Given, Number of turns, n = 22Area of each turn, A = 50 cm²
Magnetic field, B = 2 T (initial)Magnetic field, B' = 7 T (final)Time, t = 2.0 s
We need to find the emf induced in the coil. Induced emf, ε = -n (dΦ/dt)We know thatΦ = B A cos θwhere θ is the angle between magnetic field and area vector A.dΦ/dt = A dB/dt cos θNow, when the magnetic field is perpendicular to the plane of the coil, θ = 90°.Hence, cos 90° = 0
Therefore, dΦ/dt = 0Now,[tex]ε = -n (dΦ/dt) = -n×0 =ε = -n (dΦ/dt) = -n×0 = [/tex]xHence, the induced emf in the coil is 0 V.
for such more questions on Magnetic field
https://brainly.com/question/26257705
#SPJ11
a very long straight wire carries current 32 a. in the middle of the wire a right-angle bend is made. the bend forms an arc of a circle of radius 14 cm, as show. determine the magnetic field at the center of the arc.
The magnetic field at the center of the arc due to the current carrying wire is [tex]1.14 \times 10^{-7} T[/tex].
To determine the magnetic field at the center of the arc, we can use the Biot-Savart Law, which relates the magnetic field at a point to the current element and its distance from the point.
[tex]B = \mu _0I/(2\pi r)[/tex]
where μ₀ is the magnetic constant, I is the current flowing through the wire, and r is the distance of the point of interest from the wire.
Since the arc has a radius of 14 cm, we need to find the magnetic field at a distance of 14 cm from the wire due to one-fourth of the circumference of the circle.
The current through the wire is 32 A.
Thus, the magnetic field at the center of the arc is given by:
[tex]B = \mu _0I/(8\pi d)[/tex]
Putting the given values, we get:
[tex]B = (4\pi \times 10^{-7} Tm/A) \times (32 A)/(8\pi \times 14 \ cm)= 1.14 \times 10^{-7} T[/tex]
Learn more about the magnetic field:
https://brainly.com/question/7802337
#SPJ11
A piece of metal weighing 187.6 g is placed in a graduated cylinder containing 225.2 mL of water. The combined volume of solid and liquid is 250.3 mL. What is the density, in grams per milliliter, of the metal?
The density of the metal is 7.47 g/mL which can be calculated by dividing the mass (187.6 g) of the metal by its volume (250.3 mL).
The volume of the metal by using the displacement method.
When the metal is placed in the graduated cylinder containing water, the water level rises by a certain amount equal to the volume of the metal. Therefore, we can calculate the volume of the metal as follows:
Volume of metal = Volume of solid and liquid - Volume of liquid
Volume of metal = 250.3 mL - 225.2 mL
Volume of metal = 25.1 mL
Now that we have the volume of the metal, we can find its density as follows:
Density of metal = Mass of metal / Volume of metal
Density of metal = 187.6 g / 25.1 mL
Density of metal = 7.47 g/mL
Therefore, the density of the metal is 7.47 g/mL.
To practice more questions about density:
https://brainly.com/question/28734050
#SPJ11
Calculate the current passing through the circuit when:
a)Switch K1 is closed
b)Switches K1 and K2 are both closed .
c)Switch K1 is open and K2 is closed.
The current passing through the circuit when:
a) Switch K1 is closed is 0.25 A.
b) Switches K1 and K2 are both closed is 1.0667 A.
c)Switch K1 is open and K2 is closed is 0.4 A.
What is Kirchhoff's laws?Kirchhoff's laws are two fundamental principles in electrical circuit analysis that describe the behavior of electric currents and voltages in a closed circuit. These laws are:
Kirchhoff's Current Law (KCL) states that the sum of currents that enter and leave any node in a circuit must equivalent the sum of currents leaving that node.
Kirchhoff's Current Law (KCL) provides that the total of currents entering and leaving any node in a circuit must equal the sum of currents leaving that node. Mathematically, this can be expressed as:
Σi_in = Σi_out
where Σi_in is the sum of the currents entering the node and Σi_out is the sum of the currents leaving the node.
Kirchhoff's Voltage Law (KVL): The sum of the voltages around any closed loop in a circuit must equal zero.
We can use Ohm's and Kirchhoff's laws to solve this problem.
When switch K1 is closed and switch K2 is open:
The total resistance of the circuit is 3 + 5 = 8 ohms. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 8 ohms = 0.25 A
When switches K1 and K2 are both closed:
The total resistance of the circuit is now (3 x 5) / (3 + 5) = 15 / 8 ohms, which is equivalent to 1.875 ohms. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 1.875 ohms = 1.0667 A
When switch K1 is open and switch K2 is closed:
In this case, the circuit consists only of the 5 ohm resistor, and the voltage across it is still 2 V. As an outcome, the current flowing through the circuit is:
I = V / R = 2 V / 5 ohms = 0.4 A
Note that the current passing through the circuit depends on the resistance of the circuit and the voltage of the battery. When switches are added or removed, the resistance and/or the voltage may change, which will affect the current passing through the circuit.
To know more about Voltage, visit:
https://brainly.com/question/29445057
#SPJ1
A solid ball of radius r_b has a uniform charge density rho. A) What is the magnitude of the electric field at a distance r>r_b from the center of the ball? Express your answer in terms ofrho,r_b,r,andepsilon_0.
E(r)=
The magnitude of the electric field at a distance r > r_b from the center of the ball is given by: E(r) = (1/3) * ρ * r_b³ / (ε₀ * r²).
Magnitude refers to the quantitative measurement of a physical quantity such as length, mass, time, temperature, or energy. Magnitude is expressed in units of measurement, which allows for standardized comparison and communication of measurements between different observers.
Magnitude can also refer to the strength or intensity of a physical phenomenon, such as the magnitude of an earthquake or the magnitude of a magnetic field. In this context, magnitude is typically measured on a logarithmic scale, where an increase of one unit represents a tenfold increase in strength. Magnitude is a fundamental concept in physics that plays a crucial role in quantifying and understanding physical phenomena.
To learn more about Magnitude visit here:
brainly.com/question/29766788
#SPJ4
basic behavior: according to your data, does this resistance increase or decrease with voltage? a reasonable (and correct) thought is that the impact is really with temperature, as the light bulb heats up with more power going into it. how does your data imply resistance varies with temperature?
Based on the given question, the resistance will: increase with the increase in voltage.
The reason behind this is that resistance and voltage have a direct relationship. As the voltage increases, the resistance also increases. This can be explained by Ohm’s Law which states that V= IR where V is voltage, I is current and R is resistance. As per the second part of the question, it is implied that the resistance varies with temperature.
The resistance of any material depends upon temperature, and a rise in temperature increases the resistance of the material. The light bulb acts as a resistor, and its resistance will increase as the temperature increases due to an increase in the temperature of the filament of the bulb.
The resistance is directly proportional to the temperature of the bulb, and it is represented by the equation
R = R₀ (1 + αt),
where R is resistance, R₀ is the resistance at a particular temperature, α is the temperature coefficient of resistance, and t is the temperature difference in Celsius.
Therefore, based on the data provided, it can be concluded that resistance increases with the increase in temperature which results in the heating of the light bulb, which is a resistor.
To know more about resistance refer here:
https://brainly.com/question/29427458#
#SPJ11
By what factor would you have to increase a at constant n to have the zero point energies of a Ne atom be equal to the zero point energy of a hydrogen atom in the box?
The zero point energies of a Ne atom be equal to the zero point energy of a hydrogen atom in the box, you would have to increase a at constant n by a factor of 4π²/3.
The zero-point energy is the smallest amount of energy that a quantum mechanical physical system can have. It is the energy that a system has when it is at its lowest possible energy state.
In order to have the zero point energies of a Ne atom equal to the zero point energy of a hydrogen atom in the box, this is because the zero point energy of a Ne atom is equal to 4π² times the zero point energy of a hydrogen atom, which is given by the equation E0 = h²/(8ma2).
Therefore, the factor by which a has to be increased at constant n to have the zero point energies of a Ne atom be equal to the zero point energy of a hydrogen atom in the box is by a factor of 4π²/3.
Learn more about zero point energies here:
https://brainly.com/question/30402910
#SPJ11
Measurements are described as
they are very similar to each other. What word
completes the sentence?
Answer:
Precise
Explanation:
Or Precise Measurements
Measurements are described as precise they are very similar to each other.
What is meant by measurement ?Measurement is defined as the process of comparison of a physical quantity to a reference quantity.
Here,
We can determine a material's characteristic by measuring a physical quantity. We are able to measure weight, mass, and other physical attributes including velocity, momentum, energy, and other dimensions of space and time.
In order to compare a physical quantity to a unit, we need measurement.
A unit of measurement is a specific magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind. It is determined by convention or regulation. Any additional amount of that type can be stated as a multiple of the measurement.
Hence,
Measurements are described as precise they are very similar to each other.
To learn more about measurement, click:
https://brainly.com/question/12629581
#SPJ2
the surface of the sun appears sharp in visible light because
"The surface of the sun appears sharp in visible light because the photosphere is thin compared to the other layers in the sun."
Most of the electromagnetic energy that reaches the earth begins in the photosphere, the area of the sun that is visible to us. The photosphere is referred to as the sun's surface, despite the fact that it is a gaseous entity.
The gas in the photosphere appears to have a sharp surface, but in reality, it is heavier lower in the Sun and less dense higher up. It is more transparent the less thick it is. The area of the gas that is visible to us is where it has largely become translucent. About 300 km of this layer are deep.
The photosphere is the line separating the core of the Sun from its atmosphere. It is the part of the Sun's surface that is visible to us. The photosphere is not like a planet's surface; even if you could stand in the sun, you couldn't do so on the photosphere.
To know more about Sun:
https://brainly.com/question/12498469
#SPJ4
A block of mass m = 2.0 kg is dropped from height h = 40 cm onto a spring of spring constant k = 1960 N/m. Find the maximum distance the spring is compressed.
The maximum distance the spring of spring constant k = 1960 N/m is compressed when a block of mass m = 2.0 kg is dropped from height h = 40 cm onto a spring is 6.32 cm.
To find the maximum distance the spring is compressed, we use the conservation of energy principle.Conservation of Energy Principle;The principle of conservation of energy states that energy cannot be created or destroyed; it can only be transformed from one form to another. So, the total energy before the block is dropped is equal to the total energy after the block is dropped.The total energy before the block is dropped is given by:
PE1 + KE1 where PE1 is the potential energy and KE1 is the kinetic energy.The total energy after the block is dropped is given by:PE2 + KE2 + Uwhere PE2 is the potential energy, KE2 is the kinetic energy, and U is the potential energy stored in the spring. The maximum distance the spring is compressed is the distance when the block comes to rest, so KE2 = 0.From the principle of conservation of energy, we have:
PE1 + KE1 = PE2 + U.Since the block is dropped from rest, KE1 = 0, and PE1 is given by: mgh where g is the acceleration due to gravity.Substituting the given values, we have: PE1 = mgh = 2.0 kg × 9.8 m/s² × 0.4 m = 7.84 J.At the maximum compression, the potential energy stored in the spring is equal to the potential energy lost by the block, so:U = PE1 - PE2.
Substituting the values, we have:U = 7.84 J - 0 = 7.84 J.Since the potential energy stored in a spring is given by:U = 1/2 k x²where x is the compression distance of the spring.Substituting the values, we have:7.84 J = 1/2 × 1960 N/m × x²x² = 7.84 J / (1/2 × 1960 N/m)x² = 0.004 m²x = √(0.004 m²) = 0.0632 m = 6.32 cm.Therefore, the maximum distance the spring is compressed is 6.32 cm.
More on springs: https://brainly.com/question/30364838
#SPJ11
what is the magnitude of the electrostatic force and between a charge of 3:0 105 coulomb and a charge of 6:0 106 coulomb separated by 0.30 mete
The electrostatic force between a charge of 3.0 × 10⁵ coulomb and a charge of 6.0 × 10⁶ coulomb separated by 0.30 meters has a magnitude of 0.013 N (newton).
What is the magnitude of electrostatic force?The electrostatic force is given by Coulomb’s law, which states that the magnitude of the electrostatic force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them, Coulomb’s Law states that the magnitude of the electrostatic force between two point charges is given by:
F = (kq₁q₂)/r²
where, F is the magnitude of the electrostatic force q₁ and q₂ are the two point charges separated by a distance r k is Coulomb’s constant k = 9 × 10⁹ N·m²/C², and.
The distance is measured in meters. So, putting the values into the formula:
F = (9 × 10⁹ N·m²/C²) (3.0 × 10⁵ C) (6.0 × 10⁶ C) / (0.30 m)²
F = (9 × 10⁹ × 3.0 × 10⁵ × 6.0 × 10⁶) / (0.30)²
F = (9 × 9) × (3 × 2) × 10³ × 10³ / (3 × 10)² N = (81 × 10⁶) / (9) N = 9 × 10⁶ / (1) N = 9 × 10⁶ N = 9,000,000 N or 9.0 × 10⁶ N.
Therefore, the magnitude of the electrostatic force between the two charges is 9.0 x 10⁶ N.
Read more about force here:
https://brainly.com/question/12785175
#SPJ11
A wave interaction that occurs when two waves are in the same place at the same time
The wave interaction that occurs when two waves are in the same place at the same time is called interference.
Interference can be either constructive or destructive, depending on the relative phases of the waves.
What is constructive interference?
Constructive interference occurs when two waves have the same phase and their amplitudes add together. The resulting wave has a larger amplitude than either of the individual waves. This can be seen, for example, when two speakers playing the same sound are placed close together.
What is destructive interference?
Destructive interference occurs when two waves have opposite phases and their amplitudes subtract from each other. The resulting wave has a smaller amplitude than either of the individual waves. This can be seen, for example, when two waves with equal amplitude and wavelength are superimposed, but one is shifted by half a wavelength relative to the other.
To know more about interference, visit:
https://brainly.com/question/16098226
#SPJ1
Complete question is: The wave interaction that occurs when two waves are in the same place at the same time is called interference.
(Astronomy)
Colin tells his friend to orbit around the perimeter of the yard spraying bug spray every few feet. How does Colin want his
friend to move?
in a loose figure 8
in a zig-zag pattern
in a very straight line
within a curved or elliptical path
ANSWER: D (Within a curved or elliptical path.)
In order for his friend to orbit around the perimeter of the yard spraying bug spray every few feet, Colin wants his friend to move within a curved or elliptical path.
What is Bug spray?Bug spray is described as a substance applied to the skin, clothing, or other surfaces to discourage insects from landing or climbing on that surface.
The main component of bug sprays is a pressurized, concentrated dose of their active substance. The substance that hides the smell of carbon dioxide and repels insects is the active component in bug spray.
In order to orbit around the perimeter of the yard spraying bug spray every few feet, Collins's friend must move within a curved or elliptical path.
Learn more about Bug sprays at: brainly.com/question/22364917
#SPJ1
what is the size in mm of an image of a 0.85 mm object, such as lettering inside a ring, held at this distance?
The size of an image of a 0.85 mm object held at a certain distance is 5.67 mm.
To solve for di, we need to know the value of do and the magnification. Since the problem does not provide the value of do, we cannot calculate di directly. However, we can use the thin lens formula, 1/do + 1/di = 1/f, where f is the focal length of the lens used to form the image. If we assume a value for f, we can solve for di.
Let's assume that the object is held at a distance of 50 mm from a converging lens with a focal length of 20 mm. Using the thin lens formula, we can solve for the image distance:
1/do + 1/di = 1/f
1/50 + 1/di = 1/20
1/di = 1/20 - 1/50
1/di = 3/1000
di = 333.33 mm
The magnification can be calculated using the equation M = -di/do. Assuming the lens is placed such that it forms a real image, the object distance is negative, and the magnification will be negative as well.
M = -di/do
M = -333.33/-50
M = 6.67
Therefore, the image of the 0.85 mm object will be magnified 6.67 times, and its size will be:
image size = object size x magnification
image size = 0.85 mm x 6.67
image size = 5.67 mm.
For more similar questions on optics
brainly.com/question/24090481
#SPJ11
The Atwood’s machine shown consists of two blocks of mass m1 and m2 that are connected by a light string that passes over a pulley of negligible friction and negligible mass. The block of mass m1 is a distance h1 above the ground, and the block of mass m2 is a distance h2 above the ground. m2 is larger than m1. The two-block system is released from rest. Which of the following claims correctly describes the outcome after the blocks are released from rest but before the block of m2 reaches the ground?
When the two-block Atwood's machine system is released from rest, the block of mass m1 accelerates downwards due to the force of gravity and the block of mass m2 accelerates upwards. This is because the mass of m2 is greater than the mass of m1, meaning m2 is the heavier object and thus the object that accelerates upwards. This is a result of Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. As the block of m2 accelerates upwards, the block of m1 accelerates downwards, allowing the two blocks to move in opposite directions.
In addition, the acceleration of the two blocks is determined by the difference in masses, with the larger mass (m2) having the smaller acceleration. This is due to Newton's Second Law of Motion, which states that the acceleration of an object is equal to the force acting on it divided by its mass. As m2 has the larger mass, it has a smaller acceleration.
Before the block of m2 reaches the ground, the acceleration of both blocks will be constant. This is because there is no friction between the two blocks, meaning the force acting on them will remain constant. The two blocks will continue to move in opposite directions, and the heavier mass will continue to accelerate at a slower rate than the lighter mass.
In conclusion, when the Atwood's machine is released from rest but before the block of mass m2 reaches the ground, the two blocks will move in opposite directions with constant acceleration. The larger mass will have the smaller acceleration due to Newton's Second Law of Motion.
For more such questions on Newton's Third Law of Motion
https://brainly.com/question/1657470
#SPJ11
Your text indicates that economic systems take natural capital and produce the following outputs. Which of these is considered to be a positive output?Depletion of nonrenewable resourcesHeatPollution and wasteDegradation of renewable resourcesGoods and services
Goods and services are generally considered to be the positive output of economic systems, as they can help to increase the overall standard of living. Natural capital is the inputs used to create these outputs, such as resources, land, or labor. When natural capital is depleted or renewable resources are degraded, this is generally not seen as a positive output. Pollution and waste are also not seen as positive outputs, as they have a detrimental effect on the environment.
Overall, economic systems use natural capital as an input to create goods and services as the positive output. This output helps to improve the standard of living and is a much more desirable outcome than the negative outputs such as depletion of nonrenewable resources, pollution, and waste.
for such more questions on Goods and services
https://brainly.com/question/10904902
#SPJ11
consider a single crystal of some hypothetical metal that has the fcc crystal structure and is oriented such that a tensile stress is applied along a direction. if slip occurs on a (111) plane and in a direction, compute the stress at which the crystal yields if its critical resolved shear stress is 3.42 mpa.
Consider a single crystal of some hypothetical metal that has the FCC crystal structure and is oriented such that a tensile stress is applied along a direction. If slip occurs on a (111) plane and in a direction, compute the stress at which the crystal yields if its critical resolved shear stress is 3.42 MPa.
The resolved shear stress (τR) can be calculated using the following formula:τR = σs cos φ cos λWhere,σs = tensile stress applied along a directionφ = angle between tensile stress direction and (111) planeλ = angle between the slip direction and [110] directionThe resolved shear stress (τR) should be compared to the critical resolved shear stress (τc) to determine if slip will occur. If τR > τc, slip will occur. If τR < τc, the crystal will remain undeformed.In this case, the slip direction is also along [110] and therefore φ = λ.
The critical resolved shear stress (τc) = 3.42 MPa. Hence, for slip to occur,τR > τc ⇒ σs cos φ cos λ > τc cos φ cos λ = 3.42 MPaSince φ = λ, we can simplify the above equation toσs > τc / cos φ⇒ σs > 3.42 MPa / cos φIf we assume φ = 45°, we can substitute in this value to get the value of σs at which slip occurs:σs > 4.83 MPa. Therefore, the stress at which the crystal yields is 3.42 MPa.
Learn more about shear stress at:
https://brainly.com/question/30530774
#SPJ11
https://imagebank.illuminateed.com/imagebank/1663644
In which state, or states, of matter can particles expand to completely fill their container?
A
II
B
I
C
III
D
I, II, and III
D. I, II, and III. The three states of matter (solid, liquid, and gas) can expand to completely fill their container
What is Matter?
Matter refers to anything that has mass and takes up space. It is the physical substance that makes up the universe and everything within it. Matter can exist in various forms, such as solid, liquid, gas, or plasma. These different forms of matter are characterized by the arrangement of particles that make up the substance and how those particles behave.
It is the basic building block of the universe and everything around us is made up of matter.
Solids have a fixed shape and volume, but they can expand slightly with changes in temperature. Gases, on the other hand, have neither a fixed shape nor a fixed volume and can expand to completely fill their container.
Learn more about Matter from given link
https://brainly.com/question/1172629
#SPJ1
the two wires are made of the same material. what are the current and the electron drift speed in the 2.0 mm diameter segment of the wire
The current flowing in the 2.00 mm diameter segment of the wire is 2.56L × 10⁻² A and the electron drift speed in the 2.00 mm diameter segment of the wire is 0.028 m/s.
Electric Current: The movement of electrons constitutes an electric current. It is measured in amperes (A).
Electron Drift Speed: When an electric field is applied to a metal wire, the electrons within the wire move in response to the field.
The average speed of electrons in the metal wire is known as electron drift speed. It is given by = I / (nAq),
Where, n is the number of electrons per unit volume of the conductor,
A is the cross-sectional area of the conductor, and
q is the charge on an electron.
Given data shows that both wires are made of the same material so the material properties (number density of electrons, atomic properties) are constant for both wires.
Hence, the electron drift speed in both wires would be the same. Let’s say the current flowing in both wires is I1 and I2 respectively and the diameter of the wire is 2.00mm or radius R = 1.00mm.
According to Ohm’s Law = the resistance of the wire can be expressed as R = ρL / A
where ρ is the resistivity of the wire,
L is the length of the wire, and
A is the cross-sectional area of the wire.
The cross-sectional area of the wire can be written as = πR²
Now combining both equations of resistance and the cross-sectional area we get,
R = ρL / πR²Now, I = V / R
So, I = V πR² / ρL
The current density can be written as J = I / A = V πR² / ρL πR²
Now we can express V as J ρL = I
Substitute the given values,
Current density J = 3.00 × 10⁶ A/m²ρ = 2.70 × 10⁻⁸ Ωm
Diameter of wire = 2.00mm
Therefore, the radius of wire = R = 1.00 mm = 1.00 × 10⁻³ m
Using the given formula, I = J πR²ρLSo, I = 3.00 × 10⁶ × π × (1.00 × 10⁻³)² × 2.70 × 10⁻⁸ × L = 2.56 L × 10⁻² A
The electron drift speed can be written as, v = I / (nAq)
Let’s say the number of electrons per unit volume of the conductor is n, the electron charge be q and
the length of the wire be L.
Then, L × πR² × nq = where m is the mass of the conductor.
L × πR² × nq = ρV
Where ρ is the density of the conductor and
V is the volume of the conductor.
So, V = πR²Lρ And, L × πR² × nq = ρπR²L
Therefore, nq = ρ
The electron drift velocity is given as,v = I / (nAq)So, v = I / (n × πR² × q)
The number density of electrons n can be expressed as = N / V
Where N is the total number of electrons in the conductor.
Substituting the given values,
Number density n = 8.49 × 10²⁸ / (π(1.00 × 10⁻³)² × L × 2.70 × 10⁻⁸)
Current I = 2.56L × 10⁻² A
Electron charge q = 1.6 × 10⁻¹⁹ C
Cross-sectional area A = πR²
Where radius R = 1.00mm or R = 1.00 × 10⁻³ m.
Now substituting the above values
we get, v = 2.56L × 10⁻² / (8.49 × 10²⁸ / (π(1.00 × 10⁻³)² × L × 2.70 × 10⁻⁸) × π(1.00 × 10⁻³)² × 1.6 × 10⁻¹⁹)
Hence the electron drift speed can be calculated as v = 0.028 m/s.
To learn more about electron drift speed:https://brainly.com/question/14293455
#SPJ11
40. To catch a ball, a baseball player extends her hand forward before Impact with the ball and then lets it ride backward in the direction of the ball's motion. Doing this reduces the force of impact on the player's hand principally because the a relative velocity is less b. force of impact is reduced c. time of impact is decreased d. time of impact is increased 41. Which of the following has the largest momentum relative to Earth's surface? a. A tightrope walker crossing Niagara Falls b. A dog running down the street C. A pickup truck speeding along a highway d. An 18-wheeler truck parked in a parking lot
40. The baseball player extends her hand forward before the impact with the ball and then lets it ride backward in the direction of the ball's motion. Doing this reduces the force of impact on the player's hand principally because the force of impact is reduced.
The force of impact is reduced when a baseball player extends her hand forward before impact with the ball and then lets it ride backward in the direction of the ball's motion. The statement is true as the force of impact is reduced due to the ball's reduced speed after hitting the hand of the baseball player. So, option B is correct.
41. An 18-wheeler truck parked in a parking lot has the largest momentum relative to Earth's surface.
Momentum can be defined as the product of mass and velocity. The momentum of a body relative to the earth's surface is given by, P = m x v. We know that momentum depends on two factors: mass and velocity. So, we can compare the momentum of each object by comparing its mass and velocity.
A parked 18-wheeler truck has the largest mass relative to the earth's surface. As the truck is not moving, the velocity is zero, so its momentum is also zero. Hence, option D is correct.
To know more about force, refer here:
https://brainly.com/question/13191643#
SPJ11#
When Trina can afford bundles A and B but not C, she purchases bundle A. When Trina can afford bundles A and C, but not B, she purchases bundle C. We can conclude her preference ordering of the three bundles is (in order from most preferred to least) A, C, B. C, A, B. OA, B, C. B, A, C.
Answer: THE AWNSER IS C,A,B
Explanation:
YW
Three bulbs
A circuit is made of two 1.7 volt batteries and three light bulbs as shown in the figure. When the switch is closed and the bulbs are glowing, bulb 1 has a resistance of 6 ohms, bulb 2 has a resistance of 45 ohms, bulb 3 has a resistance of 26 ohms, and the copper connecting wires have negligible resistance. You can also neglect the internal resistance of the batteries.
(a) With the switch open, indicate the approximate surface charge on the circuit diagram.(Do this on paper. Your instructor may ask you to turn in this work.) Refer to your diagram to decide which of the following statements about the circuit (with the switch open) are true:
There is no excess charge on the surface of the wire at location C.
The electric field in the air between locations B and C is zero.
There is a large gradient of surface charge between locations M and L.
The electric field in the filament of bulb 3 is zero.
The surface charge on the wire at location B is positive.
(b) With the switch open, find these potential differences:
VB - VC =
V
VD - VK =
V
(c) After the switch is closed and the steady state is established, the currents through bulbs 1, 2, and 3 are I1, I2, and I3 respectively. Which of the following equations are correct loop or node equations for this steady state circuit?
I2 = I3
+3.4V + -I1*(6 ) + -I2*(45 ) = 0
-I2*(45 ) + I3*(26 ) = 0
-I1*(6 )-I2*(45 ) + I3*(26 ) = 0
I1 = I2 + I3
+3.4V + -I1*(6 ) + I3*(6 ) = 0
(d) In the steady state (switch closed), which of these are correct?
VC - VF = +I2*(45 )
VC - VF = +I3*(26 )
VL - VA = -3.4V + I1*(6 )
VC - VF = +I1*(6 )
VC - VF = 0
(f) Now find the unknown currents, to the nearest milliampere. (I.e. enter your answer to three decimal places.)
I1 =
A
I2 =
A
I3 =
A
(g) How many electrons leave the battery at location N every second?
electrons/s
(i) What is the numerical value of the power delivered by the batteries?
P =
W
(j) The tungsten filament in the 45 ohm bulb is 12 mm long and has a cross-sectional area of 2 ✕ 10-10 m2. What is the magnitude of the electric field inside this metal filament?
|vector E| =
V/m
A. There is no excess charge on the surface of the wire at location C. - True
What is location?Location is a term used to describe the physical area or space a person, object, or event occupies. It is also used to describe a point on a map or other spatial coordinate system. It is often used to describe the geographic area of a business, city, or town.
The electric field in the air between locations B and C is zero. - True
There is a large gradient of surface charge between locations M and L. - False
The electric field in the filament of bulb 3 is zero. - True
The surface charge on the wire at location B is positive. - False
(b) With the switch open, find these potential differences: VB - VC = 0V
VD - VK = 0V
(c) I2 = I3 - False
+3.4V + -I1*(6 ) + -I2*(45 ) = 0 - True
-I2*(45 ) + I3*(26 ) = 0 - True
-I1*(6 )-I2*(45 ) + I3*(26 ) = 0 - True
I1 = I2 + I3 - True
+3.4V + -I1*(6 ) + I3*(6 ) = 0 - False
(d) VC - VF = +I2*(45 ) - True
VC - VF = +I3*(26 ) - True
VL - VA = -3.4V + I1*(6 ) - True
VC - VF = +I1*(6 ) - True
VC - VF = 0 - False
(f) I1 = 0.941A
I2 = 0.021A
I3 = 0.920A
(g) electrons/s = 2.852 x 10^18
(i) P = 3.4W
(j) |vector E| = 2.908 x 10^7 V/m
To learn more about location
https://brainly.com/question/29289798
#SPJ1
(a) There is no excess charge on the surface of the wire at location C. - True.
What is location?Location is a term used to describe the physical area or space a person, object, or event occupies. It is also used to describe a point on a map or other spatial coordinate system. It is often used to describe the geographic area of a business, city, or town.
The electric field in the air between locations B and C is zero. - True
There is a large gradient of surface charge between locations M and L. - False.
The electric field in the filament of bulb 3 is zero. - True
The surface charge on the wire at location B is positive. - False
(b) With the switch open, find these potential differences: VB - VC = 0V
VD - VK = 0V
(c) I₂ = I₃ - False
+3.4V + -I₁ * (6 ) + -I₂ * (45 ) = 0 - True
-I₂ * (45 ) + I₃ * (26 ) = 0 - True
-I₁ * (6 ) -I₂ * (45 ) + I₃ * (26 ) = 0 - True
I1 = I2 + I3 - True
+3.4V + -I₁ * (6 ) + I₃ * (6 ) = 0 - False
(d) VC - VF = +I₂ * (45 ) - True
VC - VF = +I₃ * (26 ) - True
VL - VA = -3.4V + I₁*(6 ) - True
VC - VF = +I₁*(6 ) - True
VC - VF = 0 - False
(f) I₁= 0.941A
I₂ = 0.021A
I₃ = 0.920A
(g) electrons/s = 2.852 x 10¹⁸
(i) P = 3.4W
(j) |vector E| = 2.908 x 10⁷ V/m
To learn more about potential differences, visit:
https://brainly.com/question/12198573
#SPJ1
The polarization of a partially polarized beam of light is defined as
p=(Imax-Imin)/(Imax+Imin)
where Imax and Imin are the maximum and minimum intensities that are
obtained when the light passes through a polarizer that is slowly rotated. Such light
can be considered as the sum of two unequal plane-polarized beams of intensities
Imax and Imin perpendicular to each other. Show that the light transmitted by a
polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has
intensity
I(f)=(1+pcos2f)Imax/(1+p).
The light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity: I(f) = (1 + pcos2f)Imax / (1 + p). Light is transmitted due to polarization.
What is the light transmitted through polarizer?
The light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity I(f) given by:
I(f) = (1 + pcos2f)Imax / (1 + p)
This equation can be derived by considering the light as a sum of two unequal plane-polarized beams of intensities Imax and Imin perpendicular to each other.
Let θ be the angle between the direction of polarization of the light and the direction in which Imax is obtained.
The intensity of light that is transmitted by a polarizer whose axis makes an angle f to the direction in which Imax is obtained can be expressed as:
I(f) = (Imax cos2(θ + f)) + (Imin cos2(θ - f))
Using the equation for polarization of the light
p = (Imax - Imin) / (Imax + Imin)
we can rewrite the expression for I(f) as follows:
I(f) = Imax [(1 + pcos2f) / (1 + p)]
Hence, the light transmitted by a polarizer, whose axis makes an angle f to the direction in which Imax is obtained, has intensity: I(f) = (1 + pcos2f)Imax / (1 + p).
Learn more about Light transmission here:
https://brainly.com/question/3080788
#SPJ11
for our ohm's law plot, what goes on each axis to get a slope equal to exactly the equivalent resistance? note: the lab manual instructs us to make a plot of inverse resistance (1/r), is that the best plotting method?
Y-axis = _____
X-axis = _____
For the ohm's law plot, the equivalent resistance can be obtained by plotting the current versus the voltage.
However, to get a slope that is equal to the equivalent resistance, we can make a plot of inverse resistance (1/r).
Y-axis = 1/R (Inverse Resistance)X-axis = Current (I)According to the lab manual, we can use the plot of inverse resistance (1/r) to determine the equivalent resistance. This method is best for plotting because it makes it easy to get a slope that is equal to the equivalent resistance. For example, if we have resistance R1, R2, and R3 connected in parallel, the equivalent resistance can be found as follows:
1/Req = 1/R1 + 1/R2 + 1/R3Therefore, if we plot 1/R versus the current, the slope of the line will be equal to the equivalent resistance.
Learn more about ohm's law at brainly.com/question/1247379
#SPJ11
250 pg dust particle has charge -250e. Its speed is 2.0 m/s at point 1, where the electric potential is V1 = 1200 V. What speed will it have at point 2, where the potential is V2 = -6500 V? Ignore air resistance and gravity. Express your answer with the appropriate units. ol μΑ ? m V2 = Value
The dust particle will have a speed of 44.5 m/s at point 2.The speed of the dust particle will be determined by its charge and the potential difference between the two points. According to the formula for electric potential energy, E=qV, where q is the charge of the particle and V is the electric potential, then we can calculate the change in electric potential energy between the two points:
To solve this problem, we can use the conservation of energy principle, which states that the total energy of a system is conserved. In this case, the initial energy of the dust particle at point 1 is equal to its final energy at point 2.
At point 1, the kinetic energy of the dust particle is given by:
KE1 = (1/2)mv1^2
where m is the mass of the particle, v1 is its speed, and KE1 is its kinetic energy.
The potential energy of the dust particle at point 1 is given by:
PE1 = qV1
where q is the charge of the particle and V1 is the electric potential at point 1.
The total energy of the dust particle at point 1 is therefore:
E1 = KE1 + PE1 = (1/2)mv1^2 + qV1
At point 2, the kinetic energy of the dust particle is given by:
KE2 = (1/2)mv2^2
where v2 is its final speed at point 2.
The potential energy of the dust particle at point 2 is given by:
PE2 = qV2
where V2 is the electric potential at point 2.
The total energy of the dust particle at point 2 is therefore:
E2 = KE2 + PE2 = (1/2)mv2^2 + qV2
Since the total energy is conserved, we can equate E1 and E2:
(1/2)mv1^2 + qV1 = (1/2)mv2^2 + qV2
Solving for v2, we get:
v2 = sqrt((2(qV2 - qV1) + mv1^2)/m)
Substituting the given values, we get:
v2 = sqrt((2(-250e)(-6500 V - 1200 V) + (250 pg)(2.0 m/s)^2)/(250 pg)) = 4.4 x 10^4 m/s
Therefore, the speed of the dust particle at point 2 is 4.4 x 10^4 m/s. It is important to note that this calculation assumes that the electric field between points 1 and 2 is uniform, which may not be the case in all situations
Therefore, the dust particle will have a speed of 44.5 m/s at point 2.
For such more questions on speed
https://brainly.com/question/13262646
#SPJ11
How the greenhouse effect traps the sun's energy in the atmosphere?
The greenhouse effect is a natural process in which greenhouse gases (like carbon dioxide, methane, and water vapor) in the Earth's atmosphere trap some of the sun's energy, warming the planet.
The greenhouse effect because it works in a similar way to how a greenhouse traps heat. Here's how it works:
1. The sun's energy enters the Earth's atmosphere as visible light and ultraviolet (UV) radiation.
2. Some of this energy is absorbed by the Earth's surface, which then radiates some of the energy back up into the atmosphere as infrared (IR) radiation.
3. Greenhouse gases in the atmosphere (like carbon dioxide) absorb some of this IR radiation, which warms the gases. This warming causes the greenhouse gases to radiate some of the energy back down to the Earth's surface. This is called "back radiation."
4. As a result, the Earth's surface receives more energy than it would have without the presence of greenhouse gases. This excess energy warms the Earth's surface and lower atmosphere, resulting in the greenhouse effect.Therefore, the greenhouse effect traps the sun's energy in the atmosphere by absorbing and re-radiating some of the infrared radiation emitted by the Earth's surface, which leads to the warming of the planet.
for such more question on greenhouse
https://brainly.com/question/19521661
#SPJ11
Light or moderate-but-steady precipitation is most often associated with ____ clouds.a. cumulonimbus
b. nimbostratus
c. lenticular
d. altostratus
In SEC, in what volume would you expect molecules that are much smaller than the fractionation range of the Sephadex SP to elute? A. Vi B. Vm C. Vav D. Vr E. Vo
The void volume (Vo), which is represented by option E, is where molecules in SEC that are significantly smaller than the fractionation range of the Sephadex SP are anticipated to elute.
Using a stationary phase, such as Sephadex SP, that contains various-sized holes packed inside a column, size exclusion chromatography (SEC) divides molecules into groups according to their sizes as they travel through the column. Smaller molecules can enter deeper into the matrix before eluting out, but bigger molecules must elute out first because they cannot fit through smaller holes. Although certain molecules may be far smaller than the fractionation range of the stationary phase and pass through the matrix unaltered, this is not always the case. These molecules are anticipated to elute in the void volume (Vo), which is the portion of the column's volume that the buffer or solvent occupies instead of the stationary phase. As a result, Vo, option E, is the right response.
learn more about Sephadex here:
https://brainly.com/question/15570783
#SPJ4
How to find heat capacity of calorimeter with hot and cold water?
This can be done using the formula:
heat capacity = (mass of hot water x specific heat capacity of hot water) + (mass of cold water x specific heat capacity of cold water) – (mass of calorimeter x temperature change).
The heat capacity of a calorimeter can be found using a hot and cold water method. To begin, you will need a calorimeter (such as a coffee cup calorimeter), a hot water source, a cold water source, a thermometer, and a timer. Start by measuring the temperature of the hot water and the cold water, then fill the calorimeter half full with the hot water and half full with the cold water.
Place the thermometer in the calorimeter and wait for a few minutes to ensure that the temperature of the water in the calorimeter is stable. Once the temperature is stable, record the temperature and use it to calculate the heat capacity of the calorimeter.
for such more questions on calorimeter
https://brainly.com/question/29137009
#SPJ11
When you hear the sound from a vehicle that is moving toward you, the pitch is higher than it would be if the vehicle were stationary. The pitch sounds higher because the
a. sound waves arrive more frequently
b. sound from the approaching vehicle travels faster
c. wavelength of the sound waves becomes greater
d. amplitude of the sound waves increases
Option (A) "sound waves arrive more frequently" is the correct answer. This is because when the sound from a vehicle that is moving toward you is heard, the pitch is higher than it would be if the vehicle were stationary.
What is pitch?Pitch is defined as the highness or lowness of a sound. In other words, pitch is a perception of the frequency of a sound. The pitch of a sound is determined by the number of sound wave cycles per second, which is measured in hertz (Hz).
What are sound waves?Sound waves are a type of energy that is propagated through the air or other mediums. Sound waves are created when an object vibrates and transmits sound energy through the air molecules around it. These vibrations create alternating regions of high and low air pressure that propagate as a sound wave.
A wavelength is defined as the distance between two successive peaks of a sound wave, and it is proportional to the frequency of the sound. When a sound wave's frequency increases, its wavelength becomes shorter, and vice versa. Therefore the correct option is A, sound waves do arrive more frequently.
To know more about the sound wave, click the link: brainly.com/question/1417453
#SPJ11
A student puts a piece of black paper and a piece of white paper in the same sunny spot. After 30 minutes, she observes that the black paper feels warmer than the white paper. Which best explains the student’s observation?(1 point)
The black paper reflects more waves from the sun than the white paper.
The black paper prevents waves from the sun from reaching the white paper.
The black paper receives stronger waves from the sun than the white paper.
The black paper absorbs more waves from the sun than the white paper.
Answer:
The black paper absorbs more waves from the sun than the white paper.
Explanation:
Black absorbs all colours, whereas other colours reflect some visible light, which causes it to absorb more energy and become hotter. Black items heat up more quickly in sunlight because they absorb radiation rather than reflect it, which is why they appear black.