which of the following are common blockchain analysis heuristics that can be used to deanonymize bitcoin users? group of answer choices common input ownership coinjoin address reuse round number output

The identifier used to distinguish between VLANs in a network is called a b) VLAN ID (VID).

As a network analyst at a securities firm, I would use SAID (Service Access Identifier) as the identifier for each VLAN used in the network. SAID is a unique 12-bit number that is used to differentiate between VLANs on a given network segment.

This number is included in the Ethernet frame header and allows connecting devices to identify which VLAN a transmission belongs to. SAID is a reliable and widely used method for VLAN identification and is supported by most modern networking equipment.

Using SAID would ensure efficient and secure communication within the VLANs of the securities firm's network.

For more questions like VLAN click the link below:

https://brainly.com/question/30651951

#SPJ11

The Domain Name System (DNS) resource record that is used only for reverse name resolution is d. PTR.

DNS is a protocol that is used on the Internet to convert IP addresses into domain names and back again. DNS serves as a directory for domain names, converting them into their IP addresses so that computers can communicate with one another.DNS resource records: The various types of DNS resource records are as follows:A: Stands for Address. It is used to connect a domain name to an IP address.AAAA: IPv6 AddressesMX: It is utilized to indicate mail exchange servers for a domain.NS: Stands for Name Server. It specifies which name servers are in charge of the domain.CNAME: Canonical Name, Alias. This is used to connect one domain name to another PTR: Pointer Record. This is used for reverse DNS queries, which convert IP addresses to domain names.

Learn more about  Domain Name System:https://brainly.com/question/18274277

#SPJ11

The statement that does not describe the classical pathway of complement activation is d. It does not activate T helper cells by presenting antigen to them.

The classical pathway is one of the three pathways that lead to complement activation, which is an essential part of the innate immune response.

It is triggered when antibodies, specifically IgM or IgG, bind to antigens on the surface of pathogens or infected cells. The binding of the antibody triggers a cascade of enzymatic reactions, ultimately resulting in the activation of C3 and C5 complement proteins.

This activation leads to enhanced inflammation, opsonization, and formation of the membrane attack complex (MAC), which can destroy the pathogen or infected cell. While the classical pathway does not directly activate T helper cells, it can indirectly contribute to the adaptive immune response by enhancing antigen presentation to T cells.

Read more about classical pathway here:

https://brainly.com/question/30548281

#SPJ1

Written a python program to convert a positive integer to its reverse binary representation.

What is Python?
Python is a high-level, interpreted programming language that was first released in 1991. It was created by Guido van Rossum and is currently maintained by the Python Software Foundation. Python is designed to be easy to read and write, with a syntax that emphasizes code readability and simplicity.

Python is widely used in many different domains, including web development, scientific computing, data analysis, artificial intelligence, and machine learning. It has a large standard and supports many third-party packages and frameworks, making it a versatile language that can be used for a wide range of tasks.

Python is also cross-platform, meaning that it can be used on different operating systems, such as Windows, macOS, and Linux. Its popularity has led to the creation of many resources and communities, making it easy to find help and support when using Python.

Algorithm:

step1=int(input("Enter a positive number: ")) #take user input

step2=reverse_Binary(number) #call reverse_Binary() function

step3=def reverse_Binary(number) #function to determine reverse binary

step4= if(number>0) #in the scenario when number is greater than 0

step5=(number%2) #print the output number modulo 2

step6= reverse(number//2) #assign number to number/2 and call reverse_Binary() function recursively

Here's a Python code that implements the algorithm you described to convert a positive integer to its reverse binary representation:

def reverse_binary(n):

   result = ''

   while n > 0:

       result += str(n % 2)

       n //= 2

   return result

This code takes in a positive integer n and returns a string of 1's and 0's representing n in reverse binary.

For example, if you call reverse_binary(6), the function will return '011' because the binary representation of 6 is 110, and the function outputs the bits in reverse order.

You can test the function with different inputs to see if it works correctly.

To know more about software visit:
https://brainly.com/question/985406
#SPJ1

The IP address that is a Class C address is (c) "193.19.101.11".

In IP addressing, Class C addresses are defined as IP addresses whose first three octets (i.e., the first 24 bits) are used to identify the network portion of the address, while the last octet (i.e., the last 8 bits) is used to identify hosts on that network. Class C addresses always have the first octet in the range of 192 to 223.

In the given IP addresses, "193.19.101.11" is the only IP address that has the first octet in the Class C range of 192 to 223. Therefore, "193.19.101.11" is a Class C address. The other three IP addresses are not Class C addresses.

Thus, otpion (c) is the correct answer.

You can learn more about IP address at

https://brainly.com/question/14219853

#SPJ11

Storing data in a relational database avoids all the mentioned problems associated with storing data in a list. Thus, Option E, All of the above, is correct.

A relational database is a data storage structure that uses multiple tables to store data. Each table contains rows and columns, with each row representing a unique record and each column representing a unique field.

Relational databases are the most prevalent type of database used in industry because they are effective at storing and managing structured data, which is data that can be easily organized into tables with distinct columns and rows.

They are made up of multiple tables that are related to one another in some way. Relational databases use a structured query language (SQL) to communicate with the database. SQL is a standard language that is used to access, manipulate, and query relational databases.

Option E is correct.

Learn more about relational database https://brainly.com/question/13262352

#SPJ11

Answer:

The correct answer is:

Syntax errors are specific to a specific programming language.

Explanation:

Syntax refers to the set of rules and structure that govern the proper composition of statements and expressions in a programming language. Syntax errors occur when the code violates these rules, such as a missing semicolon or an incorrect use of brackets.

Different programming languages have different syntax rules, so syntax errors are specific to a particular programming language. For example, a syntax error in Java will be different from a syntax error in Python.

Therefore, option C is the correct answer. Options A, B, and D are all incorrect.

There are two possible programming languages that can be used to create a program that reads the student information from a tab-separated values (TSV) file, and then creates a text file that records the course grades of the students. These languages are Python and Java.

To create this program in Python, one can use the csv module to read and write CSV files, including TSV files. One can start by importing the csv module and opening the input file using the "with" statement. Then, one can read the contents of the input file using csv.reader and store the information in a list. After that, one can loop through the list, compute the average grades for each student, and write the results to an output file using csv.writer.

Here is a sample code that demonstrates how to create this program in Python [1]:

import csv

input_file = "StudentInfo.tsv"

output_file = "StudentGrades.txt"

with open(input_file, "r") as infile, open(output_file, "w") as outfile:

   reader = csv.reader(infile, delimiter="\t")

   writer = csv.writer(outfile)

   header = next(reader)  # skip header

   writer.writerow(["Last Name", "First Name", "Average Grade"])

   for row in reader:

       last_name, first_name, midterm1, midterm2, final = row

       average_grade = (float(midterm1) + float(midterm2) + float(final)) / 3

       writer.writerow([last_name, first_name, average_grade])

To create this program in Java, one can use the Scanner class to read input from the TSV file and PrintWriter class to write output to a file. One can start by creating a Scanner object and opening the input file. Then, one can read the contents of the input file line by line, split each line using the tab character as a delimiter, and store the information in an array. After that, one can compute the average grade for each student and write the results to an output file using PrintWriter.

Here is a sample code that demonstrates how to create this program in Java

java

Copy code

import java.io.File;

import java.io.FileNotFoundException;

import java.io.PrintWriter;

import java.util.Scanner;

public class StudentGrades {

   public static void main(String[] args) throws FileNotFoundException {

       String input_file = "StudentInfo.tsv";

       String output_file = "StudentGrades.txt";

       Scanner scanner = new Scanner(new File(input_file));

       PrintWriter writer = new PrintWriter(new File(output_file));

       writer.println("Last Name\tFirst Name\tAverage Grade");

       while (scanner.hasNextLine()) {

           String line = scanner.nextLine();

           String[] fields = line.split("\t");

           String last_name = fields[0];

           String first_name = fields[1];

           double midterm1 = Double.parseDouble(fields[2]);

           double midterm2 = Double.parseDouble(fields[3]);

           double final_exam = Double.parseDouble(fields[4]);

           double average_grade = (midterm1 + midterm2 + final_exam) / 3;

           writer.println(last_name + "\t" + first_name + "\t" + average_grade);

       }

       scanner.close();

       writer.close();

   }

}

In summary, to create a program that reads the student information from a TSV file and computes the average grades for each student, one can use Python or Java.

Find out more about Program

brainly.com/question/28961326

#SPJ4

Mathematics issues known as constraint satisfaction problems (CSPs) are described as sets of objects whose states must adhere to a variety of restrictions or limitations. For solving a problem using constraint satisfaction methods, CSPs describe the entities as a homogeneous collection of finite constraints over variables.

rectilinear floor-planning:

Suppose the huge rectangle is W inches wide by H inches tall. Four parameters, x, y, w, and h, provide the position, width, and height of each rectangle Ri. The same set of restrictions apply to all smaller rectangles.

                                   Ri,x ≥ 0

                         Ri,x + Ri,w ≤ W

                                  Ri,y ≥ 0

                             Ri,y + Ri,h ≤ H

This confines each rectangle to the large rectangle's inside. Moreover, there are a number of restrictions, Cij, between the rectangles I and j, I 6= j.

                   Ri,x + Ri,w ≤ Rj,x or Ri,x ≥ Rj,x + Rj,w

                   Ri,y + Ri,h ≤ Rj,y or Ri,y ≥ Rj,y + Rj,h

class scheduling: There are set numbers of professors and classrooms, a schedule of classes to be offered, and potential class times. Each professor can only teach a certain number of classes.

Answer:

Instructors, subjects, classrooms, and time slots are the four factors in this issue.

Tij and Sij are two constraint matrices that we can employ. Tij stands for a teacher who was present in class I at time j. Sij stands for a topic being covered in class I at moment j. The set of teachers is the domain for each Tij variable. Each Sij variable's domain is the collection of topics. Let's use D(t) to signify the range of subjects that the instructor t is qualified to teach.

the constraints will be Tij ≠ Tkj          k≠ i

In general C(Tij , Sij ) = {(t, s)| teacher t can teach subject s}

To know more about constraint satisfaction visit:

https://brainly.com/question/30883995

#SPJ1

This document represents a procedural guide, A Standard Operating Procedure (SOP), which outlines the steps needed to successfully log into the company server. It serves as a reference for employees and helps them understand the steps to complete the task.

When Tejay started his new job, he found the step-by-step process for logging into the company server set forth in a laminated document by computer. This document represents a Standard Operating Procedure (SOP).

A Standard Operating Procedure (SOP) is a comprehensive and step-by-step set of written instructions designed to serve as a guide for employees on how to perform routine or complex procedures or practices effectively and safely.

In any organization or business, Standard Operating Procedures (SOPs) are essential for consistent quality, efficient execution, and to meet regulatory requirements. They offer a step-by-step guide to facilitate consistency, reduce variability, and enhance productivity in various business operations.

For more such questions on Standard Operating Procedure (SOP) , Visit:

https://brainly.com/question/13530380

#SPJ11

There are a few things that could be bad effects of intellectual property rights:

The other choices have nothing to do with intellectual property:

Rephrased if the above is hard to understand.

B- General patents can stop people from getting patents on new ideas: Patents are meant to spur innovation by giving inventors exclusive rights for a limited time, but patents that are too broad or general can have the opposite effect. They could stop other inventors from making new products or technologies that are similar to the patented invention but different in some way. This would slow down innovation.

C- Companies may be too strict with trademarks and patents: Too much enforcement can hurt competition, stop people from coming up with new ideas, and lead to lawsuits and legal costs that aren't necessary. When companies use their intellectual property rights to stop others from using similar ideas or products, they hurt both customers and competitors. This is because it can make it harder for people to find other products and ideas, raise prices, and make the market less diverse.

Options A, D, and E, on the other hand, are not bad things that could happen because of intellectual property rights. Option A, "No two companies can make the same products," is not always true, since companies can make similar products without violating each other's intellectual property rights. Option D, "Hackers can easily add malware to well-known apps," has nothing to do with intellectual property rights. Instead, it is about cybersecurity. Option E, "Businesses may not be able to talk to each other safely," is also not directly about intellectual property rights. Instead, it is about data privacy and security.

In order to meet your goal, as a system administrator of a large organization, you can follow the plan the recovery of the system before any further failure occurs.

Learn more about boot  here: https://brainly.com/question/27773523

#SPJ11

The pointer that automatically points to the address of any object that is instantiated from any class is called "this" pointer.

The "this" pointer is a keyword in C++ that refers to the object that the member function is being called on. It is a pointer to the object that the member function belongs to and can be used to access the members of the object. The "this" pointer is automatically created by the compiler for every member function in a class, and its value is set to the address of the object that the function is called on.

You can learn more about pointer at

https://brainly.com/question/28574563

#SPJ11

The probability model for the total amount won or lost, Y, after playing roulette three times with a $1 bet on red, is a binomial distribution with parameters n = 3 and p = 18/38. The possible outcomes for Y are: -3, -1, 1, and 3, with respective probabilities of 0.274, 0.453, 0.242, and 0.031.

This model is correct because each trial is independent and has only two possible outcomes: win or lose. The probability of winning is 18/38, which corresponds to a success in the binomial distribution. The total amount won or lost after three trials can be obtained by summing the amount won or lost in each trial. The binomial distribution provides a way to calculate the probability of each possible sum.

Other options, such as a normal distribution or a Poisson distribution, are not appropriate because they are not suitable for modeling the number of successes in a fixed number of trials with only two possible outcomes. A normal distribution assumes that the data is continuous and symmetric, which is not the case here. A Poisson distribution is suitable for modeling the number of events that occur in a fixed time interval, but it is not appropriate for modeling the number of successes in a fixed number of trials with only two possible outcomes.

Therefore, the binomial distribution is the correct probability model for the total amount won or lost after playing roulette three times with a $1 bet on red, with possible outcomes of -3, -1, 1, and 3, and respective probabilities of 0.274, 0.453, 0.242, and 0.031.

You can learn more about binomial distribution at

https://brainly.com/question/9325204

#SPJ11

Option-D: Beta sheets are a type of secondary structure in proteins. They are formed when protein strands are folded and linked by hydrogen bonds to form a pleated sheet-like structure. Beta sheets may be formed in parallel and anti-parallel configurations.

Their strands may be made up of either beta-alpha or beta-beta units. A beta-alpha unit comprises of alternating beta-strand and alpha-helical regions. The Beta-beta units are composed of contiguous beta-strands. It is worth noting that the above statements are correct. Therefore, option (D) is the correct response to the question.Beta sheets are a protein secondary structure where protein strands are folded and linked by hydrogen bonds to form a pleated sheet-like structure.

The sheets can either be formed in parallel or antiparallel configurations. There are two major types of beta sheets: beta-alpha and beta-beta. The strands of beta-alpha sheets are composed of alternating beta-strand and alpha-helical regions. On the other hand, beta-beta units are made up of contiguous beta-strands. Beta sheets are common in proteins, and they play a critical role in maintaining the structural stability of proteins.

Beta sheets are stabilized by hydrogen bonds between backbone atoms of amino acid residues in adjacent strands. They are held together by interstrand hydrogen bonds that occur between a carbonyl oxygen atom of one strand and an amide nitrogen atom of an adjacent strand.

For such more questions on beta sheets :

brainly.com/question/30502283

#SPJ11

Given code represents the concept of iterating an arraylist.They have several built-in capabilities, such as automatically expanding to accommodate new elements, removing and inserting elements, and sorting elements using the Collections.sort() method.

ArrayLists are more flexible and powerful than arrays because they can be expanded and shrunk as needed. The ArrayList class is a component of the Java Collections Framework, which is a collection of classes and interfaces for handling collections of objects. The following is a brief list of some of the key methods in the ArrayList class:add() - adds an element to the listget() - retrieves an element from the listremove() - removes an element from the listsize() - returns the size of the listset() - modifies an element in the listindexOf() - returns the index of the first occurrence of an element in the list. Iteration is the act of repeating a process a set number of times or until a certain condition is met. In computer programming, iteration refers to the process of looping through a set of data or a section of code repeatedly until a particular condition is met.

Learn more about Collections.sort(): https://brainly.com/question/30636676

#SPJ11

The correct answer is To find the country with the highest average meat production per capita for the years 2008-2012 in the CO2 Emissions dataset, we can follow these steps:

Open the dataset in a spreadsheet software or data analysis tool that allows sorting and filtering. Find the column that contains the meat production per capita data. In this dataset, it is the column named "meatpercapita". Filter the dataset to show only the data for the years 2008-2012. To do this, we can use the "year" column and select the years 2008-2012 from the filter options. Use the aggregation function to calculate the average meat production per capita for each country over the years 2008-2012. In Excel or we can use the AVERAGEIF or AVERAGEIFS function respectively. Sort the results by the average meat production per capita column in descending order. The top row of the sorted results will show the country with the highest average meat production per capita for the years 2008-2012. Using this method, we can see that Denmark has the highest average meat production per capita for the years 2008-2012 in the CO2 Emissions dataset.

To learn more about  CO2 Emissions click on the link below:

https://brainly.com/question/28314680

#SPJ1

The forward priming is likely to occur if there is only a small delay separating two messages. The backward priming is likely to occur when there is a longer delay and the time elapsed since the second message is small.

The phenomenon that is likely to occur if there is only a small delay separating two messages is called "forward priming". Forward priming refers to the influence of a prior stimulus (the first message) on the processing of a subsequent stimulus (the second message) when the two are presented close together in time.

On the other hand, the phenomenon that is likely to occur when there is a longer delay and the time elapsed since the second message is small is called "backward priming". Backward priming refers to the influence of a subsequent stimulus (the second message) on the processing of a prior stimulus (the first message) when the two are presented close together in time.

You can learn more about primers at

https://brainly.com/question/15872813

#SPJ11

The correct statement when describing the flow of information in a control system is that the controller evaluates received information.

A control system is a device that helps to regulate or monitor the behavior of other devices, machines, or systems. Control systems are generally found in manufacturing facilities, power plants, and other industrial settings.

In most cases, they are used to regulate processes that are too dangerous or complex to be handled by humans. They are also used to optimize processes for efficiency and reduce the number of human errors involved in complex processes.

In a control system, information flows in a certain pattern. The pattern starts with the input, moves to the controller, then to the actuators and sensors, and finally to the output.

The input is any data that is fed into the control system. This could be a temperature reading, a signal from a switch or button, or any other information that is relevant to the operation of the control system.

The controller is the central device in the control system. It evaluates the information it receives from the input and determines what action to take next. The controller is responsible for making sure that the system operates smoothly and efficiently.

The actuators and sensors are the devices that are responsible for carrying out the actions that are determined by the controller. They may include motors, pumps, valves, or other devices that move or manipulate the system in some way.

Sensors are used to detect changes in the environment or other conditions that may require the system to take action. The output is the final result of the system's operation. It may be a product, a signal, or any other output that is relevant to the operation of the control system.

The output is generally monitored and evaluated by the input device to ensure that the system is operating correctly. The statement that is accurate when describing the flow of information in a control system is that the controller evaluates received information.

To know more about the control system:https://brainly.com/question/24260354

#SPJ11

The statement "Compared with traditional methods, the entire rapid application development (RAD) process is expanded and, as a result, the new system is built, delivered, and placed in operation much later" is FALSE.

Learn more about Rapid Application Development here: https://brainly.com/question/19166973

#SPJ11

Desktop publishing software is a type of tool that gives designers the ability to make sophisticated publications with text, pictures, and lots of color.

To learn more about Desktop publishing, refer to:

https://brainly.com/question/7221406

The -recursive option for the chown command changes the ownership of all the subdirectories of any specified directories, rather than just the files or directories that are explicitly passed to it. The correct answer is C, -recursive.

The option that changes the ownership of all the subdirectories of any specified directories, rather than just the files or directories that are explicitly passed to it is `-R`.The chown is a command that stands for "change owner," and it is used to alter the owner of a file, directory, or symbolic link. The chown command modifies the ownership of a file in Linux, which is useful when changing the owner of a file from one user to another or when changing the owner of a file to a new user account.

The chown command is also used to change the group ownership of a file, directory, or symbolic link. In this case, you'll use the chgrp command in conjunction with the chown command. When the chown command is used with the -R option, it changes the ownership of all subdirectories and files in the specified directory, as well as the directory itself, to the specified owner.

You can learn more about chown command at: brainly.com/question/10395874

#SPJ11

To create LAN a connection using a mobile device, the two options that most readily allow you to create the connection without using a physical tether are: - Use Wi-Fi to connect to a LAN and - Create a mobile Wi-Fi hotspot

Using Bluetooth connection to connect to a LAN is not an option as it is not a reliable option for LAN connections. Using a USB cable connection to connect to the LAN is not possible without physically tethering the device to the LAN. Using RFID or NFC connection to connect to the LAN is also not a feasible option.

Learn more about LAN connection using a mobile device: https://brainly.com/question/29646212

#SPJ11

Your question is incomplete, but probably the complete question is :

You need to create LAN a connection using a mobile device. Which of the following will most readily allow you to create the connection without using a physical tether? Select two.

Use Bluetooth to connect to a LAN

Use Wi-Fi to connect to a LAN

Use a USB cable to connect to the LAN

Create a mobile Wi-Fi hotspot

Use RFID or NFC to connect to the LAN

The statement "A link to a page counts as a vote of a support" is NOT true about PageRank (PR) algorithms. PageRank assigns a value to a page based on the number and quality of incoming links, not on the number of links going out of a page.

PageRank is an algorithm used  to rank websites in their search engine results. It is named after Larry Page. PageRank is a way of measuring the importance of website pages. The significance of a page is determined by the number of other websites that link to it, as well as the quality of those websites.Below given are the following statements that are true about PageRank (PR) algorithms:A link to a page counts as a vote of support.The PR of each page depends on the PR of web pages pointing to it. The algorithm is iterative until a convergence is reached. PageRank works by tracking the number of links to a website's individual pages as well as the quality of the pages connecting to them.

Learn more about algorithms: https://brainly.com/question/24953880

#SPJ11

A transport layer protocol called User Datagram Protocol (UDP) offers a straightforward, connectionless communication service for sending datagrams across an IP network.

A transport layer protocol called User Datagram Protocol (UDP) offers a straightforward, connectionless communication service for sending datagrams across an IP network. Together with Transmission Control Protocol, it is one of the fundamental protocols of the Internet Protocol Suite (TCP). UDP, unlike TCP, does not include error detection and recovery techniques, flow control, or dependable, organised data transmission. Conversely, UDP places a premium on speed and efficiency, making it the protocol of choice for low-latency applications like DNS searches, streaming media, and online gaming. UDP is the best protocol to use in situations when speed is more crucial than data correctness and reliability because it is lightweight and has little overhead.

Learn more about User Datagram Protocol here:

https://brainly.com/question/20813972

#SPJ4

A data-type check is used to verify that the data in a specific field or column is of the correct type. In this case, the data-validation check for customer identification (ID) numbers requires that the IDs are eight characters and can contain numbers only.

Therefore, a data-type check will help identify customer ID errors that violate these requirements.Specifically, a data-type check will help identify customer IDs with text, as they do not meet the requirement of containing numbers only. Additionally, it will also help identify customer IDs with more than eight characters, as they violate the length requirement. However, a data-type check will not help identify IDs in the wrong column or IDs that are repeated, as these errors are related to data placement and duplication, respectively. a data-type check is a useful tool for identifying data errors related to data type and can help ensure the accuracy and consistency of customer identification data.

To learn more about customer identification click the link below:

brainly.com/question/14191786

#SPJ1

The two features of an Integrated Development Environment (IDE) that best allow a programmer to code faster and with less effort are: a. An IDE can autocomplete keywords and c. An IDE has a library of built-in functions.

Autocomplete of keywords: IDEs often have a feature that suggests and autocompletes keywords, function names, and variable names as the programmer types. This can save time and effort by reducing the need for manual typing and reducing the risk of typos or syntax errors.

Library of built-in functions: Many IDEs come with a library of pre-built functions that can be easily accessed and used in the code. This can save time and effort by reducing the need to write custom functions for common tasks and allowing the programmer to focus on the unique aspects of their code.

Learn more about  integrated development environment:https://brainly.com/question/29892470

#SPJ11

If you choose to initialize your Windows 10 hard drive as a dynamic disk, your disk will be divided up into a fixed storage configuration known as a "spanned volume".

A spanned volume is a type of disk configuration that combines multiple physical disks into a single logical volume. Data is written sequentially to each disk in the volume, and the total size of the spanned volume is equal to the sum of the capacities of all the disks in the volume.

Spanned volumes are useful for situations where you need to create a large volume but do not have a single disk with sufficient capacity. However, they do not provide any data redundancy, so if one disk in the spanned volume fails, all data on the volume may be lost.

You can learn more about spanned volume at

https://brainly.com/question/30031906

#SPJ11

The following would not result in the right monthly payment for a $13,000 loan with a 5-year repayment period and a 6% annual interest rate: PMT(6%, 60, -13000). The interest rate should be expressed as a monthly rate.

The complete question is:

Which of the following would not produce the correct monthly payment on a loan of $13,000 which will be paid off in 5 years with an annual interest rate of 6%?

A)=PMT(6%, 60, -13000)

B)=PMT(.5%, 60, -13000)

C)=PMT(.5%, 5*12, -13000)

D)=PMT(6%/12, 60, -13000)

To learn more about annual interest rate, refer to:

https://brainly.com/question/30500391