The percentage yield of CaSO3 is approximately 69%.
CaCO3 + SO2 → CaSO3 + CO2
Number of moles of CaCO3 = 255 g / 100.09 g/mol = 2.549 mol
Number of moles of SO2 = 135 g / 64.06 g/mol = 2.109 mol
Since the reaction is 1:1 stoichiometric, the number of moles of CaSO3 formed is 2.109 mol. We can then calculate the theoretical yield of CaSO3:
Theoretical yield of CaSO3 = 2.109 mol x 136.14 g/mol = 286.9 g
Percentage yield = (Actual yield / Theoretical yield) x 100%
The actual yield is given as 198 g. Plugging in the values, we get:
Percentage yield = (198 g / 286.9 g) x 100% ≈ 69%.
Stoichiometric is the study of the quantitative relationship between reactants and products in a chemical reaction. The stoichiometric ratio is the ratio of the moles of one substance to the moles of another substance in a chemical reaction.
For example, consider the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). The balanced chemical equation for this reaction is 2H2 + O2 → 2H2O. The stoichiometric ratio for this reaction is 2:1. This means that for every two moles of hydrogen gas reacted, one mole of oxygen gas is required to completely react with it and form two moles of water.
Stoichiometric is important in chemical reactions because it allows us to determine the number of reactants needed to produce a certain amount of product or the amount of product that can be produced from a given amount of reactants. This information is crucial in industrial and laboratory settings where the cost of materials and the desired yield of the product are important factors.
To learn more about Stoichiometric visit here:
brainly.com/question/6907332
#SPJ4
Eight moles of glucose have been oxidized under aerobic conditions. How many total moles of CO2 were produced? Enter a number below.
48 moles of CO2 were produced from 8 moles of glucose under aerobic conditions.
Eight moles of glucose have been oxidized under aerobic conditions, and we need to find the total moles of CO2 produced.
For this purpose, we will utilize the balanced chemical equation for the complete combustion of glucose.
The balanced equation is given as below: C6H12O6 + 6O2 → 6CO2 + 6H2O
From the above equation, we can see that one mole of glucose produces six moles of carbon dioxide.
Therefore, eight moles of glucose will produce 8 × 6 = 48 moles of carbon dioxide.
So, the total moles of CO2 produced are 48.
Learn more about glucose: brainly.com/question/397060
#SPJ11
the procedure for making zeolite is carried out in an acidic medium. true or false
The statement "the procedure for making zeolite is carried out in an acidic medium" is False.
Zeolite is a crystalline aluminosilicate mineral that occurs naturally.
It is widely used in various applications, including water purification, agriculture, and petrochemical refining.
Zeolites can be synthesized in the laboratory using different methods, such as hydrothermal and sol-gel methods.
The zeolite synthesis process is carried out in an alkaline or basic medium, not in an acidic medium.
Alkaline solutions, such as sodium hydroxide or potassium hydroxide, are commonly used to initiate the synthesis reaction, which involves the reaction of a source of silica, such as silicate, with a source of alumina, such as aluminate, in the presence of water and other chemical agents.
There are various types of zeolites with different chemical compositions, crystal structures, and properties.
The specific synthesis conditions, such as temperature, pressure, and reaction time, can also affect the final properties of the zeolite.
Therefore, the synthesis of zeolites requires precise control of the reaction conditions to obtain the desired properties.
Zeolites have a unique structure that can adsorb and exchange ions and molecules.
This property makes them useful in various applications, such as catalysis, separation, and ion exchange.
Zeolites can also be modified or functionalized to enhance their properties for specific applications.
For similar question on zeolite.
https://brainly.com/question/14976531
#SPJ11
Chemistry Assertion and Reasoning
B) Assertion and Reasoning Direction: in the following questions, a statement followed by a statement of reason (R).
Mark the correct choice as:
(A) Both Assertion (a) And Reason (R) Are true and Reason (R) Is thd correct explanation of assertion (A)
(B) Both Assertion (A) And reason ( R) Are true but Reason (R) Is not correct explanation of assertion (A)
(C) Assertion (A) is true but reason ( R) is false
(D) Assertion (A) is false but reason (R) is true
Assertion: Calcium And Argon are isobars
Reason: Calcium And Argon Have Same Mass Numbers
Assertion: the number of valence electrons in oxygen atoms is 6
Reason: the valency of Oxygen atom is 6
Assertion: most of the Alpha Particles in Rutherfords experiment passed straight through gold foil
Reason: The Centre Of The Atom Is Positively Charged
Answer ASAP PLEASE!
1. Calcium and Argon are isobars , the correct answer is (A). 2. number of valence electrons in oxygen atoms is 6, the correct answer is (B) 3. most of the alpha particles deflected, the correct answer is (D).
Describe Protons?Protons are subatomic particles that are found in the nucleus of an atom. They have a positive electrical charge, which is equal and opposite to the negative charge of electrons, the other subatomic particle found in atoms. The number of protons in the nucleus of an atom determines what element the atom is.
The mass of a proton is approximately 1 atomic mass unit (amu), which is about 1.673 x 10⁻²⁷ kg. This is slightly less than the mass of a neutron, which is another subatomic particle found in the nucleus of an atom.
1. The correct answer is (A) Both Assertion (A) and Reason (R) are true, and Reason (R) is the correct explanation of Assertion (A).
The statement in Assertion is true that Calcium and Argon are isobars because they have the same mass number (40). Isobars are atoms of different elements that have the same mass number but different atomic numbers.
The statement in Reason is also true and provides the explanation for Assertion because the mass number of an atom is equal to the sum of the number of protons and neutrons in its nucleus. Calcium has 20 protons and 20 neutrons, giving it a mass number of 40. Argon has 18 protons and 22 neutrons, also giving it a mass number of 40. Therefore, they have the same number of nucleons and are isobars.
Therefore, option (A) is the correct answer.
2. The correct answer is (B) Both Assertion (A) and Reason (R) are true but Reason (R) is not the correct explanation of Assertion (A).
The statement in Assertion is true that the number of valence electrons in oxygen atoms is 6. Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions.
The statement in Reason is also true, but it does not provide the correct explanation for Assertion. Valency refers to the combining capacity of an atom, and it is determined by the number of valence electrons. The valency of oxygen is 2, not 6. Oxygen has 6 valence electrons, but it forms two covalent bonds to complete its octet in most compounds, giving it a valency of 2.
Therefore, option (B) is the correct answer.
3. The correct answer is (D) Assertion (A) is false but reason (R) is true.
The statement in Assertion is false because most of the alpha particles in Rutherford's experiment were deflected at various angles, and only a few passed straight through the gold foil. This observation led Rutherford to propose the nuclear model of the atom.
The statement in Reason is true. The center of the atom, or nucleus, is positively charged because it contains protons, which have a positive charge. Electrons, which have a negative charge, orbit the nucleus in a cloud-like distribution.
Therefore, option (D) is the correct answer.
To know more about atom visit:
https://brainly.com/question/30282087
#SPJ1
¿Con qué intención o propósito vamos a escribir las recomendaciones? ¿A quién(es) van dirigidas las recomendaciones? ¿Con qué lenguaje debemos escribirlas? ¿Cuántas recomendaciones incluiremos en nuestro texto? Paso 2: Formular las ideas generales que se abordarán en las recomendaciones y la secuencia que estas tendrán ¿Qué ideas de recomendaciones puedo incluir en mi texto? ¿Cuáles de las recomendaciones elaboradas en las actividades previas vamos a incluir en nuestro texto? ¿Qué otras ideas de recomendaciones podemos incluir en nuestro texto? ¿Qué tipo de letra nos ayudará a que nuestro texto sea atractivo? ¿Con qué imágenes podemos acompañar a nuestro texto? ¿Cómo distribuiremos, en toda la página, las recomendaciones y las imágenes?
The purpose of the recommendations is to provide guidance and advice on a particular topic, and they are typically directed towards a specific audience or group. The language, number, and content of the recommendations will vary depending on the context and purpose. The font and images used should be appropriate and visually appealing.
The questions above pertain to the process of writing recommendations, which involves determining the purpose, target audience, language, and structure of the text. The recommended ideas should be formulated in a logical sequence and should include a mix of existing and new ideas. The text should be written in an attractive font and accompanied by relevant images that support the recommendations. The overall goal is to present the recommendations in a clear and compelling manner that motivates the target audience to take action. By following these guidelines, the resulting text should effectively communicate the recommendations and their intended impact.
To know more about recommendations, here
brainly.com/question/12314151
#SPJ4
--The complete question is, What is the purpose or intention behind writing the recommendations? Who are the recommendations directed towards? In what language should they be written? How many recommendations should be included in our text? Step 2: Formulate the general ideas that will be addressed in the recommendations and the sequence they will follow. What recommendation ideas can be included in our text? Which of the recommendations developed in previous activities will be included in our text? What other recommendation ideas can be included in our text? What font will help make our text attractive? What images can we use to accompany our text? How will we distribute the recommendations and images throughout the page?--
2c2h6 + 7o2 = 4co2 + 6h2o
what mass of co2 will be produced from the reaction of 37. 5 g c2h6
The mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.
The balanced chemical equation for the combustion of ethane (C2H6) with oxygen (O2) is:
2C2H6 + 7O2 → 4CO2 + 6H2O
This equation concludes that 2 moles of C2H6 react with 7 moles of O2 to produce 4 moles of CO2 and 6 moles of H2O.
To find the mass of CO2 produced from the reaction of 37.5 g of C2H6, we need to use stoichiometry. Here are the steps to follow:
Calculate the number of moles of C2H6:
moles of C2H6 = mass of C2H6 / molar mass of C2H6
moles of C2H6 = 37.5 g / 30.07 g/mol
moles of C2H6 = 1.248 mol
Use the mole ratio from the balanced chemical equation to calculate the number of moles of CO2 produced:
moles of CO2 = moles of C2H6 × (4 moles of CO2 / 2 moles of C2H6)
moles of CO2 = 1.248 mol × 2
moles of CO2 = 2.496 mol
Calculate the mass of CO2 produced:
mass of CO2 = moles of CO2 × molar mass of CO2
mass of CO2 = 2.496 mol × 44.01 g/mol
mass of CO2 = 109.92 g
Therefore, the mass of CO2 produced from the reaction of 37.5 g of C2H6 is 109.92 g.
To learn more about stoichiometry:
https://brainly.com/question/28780091
#SPJ4
8. Standard reduction potentials are given for reduction half-reactions relative to the hydrogen half-reaction. In Part 1 of this experiment, you will determine reduction potentials rela- tive to the reduction of copper and silver. Predict what the reduction potentials should be relative to the silver and copper electrodes. It may help to think of this as a vertical ruler. As you move the ruler up, the zero shifts up and the numbers change accordingly. E (volts) STANDARD REDUCTION POTENTIALS AT 25°C E (volts) E (volts) Referenced to Referenced to the Hydrogen the Copper Electrode Electrode Half-Reaction Referenced to the Silver Electrode 0.80 0.80 0.0 Ag+ + e + Ag (5) Cu2+ + 2e → Cu () 0.34 0.0 0,34 2H+ + 2e → H2(g) 0.0 Not measured Not measured Fe2+ + 2 e Fe (s) - 0.41 Zn2+ + 2e → Zn (5) - 0.76
The reduction potential of Cu²⁺ is 0.34 volts and the reduction potential of Ag⁺ is 0.8 volts
The reduction potentials of Ag⁺ and Cu²⁺ relative to the silver and copper electrodes, respectively, can be found by using a vertical ruler to shift the zero point of the reference hydrogen half-reaction.
Relative to the silver electrode, the reduction potential of Ag⁺ is 0.8 volts and
The reduction potential of Cu²⁺ is 0.0 volts.
Relative to the copper electrode, the reduction potential of Ag⁺ is 0.0 volts and
The reduction potential of Cu²⁺ is 0.34 volts.
The reduction potentials of the other half-reactions (Fe²⁺, Zn²⁺) cannot be measured relative to the silver and copper electrodes, as they are not included in the vertical ruler.
Learn more about Standard reduction potentials here:
https://brainly.com/question/2731940
#SPJ11
Which of the following foods are complete proteins?a. bread and butterb. animal foods quinoa, or soyc. almonds, peanuts, or cashewsd. potato and sour cream
Calcula el volumen en litros que tendran 2 kg de poliestireno expandidos (densidad = 0,92g/cm3)
2 kg of expanded polyethylene has a volume of 2.17 liters.
Given that,
Density = 0.9g/cm³
Mass = 2kg = 2000g
Density is the substance's mass per unit of volume. Although the Roman letter D may also be used, the sign most frequently used for density is ρ (the lowercase Greek letter rho). A substance's density changes as a function of pressure and temperature. With solids and liquids, this variance is often slight, but for gases, it is much more pronounced.
Density = Mass ÷ Volume
0.92 = 2000 ÷ Volume
Volume = 2000 ÷ 0.92
Volume = 2.17 liters.
Hence, 2 kg of expanded polyethylene has a volume of 2.17 liters.
To learn more about density, refer to:
https://brainly.com/question/26364788
#SPJ4
Your question is in Spanish. The English translation of the question is:
Calculate the volume of 2 kg of expanded polyethylene in liters. ( Density = 0.92g/cm³ )
a student finds an unlabeled bottle of liquid under his kitchen sink. which investigation would best help him identify the unknown liquid as acidic, basic, or neutral?
Titration is the best investigation to identify an unknown liquid as acidic, basic, or neutral by measuring its pH level.
A student finds an unlabeled bottle of liquid under his kitchen sink. Titration is the investigation that would best help him identify the unknown liquid as acidic, basic, or neutral.
Titration is the chemical method used to find the amount of acid or base in a given substance. This method is a laboratory technique used to measure the concentration of a known solution (the titrant) with a solution of an unknown concentration (the analyte).
The unknown solution is slowly added to the known solution until it reacts completely, allowing us to calculate the concentration of the unknown solution. Titration may be used to identify an unknown solution as acidic, neutral, or basic by determining its pH level. It's a highly precise technique that's often used in analytical chemistry laboratories to measure the concentration of chemicals.
Learn more about liquid: https://brainly.com/question/1313076
#SPJ11
Choose the statement that is true at the mid-point, or half-equivalence point, in the titration of a monoprotic weak acid and a strong base. O The moles of strong acid and weak base present in the solution are equal. O The moles of strong base and weak acid present in the solution are equal. O The moles of conjugate base and strong base present in the solution are equal. O The moles of conjugate base and weak acid present in the solution are equal.
Strong base and conjugate base concentrations in the solution are both equal at moles.
At the mid-point of a titration of a weak acid and a strong base, the pH of the solution is equal to the pKa of the weak acid. This is due to the solution's equal amounts of conjugate base and strong base molecules.As the strong base is added, it reacts with the weak acid to produce the conjugate base and the hydrogen ions (H+) are neutralized. At the mid-point, the moles of conjugate base and strong base present in the solution are equal and so the pH of the solution is equal to the pKa of the weak acid.
learn more about conjugate base Refer:brainly.com/question/30225100
#SPJ1
an unknown gas effuses at a rate 0.667 times the rate of co₂. what is the molar mass of the unknown gas?
An unknown gas effuses at a rate 0.667 times the rate of co₂. The molar mass of the unknown gas is 120 g/mol.
The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass. It's known as Graham's law. Graham's Law explains the rate of effusion of a gas through a small hole into a vacuum. The rate of effusion for an ideal gas is proportional to the inverse square root of the gas' molar mass (relative molecular mass). According to the question, the effusion rate of the unknown gas is 0.667 times that of CO₂.
Let the molar mass of the unknown gas be "x".
Therefore, the effusion rate for the unknown gas is proportional to
.[tex]\[\frac{1}{\sqrt{x}}\].[/tex]
The effusion rate of CO₂ is proportional to \[\frac{1}{\sqrt{44}}\].
Now,
[tex]\[\frac{\text{Effusion rate of the unknown gas}}{\text{Effusion rate of CO}_2}=\frac{0.667}{1}\][/tex]
or,
\[tex]\[\frac{1}{\sqrt{x}}=\frac{0.667}{\sqrt{44}}\][/tex]]
or,
[tex]\[\sqrt{x}=\frac{\sqrt{44}}{0.667}\][/tex]
or,
[tex]\[x=\left ( \frac{\sqrt{44}}{0.667} \right )^{2}\][/tex]
Therefore, the molar mass of the unknown gas is 120 g/mol.
For more such questions on molar mass , Visit:
https://brainly.com/question/21334167
#SPJ11
Given the following chemical symbol, answer the questions below. This atom has 70 electrons and 114 neutrons. What value should be?Y 76 X^Z
The value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70.
The number of protons in the nucleus of an atom is equal to its atomic number(Z). Therefore, to calculate the value of Z, you need to subtract the number of neutrons from the mass number (A).
The number of neutrons is calculated as follows:
Number of neutrons = mass number - atomic number
The mass number(A) is calculated as follows: Number of protons + number of neutrons = mass number.
The total number of electrons is given as 70.
So, number of electrons = number of protons.
Each atom is neutral, so the total positive charge (protons) is equal to the total negative charge (electrons).
Therefore, the number of protons is also equal to 70.
The mass number (A) is the sum of the number of protons and the number of neutrons:
mass number = number of protons + number of neutrons.
Substituting the known values into the above equation:
A = 70 + 114 = 184
Therefore, to calculate the atomic number (Z), you need to subtract the number of neutrons from the mass number:
Z = A - number of neutrons
Z = 184 - 114
Z = 70
Therefore, the value of Z for the chemical symbol Y76XZ given that the atom has 70 electrons and 114 neutrons is 70, and the mass number is 184.
Learn more about chemical symbol: https://brainly.com/question/10892900
#SPJ11
The equation for the combustion of propane is elven below
C}Hs (g) +
5
02 (g)
3
CO, (g) +
4
H20 (g)
a. Use the law of conservation of mass to balance the equation, and place the appropriate coefficients in front of each species in the equation.
b. For each molar quantity given in the table below, provide the number of moles of the other reactants or products
nocossarv for comolete reaction to ake Dace.
The coefficients that would balance the reaction equation is;
C3H8 + 5O2 → 3CO2 + 4H2O
How do you balance a reaction equation?
Here are the steps to balance a chemical equation:
Write the unbalanced chemical equation using the correct chemical formulas for the reactants and products.
Count the number of atoms of each element on both the reactant and product sides of the equation.
Start by balancing the atoms of the most complex or least common element in the equation, such as oxygen or hydrogen.
Balance the element by adding coefficients (whole numbers) in front of the formulas for the reactants or products.
Repeat this process for each element in the equation until the number of atoms of each element is equal on both sides.
Double-check your work by counting the number of atoms of each element and making sure they are balanced.
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1
if you add 25 ml of water to 15 ml of a 0.050 m hcl solution, what is the new concentration of the solution?
To find the new concentration of a 0.050 M HCl solution after adding 25 mL of water, we can use the formula:
M₁V₁ = M₂V₂
Where:
M₁ = initial molarity of the solutionV₁ = initial volume of the solutionM₂ = final molarity of the solutionV₂ = final volume of the solutionGiven,
M₁ = 0.050 MV₁ = 15 mL = 0.015 L (as volume should be in liters)M₂ = ?V₂ = 15 mL + 25 mL = 40 mL = 0.040 LNow applying the formula we get,
M₁V₁ = M₂V₂0.050 M × 0.015 L = M₂ × 0.040 LM₂ = (0.050 × 0.015) ÷ 0.040= 0.01875 MTherefore, the new concentration of the solution is 0.01875 M.
Learn more about concentration: https://brainly.com/question/2201903
#SPJ11
rank the following alkyl halides in order of their increasing rate of reaction with triethylamine: iodoethane 1-bromopropane 2-bromopropane
The order of increasing reaction rate of alkyl halides with triethylamine is iodoethane, 1-bromopropane, and 2-bromopropane.
When the primary alkyl halide reacts with the triethylamine, it's faster than the secondary alkyl halide. Since triethylamine is a strong, bulky base that tends to perform nucleophilic substitution, it undergoes a reaction with both primary and secondary alkyl halides. When halides react with triethylamine, the bond between nitrogen and carbon is formed.
In this reaction, the rate of reaction will be slower with secondary alkyl halides due to steric hindrance. Iodoethane will be more reactive than 1-bromopropane because of the higher electronegativity of iodine which makes it more prone to nucleophilic substitution. Based on the above discussion, the order of increasing rate of reaction with triethylamine is 2-bromopropane < 1-bromopropane < iodoethane.
Therefore, iodoethane is the most reactive of the three alkyl halides, 1-bromopropane is more reactive than 2-bromopropane and 2-bromopropane is the least reactive.
To know more about alkyl halides, refer here:
https://brainly.com/question/17063582#
#SPJ11
What element is located in group 4 and period 4?*
Which of the following explains how inlets are impacted by high tides?
A. High tides fill inlets with water so they become larger.
B. High tides cause the land to be more exposed.
C. High tides remove sand and seashells on the beach.
D. High tides erode the sediments from an inlet.
(pls help)
Answer:It's D
Explanation:
What mass of hydrogen will react with 84g of N2
8 H₂S+_8_Cl₂ --> _16_HCI + _1_Sg8
57 g H₂S makes how many grams of HCL
Answer:109.5g HCL
Explanation: 1st get the GFM of H2S, which is 34g/mol, and divide 57g by it. You get the moles for H2S: 1.7. Put what you have over what you want (have/want) equal to what other chemical you want like this:
8H2S/1.7H2S = 16HCl/X
Solve for it like an algebra equation
8x = 27.2 27.2/8 = 3.4molHCl
Round to sig figs
3molHCl
Multiple by HCL GFM (36.5g/mol)
3mol x 36.5g/mol
109.5gHCl
a solution of cacl2 in water forms a mixture that is 35.0% calcium chloride by mass. if the total mass of the mixture is 481.6 g, what masses of cacl2 and water were used?
The mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.
The total mass of the mixture is 481.6g, and it is found that the solution of CaCl2 in water forms a mixture that is 35.0% calcium chloride by mass. Therefore, we are supposed to find the masses of CaCl2 and water that were used.
In the given mixture, let's assume the mass of CaCl2 is ‘x’ g, and the mass of water is ‘y’ g.
Now, from the question, it is given that the total mass of the mixture is 481.6 g:
x + y = 481.6 g
1. As per the question, it is also given that the mixture is 35.0% calcium chloride by mass. This means that the ratio of the mass of CaCl2 to the total mass of the mixture is 35/100 or 0.35. So, the mass of CaCl2 present in the mixture is:
Mass of CaCl2 = 0.35 × 481.6 g = 168.56 g
Also, the mass of water in the mixture is the difference between the total mass of the mixture and the mass of CaCl2.
Thus, mass of water = total mass of the mixture - mass of CaCl2y = 481.6 g - 168.56 g = 313.04 gThus, the mass of CaCl2 and water that were used are 168.56g and 313.04g, respectively.
Learn more about mass: https://brainly.com/question/25959744
#SPJ11
Consider the following compound: 8 N 5 2. 3. 4. Determine the oxidation number atoms (a) 1. (b) 6, and (c) 7, a.) b.) c.) What is the average oxidation number for carbon in this compound? Use the algorithm method with the formula, not the structure. Enter fractions in decimal form with at least 3 spaces after the decimal. e.g. if O.N. E. then enter 2.500. Evaluate
The oxidation number of atoms (a) 1. (b) 6, and (c) 7 are as follows:The oxidation number of atom 1 is +8,The oxidation number of atom 6 is +5,The oxidation number of atom 7 is -2.The average oxidation number for carbon in this compound is -1.875.
The algorithm method with the formula is used to determine the average oxidation number for carbon in the compound. The formula to calculate the oxidation state of carbon can be given as:
Oxidation state of carbon = (number of carbon atoms x oxidation state of carbon) / total number of atoms.The given compound 8 N 5 2.3.4 consists of 19 atoms, of which 8 are carbon atoms, 5 are nitrogen atoms, and 6 are hydrogen atoms.
The oxidation state of nitrogen is -3 in the compound, and the oxidation state of hydrogen is +1.Now, the oxidation state of carbon is calculated as follows:
Oxidation state of carbon = (8 × oxidation state of carbon) / 19
We are supposed to find the average oxidation number of carbon atoms. To do this, we sum up the oxidation numbers of all carbon atoms and divide the sum by the total number of carbon atoms.
Oxidation state of carbon = (5* -1 + 3* -2 + 6 * +1) / 8
Oxidation state of carbon = (-5 - 6 + 6) / 8
Oxidation state of carbon = -1.875
Thus, the average oxidation number for carbon in this compound is -1.875.
Learn more about oxidation number here:
brainly.com/question/29263066
#SPJ11
Suppose that the prototype iron(II) solution has a molarity of 0.0250 upon mixing with the SCN- before any reaction. Since the SCN- solution has a molarity of 0.000100, all of it reacts with the much more concentrated iron(III) to make FeSCN2+. From this, the slope, m is determined. Now, for solution 1 (see previous work or the directions in the lab for the molarity), determine the molarity of iron(III) remaining if the absorbance of the FeSCN2+ complex was 0.3923 and slope, m, was previously determined to be 6700.
The question given is an application problem of the Beer-Lambert Law, which is defined as the relationship between the absorbance of a solution and the concentration of the solute in the solution.
SolutionThe prototype iron (II) solution has a molarity of 0.0250. Since it reacts with the much more concentrated iron (III) to make FeSCN2+, the SCN- the solution has a molarity of 0.000100. The Beer-Lambert Law equation is given by: Absorbance, A = εlCWhere, Absorbance, A = 0.3923 (given)Pathlength, l = 1 cm (given)Slope, m = 6700 (given)Concentration of FeSCN2+, C = ?Extinction coefficient, ε =? Now, since the FeSCN2+ is the product of the reaction between Fe2+ and SCN-; therefore, the moles of Fe2+ will be the same as the moles of FeSCN2+ formed. Using stoichiometry, the moles of Fe2+ can be calculated as: Moles of Fe2+ = Moles of FeSCN2+ formed = (0.0250 mol/L) x Volume of Fe2+Solution (L)Since the volume of Fe2+ Solution is not given, it can be assumed that it is the same as the SCN- solution, which is 0.0500 L. Therefore, Moles of Fe2+ = (0.0250 mol/L) x 0.0500 L = 0.00125 mol/Now, the concentration of the Fe2+ solution can be calculated as Molarity of Fe2+ solution = Moles of Fe2+ / Volume of Fe2+ Solution= 0.00125 mol/0.0500 L= 0.0250 mol/LSince the slope, m = εl, the extinction coefficient, ε can be calculated as:ε = m/l = 6700/1 = 6700 L/mol cmNow, the concentration of the Fe3+ can be calculated as:ε = A/lC = 6700 L/mol cm0.3923 = 1/0.0250 x C0.3923 x 0.0250 = CTherefore, Concentration of Fe3+ = 0.00981 mol/LHence, the molarity of iron (III) remaining if the absorbance of the FeSCN2+ complex was 0.3923 and slope, m, was previously determined to be 6700 is 0.00981 mol/L.
Learn more about molarity at brainly.com/question/8732513
#SPJ11
4. A sample of water with a mass of 785 g and a starting temperature of
15.0°C is heated. What would the final temperature of the water be if 250,000
joules of heat are added to the water?(Ans: 91°C)
The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.
Describe Heat Capacity?Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.
The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.
To solve this problem, we can use the specific heat capacity formula:
Q = m * c * ΔT
where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
We can rearrange this formula to solve for ΔT:
ΔT = Q / (m * c)
We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).
Substituting these values into the equation, we get:
ΔT = 250,000 J / (785 g * 4.184 J/g°C)
ΔT ≈ 75.4°C
Therefore, the final temperature of the water would be:
15.0°C + 75.4°C = 91 °C
So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.
To know more about capacity visit:
https://brainly.com/question/28921175
#SPJ1
For an atom, electrostatic potential is also called:
a) electromagnetic potential
b) electron potential c) atomic potential
d) coulomb potential.
The electrostatic potential for an atom is also called D) coulomb potential.
What is Coulomb's law?Coulomb's law is the law of electric force that states that the force of attraction or repulsion between two charges is directly proportional to their charges and inversely proportional to the square of the distance between them.
The electrostatic potential energy between two charges is also proportional to the product of the charges and inversely proportional to the distance between them squared.
Therefore, for an atom, the electrostatic potential is directly proportional to the charge of the nucleus and inversely proportional to the distance between the electrons and the nucleus.
Thus, the coulomb potential is the electrostatic potential between the positively charged nucleus and negatively charged electrons of an atom. The correct option is d) coulomb potential.
To know more about Coulomb's law:
https://brainly.com/question/506926
#SPJ11
Which of the following bonds would be the most polar without being considered ionic?a. F-Hb. Na-Fc. S-Hd. Cl-He. O-H
The most polar bond without being considered ionic would be O-H.
Ionic bonds are the bond formed by the sharing of electrons between nonmetals to create a molecule that is neutral, while a covalent bond is a bond formed by the sharing of electrons between metals and nonmetals to create a molecule that is neutral.
Polar covalent bonds happen when there is an uneven distribution of electrons between two atoms that are bonded together. This is usually because the electrons are more strongly attracted to one atom over the other.
As a result, one atom will have a partial negative charge, and the other atom will have a partial positive charge.
In the water molecule, the O-H bond is polar because oxygen is more electronegative than hydrogen. Since the difference in electronegativity between hydrogen and oxygen is more significant than between the other atoms in the other bonds, the O-H bond is the most polar.
Learn more about polar bonds here:
https://brainly.com/question/29144393
#SPJ11
Below you will see the election transmission of hydrogen atoms which of do you think represents the low frequency protons emissions.
The highest frequency of the lines that we have in the hydrogen atom will be line D
Is frequency inversely related to wavelength?Frequency is inversely related to wavelength. The wavelength and frequency of a wave are related by the equation:
c = λf
where c is the speed of light, λ (lambda) is the wavelength of the wave, and f is the frequency of the wave. This equation is known as the wave equation.
If the wavelength of a wave increases, then the frequency of the wave must decrease to maintain the same speed. Conversely, if the wavelength of a wave decreases
Learn more about wavelength:https://brainly.com/question/31143857
#SPJ1
Each tablet contains the same number of moles of CaCO 3 and MgCO 3. One tablet reacted with excess hydrochloric acid to produce 0.24 dm 3 of carbon dioxide at r.t.p.
1.Calculate how many moles of CaCO 3 there are in one tablet?
2.number of moles CO 2 = ?
can anyone please give me explained answer.
The number of moles of CaCO3 and number of moles of CO2 produced by one tablet is 0.00974 mol.
What is the number of moles of CaCO 3 there are in one tablet?Based on the given information, we can use stoichiometry to calculate the number of moles of CaCO3 in one tablet and the number of moles of CO2 produced.
To calculate the number of moles of CaCO3 in one tablet, we need to know the balanced chemical equation for the reaction between hydrochloric acid (HCl) and calcium carbonate (CaCO3):
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
From the equation, we can see that 1 mole of CaCO3 produces 1 mole of CO2.
Therefore, the number of moles of CaCO3 in one tablet is equal to the number of moles of CO2 produced by the tablet.
The given information states that one tablet reacted with excess hydrochloric acid to produce 0.24 dm3 of carbon dioxide at r.t.p. We can convert the volume of CO2 to moles using the ideal gas law:
PV = nRT
where;
P is the pressure (which is 1 atm at r.t.p.),
V is the volume (0.24 dm3),
n is the number of moles of gas,
R is the gas constant, and
T is the temperature (which is 273 K at r.t.p.).
Rearranging the equation and solving for n, we get:
n = PV/RT = (1 atm)(0.24 dm3)/(0.08206 L·atm/mol·K)(273 K)
n = 0.00974 mol
Learn more about number of moles at: https://brainly.com/question/30337257
#SPJ1
Predict the molecular shape for each of these compounds. Remember to consider all of the outer electrons before you make your choice.A. Tetrahedral- MethaneB. Trigonal Pyramidal- AmmoniaC. Trigonal Planar- Sulfur TrioxideD. Bent- Water, OzoneE. Linear- Carbon Dioxide
(a) Methane -the molecular shape is tetrahedral shape.
(b) Ammonia - the molecular shape is trigonal pyramidal.
(c) Sulfur trioxide - the molecular shape is trigonal planar shape.
(d) Water - the molecular shape is bent shape.
(e) Carbon dioxide - the molecular shape is a linear shape.
What is a molecular shape?Molecular shape refers to the three-dimensional arrangement of atoms in a molecule. It describes the relative positions of the atoms and the angles between the chemical bonds that connect them.
The shape of a molecule is determined by the arrangement of its electrons and the way in which the atoms share these electrons to form chemical bonds. The shape of a molecule can have a significant impact on its physical and chemical properties, such as its polarity, reactivity, and solubility.
Learn more about molecular shapes here: https://brainly.com/question/11985101
#SPJ1
which solution is most concentrated? (1) 0.1 mole of solute dissolved in 400 ml of solvent (2) 0.2 mole of solute dissolved in 300 ml of solvent (3) 0.3 mole of solute dissolve
The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. The most concentrated solution is one that has the highest amount of solute dissolved in a given amount of solvent is 0.3 mole of solute dissolved.
What is the concentration?Concentration is defined as the number of solute particles in a given volume of solution. It can be expressed in a variety of ways, including mass percent, mole fraction, molarity, and molality.
The solution with 0.3 mole of solute dissolved is the most concentrated. 0.1 mole of solute dissolved in 400 ml of solvent
0.2 mole of solute dissolved in 300 ml of solvent
0.3 mole of solute dissolved in 500 ml of solvent.
The concentration of a solution is defined as the amount of solute that has been dissolved in a given amount of solvent. Let's calculate the concentration of each solution using the formula of concentration:
Molarity = Number of moles of solute/Volume of solution (L)
For (1), Number of moles of solute = 0.1 mole. Volume of solution = 400 ml = 0.4 L. Concentration,
C = Number of moles of solute/Volume of solution (L)
C = 0.1/0.4 = 0.25 mol/L
For (2), Number of moles of solute = 0.2 mole. Volume of solution = 300 ml = 0.3 L.
Concentration,
C = Number of moles of solute/Volume of solution (L)
C = 0.2/0.3 = 0.67 mol/L.
For (3), Number of moles of solute = 0.3 mole.
Read more about mole here:
https://brainly.com/question/15356425
#SPJ11
in lactic acid fermentation what happens to the pyruvate coming from glycolysis?
In the process of lactic acid fermentation, the enzyme lactate dehydrogenase catalyses the conversion of pyruvate to lactate or lactic acid by the addition of hydrogen ions.
The pyruvate that results from glycolysis is transformed into lactic acid during lactic acid fermentation. The synthesis of lactate and NAD+ as a result of the transfer of two highly energetic electrons from NADH to pyruvate is what allows for this conversion. This procedure aids in the renewal of NAD+, which is necessary for glycolysis to carry on making ATP without oxygen. In many organisms, including bacteria, fungi, and animals, lactic acid fermentation is an important process. It is crucial in muscles during vigorous exercise when oxygen supply is constrained.
learn more about lactic acid here:
https://brainly.com/question/10948414
#SPJ4