Write 2/7 + 1/4 as a sum of two equivalent fractions with the same denominator

Answer:

See below picture.

Explanation:

y=2 has a y-intercept of 2, so we start graphing there. with most equations, we would follow the slope starting from that point, but y=2 doesn't have a slope. The 2 stays going all the way "across" for all x-values. I used demos to graph.

The equivalent resultant force is 1228.3 N and its location along AB, measured from A is 4.7 m.

The system of four forces acts on the roof truss. Determine the equivalent resultant force and specify its location along AB, measured from A.For the given system of forces, the components of each force should be determined first.The angle between the horizontal and the 500 N force is 60 degrees.Cos 60 = adjacent/hypotenuse Adjacent = cos 60 x 500 = 250 N This force is resolved into two components; one horizontal and the other vertical.250 N is the horizontal component.

The vertical component of this force is resolved as follows:Sin 60 = opposite/hypotenuse Opposite = sin 60 x 500 = 433 NThe system is now resolved and we get:Resolve force 700 N into components. The angle between the horizontal and the 700 N force is 30 degrees.Cos 30 = adjacent/hypotenuse Adjacent = cos 30 x 700 = 606 N

The vertical component of this force is resolved as follows:Sin 30 = opposite/hypotenuse Opposite = sin 30 x 700 = 350 N
Resolve force 600 N into components. This force acts horizontally and thus, it has no vertical component.Resolve force 800 N into components. This force acts vertically and thus, it has no horizontal component.

The components of the forces are summarized in the table below:Force components X component (N)Y component (N)5002504337006063506006000800 This information can now be used to determine the equivalent resultant force and its location.∑Fy = 250 N + 433 N + 350 N - 800 N = 233 N∑Fx = 606 N + 600 N = 1206 N Therefore;∑F = √[(∑Fx)² + (∑Fy)²]= √[(1206)² + (233)²]= 1228.3 N From the force diagram, the distance of the equivalent resultant force from A, measured along AB is given by the ratio of the moment of the force about A and the force itself:Moment of force about A = 250 x 6 + 606 x 2.5 + 600 x 1 = 5750 N.m Therefore, Distance of the force from A = Moment of force about A / ∑F= 5750 N.m / 1228.3 N= 4.7 m (to 1 decimal place)

Therefore, the equivalent resultant force is 1228.3 N and its location along AB, measured from A is 4.7 m.

Learn more about Equivalent resultant force

brainly.com/question/30833433

#SPJ11

Out of the given options, Jarrod can get the most accurate results by surveying the people wearing the home team's jersey. Therefore, the correct option is D.

A survey is an organized process of collecting and recording information from a particular group of people for the purpose of understanding and discovering the state of affairs in a particular area or issue. It is one of the most prevalent research methods used by social scientists and market researchers, among others. Surveys are used to obtain accurate data on a variety of topics, such as people's opinions and behaviors, demographic data, socioeconomic data, and much more.

Accurate surveying is critical because it assists in collecting precise data, which is critical in making sound decisions. An accurate survey provides the data needed to establish reliable conclusions, identify trends, and draw meaningful insights.

The method of conducting a survey can influence the outcome; therefore, it is critical to use the most effective approach to get accurate data.

To get the most accurate results from a survey, a researcher must be sure to construct the questionnaire correctly and analyze the data effectively.

To learn more about “survey” refer to the https://brainly.com/question/19637329

#SPJ11

The interest which josh will pay on the electric scooter with a simple annual interest of 3% is 7.50.

Interest rate can be defined as the amount of interest which is due per period, as a proportion of the amount lent, deposited, or borrowed by someone.

The interest rate formula is:

Interest Rate = {(Simple Interest × 100)}/{ (Principal × Time)}

Here,

Josh borrowed 250 from his mother to buy an electric scooter and will pay her back in one year with three simple annual interest.

The amount of interest that Josh will pay is calculated as:

Interest = Principal Amount × Rate of Interest × Time

Interest = 250 × 3

Therefore, Josh will pay his mother $7.50 in interest for the loan.

Learn more about Interest rate here:

https://brainly.com/question/13324776

#SPJ11

Answer:

perimeter=42

Area=90

Step-by-step explanation:

find the length of DEFG:

perimeter=a=b+a+b

28=10+b+10+b

28=20+2b

8=2b

4=b

finding the scale factor:

15/10=3/2

to find the perimeter of WXYZ:

the missing side:

=4x3/2

=6

perimeter=a+b+a+b

perimeter=15+6+15+6

perimeter=42

Area of WXYZ:

Area=bh

Area=15x6

Area=90

Answer:

Step-by-step explanation:

You want the measures of AO and DO in a trapezium in which AB║CD, the diagonals intersect at O, and AB = 3 cm, CD = 6 cm, CO = 4 cm, OB = 3 cm.

Diagonal AC is a transversal to parallel lines AB and CD, so alternate interior angles BAO and DCO are congruent. Vertical angles AOB and COD are also congruent, so ∆ABO ~ ∆CDO by the AA similarity postulate.

This means the side lengths are proportional, so ...

  AB/CD = AO/CO = BO/DO

  3/6 = AO/4 = 3/DO   ⇒   AO = 2, DO = 6

The measures of AO and DO are 2 cm and 6 cm, respectively.

__

Additional comment

It can help to draw a diagram.

Answer: a > -1

Explanation is in the image.

Answer:

[tex]a > -1[/tex]

Step-by-step explanation:

1) Write the equation

[tex]-2a+14 < 5a+21\\[/tex]

2) Collect like terms on their corresponding side

[tex]-7a < 7[/tex]

3) Divide -7 from both sides and flip the sign

[tex]a > -1[/tex]

If the null hypothesis is actually true, then there is a 5% chance that the researcher will end up accepting the alternative hypothesis in error, the statement is true.

If a hypothesis test is performed with a level of significance of 0.05 and the null hypothesis is actually true, then there is a 5% chance (or 0.05 probability) that the researcher will reject the null hypothesis and accept the alternative hypothesis in error.

This is known as a Type I error. The Type I error rate is determined by the level of significance of the test.

In other words, if the null hypothesis is true, but the researcher concludes that it is false (i.e., accepts the alternative hypothesis), this is an incorrect decision that is made with a probability of 0.05 or 5%, assuming a significance level of 0.05.

To learn more about alternative hypothesis:

https://brainly.com/question/25263462

#SPJ11

Angle L can be calculated as follows:

angle L = angle - 180 LMO stands for angle. MNO \sangle L = 180 - 150 - 30 degree angle L = 0

As a result, angle L is 0 degrees.

1. We know that sides AB and CD of trapezoid ABCD are parallel. We can use the tangent function to find the length of side AD because angle B is a right angle and angle ABD is 45 degrees:

AD/AB = tan(45)

AD=AB * tan(45) AD=AB

As a result, AD = 10.

2. We know that the sides PQ and RS of the trapezoid PQRS are parallel. We can use the sine function to find the length of side PS because angle Q is a right angle and angle PSQ is 60 degrees:

PS/QS sin(60) =

PS = sin * QS (60)

5 * sqrt = PS (3)

As a result, PS = 5*sqrt (3).

3. We know that the sides UV and WX of a trapezoid UVWX are parallel. We can use the cosine function to find the length of side WU because angle V is a right angle and angle WVU is 30 degrees:

WU/UV cos(30) =

UV * cos WU (30)

5 * sqrt(3) / 2 = WU

As a result, WU = (5/2)*sqrt (3).

4. We know that the sides LM and NO of the trapezoid LMNO are parallel. We can use the sine function to find the length of side MO because angle L is a right angle and angle MNO is 30 degrees:

MO/NO sin(30) =

MO = 4 / 2 MO = NO * sin(30)

As a result, MO = 2.

Because angles MNO and LMO add up to 180 degrees, we can calculate angle LMO as follows:

LMO angle = 180 - angle LMO MNO angle = 150 degrees

Finally, because angle N is a right angle, we can calculate angle L as follows:

angle L = angle - 180 LMO stands for angle. MNO\sangle L = 180 - 150 - 30 degree angle L = 0

As a result, angle L is 0 degrees.

To know more about Length visit:

https://brainly.com/question/30100801

#SPJ1

The number of students traveling are 2 students out of the 30 who are traveling out of the country this summer.  If 1/3 of the students are traveling somewhere this summer, then we can calculate the number of students who are traveling by multiplying the total number of students by 1/3:

Number of students traveling = 30 x 1/3 = 10  

Now, we need to find out how many of these 10 students are traveling out of the country. We know that 1/5 of the students who are traveling are going out of the country, so we can find the number of students who are traveling out of the country by multiplying the total number of traveling students by 1/5:

Number of students traveling out of the country = 10 x 1/5 = 2

Therefore, there are 2 students out of the 30 who are traveling out of the country this summer.

It's important to note that fractions can be converted to decimals or percentages to make them easier to work with. For example, 1/3 can be written as 0.33 or 33%, and 1/5 can be written as 0.20 or 20%. This can be particularly useful when dealing with more complex problems or when working with larger numbers.

In summary, by using the information given, we can determine that out of the 30 students in Mr. Hall's class, 10 are traveling somewhere this summer, and out of those 10 students, 2 are going out of the country. This type of problem-solving helps build math skills that are applicable in real-world scenarios, such as budgeting and planning for travel.

To know more about  traveling click here:

brainly.com/question/17235551

#SPJ4

Answer:

TAN is a mathematical function in trigonometry that stands for tangent. It is used to calculate the tangent of an angle in a right triangle, which is defined as the ratio of the length of the opposite side to the length of the adjacent side.

In equations, you can use TAN to find the value of the tangent of an angle. For example, if you have an angle of 30 degrees in a right triangle and you want to find the value of the tangent of that angle, you can use the TAN function in your calculator or programming language.

The syntax of the TAN function is usually "tan(x)", where x is the angle in radians. If your calculator or programming language uses degrees instead of radians, you may need to convert the angle to radians first using the conversion formula: radians = degrees * (pi/180).

For example, to find the value of the tangent of 30 degrees, you can use the TAN function as follows:

In degrees mode: TAN(30) = 0.57735027

In radians mode: TAN(30*pi/180) = 0.57735027

TAN can be used in various trigonometric equations and identities to solve for unknown sides or angles of a right triangle.

Step-by-step explanation:

The missing side of the rectangle is 21.

In a rectangle, opposite sides are congruent and parallel. Therefore, if we know the length and width of a rectangle, we can find the length of any missing side using the formula for the area or the perimeter of a rectangle.

In the given rectangle 8 8 3 12, the two sides are labeled 8 and 12, which represent the length and the width of the rectangle, respectively. To find the missing side, we can use the formula for the perimeter of a rectangle, which is:

Perimeter = 2 x (length + width)

Substituting the given values, we get:

Perimeter = 2 x (8 + 12)

Perimeter = 2 x 20

Perimeter = 40

Since we have the length and width of the rectangle, we can use the perimeter formula to solve for the missing side. We know that the perimeter is equal to the sum of all four sides of the rectangle, so we can write:

Perimeter = 8 + 8 + 3 + x

where x is the missing side.

Substituting the value of the perimeter (40) and simplifying, we get:

40 = 19 + x

x = 21

Find out more about rectangle

brainly.com/question/29123947

#SPJ4

Answer:

D. 24 ft

Step-by-step explanation:

Congruent means equal. Since ABCD and PQRS are congruent they are the same.

Answer:

D

Step-by-step explanation:

The probability of getting the complete set of cards in Box 5 is 3/64.

To calculate the probability of getting the complete set of cards in Box 5, we have to consider the probability of getting each of the 4 cards in the previous 4 boxes.

For the first box,

The probability of getting any one of the 4 cards is 1,

since there are no previous boxes to consider.

For the second box,

The probability of getting a card that is not already in our possession is 3/4 (since there is one card already collected).

For the third box,

The probability of getting a card that is not already in our possession is 2/4 (since there are now two cards already collected).

For the fourth box,

The probability of getting a card that is not already in our possession is 1/4 (since there are now three cards already collected).

Multiplying these probabilities together, we get,

⇒ 1 x 3/4 x 2/4 x 1/4 = 3/64

So the probability of getting the complete set of cards in Box 5 is 3/64.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ12

The probability that at most of the parts are defective is 0.96.

A machine that manufactures automobile parts produces defective parts of the time. If parts produced by this machine are randomly selected, what is the probability that at most of the parts are defective?

The given probability of producing defective parts is P(defective) = 0.15. Now, we need to find the probability that at most of the parts are defective. This can be done by finding the probability of producing 0, 1, or 2 defective parts.

Let X denotes the number of defective parts. So, we have to calculate the probabilities for P(X = 0), P(X = 1), and P(X = 2). To calculate these probabilities, we will use the binomial probability formula:

P(X = x) ={n}C{x} p^x (1 - p)^{n - x}, Here, n = number of parts produced, p = probability of producing defective parts

x = number of defective parts

First, we need to find P(X = 0),

P(X = 0) = (0.85)^5 = 0.4437

P(X = 1) = {5}C{1} (0.15)^1 (0.85)^4 = 0.3672

P(X = 2) = {5}C{2} (0.15)^2 (0.85)^3 = 0.1459

Now, we can find the probability that at most of the parts are defective as follows:

P{at most 2 defective parts}) = P(X = 0) + P(X = 1) + P(X = 2) = 0.957

Therefore, the probability that at most of the parts are defective is 0.96.

To learn more about probability refer :

https://brainly.com/question/12905909

#SPJ11

Wilson and William were measured at various times, therefore drawing the inference that Wilson grew more over the course of a year than William is incorrect and the statistics is misleading.

Inferential statistics and descriptive statistics are two disciplines of statistics with distinct applications.

Summarizing and characterizing gathered data is the focus of descriptive statistics. It uses techniques including graphical presentations, measurements of variability, and measures of central tendency, such as mean, median, and mode (e.g., histograms, box plots). The purpose of descriptive statistics is to shed light on a sample's or population's properties, such as its distribution, dispersion, and shape.

Wilson and William were measured at various times, therefore drawing the inference that Wilson grew more over the course of a year than William is incorrect.

Learn more about statistics here:

https://brainly.com/question/23091366

#SPJ1

The condition that must be true in order for a confidence interval based on de Moivre's equation to be valid is:

d. The underlying distribution of the data must be normally distributed.

A confidence interval is an interval estimate of a population parameter that specifies a range of values within which the parameter is likely to lie with a certain level of confidence. In other words, it represents the degree of uncertainty associated with the estimate.

De Moivre's equation is a formula for approximating the probability of a specific number of successes in a series of independent Bernoulli trials. This formula is only relevant if the sample size is large enough such that the normal approximation to the binomial distribution is valid. Thus, this formula can be used to calculate confidence intervals for binomial proportions when the sample size is large enough to apply the normal approximation.

Answers to other options:

a. We must be forming a confidence interval for a coefficient in a multiple regression model - This statement is incorrect. De Moivre's equation is not related to multiple regression models.

b. All of these answers are correct - This statement is incorrect because not all of the options are correct. Only one option is correct.

c. We must be forming a confidence interval for a population mean based on a sample mean - This statement is incorrect. De Moivre's equation is not relevant for calculating confidence intervals for population means. The Central Limit Theorem is used instead.

Hence, option "d" only is true.

To know more about "de Moivre's equation":https://brainly.com/question/17120893

#SPJ11

Answer:

Step-by-step explanation:

(3x+1)^2 = 3x+3

9x^2 +6x +1=3x+3

9x^2+3x-2=0

finally we got a trinomial quadratic equation solve by factorizing

9x^2 -6x+3x-2=0

3x(3x-2)+(3x-2)=0

3x-2 = 0 or 3x+1=0

x= 2/3 or x= -1/3

There will be 30 yards of the string that will be leftover.

What are Arithmetic operations?

It is a field of mathematics that deals with the study of numbers and the operations on those numbers that are relevant to all other areas of mathematics. The basic operations included in it are addition, subtraction, multiplication, and division. The term "arithmetic operator" refers to the operator that does the calculation.

Given that,

Total Length of string = 50 yards.

The total number of students = 24.

Total used string = 24 × 30 = 720.

We know that 1 foot = 12 inches,

So, 150 feet = 1800 inches.

Therefore, yards of string leftover = (1800 - 720)/36

                                                         = 1080/36

                                                         = 30 yards.

Hence, there will be 30 yards of string that will be leftover.

To learn more about arithemetic operations, refer to:

https://brainly.com/question/25834626

#SPJ4

The expression (6 + 2a) - (-a - 5) is equivalent to 3a + 11. The other options given are not equivalent to (2a + 6) - (-a-5).

In mathematics, a negative sign is a symbol used to represent a negative value or operation. It is represented by the symbol "-", which is usually placed before a number to indicate that the number is negative.

To simplify (2a + 6) - (-a-5), we can distribute the negative sign:

(2a + 6) - (-a-5) = 2a + 6 + a + 5 = 3a + 11

Therefore, the expression equivalent to (2a + 6) - (-a-5) is:

3a + 11

Out of the options given, the equivalent expression is:

(6 + 2a) - (-a - 5)

We can simplify this expression in the same way as above:

(6 + 2a) - (-a - 5) = 6 + 2a + a + 5 = 3a + 11

Therefore, the expression (6 + 2a) - (-a - 5) is equivalent to 3a + 11.

The other options given are not equivalent to (2a + 6) - (-a-5).

To know more about negative sign visit:

https://brainly.com/question/29461821

#SPJ1

Andre can make 6 small cranes. X is the number of small cranes, 3x is the minutes, 10 is the minute for large cranes and 30 is the total time.

3x + 10 is less than or equal to 30

3 is the minutes for the small cranes

X is the number of small cranes

10 is the minutes for the large crane

30 is the total time limit

first, subtract 10 from 30, ( 30-10) which gives you 20 so

3x is less than or equal to 20.

To figure this out, divide 20 by 3, which gives you 6 as a quotient with a remainder of two minutes.

Andre can make 6 small cranes.

Learn more about Inequality here: brainly.com/question/30231190

#SPJ4

The Complete question is

Andre is making paper cranes to decorate for a party. He plans to make one large paper crane for a centrepiece and several smaller paper cranes to put around the table. It takes Andre 10 minutes to make the centrepiece and 3 minutes to make each small crane. He will only have 30 minutes to make the paper cranes once he gets home.

​Andre wrote the inequality 3x + 10 ≤ 30 to plan his time. Describe what x, 3x, 10, and 30 represent in this inequality.

Solve Andre’s inequality and explain what the solution means.

The Pigeon-hole Principle states that if there are more pigeons than pigeonholes, then at least one pigeonhole must contain more than one pigeon. This proves that among any group of d+1 integers there are two with exactly the same remainder when divided by d.

This concept can be applied to your question: If there are d+1 integers, and we divide each of them by d, there are at most d remainders that can be obtained. This means that two of the integers must have the same remainder when divided by d.
To prove this, let us assume that all d+1 integers have different remainders when divided by d. Then the remainders must range from 0 to d-1. For example, if d=5, then the remainders must be 0, 1, 2, 3 and 4. Let us denote the integers by x0, x1, x2, ... , xd. Now we can apply the Pigeon-hole Principle. We have d+1 pigeons (x0, x1, x2, ... , xd) and d pigeonholes (remainders 0, 1, 2, 3, 4). Since d+1 is greater than d, at least one pigeonhole must contain more than one pigeon. This means that two of the integers must have the same remainder when divided by d.

For more questions on integers

https://brainly.com/question/12399107

#SPJ11

Answer:

Zeros: x = -10 and x = -3

Vertex: [tex](-\frac{13}{2} , \frac{49}{4} )[/tex]

Step-by-step explanation:

We are given the following function:
f(x) = -(x+3)(x+10)

We want to find the zeros and the vertex of the parabola.

The zeros are the values of the function where f(x) = 0.

So, in order to find the zeros, we can set f(x) = 0.

0 = -(x+3)(x+10)

We can divide both sides by -1, to get:

0 = (x+3)(x+10)

To solve this, we will use zero product property.
Split and solve:

x+3 = 0

x = -3

x+10=0

x = -10

Now, to find the vertex, we first get the average of the zeros.

Add the values of the zeros together, then divide by two:

[tex]\frac{-3-10}{2}[/tex] = [tex]\frac{-13}{2}[/tex]

Now, we plug this in for x to get the y value (found through f(x)) of the vertex.

[tex]f(-\frac{13}{2}) = -(-\frac{13}{2} + 3) (-\frac{13}{2} + 10)[/tex] = [tex]\frac{49}{9}[/tex]

So, the vertex is [tex](-\frac{13}{2} , \frac{49}{4} )[/tex]

Answer:

p = 0, p = -7/3

Step-by-step explanation:

We are given the following equation:
3p² + 7p = 0

We want to solve the equation by factoring.

To factor, we want to look for a common term that we can pull out.

You may notice that both terms have 'p' in common, so we can pull out p from both terms.

This will then make the equation:

p(3p + 7) = 0

Now, we can use zero product property to solve the equation.

p = 0

3p + 7 = 0

Subtract.

3p = -7

Divide.

p = -7/3

Our answers are p = 0 and p = -7/3

The rewritten expression  3.00 +2.25(m-1) is 2.25m + 0.75.

The cost for a taxi ride is $3.00 for the first mile and $2.25 for each additional mile.

Therefore, let's rewrite the expression 3.00 +2.25(m-1) for the cost of the taxi ride in dollars as a sum of two terms, where m represents the miles travelled.

Hence,

Therefore, the cost using expression is as follows:

3 + 2.25(m - 1)

3 + 2.25m - 2.25

combine like terms

2.25m + 3 - 2.25

2.25m + 0.75

learn more on expression here: https://brainly.com/question/11121991

#SPJ1

As per the combination method, the number of tickets that we put in that are marked "outer" is 3 (option d).

In this case, we want to choose the number of tickets marked "outer." Let's call this number k. We know that we already put one ticket marked "inner" in the box, so the total number of tickets in the box is 2. Therefore, n = 2.

Now we need to determine k. We want to know how many tickets we need to put in that are marked "outer." We can represent this as a. So we have:

ᵃC₁ = a! / ((1!)(a-1)!) = a

We want to find the value of a that satisfies the condition that the probability of choosing an "inner" ticket is 1/3 and the probability of choosing an "outer" ticket is 3/2.

Since we already put in 1 ticket marked "inner," the probability of choosing an "inner" ticket is 1/2, which means the probability of choosing an "outer" ticket is also 1/2.

We know that the probability of choosing an "outer" ticket is 3/2, so we can set up the following equation:

ᵃC₁ / 2 = 3/2

Solving for a, we get:

a = 3

In conclusion, the answer is (d) 3.

To know more about combination here

https://brainly.com/question/28998705

#SPJ4

We have that, if they put 40 chips in a hat, each one with the numbers 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10, and each number is put on four chips. Four tokens are drawn from the hat at random and without replacement, the value of q/p, q,p as probabilities, will be given by 360, therefore, the correct option is (D) 360

The probability that all four tokens have the same number (p) is equal to the total number of possible outcomes that meet that criterion divided by the total number of possible outcomes.

In this case, there are 10 possible numbers that could come up (1-10). Therefore, there are 10 possible outcomes for the four slips of paper that have the same number. Each outcome has the same probability of 1/10, so p = (1/10)^4 = 1/10000.

The probability that two of the slips have a number a and the other two have a number b (q) is equal to the total number of possible outcomes meeting that criterion divided by the total number of possible outcomes.

In this case, there are 10 possible numbers that could be drawn (1-10) and 2 ways to choose 2 different numbers out of 10, so there are 20 possible outcomes for two of the slips bearing a number and the other two bearing a number b. Each outcome has the same probability of 1/20, so q = (1/20)^4 = 1/3200000.

The ratio of q to p is q/p = 3200000/10000 = 360. Therefore, the value of q/p is 360.

See more information about probability in: https://brainly.com/question/24756209

#SPJ11

Answer:Given : number of hours spent studying for a history final exam and the score on that exam.

To Find : Which value is an outlier

(1.5, 65)

(3.5, 71)

(4.5, 98)

(6.5, 88)

Solution:

Number of hours spent studying =x            

Exam score   = y

x         y

1.5       65

2         68

3.5      71

4.5      98

6         82

1.5 -   2   difference = 0.5

2 - 3.5     difference = 1.5

3.5 - 4.5   difference = 1

4.5 - 6       difference = 1.5

No outlier

65  - 68   Difference  3

68 - 71      Difference  3

71 -  98      Difference  27

71 - 82     Difference  11

Hence 98 is outlier

(4.5    ,  98 )  is outlier

Learn More:

Mrs. Juarez graded ten English papers and recorded the scores. 92 ...

brainly.in/question/16382460

If the first quartile is 142 and the semi-interquartile range is 18, find ...

brainly.in/question/13279139

first quartile is 20 then semi-inter quartile range is

brainly.in/question/13187486

Step-by-step explanation:

To design a cylindrical can (with a lid) to contain 1 liter (= 1000 cm3) of water, using the minimum amount of metal, we need to consider the following parameters:Height and Diameter of the canThickness of the metalMaterial used for making the canLet's assume we use Aluminium as a material. Now, let's start designing the can:Height of the can:

Volume of water = 1000 cm3Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³h = (4000 cm³) / (π d²) h = (4000 cm³) / (3.14 * d²) h = (1273.24) / d²Diameter of the can:

Volume of cylinder = πr²hVolume of cylinder = π (d/2)² hVolume of cylinder = π (d²/4) hVolume of cylinder = 1000 cm³π (d²/4) h = 1000 cm³d²h = 4000 cm³d² = (4000 cm³) / h d² = (4000 cm³) / (1273.24/d²) d² = 3.1425d = 17.8 cmThickness of the metal:We can assume the thickness to be 0.5 mm.Material used for making the can:AluminiumTotal Surface Area of the can:Total Surface Area of cylinder = 2πrhTotal Surface Area of cylinder = 2π(d/2)(1273.24/d²)Total Surface Area of cylinder = 1273.24/d Total Surface Area of lid = πr²Total Surface Area of lid = π (d/2)²Total Surface Area of lid = π (17.8/2)²Total Surface Area of lid = 248.5Total Surface Area of the Can = 1273.24/d + 248.5Now, we can calculate the minimum amount of Aluminium required to make the can by minimizing the Total Surface Area of the can.Total Surface Area of the can = 1273.24/d + 248.5d (in cm)Total Surface Area of the can = 1273.24/7.09 + 248.5(7.09)Total Surface Area of the can = 584.24Therefore, the minimum amount of Aluminium required to make the can is 584.24 cm².

for such more questions on Total Surface Area

https://brainly.com/question/31186196

#SPJ11