The speed of the large cart after the collision would be 0.087 m/s
Momentum problemWe can use the law of conservation of momentum to solve this problem, which states that the total momentum of a closed system remains constant before and after a collision.
The momentum before the collision is given by:
p1 = m1v1 + m2v2
where m1 = 0.2 kg is the mass of the small cart, v1 = 1.70 m/s is its velocity before the collision, m2 = 2.00 kg is the mass of the large cart, and v2 = 0 m/s is its velocity before the collision.
p1 = (0.2 kg)(1.70 m/s) + (2.00 kg)(0 m/s) = 0.34 kg m/s
The momentum after the collision is also given by:
p2 = m1v1' + m2v2'
where v1' = -0.830 m/s is the velocity of the small cart after the collision (since it recoils in the opposite direction), and we want to find v2', the velocity of the large cart after the collision.
p2 = (0.2 kg)(-0.830 m/s) + (2.00 kg)(v2')
Since momentum is conserved, we have:
p1 = p2
0.34 kg m/s = (0.2 kg)(-0.830 m/s) + (2.00 kg)(v2')
Solving for v2', we get:
v2' = (0.34 kg m/s - 0.166 kg m/s) / 2.00 kg
v2' = 0.087 m/s
Therefore, the speed of the large cart after the collision is 0.087 m/s, to three significant figures.
More on momentum can be found here: https://brainly.com/question/30487676
#SPJ1
while completing the experiment, where should you measure to on the pendulum bob?
While completing the pedulum experiment, you should measure the length of the pendulum to the middle of the pendulum bob to caculate the required values.
What part of a pendulum do you measure?A ruler, meter stick, or measuring tape are necessary in order to determine the length of a pendulum. Start the measurement at the point where the string pivots from its attachment at the string's upper end. As you reach the item dangling from the string, the pendulum bob, measure all the way down to its center.
The smallest time intervals are measured using a pendulum clock. A little stone or metallic ball suspended from a stiff stand by a thread is the basic component of a pendulum. Bob is the name of the metallic ball.
Learn more about pedulum at:
https://brainly.com/question/30823177
#SPJ1
A swimmer is capable of swimming 1. 8 m/s in still water. If she swims directly across a 200 m wide river whose current is 0. 80 m/s, how far downstream will she land?
As per the given question, the swimmer will land 88.88m far downstream
Total distance covered = 1.8m/s
Length = 200m
The current of the river = 0.80 m/s
It is referred to downstream if a boar or swimmer moves in the same direction as the stream. When a boat's or a swimmer's speed is mentioned, it typically refers to the speed in still water.
Calculating the time taken to cross the river -
= Total length covered / total distance covered
= 200/ 1.8
= 111.1
Calculating the total drift of the swimmer -
= Total current of the river x time taken
= 0.80 x 111.1
= 88.88
Read more about downstream on:
https://brainly.com/question/22253892
#SPJ4
1. about a trillion comets are thought to be located far, far beyond pluto in the______.
2. the bright spherical part of a comet observed when it is close to the sun is the ______.
3. a comet's ____ stretches directly away from the sun.
4. a comet's____ is the frozen portion of a comet.
5. particles ejected from a comet can cause a(n) ______ on earth.
6. the ______ extends from about beyond the orbit of neptune to about twice the distance of neptune from the sun.
1. About a trillion comets are thought to be located far, far beyond Pluto in the Oort Cloud.
2. The bright spherical part of a comet observed when it is close to the sun is the coma.
3. A comet's tail stretches directly away from the sun.
4. A comet's nucleus is the frozen portion of a comet.
5. Particles ejected from a comet can cause a meteor shower on earth.
6. The Kuiper Belt extends from about beyond the orbit of Neptune to about twice the distance of Neptune from the sun.
A comet is a small, icy, dusty celestial body. When a comet is close to the sun, it may emit gas and dust into space, producing a visible coma and a tail. The nucleus is the frozen portion of a comet, whereas the coma is the bright spherical part of a comet observed when it is close to the sun. The tail of a comet extends directly away from the sun.
The Oort Cloud is the location of about a trillion comets, far beyond Pluto. The Kuiper Belt, on the other hand, extends from beyond the orbit of Neptune to about twice the distance of Neptune from the sun. Finally, particles ejected from a comet can cause a meteor shower on earth.
Learn more about Comet:
https://brainly.com/question/12443607
#SPJ11
spherical capacitor contains a charge of 3.20nCwhen connected to a potential difference of250V. If its plates are separated by vacuum and theinner radius of the outer shell is 4.60cm.
A) Calculate the capacitance.
B) Calculate the radius of the inner sphere.
C) Calculate the electric field just outside the surface of theinner sphere.
A) The capacitance of the spherical capacitor is 1.45 pF (picofarads), B) The radius of the inner sphere is 3.60 cm. and C) The electric field just outside the surface of the inner sphere is [tex]2.36 * 10^6 V/m[/tex] (volts per meter).
To calculate the capacitance, we can use the formula C = Q/V, where Q is the charge and V is the potential difference. Plugging in the values, we get [tex]C = (3.20 * 10^{-9} C)/(250 V) = 1.28 * 10^{-11} F[/tex].
However, since the capacitor is a spherical one, we need to use the formula for the capacitance of a spherical capacitor, which is [tex]C = (4\pi \epsilon_0)(r_1 r_2)/(r_2-r₁)[/tex], where r₁ and r₂ are the radii of the two shells and ε0 is the permittivity of free space.
Rearranging the formula and plugging in the values, we get [tex]r_1 = (C/4\pi \epsilon_0)(r_2-r_1)/r_2,[/tex] which gives us r₁ = 3.60 cm.
To calculate the electric field just outside the surface of the inner sphere, we can use the formula
E = [tex]\frac{Q}{4\pi\epsilon_0 r^2}[/tex], where r is the radius of the inner sphere.
Plugging in the values, we get [tex]E = (3.20 * 10^{-9} C)/(4\pi\epsilon_0(0.0460 m)^2) = 2.36 * 10^6 V/m.[/tex]
This electric field arises due to the charge on the inner sphere and induces an opposite charge on the outer shell of the capacitor.
To know more about spherical capacitor, refer here:
https://brainly.com/question/15550772#
#SPJ11
A car drives at a steady speed around a perfectly circular track. Which of the following are false.(You will receive partial credit for each correct choice and lose partial credit for each incorrect choiceso choose carefully)The net force on the car is zeroBoth the acceleration and the net force point outwardBoth the acceleration and net force on the ground point inward.If there is no friction, the acceleration is outwardThe net force on the car is inversely proportional to the radius of the trackThe cars acceleration is zero.
The false statements about the force and acceleration of the car are statements 1, 2, 3, 4, and 6.
1. The net force on the car is zero: False.
The net force on the car is not zero since it is constantly accelerating due to the centripetal force. This force points inward towards the center of the circular track and is provided by the friction between the tires and the track.
2. Both the acceleration and the net force point outward: False.
The acceleration is inward and the net force is inward. This is due to the centripetal force which is pointing inward toward the center of the track.
3. Both the acceleration and the net force on the ground point inward: False.
The acceleration is pointing inward due to the centripetal force, while the net force is pointing outward due to the static friction between the ground and the tires.
4. If there is no friction, the acceleration is outward: False.
The acceleration is always inward due to the centripetal force, even if there is no friction.
5. The net force acting on the car is inversely proportional to the radius of the track: True.
As the radius of the track increases, the net force acting on the car decreases.
6. The car's acceleration is zero: False.
The car's acceleration is not zero, it is constantly accelerating due to the centripetal force.
In conclusion, all of the statements are false except for the fifth statement.
To know more about acceleration, refer here:
https://brainly.com/question/30499732#
#SPJ11
Which of the following statements are true? Choose all that apply.- The magnetic force is always perpendicular to both the magnetic field and the velocity of the charge .- Magnetic fields cause charges to speed up.- Magnetic fields are created by moving charges.- Magnetic fields don't do any work on charges.- The magnetic field is always perpendicular to the velocity of the charge.- Magnetic fields deflect moving charges.
The following statements are true:
The magnetic force is always perpendicular to both the magnetic field and the velocity of the charge.Magnetic fields don't do any work on charges.Magnetic fields deflect moving charges.Magnetic fields are created by moving charges, and the magnetic field is always perpendicular to the velocity of the charge.
The magnetic force is always perpendicular to both the magnetic field and the velocity of the charge. The magnetic force is always perpendicular to both the magnetic field and the velocity of the charge. Magnetic force is the force on a charged particle that is due to the magnetic field. The magnetic force is always perpendicular to both the magnetic field and the velocity of the charge. This implies that it can change the direction of motion of the particle, but not the speed of the particle.
Magnetic fields don't do any work on charges because they always act perpendicular to the motion of the charge. Since work is defined as force times the distance over which it acts and the magnetic field is always perpendicular to the direction of motion, the angle between force and displacement is 90°, and the work done is zero. Magnetic fields deflect moving charges. Magnetic fields deflect moving charges because magnetic fields exert a force on a moving charge. The direction of the magnetic field is perpendicular to the direction of motion of the charge, causing it to experience a deflecting force.
You can learn more about the magnetic force at: https://brainly.co.id/tugas/50355801
#SPJ11
Find the work done by the force field F in moving an object from P to Q. F(x, y) = x5i + y5j; P(1, 0), Q(3, 3)
The required work done by the force field F in moving an object from P to Q is calculated to be 303.5 units.
Work is a type of energy and it is a scalar product of force and displacement vectors.
The force vector is given as,
F(x,y) = x⁵ i + y⁵ j
Points P is given as (1,0) and Q is given as (3,3)
The work done by the given force along the line joining the two points can be found by integrating the force vector along the direction of the line. Let us find the equation of the line segment joining the given points,
(x - 1)/(1-3) = (y - 0)/(0-3)
(x - 1)/-2 = y/-3
(x - 1)/2 = y/3
3x - 3 = 2y
Let us integrate the force vector along the given line,
1 ≤ x ≤ 3
2y = 3x - 3
2 dy = 3 dx
So, Work W = ∫(x⁵ i + y⁵ j)(dxi + dyj)
⇒ ∫(x⁵ dx + y⁵ dy)
⇒ ∫(x⁵ dx + (3x-3/2)⁵ 3dx/2)
⇒ 3/2 ∫[x⁵ + (3x-3/2)⁵] dx
⇒ 3/2 [x⁶/6 + (3x-3)⁶/(2⁵ ×6×3)] (limits from 1 to 3)
⇒ 3/2 [3⁶/6 + (3×3-3)⁶/(2⁵ ×6×3)] - 3/2 [1⁶/6 + (3-3)⁶/(2⁵ ×6×3)] = 607/2 = 303.5 units
Thus, the work done is calculated to be 303.5 units.
To know more about work:
https://brainly.com/question/22472751
#SPJ4
Learning Goal: To practice Problem-Solving Strategy 29.1 forcharge interaction problems.
A proton and an alpha particle are momentarily at rest at adistance r from each other. They then begin to move apart.Find the speed of the proton by the time the distance between theproton and the alpha particle doubles. Both particles arepositively charged. The charge and the mass of the proton are,respectively, e and m. The e charge and the mass of the alphaparticle are, respectively, 2e and 4m.
Find the speed of the proton (vf)p by the time the distancebetween the particles doubles.
Express your answer in terms of some or all of the quantities,e, m, r, and ?0.
Which of the following quantities are unknown?
A initial separation of the particles
B final separation of the particles
C initial speed of the proton
D initial speed of the alpha particle
E final speed of the proton
F final speed of the alpha particle
G mass of the proton
H mass of the alpha particle
I charge of the proton
J charge of the alpha particle
Physics
we can use the principle of conservation of energy. Initially, both particles are at rest, so the initial kinetic energy is zero, and the total energy is just the initial potential energy given by the Coulomb interaction between the particles. At a later time when the distance between the particles has doubled, the potential energy has decreased by a factor of 4, and this decrease in potential energy has been converted into kinetic energy of the particles. Since the total energy is conserved, we can equate the final kinetic energy to the initial potential energy and solve for the final speed of the proton.
Let's start by calculating the initial potential energy of the system. The Coulomb force between two point charges q1 and q2 separated by a distance r is given by:
F = (1/4πε0) * (q1 * q2) / r^2
where ε0 is the permittivity of free space. The potential energy U of the system is the negative of the work done by the Coulomb force as the particles move from infinity to a separation r:
U = - ∫∞r F dr = (1/4πε0) * (q1 * q2) / r
In this problem, the proton has charge e and the alpha particle has charge 2e, so the initial potential energy is:
U_i = (1/4πε0) * (e * 2e) / r = e^2 / (2πε0r)
When the distance between the particles doubles, the new separation is 2r, and the final potential energy is:
U_f = (1/4πε0) * (e * 2e) / (2r) = e^2 / (4πε0r)
The change in potential energy is therefore:
ΔU = U_i - U_f = e^2 / (4πε0r)
This energy has been converted into kinetic energy of the particles. Let's assume that the alpha particle remains at rest throughout the process (since it is much more massive than the proton). Then the final kinetic energy of the proton is:
K_f = ΔU = e^2 / (4πε0r)
We can equate this to the initial kinetic energy (which is zero) to find the final speed of the proton:
(1/2) * m * (vf)p^2 = e^2 / (4πε0r)
Solving for (vf)p, we get:
(vf)p = sqrt(2 * e^2 / (4πε0m r))
Substituting the given values for e, 2e, and m, we get:
(vf)p = sqrt(2 * (1.6 x 10^-19 C)^2 / (4π(8.85 x 10^-12 F/m) (1.67 x 10^-27 kg) r))
Simplifying, we get:
(vf)p = 2.19 x 10^6 m/s * sqrt(1/r)
Therefore, the answer is (A) 0.422.
If a circuit had 4 D-Cell batteries (each 1.5 V) and a lightbulb with resistance of 2 ohms, what is the current that flows through the circuit?
2 A
3 A
6 A
8 A
The current that flows through the circuit with 4 D-cell batteries and a lightbulb with a resistance of 2 ohms is 3A. Therefore, the correct option is option 2.
The current that flows through a circuit is calculated using Ohm's law. Ohm's law relates voltage, resistance, and current in a circuit. The law states that the current passing through a conductor between two points is proportional to the voltage across the two points and inversely proportional to the resistance between them.
It is typically written as
I=V/R,
where I is the current, V is the voltage, and R is the resistance of the circuit.
Now, let's use Ohm's law to calculate the current that flows through the given circuit.
I = V/R where V = 4 x 1.5 = 6 V and R = 2 Ω
Substituting these values into the formula, we get;
I = 6/2I = 3 A
Therefore, the current that flows through the circuit with 4 D-cell batteries and a lightbulb with a resistance of 2 ohms is 3 A. Hence, option 2 is correct.
Learn more about Ohm's law:
https://brainly.com/question/19892453
#SPJ11
The electric potential at a distance d
from a certain point charge is V relative to infinity. What is the potential (relative to infinity) at half the distance for the same charge?
A. V/4
B. 2 V
C. V/2
D. 4 V
The electric potential from a certain point charge when the distance is halve for the same charge will be V/2. Thus, the correct option will be C.
According to the Coulomb's law, the electric field is the gradient of the electric potential. And, the electric potential V is given by:V = kQ/r, where Q is the charge, r is the distance between the charge and the point where the potential is being calculated, and k is Coulomb's constant. Here, the electric potential at a distance d from a certain point charge is V relative to infinity.
The electric potential (relative to infinity) at half the distance for the same charge is the distance r/2, so:
V' = kQ/r
2V' = kQ/(d/2)
V' = 2kQ/d
V' = V/2
Therefore, the electric potential at half the distance for the same charge is V/2.
Learn more about Electric potential here:
https://brainly.com/question/12645463
#SPJ11
A kangaroo is capable of jumping to a height of 2.62m. Determine the takeoff speed of the kangaroo.
Answer: 7.17
Explanation:
Maximum height reached by Kangaroo H=2.62
Final velocity at the maximum height v=0
Acceleration due to gravity g=−9.8 m/s2
Using v2−u2=2gH∴ 0−u2=2(−9.8)(2.62)
⟹ u=2(9.8)(2.62)=7.17 m/s
PLS HELPPPP ILL GIVE YOU 30 POINTS
Spinning is ________. A. Biking in the mountains or hills B. Biking on rough terrain C. Cycling on a stationary bike D. Cycling on a road bike
Answer:
C
Explanation:
Ever heard of a 'spin' class at your local gym? ===> spinning on a stationary bike with others doing the same
Answer: D
Explanation:
Describes depolarizing vs nondepolarizing neuromuscular blockers
Acetylcholine and non-depolarizing blockers battle it out for receptors in order to function. They assist with surgery and mechanical ventilation. Depolarizing substances.
On the other hand, result in prolonged activation and consequent desensitisation of the receptors.
Non-depolarizing neuromuscular blockers (nNMBs) are given as adjuvant therapy in the management of critically sick patients as well as as primary therapy to facilitate endotracheal intubations. nNMBs (rocuronium, vecuronium, pancuronium, atracurium, cisatracurium, mivacurium) are primarily used during routine and emergency intubations to facilitate airway management and lower the risk of laryngeal injury. This activity describes the indications, mode of action, administration techniques, significant adverse effects, contraindications, monitoring, and toxicity of nNMBs so that healthcare professionals can guide patient therapy towards the best results possible during anaesthesia and other medical procedures where nNMBs are beneficial therapeutically.
Learn more about Depolarizing here:
https://brainly.com/question/25533751
#SPJ4
how is the sunspot cycle directly relevant to us here on earth? view available hint(s)for part a how is the sunspot cycle directly relevant to us here on earth? o coronal mass ejections and other activity associated with the sunspot cycle can disrupt radio communications and knock out sensitive electronic equipment.
o the sunspot cycle is the cause of recent global warming.
o the sun's magnetic field, which plays a major role in the sunspot cycle, affects compass needles that we use on earth. o the brightening and darkening of the sun that occurs during the sunspot cycle affects plant photosynthesis here on earth. o the sunspot cycle strongly influences earth's weather.
The sunspot cycle is directly relevant to us here on earth because coronal mass ejections and other activity associated with the sunspot cycle can disrupt radio communications and knock out sensitive electronic equipment.
What is the sunspot cycle?The sunspot cycle is directly relevant to us here on earth because it can cause coronal mass ejections and other activity that can disrupt radio communications and knock out sensitive electronic equipment. It also plays a major role in global warming, affects compass needles, affects plant photosynthesis, and strongly influences the earth's weather.
This means that the sunspot cycle can have a significant impact on our technology and communication systems, which are critical to our daily lives. Coronal mass ejections can cause major geomagnetic storms that have the potential to knock out power grids, damage satellites, and disrupt GPS signals. These storms can also create beautiful auroras that are visible in many parts of the world, but they can also have serious consequences for our infrastructure.
The sun's magnetic field, which plays a major role in the sunspot cycle, affects the compass needles that we use on earth. This means that the sunspot cycle can also have an impact on navigation systems, which are important for transportation and other industries.
Overall, the sunspot cycle strongly influences Earth's weather and can affect plant photosynthesis here on earth. This means that changes in the sunspot cycle can have a significant impact on our planet and our daily lives.
To learn more about the sunspot cycle follow
https://brainly.com/question/30615197
#SPJ11
aball is thrown horizontally from the top of a building 120 m high. the ball strikes the ground at a point 75 m horizontally away from and below the point of release. what is the resultant speed of the ball just before it strikes the ground?
The resultant speed of the ball just before it strikes the ground can be calculated by using the equation of motion. The equation of motion for an object in free fall is: s = u + at
Where:
s is the distance travelled. u is the initial velocity.a is the acceleration (due to gravity). t is the time.In this case, the initial velocity (u) is 0 (since it is thrown horizontally). The acceleration (a) is 9.81 m/s2, and the distance travelled (s) is 195 m (the distance from the top of the building to the point of impact).
Plugging the values into the equation: 195 = 0 + 9.81t. Solving for t, we get t = 19.84 s.
The resultant speed (v) can be calculated by using the equation v = u + at. Since u is 0, the equation simplifies to v = 9.81t. Plugging in the value of t that we found earlier, we get v = 195.87 m/s, which is the resultant speed of the ball just before it strikes the ground.
Learn more about speed: https://brainly.com/question/6504879
#SPJ11
A telephone pole casts a clear shadow in the light from a distant head lamp of a car, but no such effect is noticed for the sound from the car horn. why?
Answer:
A telephone pole casts a clear shadow in the light from a distant head lamp of a car, but no such effect is noticed for the sound from the car horn. Why? Answer: The sound and light both are waves. But the wavelength of sound waves is very large as compared to the wavelength of light waves.
Explanation:
if it helped you please mark me a brainliest :)))
if you are looking at a photo with a grayscale filter, what can you likely conclude about the light waves emitted from the filtered photo relative to the original color photo?
A grayscale filter will reduce the intensity of, and in some cases completely remove, all the colors in an image. This means that the visible light waves emitted from the photo with a grayscale filter are less intense than the light waves emitted from a photo without the filter.
What is grayscale filter?A grayscale image is one in which each pixel's value is a single sample carrying just information about the intensity of the light. Shades of grey make up only grayscale images, a type of black-and-white or grey monochrome. Black at the lowest intensity contrasts with white at the highest.
An picture with a defined grayscale color-space that maps the sample values to the achromatic channel of a standard color-space, which is based on the observed characteristics of human vision, is said to be colorimetric (or, more precisely, photometric).
There is no specific mapping from such a color image to a grayscale image if the original color image has no defined color-space or if the grayscale image is not meant to have the same human-perceived achromatic intensity as the color image.
Define pixel.The smallest addressable element in a raster image, or the smallest point in an all points addressable display device, is called a pixel or picture element. The smallest component in most digital display systems that can be changed by software are pixels.
Each pixel serves as a sample of the original image; as more samples are used, the original is often more faithfully reproduced. Every pixel has a different level of intensity. The three or four component intensities of a color, such as red, green, and blue, or cyan, magenta, yellow, and black, are often used in color imaging systems to depict a color.
To know more about Pixels, visit:
https://brainly.com/question/15189307
#SPJ1
the inventor of the photographic process in which a photograph produced without a negative by exposing objects to light on light sensitive paper, is named
The inventor of the photographic process in which a photograph produced without a negative by exposing objects to light on light-sensitive paper is named William Henry Fox Talbot.
What is photography?Photography is the art, process, and practice of creating photographs, which are images recorded by light or other electromagnetic radiation, either electronically or chemically, onto an image sensor or other light-sensitive material.
Photography has made its way from the ancient Chinese invention of the camera obscura in the fifth century BCE to the worldwide photographic society of the present. The first photographic image was taken by French inventor Joseph Nicéphore Niépce in 1826, but the earliest surviving photograph was taken by French photographer Louis Daguerre in 1837.
William Henry Fox Talbot, an English scientist, produced the first photographic negative, which enabled him to make multiple prints, in 1835. Fox Talbot also developed the calotype method, which replaced the daguerreotype and allowed for images to be developed on paper that was first coated with silver iodide and then developed in gallic acid.
Learn more about photography: https://brainly.com/question/13600227
#SPJ11
Rank the objects from left to right based on their average distance from the Sun, from farthest to closest. (Not to scale.)Pluto, Saturn, Jupiter, Mars, Earth, Mercury
From farthest to closest, the ranking of the planets based on their average distance from the Sun would be:
Pluto, Saturn, Jupiter, Mars, Earth, Mercury
Note that the objects are not to scale, so this ranking may not be perfectly accurate in terms of relative distances. However, it gives a general idea of the order of the planets from farthest to closest to the Sun.
The eight planets in our solar system, listed in order from the Sun, are:
Mercury
Venus
Earth
Mars
Jupiter
Saturn
Uranus
Neptune
These eight planets are also known as the "classical planets," and are the largest and most massive objects in orbit around the Sun. There are also several dwarf planets in our solar system, such as Pluto and Ceres, as well as numerous smaller objects like asteroids and comets.
Learn more about planets:
https://brainly.com/question/11023671
#SPJ11
The period of a satellite, the time it takes for a complete revolution, depends on the satellite's a. radial distance. b. mass. c. weight. d. all of these e. none of these
The period of a satellite, the time it takes for a complete revolution, depends on the satellite's radial distance. Hence, the correct option is a.
What is a satellite?A satellite is an object in space that revolves around a planet, a moon, or even another satellite. Satellites, particularly those in the field of technology, enable the gathering of information and communication of information between two locations on Earth. Satellites can also be used for weather forecasting and military surveillance.
A revolution is one complete orbit around a central body for a satellite. The amount of time it takes for a satellite to complete one revolution is known as the satellite's period. As a result, it is clear that the period of a satellite depends on its radial distance. The closer a satellite is to the planet, the shorter its period would be, while the farther away it is, the longer its period would be.
To know more about satellite:
https://brainly.com/question/13266803
#SPJ11
A 71. 0 kg
football player is gliding across very smooth ice at 2. 05 m/s. He throws a 0. 440 kg
football straight forward
Using conservation of momentum the player's speed afterward if the ball is thrown at 17.5 ms relative to the player is 3.02 m/s.
We can use the principle of conservation of momentum to solve this problem, which states that the total momentum of a closed system remains constant if no external forces act on it.
Initially, the momentum of the system is the sum of the momentum of the football player and the football, given by:
p_initial = m_player × v_player + m_football × v_football
where:
m_player = 71 kg is the mass of the football player
v_player = 2 m/s is the initial velocity of the football player
m_football = 0.430 kg is the mass of the football
v_football = 17.5 m/s is the velocity of the football relative to the football player
Plugging in the values, we get:
p_initial = (71 kg)(2 m/s) + (0.430 kg)(17.5 m/s) = 15.325 kg m/s
After the football is thrown, the football player will move in the opposite direction with a new velocity v_player'. The momentum of the system after the throw is:
p_final = m_player × v_player' + m_football × v_football'
where v_football' = 0 m/s since the football has left the system.
Since the total momentum of the system is conserved, we have:
p_initial = p_final
which gives us:
m_player × v_player + m_football × v_football = m_player × v_player'
Solving for v_player', we get:
v_player' = (m_player × v_player + m_football × v_football) / m_player
Plugging in the values, we get:
v_player' = (71 kg × 2 m/s + 0.430 kg × 17.5 m/s) / 71 kg = 3.02 m/s
Therefore, the football player's speed after throwing the football is 3.02 m/s.
Learn more about the momentum at
https://brainly.com/question/30677308
#SPJ4
The question is -
A 71 kg football player is gliding across very smooth ice at 2 ms. He throws a 0.430 kg football straight forward. What is the player's speed afterward if the ball is thrown at 17.5 ms relative to the player?
Two 4.4 kg bodies, A and B, collide. The velocities before the collision are A = (28i + 27j) m/s and B = (9.8i + 1.8j) m/s. After the collision, 'A = (3.7i + 3.2j) m/s. What are (a) the x-component and (b) the y-component of the final velocity of B? (c) What is the change in the total kinetic energy (including sign)?
Answer:jfnvufhdfiprhfpiurgh8rhvjm vjfnb
Explanation:
(3)
Four particles are located at points (1,4), (2,3), (3,3), (4,1).?
Find the moments Mx and My and the center of mass of the system, assuming that the particles have equal mass m.
Mx=
My=
xCM=
yCM=
Find the center of mass of the system, assuming the particles have mass 3, 2, 5, and 7, respectively.
xCM=
yCM=
Given that four particles are located at points (1,4), (2,3), (3,3), (4,1).
The moments Mx and My and the center of mass of the system can be determined as follows:
For equal mass m, the moment Mx is obtained by summing the product of the mass of each particle and the perpendicular distance from the line y=0.
Similarly, the moment My is obtained by summing the product of the mass of each particle and the perpendicular distance from the line x=0.
My = Σ mi*yiMy = (m(1)+m(2)+m(3)+m(4))(4+3+3+1)/4My = 11m
Hence, the moments Mx and My are 10m and 11m, respectively.
For particles with mass 3, 2, 5, and 7 respectively, the x-coordinate and y-coordinate of the center of mass of the system are given by:
xCM = (Σ mixi)/Mx= (3*1+2*2+5*3+7*4)/17= (3+4+15+28)/17= 50/17yCM = (Σ miyi)/My= (3*4+2*3+5*3+7*1)/17= (12+6+15+7)/17= 40/17
Hence, the center of mass of the system is at (50/17, 40/17).
The center of mass of the system with the following coordinates will be (2.76, 2.76). This can be calculated by the sum of the moments of each particle around the x-axis.
What is the center of mass of the system?Here, we are given four particles that are located at points (1,4), (2,3), (3,3), (4,1). To calculate the moments Mx and My and the center of mass of the system, let us assume that the particles have equal mass m.
Moment Mx is defined as the sum of the moments of each particle around the y-axis. The moment of the ith particle around the y-axis is given by Mx,i = yim, where yi is the y-coordinate of the ith particle. Therefore, the total moment Mx of the system is: Mx = Mx,1 + Mx,2 + Mx,3 + Mx,4 = 4m + 3m + 3m + 1m = 11m
Therefore, Mx = 11m.
Moment My is defined as the sum of the moments of each particle around the x-axis. The moment of the ith particle around the x-axis is given by My, i = xim, where xi is the x-coordinate of the ith particle. Therefore, the total moment My of the system is: My = My,1 + My,2 + My,3 + My,4 = 1m + 2m + 3m + 4m = 10m
Therefore, My = 10m.
The coordinates of the center of mass (xCM, yCM) are given by:
xCM = Σmixi / ΣmiyCM = Σmiyi / Σmi
where, Σmi is the sum of the masses and Σmixi and Σmiyi are the sums of the moments around the y-axis and x-axis, respectively.
If the particles have equal mass m, then Σmi = 4m + 3m + 3m + 1m = 11m.
xCM = (1×4 + 2×3 + 3×3 + 4×1) / 11 = 2.45
yCM = (1×4 + 2×3 + 3×3 + 4×1) / 11 = 2.45
Therefore, the center of mass of the system is (2.45, 2.45).
If the particles have mass 3, 2, 5, and 7, respectively, then Σmi = 3 + 2 + 5 + 7 = 17.
xCM = (1×3 + 2×2 + 3×5 + 4×7) / 17 = 2.76
yCM = (4×3 + 3×2 + 3×5 + 1×7) / 17 = 2.76
Therefore, the center of mass of the system is (2.76, 2.76).
Learn more about Center of mass here:
https://brainly.com/question/28996108
#SPJ11
The tires of a car make 95 revolutions as the car reduces its speed uniformly 95 km/h to 55 km/h. The tires have a diameter of 0.80 m. (a) what was the angular acceleration of the tires? If the car continues to decelerate at this rate, (b) how much more time is required for it to stop, and (c) how far does it go?
(a) Angular acceleration of the tyres= 7.3 rad/s^2
(b) Time required to stop= 8.9 s
(c) Distance travelled= 492.5 m
The angular acceleration of the tires can be calculated by using the following equation:
Angular acceleration = (Change in angular velocity)/(time).
Using the given information, we can calculate the angular acceleration as follows:
Angular velocity = (95 revolutions)/(95 km/h)
Time = (95 km/h - 55 km/h)/(95 km/h)
Angular acceleration = (95 revolutions)/(Time x 0.80 m)
Angular acceleration = 7.3 rad/s^2
For part b, the amount of time required for the car to stop can be calculated as follows:
Time = (55 km/h)/(7.3 rad/s^2 x 0.80 m)
Time = 8.9 s
For part c, the distance the car travels can be calculated as follows:
Distance = (55 km/h x 8.9 s)
Distance = 492.5 m
"angular acceleration", https://brainly.com/question/31145298
#SPJ11
Una tabla de madera mide 61. 6cm como se expresa en metros esa longitud
The length of the board of wood expressed in meters is 0.616 m.
To convert 61.6 cm to meters, we can use the formula:
Length in meters = Length in centimeters ÷ 100
Plugging in the given value, we get:
Length in meters = 61.6 cm ÷ 100 = 0.616 m
Wood is a natural composite material made of cellulose fibers, lignin, and hemicelluloses, which are held together by a complex network of bonds. The cellulose fibers provide strength and rigidity, while the lignin acts as a binder, holding the fibers together. The hemicelluloses are responsible for the elasticity and flexibility of the material.
Wood has many interesting physical properties that make it a valuable material in a wide range of applications. For example, it is a good insulator, making it useful for construction and electrical applications. It is also a good acoustic absorber, making it useful in musical instruments and recording studios.
To learn more about Wood visit here:
brainly.com/question/10967023
#SPJ4
Complete Question:
A board of wood measures 61.6 cm as that length is expressed in meters
Given that the vapor pressure of n-butane at 350K is 9.4573bar; find the molar volume of a) saturated-vapor b) saturated liquid by: 1) VdW equation
The molar volume of saturated vapor of n-butane at 350K is approximately 0.154 L/mol. The molar volume of saturated liquid of n-butane at 350K is approximately 0.000548 L/mol.
What is vapor pressure?Vapor pressure is defined as the pressure exerted by the vapor when the liquid and vapor are in equilibrium at a given temperature.
We must first determine the values of the constants a and b in order to solve for the molar volume of n-butane using the Van der Waals equation. The Van der Waals equation is presented as follows:
(P + a(n/V)²)(V - nb) = nRT
where:
P = vapor pressure
n = number of moles
V = molar volume
R = gas constant
T = temperature
The constants a and b are given by:
a = (27/64)(R²)(Tc²)/Pc
b = (RTc)/(8Pc)
where:
Tc = critical temperature
Pc = critical pressure
For n-butane, Tc = 425.2 K and Pc = 38.0 bar.
a = (27/64)(R²)(Tc²)/Pc = (27/64)(8.3145²)(425.2²)/(38.0) = 8.3456 bar*(L/mol)²
b = (RTc)/(8Pc) = (8.3145425.2)/(838.0) = 0.1462 L/mol
a. We must solve the Van der Waals equation for V at a pressure equal to the vapor pressure at 350 K, or 9.4573 bar, in order to determine the molar volume of saturated vapor.
(P + a(n/V)²)(V - nb) = nRT
(9.4573 + 8.3456(n/V)^2)(V - 0.1462n) = n(8.3145)(350)
To find V, we can solve using an iterative approach. We can enter a starting value for V into the equation above and, using the revised value of n/V, determine a new value for V. Until the computed value of V converges to a constant number, we continue this operation.
By employing this technique, we determine that the molar volume of saturated n-butane vapor at 350K is roughly 0.154 L/mol.
b. When the pressure is equal to the saturation pressure at 350 K, we need to solve the Van der Waals equation for V in order to determine the molar volume of saturated liquid, which may be done by using Antoine's equation:
log10(P) = A - (B / (T + C))
where:
P = pressure (in bar)
T = temperature (in K)
A, B, and C are constants
For n-butane, the constants for Antoine's equation are:
A = 4.00959
B = 1435.264
C = -48.37
Substituting these values and T = 350 K into Antoine's equation, we get:
log10(P) = 4.00959 - (1435.264 / (350 - 48.37)) = 3.0278
[tex]P = 10^{(3.0278)[/tex] = 20.318 bar
Now, we can use the Van der Waals equation with P = 20.318 bar to solve for the molar volume of saturated liquid.
(20.318 + 8.3456(n/V)²)(V - 0.1462n) = n(8.3145)(350)
Using the same iterative method as before, we find that the molar volume of saturated liquid of n-butane at 350K is approximately 0.000548 L/mol.
Learn more about molar volume on:
https://brainly.com/question/11676583
#SPJ1
During a baseball game, the sound of the bat hitting the ball can be heard in most parts of the stadium. That sound is weaker at greater distances. What is the cause of this phenomenon?(1 point)
The sound waves are spread out over a large area.
The sound waves are blocked by people in the stadium.
The sound waves can only travel through certain materials.
The sound waves slow down as they move away from the bat.
The cause of this phenomenon is that the sound waves spread out over a large area as they move away from the source (the bat hitting the ball). Therefore, the sound waves become weaker at greater distances from the source.
What is Sound Wave?
A sound wave is a type of pressure wave that propagates through a medium such as air, water, or solids. It is created by the vibration of an object, which causes the molecules in the surrounding medium to vibrate and transfer energy from one molecule to the next. This vibration produces alternating areas of high and low pressure, which travel through the medium as a wave. Sound waves are characterized by their frequency, wavelength, amplitude, and speed, and can be measured and analyzed using various scientific instruments and techniques. Sound waves are important in many areas of science, technology, and everyday life, including music, communication, medicine, and environmental monitoring.
When a bat hits a baseball, it creates a disturbance in the air that moves outwards in all directions, creating sound waves. These sound waves carry energy, which is transferred from the bat to the air molecules. As the sound waves move away from the source, they spread out over a larger area. This means that the same amount of energy is distributed over a larger area, resulting in a decrease in the sound wave's intensity or amplitude.
Learn more about Sound Wave from given link
https://brainly.com/question/1173066
#SPJ1
A resistor of 4Ω is connected to a series combination of two batteries, 8 V and 4 V. Calculate:
a) The current I.
b) The potential difference Uba
c) The potential difference Uba', when switch S is open.
Answer:
Explanation:
o calculate the current I, we can use Ohm's Law which states that I = V/R, where V is the total voltage across the resistor and R is the resistance of the resistor.
a) The total voltage across the resistor can be found by adding the voltage of the two batteries in series, which gives a total voltage of 8V + 4V = 12V.
So, I = V/R = 12V/4Ω = 3A.
b) The potential difference Uba is simply the voltage difference between the two batteries in the series combination, which is 8V - 4V = 4V.
c) When switch S is open, the circuit is broken and the potential difference Uba' becomes equal to the voltage of the 8V battery. So, Uba' = 8V.
For a simple harmonic oscillator, which of the following pairs of vector quantities always point in the same direction throughout the motion? (Note: the position vector defines the object's displacement from equilibrium.)a. restoring force and accelerationb. position and accelerationc. position and velocityd. velocity and acceleration
The correct answer is D: velocity and acceleration. In a simple harmonic oscillator, the restoring force and position vector point in opposite directions, whereas the velocity and acceleration vectors point in the same direction throughout the motion.
For a simple harmonic oscillator, the position vector describes the object's displacement from equilibrium. The restoring force vector always points back toward equilibrium. The velocity vector describes the speed and direction of the object, and the acceleration vector describes the rate of change of the velocity vector. Both the velocity vector and acceleration vector always point in the same direction throughout the motion.
The equations governing the motion of a simple harmonic oscillator involve the position vector, the restoring force vector, the velocity vector, and the acceleration vector. The position vector is determined by the restoring force vector, while the acceleration vector is determined by the position vector. This means that the restoring force vector and the acceleration vector are not always pointing in the same direction.
In summary, for a simple harmonic oscillator, the correct pair of vector quantities that always point in the same direction throughout the motion is the velocity and acceleration vectors.
for such more questions on simple harmonic oscillator
https://brainly.com/question/26114128
#SPJ11
the wires are fused together end-to-end to form a single wire. a potential difference is applied to the ends of the wire by a battery so that current flows along the wire. what is the ratio of the electron drift velocity between the two metals, reported as
The ratio of the electron drift velocity between the two metals is [tex]$\frac{v_{d1}}{v_{d2}}=\frac{1}{6}$[/tex].
Current is the flow of charge. The direction of flow of the positive charge is in the opposite direction to the flow of electrons. Electrons flow from negative to positive terminals. Electrons moving at the same speed constitute an electrical current.
The relation between electric current, drift velocity, and charge is given by the formula I = neAvd. Where:
I is the current flowing in the wire, A is the cross-sectional area of the wire, n is the electron density, e is the charge on an electron, and vd is the electron drift velocity.Since the current in the wire is the same everywhere, the cross-sectional area of the wire is also the same everywhere, and we can write: n1e1v1 = n2e2v2Since the wire is made up of two metals, v1 and v2 refer to the drift velocities of the electrons in each metal. Since the two metals are fused end-to-end, they have the same length, L, and the same potential difference, V. Hence, the electric field in each metal is the same, and we can write:E = V/L = j/ne1e. Where j is the current density, which is the current per unit cross-sectional area of the wire.
Hence, the ratio of the electron drift velocity between the two metals is given by: [tex]$\frac{v_{d1}}{v_{d2}}=\frac{1}{6}$[/tex] = [tex]$\frac{6}{1}$[/tex].
Learn more about ratio of the kinetic energy: brainly.com/question/15062289
#SPJ11