result of the reaction between sulfur dioxide and oxygen (SO2+O2).

The reaction between sulfur dioxide and sulfur oxygen is what kind?

This reaction is a combination reaction, which is the type of chemical reaction it is. Balanced Approaches: S and O2 combine to generate SO2 in this reaction of combination. Make sure the number of atoms on either side of the equation is equal by carefully counting them up.

To know more about reactants visit:-

https://brainly.com/question/17096236

#SPJ1

in a many-electron atom, can we predict unambiguously whether the 4s orbital is lower or higher in energy than the 3d orbitals?

Answers

Answer: No

Explanation:

because the relative energies of these orbitals depend on the specific electronic configuration of the atom and the effective nuclear charge experienced by the valence electrons. In some cases, the 4s orbital may be lower in energy and fill before the 3d orbitals, while in other cases the 3d orbitals may be lower in energy and fill before the 4s orbital.

water, h2o, and hexane, c6h14, are commonly used as laboratory solvents because they have different physical properties and are able to dissolve different types of solutes. 32. explain, in terms of the molecular polarity, why hexane is nearly insoluble in water

Answers

Hexane, C6H14, is a non-polar molecule, meaning that its electric charge is evenly distributed. On the other hand, water (H2O) is a polar molecule, with an uneven distribution of electric charge. Since the two molecules have opposite polarities, they do not interact with one another, leading to the nearly insoluble nature of hexane in water.

When explaining, in terms of the molecular polarity, why hexane is nearly insoluble in water, it's crucial to consider the nature of the molecules, their polarity, and their ability to interact with one another.

What is hexane?

Hexane, with the chemical formula C6H14, is a saturated hydrocarbon with a boiling point of 69°C. It's an odorless liquid that's colorless, and it's frequently utilized as a solvent in the laboratory. When hexane molecules are considered, they are all nonpolar molecules, meaning that the electrons are distributed uniformly among the atoms, and there is no permanent charge on any part of the molecule.

What is water?

Water (H2O) is a polar molecule with a partial positive charge on its hydrogen atoms and a partial negative charge on its oxygen atoms. It's a very common solvent in laboratories because it's extremely polar and can dissolve a wide range of substances. It's because of the difference in the polarity of water and hexane molecules that hexane is nearly insoluble in water.

The reason hexane is insoluble in water is that water is an incredibly polar substance, while hexane is a nonpolar substance. The polar water molecules are attracted to other polar substances and repelled by nonpolar substances like hexane, which has no charge to attract polar water molecules.

Therefore, as a result, hexane does not dissolve in water and is nearly insoluble.

To know more about hexane click here:

https://brainly.com/question/30908383

#SPJ11

pure phosgene gas (cocl2), 0.0290 mol, was placed in a 1.30-l container. it was heated to 710.0 k, and at equilibrium, the pressure of co was found to be 0.505 atm. calculate the equilibrium constant (kp) for the reaction.

Answers

The equilibrium constant (Kp) for the pure phosgene gas (COCl₂), 0.0290 mol, that was placed in a 1.30-l container and it was heated to 710.0 = 1.1946/x.

To determine the Kp, use the equation:

Kp = (P (COCl₂) / [P (CO)] [P (Cl₂)])

The moles of phosgene gas = 0.0290 mol

Volume of container (V) = 1.30 L

Temperature, T = 710.0 K

The equilibrium constant Kp for the reaction is:

CO(g) + Cl₂(g) ⇌ COCl₂(g)

At equilibrium, the partial pressure of CO is P (CO) = 0.505 atm

Equilibrium concentration of COCl₂ = 0.0290/1.3

= 0.0223 mol/L

At equilibrium, the concentration of CO = P (CO)/RT

= 0.505 atm/0.08206 L atm mol-1 K-1 x 710.0 K = 0.0304 mol/L

At equilibrium, the concentration of Cl2 = x/V = x/1.30 M

Using the expression of equilibrium constant:

Kp = (P (COCl2) / [P (CO)] [P (Cl2)])

Kp = [0.0223]/([0.0304] [x/1.30])= [0.0223 x 1.30] / [0.0304 x x]

Kp = 1.1946 / x

Therefore, the equilibrium constant (Kp) for the given reaction is 1.1946/x.

Learn more about equilibrium constant here: https://brainly.com/question/3159758

#SPJ4

Consider that Fe3+ is a d5 metal center. If it is surrounded by weak-field ligands in an octahedral configuration, how many electrons are in the lower three and upper two metal orbitals, respectively.
A. 3,2
B. 2,3
C. 5,0
D. 1,4

Answers

The correct answer is 3, 2. If Fe3+ is surrounded by weak-field ligands in an octahedral configuration, there will be 3 electrons in the lower three metal orbitals and 2 electrons in the upper two metal orbitals. So, the correct option is A.

An octahedral complex is a complex where the coordination sphere of a central metal ion is composed of six ligands that are located at the corners of an imaginary octahedron. The octahedral arrangement of six ligands is the most common coordination mode. The configuration of the eight corners of an octahedron is made up of six ligands, with the metal center located at the center.

The d5 electron configuration for Fe3+ is t2g3eg2, which is filled according to Hund’s rule with the lower-energy orbitals being filled first. According to the weak-field ligand hypothesis, the t2g orbitals will be relatively unaffected in energy, whereas the eg orbitals will be significantly raised in energy.

As a result, the three electrons in the t2g orbitals will occupy the lower-energy orbitals, while the two electrons in the eg orbitals will occupy the higher-energy orbitals. As a result, there will be 3 electrons in the lower three metal orbitals and 2 electrons in the upper two metal orbitals. The correct option is A. 3, 2.

You can learn more about the octahedral complex at: brainly.com/question/30857627

#SPJ11

what is the formula for chlorine

Answers

The formula for chlorine is Cl2.

The question is if the atmospheric pressure is 0. 993 atm and the height of the water column at the end of the experiment is 16. 5cm, what is the total pressure of the gas in the eudiometer? and if the total pressure is at 20,5 degree centimeter is 580 mmhg. What is the partial pressure of the h2 gas

Answers

We must apply Dalton's Law of Partial Pressures, which states that the total pressure of a gas mixture is equal to the sum of the partial pressures of each gas in the mixture, to determine the partial pressure of H2 gas in the eudiometer.

The atmospheric pressure of 0.993 atm must first be converted to mmHg using the formula: 0.993 atm x 760 mmHg/atm = 755.88 mmHg.

The total pressure of the gas inside the eudiometer may then be determined by:

Total pressure equals the sum of atmospheric pressure and water column pressure.

Total pressure = 16.5 cm x 1 mmHg/cm plus 755.88 mmHg

Pressure overall is 771.38 mmHg.

Eventually, we can determine the partial pressure of H2 gas using Dalton's Law and the supplied total pressure of 580 mmHg:

learn more about  Partial Pressures here:

https://brainly.com/question/30114830

#SPJ4

Give the approximate bond angle for a molecule with an octahedral shape. 109.5° 180° 120 O 105° 90° QUESTION 3 What is the hybridization of the orbitals on carbon in C2H4?

Answers

1. The approximate bond angle for a molecule with an octahedral shape  is 90 degree. so, option (e) is correct.

2. The hybridization of the orbitals on carbon in C2H4 is SP2 hybridization.

The octahedral shape of molecules is defined as the shape of molecules where six atoms or ligands or groups of atoms are arranged in a systematic way around a central dogma or atom. The Octahedral Shape of Molecules contains eight faces and the band angel is 90 degree. It consists of two square pyramids back to back each square pyramid with four faces.

In sp² hybridization is defined as the hybridization where one s orbital and two p orbitals hybridize to form three sp² orbitals each of this consisting of 33% s character and 67% p character. SP2 hybridization is required whenever an atom is surrounded by three groups of electrons.

To learn more about octahedral shape

https://brainly.com/question/30160815

#SPJ4

The complete question is,

1. Give the approximate bond angle for a molecule with an octahedral shape.

a. 109.5°

b. 180°

c. 120

d. 105°

e. 90°

2. What is the hybridization of the orbitals on carbon in C2H4?

Chromium crystallizes with a body-centered cubic unit cell. The radius of a chromium atom is 125 pm. Calculate the density of solid crystalline chromium in g/cm^3.

Answers

The density of solid crystalline chromium in g/cm³ is 7.19 g/cm³.

A unit cell is the smallest group of atoms, molecules, or ions in a crystal that can repeat indefinitely to form the whole crystal. A unit cell is used to describe the basic repeating arrangement of atoms, ions, or molecules in a crystal. The density of a material is its mass per unit volume, and it is measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).

The density of a unit cell formula:ρ = (Z × M) / (a³ × N)ρ = Density of unit cell Z = Number of atoms per unit cell M = Atomic weight of atoms in a unit cella = Edge length of the cube N = Avogadro's numberThe unit cell volume (Vc) = a³Z = 2 (as chromium has a BCC crystal structure, the number of atoms per unit cell is 2)M = 52N = 6.022 × 10²³ρ = (2 × 52) / (4 × 125³ × 6.022 × 10²³)ρ = 7.19 g/cm³

Therefore, the density of solid crystalline chromium in g/cm³ is 7.19 g/cm³.

You can learn more about density at: brainly.com/question/29775886

#SPJ11

a chemistry graduate student is given of a chlorous acid solution. chlorous acid is a weak acid with . what mass of should the student dissolve in the solution to turn it into a buffer with ph ?

Answers

To turn chlorous acid solution into a buffer with pH 2.75, the mass of NaOH that a chemistry graduate student should dissolve is 1.338 g.

What is a buffer?

A buffer is a solution containing a weak acid and its conjugate base (or weak base and its conjugate acid) in similar amounts that can resist changes in pH when a small amount of acid or base is added.

Chlorous acid is a weak acid with the following equilibrium: HClO₂ (aq) + H₂O (l) ⇌ H₃O⁺ (aq) + ClO₂⁻ (aq)

For a solution of weak acid with the addition of a strong base, we have the following reaction: HClO₂ + NaOH → NaClO₂ + H₂O

Here, we add NaOH to turn the solution of chlorous acid into its buffer form. After adding NaOH, the resulting solution is composed of chlorous acid, its conjugate base (chlorite ion), and excess NaOH.

Next, we use the Henderson-Hasselbalch equation: Hence, the pH of the buffer is pH = pKa + log [A⁻]/[HA]

pH = 1.96 + log (0.00925 / 0.09075)

pH = 2.75

Finally, we calculate the mass of NaOH that a chemistry graduate student should dissolve: moles of NaOH = moles of HClO₂ = [HClO₂] × VNaOH = 0.00925 M (250 mL / 1000 mL) = 0.0023125 mol.

NaOH is in excess in the reaction; thus, it should be the limiting reagent. 0.0023125 mol NaOH corresponds to 0.1036 g of NaOH (1 mol / 39.997 g/mol), which is less than the amount required to make the buffer. Hence, the actual mass of NaOH required is 1.338 g.

Therefore, to turn chlorous acid solution into a buffer with pH 2.75, the mass of NaOH that a chemistry graduate student should dissolve is 1.338g.

Read more about acid here:

https://brainly.com/question/25148363

#SPJ11

explain the differences in chemical behavior of the magnesium and aluminum hydroxide. use chemical equations in your discussion.

Answers

Magnesium hydroxide and aluminum hydroxide have different chemical behaviors due to differences in their atomic structure and molecular structure.

Magnesium hydroxide is a colorless, crystalline compound with the chemical formula Mg(OH)2, while aluminum hydroxide is a white, crystalline compound. Magnesium hydroxide Mg[tex](OH)_2[/tex] has a polymeric structure and is slightly soluble in water, while aluminum hydroxide Al[tex](OH)_3[/tex] is an ionic compound that is highly soluble in water.

When mixed with water, the magnesium hydroxide reacts according to the following equation:

Mg[tex](OH)_2[/tex]+ [tex]H_2O[/tex] →[tex]Mg_2[/tex]+ + 2[tex]OH^-[/tex]

The aluminum hydroxide reacts according to the equation:

Al [tex](OH)_3[/tex]+ [tex]H_2O[/tex] → [tex]Al_3[/tex]+ + 3[tex]OH^-[/tex]

These equations show that magnesium hydroxide releases one hydroxide ion, while aluminum hydroxide releases three hydroxide ions.

Hence ,  This difference in hydroxide ion release is why magnesium hydroxide and aluminum hydroxide have different chemical behaviors.

To know more about Atomic structure refer here :

https://brainly.com/question/14214017

#SPJ11

which statement is true about a chemical reaction at equilibrium? select one: the forward reaction has reached completion. the mass of the products is equal to the mass of the reactants. the reverse reaction has reached completion. the forward reaction rate is equal to the reverse reaction rate.

Answers

The statement which is true about a chemical reaction at equilibrium is "the forward reaction rate is equal to the reverse reaction rate". This is because no change in concentration is observed at equilibrium.

What is Equilibrium?

Equilibrium is defined as the point at which the forward reaction rate is equal to the reverse reaction rate. At this point, the concentration of reactants and products does not change over time, which means that the reaction has reached a steady state. The other options listed in the question are not true about a chemical reaction at equilibrium. The forward reaction does not reach completion, as the reaction is ongoing, and the reverse reaction also does not reach completion.

The mass of the products may or may not be equal to the mass of the reactants, depending on the reaction in question. However, this is not a defining characteristic of a chemical reaction at equilibrium. A chemical reaction at equilibrium is defined by the fact that the forward and reverse reaction rates are equal. This can be represented using the equilibrium constant (K), which is equal to the ratio of the product concentrations to the reactant concentrations raised to their respective stoichiometric coefficients. At equilibrium, the value of K does not change over time.

Learn more about Chemical reaction here:

https://brainly.com/question/29039149

#SPJ11

how many molecules are in 7 moles of carbon dioxide molecules?​

Answers

There are 4.2x1024 molecules in 7 moles of CO2
Atomic mass of [tex] \sf CO_{2} [/tex] -

[tex] \sf \implies 12 + ( 16\times 2) \\ [/tex]

[tex] \sf \implies 12 + 32 \\ [/tex]

[tex] \sf \implies 44 \\ [/tex]

That means one mole of [tex] \sf CO_{2} [/tex]has a mass of 44 g.

1 mole of carbon dioxide is equal to [tex] \sf 6.02 \times 10^{23}\\ [/tex] molecules of carbon dioxide.Then, 7 moles is equal to -

[tex] \sf \implies 7\times 6.02\times 10^{23} molecules \\ [/tex]

[tex] \sf \implies 4.214 \times 10^{24} \\ [/tex]

A neutralization reaction produces H2O and LiNO3. Select the acid-base reactants for this neutralization reaction.
Group of answer choices
LiOH
HNO
LiNO
HNO3
HLi

Answers

The acid-base reactants for this neutralization reaction are LiOH and HNO3.

Explanation : Acid-base reactants for this neutralization reaction are LiOH and HNO3.The reaction between an acid and a base to form a salt and water is known as a neutralization reaction. It is an exothermic reaction because heat is generated when the acid and base are mixed. The products of the reaction are a salt and water (H2O).The neutralization reaction produces H2O and LiNO3. The neutralization reaction between LiOH and HNO3 forms LiNO3 and H2O as products.What is LiOH?LiOH is an alkali compound that is a base with a pH greater than 7. It is commonly known as lithium hydroxide. It is a highly corrosive substance that is used in a variety of industrial processes. It is used in the manufacture of lithium batteries, as well as in rocket fuel, in the purification of natural gas, and as a carbon dioxide absorbent.What is HNO3?Nitric acid is also known as aqua fortis, and it is a highly corrosive mineral acid. It is a potent oxidizing agent that is highly reactive with metals, creating flammable gases upon reaction. It is primarily used in the manufacture of fertilizers, explosives, and various organic chemicals. Nitric acid is a highly corrosive and toxic substance, and proper care should be taken when working with it.

For more such questions on Acid Base

https://brainly.com/question/23008798

#SPJ11

Carbon dioxide gas is collected in a laboratory experiment to determine the molar mass of the compound. At 294 Kand 1.01 atm, 1.008 grams of co2 was collected when a 500 mL flask was filled with the evolved co2. What is the experimental molar mass of co2? a. 41.5 g/molb., 44.0 g/mol c. 46.9 g/mol d 48.2 g/mol

Answers

The experimental molar mass of CO2 collected in a laboratory experiment is 44.0 g/mol.

When carrying out laboratory experiments, carbon dioxide gas is collected to determine the molar mass of the compound. When a 500 mL flask was filled with the evolved CO2 at 294 K and 1.01 atm, 1.008 grams of CO2 was collected. It is required to determine the experimental molar mass of CO2. To solve the problem, we will make use of the ideal gas law formula:

P.V = n.R.T Where,P = 1.01 atmV = 500 mL = 0.500 Ln = number of moles of CO2R = 0.0821 L.atm.K-1.mol-1T = 294 K Substituting the values in the formula, we get;1.01 atm × 0.500 L = n × 0.0821 L.atm.K-1.mol-1 × 294 K1.01 × 0.500 = n × 24.79n = (1.01 × 0.500) / 24.79n = 0.02039 moles of CO2. We know that the mass of CO2 that was collected is 1.008 grams.Therefore, the molar mass of CO2 = mass / number of moles = 1.008 g / 0.02039 mol = 49.38 g/mol

But, we know that CO2 has a molar mass of 44.01 g/mol. Hence, the value of 49.38 g/mol is not the experimental molar mass of CO2 and so, we have to calculate the experimental molar mass of CO2 as follows:Experimental molar mass of CO2 = mass / number of moles = 1.008 g / 0.02039 mol = 49.38 g/mol. Actual molar mass of CO2 = 44.01 g/mol.

Experimental error = | experimental value - actual value | / actual value × 100%.Substituting the values in the formula, we get;

Experimental error = | 49.38 - 44.01 | / 44.01 × 100%

Experimental error = 12.2% ≈ 12%.

Therefore, the experimental molar mass of CO2 is 44.0 g/mol (Option b).

More on molar mass: https://brainly.com/question/18879890

#SPJ11

Calculate the pH at 25°C of a 0.49M solution of ethylammonium bromide C2H5NH3Br . Note that ethylamine C2H5NH2 is a weak base with a pKb of 3.19 . Round your answer to 1 decimal place.

Answers

Answer:

pH = 12.7

Step-by-step Explanation:

The first step is to write the chemical equation for the dissociation of ethylammonium bromide:

C2H5NH3Br + H2O ⇌ C2H5NH2 + H3O+ + Br-

We can then write the equilibrium constant expression, Kc:

Kc = [C2H5NH2][H3O+][Br-] / [C2H5NH3Br][H2O]

At equilibrium, the concentration of water is essentially constant, so we can simplify the expression:

Kc = [C2H5NH2][H3O+][Br-] / [C2H5NH3Br]

We can also write the expression for the base dissociation constant, Kb:

Kb = [C2H5NH2][OH-] / [C2H5NH3+]

The relationship between Kb and Kc is:

Kb x Ka = Kw

where Ka is the acid dissociation constant for water (1.0 x 10^-14 at 25°C) and Kw is the ion product constant for water (also 1.0 x 10^-14 at 25°C).

We can rearrange this equation to solve for Kb:

Kb = Kw / Ka = 1.0 x 10^-14 / 1.0 x 10^-14 = 1.0

Since Kb is defined as [C2H5NH2][OH-] / [C2H5NH3+], we can solve for [OH-]:

Kb = [C2H5NH2][OH-] / [C2H5NH3+]

[OH-] = Kb x [C2H5NH3+] / [C2H5NH2]

We can use the relation between [H3O+] and [OH-]:

Kw = [H3O+][OH-] = 1.0 x 10^-14

[H3O+] = Kw / [OH-]

[H3O+] = Kw / (Kb x [C2H5NH3+] / [C2H5NH2])

[H3O+] = (1.0 x 10^-14) / (1.0 x [C2H5NH3+] / [C2H5NH2])

We can then substitute in the concentration of ethylammonium bromide:

[H3O+] = (1.0 x 10^-14) / (1.0 x 0.49 / 1.0)

[H3O+] = 2.04 x 10^-13 M

The pH is defined as the negative logarithm of the concentration of hydronium ions:

pH = -log[H3O+]

pH = -log(2.04 x 10^-13)

pH = 12.7

Therefore, the pH of a 0.49 M solution of ethylammonium bromide at 25°C is 12.7 (rounded to 1 decimal place).

which scientist conducted the gold foil experiment and discovered that the atom has a positively charged nucleus in the center, and that most of that atom is empty space?rutherfordgoldsteinalessandro volta

Answers

Ernest Rutherford is the physicist who carried out the gold foil experiment and found that the atom has a positively charged nucleus in the centre and that the majority of that atom is empty space.

The gold foil experiment was carried out in 1911 by Ernest Rutherford, who attacked a thin sheet of gold foil with alpha particles and tracked their scattering patterns.

Based on his discoveries, he put forth the nuclear model of the atom, which argues that the majority of the atom is made up of empty space and contains a positively charged nucleus at its core. The advancement of the contemporary atomic theory was greatly aided by this experiment.

learn more about positively charged nucleus here:

https://brainly.com/question/1549147

#SPJ4

Write a chemical equation for HNO3(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answer.Part CWrite a chemical equation for HF(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answe

Answers

Part A The chemical equation for HNO3  showing it is acid is:-

HNO3 (aq) → H+ (aq) + NO3- (aq)

The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.

Part B The chemical equation for HF showing it is acid is:-

HF (aq) → H+ (aq) + F- (aq)

The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.

HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).

Learn more about Arrhenius:

https://brainly.com/question/14739712

#SPJ11

When it fails to occur, is the chemical basis for a metabolic syndrome in which the body fails to breakdown fatty acids?

Answers

Yes, the chemical basis for a metabolic syndrome is the failure of the body to breakdown fatty acids.

What is Metabolic syndrome?

Metabolic syndrome is used to describe a collection of health problems that increase the risk of developing other diseases such as diabetes, heart disease, and stroke. The primary cause of metabolic syndrome is obesity, which is why it is frequently referred to as "obesity syndrome."

The syndrome is also linked to other genetic and environmental factors that contribute to insulin resistance, inflammation, and high blood pressure, as well as a failure to break down fatty acids properly in the body. Thus, the chemical basis for metabolic syndrome is the failure to break down the fatty acids in body. This chemical problem can contribute to the development of other fatal diseases and health problems.

Learn more about Metabolic syndrome here:

https://brainly.com/question/31106238

#SPJ11

Indicate which substance in each of the following pairs of substances you expect to have higher entropy. assume that you have a mole of each substance and all substances are at the same temperature? a. H2S2(g) b. H2S2(l) [Choose] a. CsBr(s) b. Sro(s) [Choose] a. H2O(l) b. H2O2(l) [Choose ] a. SO3(g) b. SO3(s) [Choose]

Answers

H₂S₂(g) is expected to have higher entropy than H₂S₂(l). CsBr(s) is expected to have higher entropy than Sro(s). H₂O(l) is expected to have higher entropy than H₂O₂(l). SO₃(g) is expected to have higher entropy than SO₃(s).


What is Entropy?

The entropy of the substance is determined by the amount of randomness and disorder it has. The higher the entropy, the greater the randomness of the substance. At the same temperature and pressure, a pure solid has a lower entropy than a pure liquid, which in turn has a lower entropy than a pure gas. The entropy of a substance is determined by its physical state, molecular structure, and the quantity of the substance.
H₂S₂ is a chemical compound with two sulfur atoms and two hydrogen atoms. The state of H₂S₂(g) is a gas, and H₂S₂(l) is a liquid. Since the gas state is more disordered than the liquid state, H₂S₂(g) is expected to have higher entropy than H₂S₂(l).
Both CsBr(s) and Sro(s) are in the solid-state. However, CsBr(s) has a higher entropy than Sro(s) because it has more molecules. This means that CsBr(s) has a greater degree of randomness and disorder than Sro(s).
H₂O(l) and H₂O₂(l) are both liquid states, but H₂O(l) has higher entropy because it has more degrees of freedom. H₂O(l) can rotate and translate freely, while H₂O₂(l) has a rigid structure that does not allow for the same degree of movement.
SO₃(g) is in the gaseous state, while SO₃(s) is in the solid-state. At the same temperature, the entropy of SO₃(g) is greater than that of SO₃(s) because the gas state is more disordered than the solid-state.

Learn more about Entropy here:

https://brainly.com/question/20166134

#SPJ11

A neutralization reaction produces H2O and CaCl2. Select the acid-base reactants for this neutralization reaction.
Group of answer choices
H2Ca
CaCl2
HCl
Ca(OH)2
CaO

Answers

The acid-base reactants for the neutralization reaction that produces H2O and CaCl2 are Ca(OH)2 and CaO. This is a double displacement reaction, meaning that two reactants switch ions to form two new products. In this reaction, the acid (H+ ions) reacts with the base (OH- ions) to form H2O, and the cation (Ca2+ ions) from the base reacts with the anion (Cl- ions) from the acid to form CaCl2.

The balanced equation for this neutralization reaction is as follows:

Ca(OH)2 + CaO → H2O + CaCl2

Explanation: Neutralization reaction is defined as the reaction between acid and base to form salt and water as by-products. In this reaction, the acid and the base cancel each other’s acidic and basic properties to form water and salt.Therefore, the acid-base reactants for this neutralization reaction are Ca(OH)2 and CaO. The reaction can be represented as follows:Ca(OH)2 + CaO → CaCl2 + H2O Calcium hydroxide and calcium oxide are both bases that react with hydrochloric acid (HCl) to form calcium chloride and water. The reaction can be represented as follows:Ca(OH)2 + 2HCl → CaCl2 + 2H2OCaO + 2HCl → CaCl2 + H2OTherefore, if H2O and CaCl2 are produced as the by-products, it indicates that the acid-base reactants in this neutralization reaction are Ca(OH)2 and CaO. The calcium hydroxide and calcium oxide have basic properties that neutralize the acidic properties of hydrochloric acid (HCl) to form salt (calcium chloride) and water.

For more such questions on neutralization

https://brainly.com/question/12855050

#SPJ11

g the free energy associated with the proton gradient that develops across the inner mitochondrial membrane as a result of the electron transport chain is 23.3 kj per mole of protons. if fadh2 is the only electron donor to the electron transport chain, how many moles of fadh2 would be required to produce a proton gradient in which exactly one mole of protons have been pumped across the membrane, assuming we start with no gradient? the standard reduction potential of fadh2 is 0.10 v, and that of o2 is 0.81 v. select the closest value from the options below. a) 3 mol fadh2 d) 0.17 mol fadh2 b) 1 mol fadh2 e) 5.8 mol fadh2 c) 0.5 mol fadh2

Answers

The number of moles of FADH₂ required to produce a proton gradient is 0.17 mol. This can be calculated through the free energy and potential difference. Thus, the correct option is D.


What is the required number of moles of FADH₂?

There are 6.022 × 10²³ protons per mole of H⁺. Therefore, one mole of H⁺ contains 1 mole of protons.

The change in potential between FADH₂ and O₂ is: ΔE°' = E°'(O₂) - E°'(FADH₂)

ΔE°' = 0.81 - 0.10

ΔE°' = 0.71 V

ΔG for electron transfer from FADH₂ to O₂ is: ΔG°' = -nFΔE°'

where, n = number of electrons, F = Faraday's constant (96,500 J/V), and ΔE°' is the change in potential between the two half-cells.

We know that n = 2 (since FADH₂ transfers two electrons to O₂).

ΔG°' = -2 × (96,500) × (0.71)

ΔG°' = -137,860 J/mol

ΔG° = -nFΔΨ

where, n = number of protons, F = Faraday's constant (96,500 J/V), and ΔΨ is the change in potential across the membrane. We know that n = 1 (since we want to pump one mole of H⁺ across the membrane).

ΔΨ = ΔG°/(nF)

ΔΨ = (-137,860)/(1 × 96,500)

ΔΨ = -1.43 V

ΔG = ΔG° + RTlnQ

where, R = gas constant (8.31 J/molK), T = temperature in Kelvin (298 K), and Q = reaction quotient.

Since the reaction is at standard conditions, Q = 1 (since all the reactants and products are in their standard states).

ΔG = ΔG°

ΔG = -137,860 J/mol

ΔG = -137.86 kJ/mol

23.3 kJ/mol = n × (1.43 V)

n = 0.17

Therefore, 0.17 mol of FADH₂ is required.

Therefore, the correct option is D.

Learn more about Potential difference here:

https://brainly.com/question/9358420

#SPJ11

which of the following compounds reacts in the atmosphere to produce aerosols which reduces the amounts of solar radiation absorbed by the earth's surface? question 4 options: n2o so2 ko2 ch4

Answers

The compound that reacts in the atmosphere to produce aerosols which reduces the amounts of solar radiation absorbed by the earth's surface is SO₂. The correct option is B.

Which compound reacts in the atmosphere to produce aerosols?

SO₂ reacts with atmospheric water and oxygen to produce aerosols such as sulfuric acid and sulfate aerosols that scatter sunlight and, therefore, reduce the amount of solar radiation that reaches the Earth's surface. Because of this property, SO₂ has a major influence on the Earth's climate and atmosphere. It is harmful to the environment and is generated by human activities such as the burning of fossil fuels like coal and petroleum, as well as volcanoes, and geothermal springs.

Acid rain, global warming, and respiratory illnesses are all caused by this gas. As a result, SO₂ emission control measures are necessary to protect the environment and human health.

Therefore, the correct option is B.

Read more about atmosphere here:

https://brainly.com/question/24925283

#SPJ11

Scenario 1: The magnets are equal strength. Predict: How would the overall kinetic energy in the system change? Why?​

Answers

Answer:

Magnetized objects move in the direction that reduces their magnetic potential energy. This is no different than the skate park.

Explanation:

In the illustration, which solute will dissolve first? A) solute in tank B will dissolve first B) solute in tanks A and B will dissolve at equal rates C) solute in tank A will dissolve first

Answers

A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.

in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.

learn more about solute in tank  here:

https://brainly.com/question/9589556

#SPJ4

AgWhich of the following will produce a new compound if added to a beaker containing an aqueous solution of copper II sulfate (CuSO4)?
THERE IS MORE THAN ONE ANSWER
Ag
Cu
Fe
Sn
H2
So4
Pt

Answers

Ag, Fe, and Sn will produce new compounds if added to a beaker containing an aqueous solution of copper II sulfate (CuSO4).

Ag (silver) - Ag will react with CuSO4 to form Ag2SO4 (silver sulfate) and Cu (copper).

Fe (iron) - Fe will react with CuSO4 to form FeSO4 (iron sulfate) and Cu (copper).

Sn (tin) - Sn will react with CuSO4 to form SnSO4 (tin sulfate) and Cu (copper).

Therefore, Ag, Fe, and Sn will produce new compounds if added to a beaker containing an aqueous solution of copper II sulfate (CuSO4).

What is an aqueous solution?

An aqueous solution is a solution in which the solvent is water. In other words, an aqueous solution is a solution in which one or more substances (called solutes) are dissolved in water (the solvent). Water is a highly polar molecule, which means that it can dissolve many substances that have charged particles, such as ions or polar molecules.

To know more about aqueous solution, visit:

https://brainly.com/question/26856926

#SPJ1

To qualitatively aid in differentiating malabsorption and maldigestion, 2 slides are made from the stool specimen, pretreated with ethanol (slide 1) or acetic acid (slide 2) and stained with?eosin-nigrosinoil red Osafraninmethylene blue

Answers

The two slides prepared from a stool specimen for the purpose of differentiating malabsorption and maldigestion are prepared using ethanol (slide 1) or acetic acid (slide 2) and then stained with Eosin-Nigrosin. Oil Red O, and Methylene Blue. Eosin-Nigrosin is used to detect fats, Oil Red O detects neutral fats, and Methylene Blue detects starch. If there is an abnormally high presence of fat and starch, it is indicative of malabsorption. If the presence of fat is normal but the presence of starch is abnormally high, it suggests maldigestion.

Ethanol is used in slide 1 as it preserves the shape of the neutral fats for observation. Acetic acid is used in slide 2 to dissolve the neutral fats, thereby allowing for the visualization of starch granules which would otherwise be hidden by the fat droplets.  

Eosin-Nigrosin, Oil Red O, and Methylene Blue work in tandem to provide a visual understanding of the digestive processes that have taken place, enabling the physician to diagnose the patient. This diagnostic method is relatively simple and non-invasive, making it a viable choice for most patients.

Know more about malabsorption here:

https://brainly.com/question/13171783

#SPJ11

What is the tendency of electrons to enter orbitals of lowest energy first? A. atomic orbital B. Aufbau principle C. electron configuration D. ground state E. Pauli exclusion principle F. Heisenberg uncertainty principle

Answers

The tendency of electrons to enter orbitals of lowest energy first is known as the Aufbau principle. In chemistry, the Aufbau principle is used to predict the ground state of an atom and to understand the electronic structure of elements.

Aufbau principle is the method of building an atom's electronic structure by adding electrons one at a time to the lowest energy orbitals available until all of the electrons have been added.

The lowest-energy orbitals, such as 1s, are filled with electrons first because electrons have the most negative charge and are thus drawn to the positively charged atomic nucleus. Electrons in orbitals of equal energy (such as the three 2p orbitals) must occupy each of them singly before they begin pairing up to form electrons pairs (spin pairing). To avoid filling two orbitals of the same energy with electrons, electrons must fill singly first.

The Aufbau principle governs the order in which orbitals are filled and explains why the electron configuration of each atom is unique.

In a nutshell, the tendency of electrons to enter orbitals of lowest energy first is known as the Aufbau principle.

For more question on Aufbau principle click on

https://brainly.com/question/568574

#SPJ11

what is the mechanism of action for the citrate synthase 2-part reaction? a. hydrolysis followed by condesation b. condensation followed by hydrolysis c. decarboxylation followed by hydrolysis d. decarboxylation followed by condensation

Answers

The mechanism of action for the citrate synthase 2-part reaction is decarboxylation followed by condensation.

This reaction is the first and the most critical reaction of the Krebs cycle, which is also called the tricarboxylic acid cycle or the citric acid cycle. The Krebs cycle is a series of enzymatic reactions that occur in the mitochondria of eukaryotic cells.

The Krebs cycle is critical in the metabolic process because it oxidizes the pyruvate generated during glycolysis, produces ATP and reduces coenzymes, and ultimately prepares substrates for the electron transport chain. It is a cyclic reaction consisting of eight steps, with citrate synthase catalyzing the first reaction.

The reaction mechanism of citrate synthase is as follows:

Citrate synthase catalyzes the conversion of acetyl CoA and oxaloacetate to citrate by a decarboxylation reaction followed by a condensation reaction. The decarboxylation reaction is the first step, in which acetyl-CoA loses its acetyl group in the form of carbon dioxide (CO2), producing the four-carbon compound oxaloacetate. This reaction is irreversible and is the rate-limiting step of the cycle. Citrate synthase then catalyzes the condensation reaction, in which the acetyl group of acetyl-CoA is added to the oxaloacetate molecule to form citrate, a six-carbon compound.

The mechanism of action for the citrate synthase 2-part reaction is, therefore, decarboxylation followed by condensation.

To know more about decarboxylation click here:

https://brainly.com/question/29573197

#SPJ11

determine the limiting reactant: naoh (aq) hcl (aq) --> h2o (l) nacl (aq) (balanced) 10 moles of naoh reacts with 12 moles of hcl.

Answers

NaOH (aq) + HCl (aq) → H2O (l) + NaCl (aq). The stoichiometric coefficient of NaCl is 1, so it will produce the same amount of moles as NaOH.

To determine the limiting reactant in this equation, the first step is to calculate the number of moles of each reactant available.

10 moles of NaOH and 12 moles of HCl are available, so we can use these values.

Then, we need to compare the calculated moles to the stoichiometric coefficients in the balanced equation.

The reactant that produces the least amount of product is the limiting reactant.

Let us begin with the number of moles of NaOH:

10 mol NaOH × (1 mol HCl / 1 mol NaOH) = 10 mol HCl

This means that if 10 mol of NaOH reacts, then 10 mol of HCl is also consumed.

Next, we calculate the number of moles of HCl available:

12 mol HCl × (1 mol NaOH / 1 mol HCl) = 12 mol NaOH

So if 12 mol of HCl is reacted, then 12 mol of NaOH is consumed.

Since we have more HCl than NaOH, the limiting reactant is NaOH.

Therefore, NaOH is the limiting reactant in this reaction.

We can also determine the maximum amount of NaCl that can be produced from this reaction by using the moles of NaOH. The stoichiometric coefficient of NaCl is 1, so it will produce the same amount of moles as NaOH.

Therefore, 10 mol of NaOH can produce a maximum of 10 mol of NaCl.

Learn more about limiting reactants: https://brainly.com/question/26905271

#SPJ11

Other Questions
Define the term public participation in sport and expand your answer by giving two example Selecteaz din text un fragment care arat n ce con-st, dup flcu, ,,procopseala which river was so badly polluted that it caught fire several times? 6x+4xy+3y+13xy+8x+2 Divide polynomials an object starts from rest at when the object moves in the x direction with positive velocity after the instantaneous velocity and average velocity are related by (a) (b) (c) (d) can be larger than, smaller than, or equal to subordinated indentures have claims against the firm's assets that are junior to the claims of both mortgage bonds and regular indentures. a. true b. false FILL IN THE BLANK The cost of a lease (or any input) is fixed in the ____ run, but not fixed in the ____ run. Here is a scale drawing of a garden. Tom wants to plant a tree in the garden according to the following rules: It must be 4 m from A and 2 m from CD. Place a cross where Tom can plant the tree. D 2.5 cm A 4 cm C B 1 cm represents 2m which of the following factors would keep a person from changing in this situation? check all that apply. WILL GIVE BRAINLIEST!!!Does pandora use any Digital Rights Management (DRM) to control or limit what you can do with the content it provides you access to? One of your clients purchases a municipal bond at issuance. The bond is purchased at a premium and the customer pays 107 for the bond. Which of the following is true regarding the tax treatment of the premium?[A] The bondholder will have no tax consequences at maturity of the bond.[B] The bondholder can immediately deduct the premium amount from ordinary income taxes owed for the year in which the bond was purchased.[C] The bondholder can write off the premium amount as a capital loss in the year of the bond's maturity.[D] The bondholder must hold the bond for a minimum of 1 year, after which the bondholder can write off the premium amount as a capital loss. Postindustrial:The economy of the US is said to be in a postindustrial phase. which of these would most accurately describe this phase?A. Deemphasis on the need for imports to the USB. increased demand for workers in high-tech and service industriesC. increased investment in all industries.D. Reemergence of the importance of primary industries the company's break-even in unit sales is closest to: (round your intermediate calculations to 2 decimal places.) 27. Let W be a subspace, and let S be a spanning set for W. Find a basis for W, and calculate dim(W) for each set S. a) S = COCIOC) 3 0 2 -2 b) S= -2 1 2 2 2 shown below is a small particle of mass 25.0 g that is moving at a speed of 9.3 m/s when it collides and sticks to the edge of a uniform solid cylinder. the cylinder is free to rotate about its axis through its center and is perpendicular to the page. the cylinder has a mass of 0.460 kg and a radius of 9.3 cm, and is initially at rest. what is the angular velocity of the system after the collision? Toxins and antibiotics and heavy metals from industrial pollutants are chemical hazards commonly found in The Invasion of the LionfishWhat was once just an attractive aquarium fish has recently become one of the biggest menaces in the Atlantic. The lionfish was accidentally introduced into the Atlantic Ocean in the 1990s. Because it has no natural predators, it has adapted quickly to its new home. The lionfish now threatens to destroy native fish populations in the Atlantic, Caribbean, and Gulf of Mexico.The lionfish spreads quite rapidly. Lionfish spread faster than any other invading species. Experts have called the invasion in the Atlantic the worst marine invasion of all time. The lionfish's success comes from an ability to reproduce all year round. In addition, they are greedy eaters with a fondness for small fish and crustaceans. They will eat anything smaller than they are. Lionfish love the warm waters of the Gulf of Mexico. Since their first sighting, they have rapidly multiplied. In some locations, scientists estimate that lionfish populations exploded by 700 percent between 2004 and 2008 alone.To combat the invasion, wildlife agencies have sponsored lionfish derbies. In these derbies, local scuba divers are invited to harvest lionfish. In addition, many states offer recipes for preparing and eating lionfish to encourage harvesting. Lionfish have to be handled carefully because of their venomous spines, but they are apparently delicious. Increasing the harvest of lionfish will help. However, scientists estimate that more than a quarter of the population would have to be taken every month to stop the growing population.The lionfish has targeted our most fragile and important ecosystems. Scientists are working tirelessly to learn as much as they can about this predator. We may never be able to completely remove the threat, but many fishermen and seafood fans are hoping we can figure out how to control it.Work CitedWilcox, Christie. "The Worst Marine Invasion Ever." Slate. July 1, 2013.Read this line from the text:The lionfish has targeted our most fragile and important ecosystems.What does fragile mean in this sentence? (5 points) aFrail bFlexible cResilient dSubstantial Brittany needed new tires for her truck. She went to the auto shop and bought 4 tires on sale for $85.95 each. The salesman told her that she saved a total of $96.16. If Brittany saved the same amount on each tire, what was the original price of each tire?The best solution gets brainlist A slingshot consists of a light leather cup attached between two rubber bands. It takes a force of 33 N to stretch the bands 1.3 cm.A) What is the equivalent spring constant of the rubber bands? Answer in n/m.B) How much force is required to pull the cup of the slingshot 4.2 cm from its equilibrium position? Answer in units of N. How does economic development affect diffusion?