Answer:
This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse
Explanation:
hope its help you
Which of these micronutrients is destroyed by exposure to light?
A) riboflavin
B) iron
C) iodine
D) vitamin D
The micronutrient that is destroyed by exposure to light is riboflavin, also known as vitamin B2. The correct answer is option: a.
Riboflavin is a water-soluble vitamin that is important for energy production, cellular function, and growth. When exposed to light, riboflavin undergoes photo-oxidation, which causes it to break down and lose its activity. This is why many products that contain riboflavin, such as milk and other dairy products, are packaged in opaque containers to prevent exposure to light. Iron and iodine are not affected by light, while vitamin D is synthesized by the body in response to sunlight, rather than being destroyed by it. Option a is correct.
To know more about Riboflavin, here
brainly.com/question/13251994
#SPJ4
Atomic weight of Boron is 10.81 and it has 2 isotopes 5B10 and 5B11, then the ratio of 5B10:5B11 in nature would be 1. 15:16 2. 10:11 3. 19:81 4. 81:19
The atomic weight of Boron is 10.81 and it has two isotopes 5B10 and 5B11. The ratio of 5B10:5B11 in nature would be 10:11. Correct answer is option 2
The isotopes of an element have the same atomic number, indicating that they have the same number of protons in their nucleus, but a different atomic mass, indicating that they have a different number of neutrons in their nucleus. Because isotopes of an element have the same number of protons, they have almost identical chemical properties.
There are two isotopes of boron, 10B (which has an atomic mass of 10) and 11B (which has an atomic mass of 11). Boron has an atomic weight of 10.81. Therefore, the ratio of 5B10:5B11 in nature is calculated as follows:Atomic weight of Boron = Mass of 5B10 * abundance + Mass of 5B11 * abundance (10.81) = (10 * x) + (11 * y) [where x = abundance of 5B10 and y = abundance of 5B11]
Therefore, x + y = 1On solving the above two equations we get the abundance 5B10 as 0.199 and abundance of 5B11 as 0.801. The ratio of 5B10:5B11 in nature would be 10:11. Therefore, option 2. 10:11 is the correct answer.
Know more about isotopes here:
https://brainly.com/question/21536220
#SPJ11
which of the double bonds in zingiberene, the compound responsible for the aroma of ginger, is the most reactive in an electrophilic addition reaction with hbr ? zingiberene has the following line-angle formula: a ring with six vertices, with a double bond between the first and the second (clockwise) and between the third and the fourth vertices, a ch3 group attached to the second vertex, and a substituent attached to the fifth carbon by its first (from left to right) vertex. the substituent is a seven-membered chain consisting of a line terminus, a segment of five vertices, and a line terminus. there is another line segment with a single terminus (no vertices) coming from the fifth chain vertex. there is also a double bond between the fourth and the fifth chain vertices. identify the appropriate bond(s) by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. to do this, right-click on an atom and choose atom properties. (mac users: use an equivalent for right-clicking.) then, clear the check mark to enable the map field before entering a value.
The double bond between the fourth and fifth chain vertices in the zingiberene compound is the most reactive in an electrophilic addition reaction with HBr.
This double bond can be identified by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. To do this, right-click on an atom and choose atom properties (Mac users: use an equivalent for right-clicking). Then, clear the check mark to enable the map field before entering a value.
To learn more about "double bonds", visit: https://brainly.com/question/1004467
#SPJ11
a. Show the complete dissociation of perchloric acid.
b. Show the complete dissociation of cesium hydroxide.
c. Show the partial dissociation of ammonia by reacting it with water.
a. Perchloric acid is a strong acid and completely dissociates into hydrogen ions and perchlorate ions
b. Cesium hydroxide is a strong base and completely dissociates into cesium ions and hydroxide ions
c. Ammonia is a weak base and partially dissociates in water to form ammonium ions and hydroxide ions
a. Perchloric acid dissociates completely in water to form hydrogen ions and perchlorate ions:
HClO₄ (aq) → H⁺ (aq) + ClO₄⁻ (aq)
b. Cesium hydroxide dissociates completely in water to form cesium ions and hydroxide ions:
CsOH (aq) → Cs⁺ (aq) + OH⁻ (aq)
c. Ammonia reacts with water to form ammonium ions and hydroxide ions through partial dissociation:
NH₃ (aq) + H₂O (l) ⇌ NH₄⁺ (aq) + OH⁻ (aq)
In this reaction, some ammonia molecules remain intact while others donate a proton to a water molecule to form ammonium ions and hydroxide ions.
Learn more about complete dissociation here:
brainly.com/question/1408898
#SPJ11
Now suppose a reaction vessel is filled with 0.0406 atm of nitrogen (N_2) and 5.97 atm of ammonia (NH_3) at 1126. Degree C. Answer the following question this system: Under these conditions, will the pressure of N_2 tend to rise or fall? rise fall Is it possible to reverse this tendency by adding H_2? In other words, if you said the pressure of N_2 will tend to rise, can that be changed to a tendency to fall adding H_2? Similarly, if you said the pressure of N_2 will tend to fall, can that be changed to a tendency to rise by adding H_2? Yes no If you said the tendency can be reversed in the second question, calculate the minimum pressure of H_2 needed to reverse it. Round your answer to 2 significant digits. atm
The pressure of [tex]N_{2}[/tex] will rise under the given conditions. And, Yes, it is possible to reverse this tendency by adding [tex]H_{2}[/tex]. The minimum pressure of H2 required to reverse the tendency is 0.01 atm.
The reaction involved is: [tex]N_{2}[/tex](g) + 3[tex]H_{2}[/tex](g) ⇌ 2[tex]NH_{3}[/tex](g) Hence, when [tex]H_{2}[/tex] is added to the above system, the [tex]N_{2}[/tex] and [tex]H_{2}[/tex] will react to produce [tex]NH_{3}[/tex]. This reaction will reduce the amount of [tex]N_{2}[/tex] present in the system, causing the pressure of [tex]N_{2}[/tex] to decrease. Therefore, by adding [tex]H_{2}[/tex] , we can change the tendency of [tex]N_{2}[/tex] pressure from rise to fall.To calculate the minimum pressure of [tex]H_{2}[/tex] required to reverse the tendency, we have to use the equilibrium constant, Kp. The expression for Kp for the above reaction is: Kp =( [tex]NH_{3}[/tex]) / p([tex]N_{2}[/tex]) p3( [tex]H_{2}[/tex] )
At equilibrium, Kp = 1.7 × 104 at 1126 °C.Now, we will solve for the minimum pressure of [tex]H_{2}[/tex] needed to reverse the tendency. Let's assume that the pressure of [tex]N_{2}[/tex] has increased by x atm. Therefore, the new pressure of [tex]N_{2}[/tex] will be (0.0406 + x) atm. At equilibrium, we have:
p2([tex]NH_{3}[/tex] ) / p([tex]N_{2}[/tex]) p3( [tex]H_{2}[/tex] ) = 1.7 × 104
On substituting the given values and simplifying, we get:
p2([tex]NH_{3}[/tex]) / p(N2) = 6.39 × 10-5
Now, p2([tex]NH_{3}[/tex]) = 5.97 atm, and p([tex]N_{2}[/tex]) = (0.0406 + x) atm.
On substituting these values, we get:5.97 / (0.0406 + x) = 6.39 × 10-5
Solving for x, we get:x = 0.00579 atm ≈ 0.01 atm (rounded to 2 significant digits)Therefore, the minimum pressure of [tex]H_{2}[/tex] required to reverse the tendency is 0.01 atm.
More on equilibrium: https://brainly.com/question/30188799
#SPJ11
Indicate whether the molecule is chiral or achiral. CI Нішіне CI The molecule is: a. chiral b. achiral c. cannot be determined
The given molecule is chiral.
A chiral molecule is one that has a mirror image that is not superimposable on itself. If a molecule is superimposable on its mirror image, it is considered achiral. CI Нішіне is a molecule given to us. The structure of CI Нішіне is given below. It can be seen from the structure that the molecule has a central carbon atom (marked in blue) that is bonded to 4 different groups (chlorine, nitrogen, hydrogen, and another carbon atom).
Since it has four different groups bonded to it, it is a chiral molecule. Therefore, the given molecule is chiral.
For more questions on chiral
https://brainly.com/question/9522537
#SPJ11
According to avogadros law, how will the number of molecules in 2 liters of hydrogen gas compare with the number of molecules in 2 liters of oxygen gas at the same temperature and pressure?
A hydrogen will have more molecules in a volume of 2 liters
B oxygen will have more molecules in a volume of 2 liters
C they will have equal number of molecules
D there is no way to tell
Answer:
C - they will have equal number of molecules.
Explanation:
The number of molecules in 2 liters of hydrogen gas compare with the number of molecules in 2 liters of oxygen gas at the same temperature and pressure because while the equal volumes of the gases are at the same temperature and pressure, it still has the same number of molecules.
Arrange these samples in order of increasing mass: 2.5 mol Pb, 0.75 mol Au, 4.0 mol Mg, and 12 mol F.
The mass of one mole of a substance, which is equal to its atomic or molecular weight in grammes, is known as the molar mass.
What is 3.25 mol's mass?Now that the value has been applied, 3.25 moles have been provided. We will therefore obtain the molar mass after entering the values. This provides us with our answer, which is 318.5.
The following formula can be used to determine a sample's mass:
mass = molar mass × number of moles
Lead (Pb), gold (Au), magnesium (Mg), and fluorine (F) have the following molar masses:
Pb: 207.2 g/mol
Au: 196.9 g/mol
Mg: 24.3 g/mol
F: 18.998 g/mol
We can now determine the mass of each sample:
2.5 mol Pb: 2.5 mol × 207.2 g/mol = 518 g
0.75 mol Au: 0.75 mol × 196.9 g/mol = 147.7 g
4.0 mol Mg: 4.0 mol × 24.3 g/mol = 97.2 g
12 mol F: 12 mol × 18.998 g/mol = 227.98 g
As a result, the samples are sorted as follows, increasing in mass:
4.0 mol Mg (97.2 g)
0.75 mol Au (147.7 g)
2.5 mol Pb (518 g)
12 mol F (227.98 g)
To know more about molar mass visit:-
https://brainly.com/question/22997914
#SPJ1
draw the structure of the product of this fischer esterification reaction.
In general, Fischer esterification involves the reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst, to form an ester and water.
The general reaction that can be represented as follows:
Carboxylic acid + Alcohol ⇌ Ester + Water
The product of this reaction will depend on the specific carboxylic acid and alcohol used as reactants. The ester product will have a general structure of RCOOR', where R and R' are alkyl or aryl groups.
Therefore, the specific structure of the product cannot be determined without further information about the reactants used in the reaction.
To know more about Fischer esterification, here
brainly.com/question/31041190
#SPJ4
photosystem ii receives replacement electrons from molecules of
Photosystem II receives replacement electrons from molecules of water (H2O) during the light-dependent reactions of photosynthesis.
Photosystem II (PSII) is a protein complex found in the thylakoid membrane of chloroplasts in photosynthetic organisms. It plays a critical role in the light-dependent reactions of photosynthesis by harnessing energy from sunlight to split water molecules into oxygen, protons, and electrons. The replacement electrons for PSII are derived from the oxidation of water molecules. This process, known as photolysis, involves the transfer of electrons from water molecules to PSII, replenishing the electrons lost during light-dependent reactions. As a result, water is converted into oxygen gas, which is released into the atmosphere as a byproduct of photosynthesis.
In summary, molecules of water provide the replacement electrons required by PSII to maintain the flow of electrons during the light-dependent reactions of photosynthesis.
learn more about molecules of water here:
https://brainly.com/question/26529979
#SPJ4
In an experiment of the photoelectric effect, an incident beam of visible light shined on a piece of metal and produced electrons with zero kinetic energy (Case 1)1. Select ALL radiations that would produce electrons with some kinetic energy (Case I). bv tl hv Case 1: A photon has just enough energy to overcome the binding energy Case II: The excess energy of photon is transferred to the kinetic energy of the ejected electron. Infrared o x-ray Ultraviolet Gamma ray Radio
The correct options for the radiations that would produce electrons with some kinetic energy in an experiment of the photoelectric effect are given below: Infrared, Ultraviolet, X-ray, Gamma ray, and Photoelectric effect.
What is the photoelectric effect?The photoelectric effect is the emission of electrons when an external electromagnetic radiation falls on a metal surface. When the radiation falls on the surface of a metal, it produces the electrons with kinetic energy due to the transfer of excess energy of the photon to the ejected electron. The emission of electrons occurs when the external radiation falls on the metal surface, and the energy of the photon is greater than or equal to the work function of the metal.
When the energy of the photon is equal to the work function of the metal, the electrons are ejected with zero kinetic energy. However, when the energy of the photon is greater than the work function of the metal, the excess energy is transferred to the kinetic energy of the ejected electron, and it moves out with some kinetic energy. Thus, the radiations that would produce electrons with some kinetic energy in the photoelectric effect are infrared, ultraviolet, x-ray, and gamma rays.
Learn more about Photoelectric effect here:
https://brainly.com/question/9260704
#SPJ11
Fe2+(aq)+Zn(s)→Fe(s)+Zn2+(aq)E°cell=+0.32V
A galvanic cell generates a cell potential of +0.32V when operated under standard conditions according to the reaction above. Which of the following pairs of conditions are needed to construct a similar cell that generates the lowest cell potential?
A
[Zn2+]=0.5M and [Fe2+]=1M because Q<1.
B
[Zn2+]=1M and [Fe2+]=2M because Q>1.
C
[Zn2+]=2M and [Fe2+]=0.5M because Q>1.
D
[Zn2+]=2M and [Fe2+]=1M because Q<1.
The pairs of conditions that need to construct a similar cell that generates the lowest cell potential is [Zn2+]=0.5M and [Fe2+]=1M because Q<1. The correct answer is option A,
In order to construct a similar cell that generates the lowest cell potential, we need to consider the Nernst equation.
Where,
Ecell=E°cell − (0.0592/n) log Q
Where,
E°cell = Standard electrode potential
n = Number of electrons exchanged
Q = Reaction Quotient = [products]/[reactants]
For the given reaction, the cell potential is +0.32 V. This implies that under standard conditions, Q = 1.The answer to the given question is that [Zn2+] = 0.5 M and [Fe2+] = 1 M because Q < 1.
What are standard conditions?The conditions under which the standard electrode potential of a half-cell is measured are referred to as standard conditions. This usually entails a concentration of 1.00 mol/L for all substances, an atmospheric pressure of 1.00 atm, and a temperature of 25°C.
Learn more about Nernst equation here: https://brainly.com/question/15394851
#SPJ11
which one of the following salts, when dissolved in water, produces the solution with the highest ph?
a. LiClO4 b. KF c. KHSO4 d. Li3PO4 e. BaO.
The salt that produces the solution with the highest pH when dissolved in water is KF (Potassium Fluoride).The correct answer is b.
KF has a strong basic character and so it produces a highly basic solution. LiClO4 (Lithium Perchlorate), KHSO4 (Potassium Hydrogen Sulfate), Li3PO4 (Lithium Phosphate) and BaO (Barium Oxide) are all relatively weakly acidic and so produce solutions with lower pH.
The negative logarithm of the hydrogen ion concentration in a water-based solution is called pH. It represents the acidity or alkalinity of the solution. On a scale of 1 to 14, pH ranges from 0 to 14. The solutions with pH values less than 7 are acidic, those with pH values greater than 7 are alkaline, and those with pH values equal to 7 are neutral.
Salts are compounds made up of cations and anions that are ionically bonded. When they dissolve in water, they dissociate into their constituent ions. As a result, the pH of the solution may be affected. In the given salts, KF produces the solution with the highest pH when dissolved in water.
When dissolved in water, the pH of the solution is influenced by the salt.The negative logarithm of the hydrogen ion concentration in a water-based solution is called pH.pH represents the acidity or alkalinity of the solution.
Salts are compounds made up of cations and anions that are ionically bonded.KF produces the solution with the highest pH when dissolved in water.
Learn more about pH (potential of hydrogen) here:
brainly.com/question/12824293
#SMJ11
PLS HELP!!!
Match the terms to the appropriate definitions or descriptions
1. - c. Absolute dating
2. - k. Zircon
3. - m. Meteorites
4.- h. Compression melting
5. - e. Relative dating
6. - a. An igneous intrusion
7. - g. Unconformity
8. - d. Index fossils
9. - f. The Grand Canyon
10.- b. Iguazu Falls in Argentina
11. -h. Yosemite Valley
12.- i. Carbon 14 dating
13.-c. Radiometric dating
What is Carbon 14 dating?Carbon 14 dating, also known as radiocarbon dating, is a technique used to determine the age of organic materials based on their content of the radioactive isotope carbon-14. Carbon-14 is a naturally occurring isotope of carbon that is formed in the upper atmosphere by the interaction of cosmic rays with nitrogen atoms. This carbon-14 is incorporated into carbon dioxide molecules, which are then taken up by plants during photosynthesis and subsequently passed on to animals that eat those plants.
When an organism dies, it stops taking in carbon-14, and the carbon-14 in its tissues begins to decay into nitrogen-14 at a known rate. By measuring the amount of carbon-14 that remains in the sample, scientists can determine how long it has been since the organism died.
To know more about cosmic rays, visit:
https://brainly.com/question/13960192
#SPJ1
How would the pKa of the unknown acid be affected (higher, lower, or no change) if the following errors occurred? Please explain.
a) The pH meter was incorrectly calibrated to read lower than the actual pH.
b) During the titration several drops of NaOH missed the reaction beaker and fell onto the bench top.
c) Acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water.
Also, the same question, but if it says: How would the molar mass of the unknown acid be affected (higher, lower, or no change) if the following errors occurred? Please explain.
Same things that are asked in part a,b, and c.
The pKa will be higher in the unknown acid solution. The pH of the unknown acids would not be affected by several drops of NaOH solution.
What is pKa and pH of solution?The pKa of the unknown acid would be higher if the pH meter was incorrectly calibrated to read lower than the actual pH. This is because if the pH meter reads lower than the actual pH, the measured pH would be lower than the actual pH.
As pKa is the negative logarithm of the acid dissociation constant, Ka, which is directly proportional to the hydrogen ion concentration, [H⁺], a decrease in the measured pH would lead to a decrease in the measured [H⁺]. Since:
pKa = -log Ka = -log [H⁺] + log [HA], a decrease in [H⁺] would lead to an increase in pKa.
The pKa of the unknown acid would not be affected if several drops of NaOH missed the reaction beaker and fell onto the bench top. This is because the number of moles of NaOH that react with the unknown acid is not affected by the drops that miss the beaker.
The number of moles of NaOH that react with the unknown acid is determined by the volume and the concentration of NaOH added to the beaker and the volume and the concentration of the unknown acid in the beaker. Therefore, the pKa would remain the same.
The pKa of the unknown acid would not be affected if acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water. This is because the pKa of an acid is an intrinsic property that is independent of the amount of the acid. The pKa is determined by the acid itself, not by the amount of acid. Therefore, the pKa would remain the same.
Learn more about pH here:
https://brainly.com/question/31035487
#SPJ11
in a low pressure system wind moves in what direction
In a low pressure system, wind moves in a counterclockwise direction.
What is the effect of wind have in a low pressure system?The effect wind have in a low pressure system is the Coriolis effect, which is the apparent deflection of moving objects (including wind) caused by the rotation of the Earth.
In a low pressure system, air rises from the surface, creating a region of lower atmospheric pressure at the center of the system. The surrounding higher pressure air then flows inwards towards the center to replace the rising air, and is deflected to the right (in the Northern Hemisphere) or left (in the Southern Hemisphere) by the Coriolis effect, resulting in the counterclockwise or clockwise circulation.
Learn more about low pressure system at:
https://brainly.com/question/15301106
#SPJ1
fermentation functions in ______________ conditions.
Fermentation functions in anaerobic (oxygen-free) conditions.
What is fermentation?Fermentation is a metabolic process that occurs in the absence of oxygen (anaerobic conditions) and involves the breakdown of organic molecules such as glucose into simpler compounds. The process is carried out by microorganisms like yeast, bacteria, and some fungi.
During fermentation, the microorganisms involved convert carbohydrates (such as glucose) into energy without the use of oxygen. This process is called anaerobic respiration. The end products of fermentation can vary depending on the microorganism involved, but typically include alcohol, lactic acid, or other organic acids.
Fermentation is used in many industries, such as food and beverage production (e.g. beer, wine, bread, yogurt, and cheese), pharmaceuticals, and biofuels. In food production, fermentation is used to enhance flavor, texture, and nutritional value of foods. In biofuels production, fermentation is used to convert sugars into biofuels like ethanol.
Overall, fermentation is a vital process that occurs in anaerobic conditions and plays a significant role in various industries and in the metabolism of microorganisms.
Learn more about fermentation here:
https://brainly.com/question/490148
#SPJ1
predict what would happen to the pressure of a gas in a sealed container if you were to change the temperature. if you wanted to determine the functional relationship between pressure and the temperature of a gas, what variables would you have to keep constant?
The pressure of a gas in a sealed container can be affected if you change the temperature. The pressure would increase if you increase the temperature and decrease if you decrease the temperature. Therefore, it can be said that the pressure of a gas in a sealed container is directly proportional to its temperature.
What variables would you have to keep constant if you wanted to determine the functional relationship between pressure and the temperature of a gas?The variables that must be kept constant while determining the functional relationship between pressure and temperature of a gas are as follows:
Volume: The volume of a gas in a sealed container must be kept constant for accurate observations. It is because volume is also a factor that affects the pressure of a gas. If you increase the volume, the pressure will decrease and vice versa.Mass: It is also important to keep the mass of a gas constant. This is because the mass of a gas determines its density, which affects its pressure. Therefore, a gas with a higher mass will have a higher pressure as compared to a gas with a lower mass.Number of moles: If the number of moles of a gas is changed, it will affect the pressure of the gas. Therefore, the number of moles of a gas must also be kept constant for accurate observations.Thus, it can be concluded that the pressure of a gas in a sealed container is directly proportional to its temperature. To determine the functional relationship between pressure and temperature, variables such as volume, mass, and number of moles must be kept constant.
Learn more about variables: https://brainly.com/question/25223322
#SPJ11
what are the conditions under which a trust may face dissolution and also explain what happens to the assets of the trust upon its dissolution?
what are the conditions under which a Trust may face the solution and what happens to the assets of the trust upon its dissolution
A trust may be dissolved under a variety of circumstances, including the completion of its purpose, the agreement of all parties involved, or a court order. The trust assets are distributed upon dissolution in accordance with the terms of the trust instrument and applicable law. If the beneficiaries are named in the trust instrument, they receive the distribution. If the trust is silent or dissolved by a court, the assets are distributed in accordance with the applicable law's default rules. The distribution of trust assets can be a complicated legal matter, so it is best to seek the advice of an attorney who specialises in trust law.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document. Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs.
What are the conditions by which trust face dissolution ?A trust may face dissolution under certain conditions, including:
Termination date: A trust may be established with a specific termination date. When that date arrives, the trust will dissolve, and the assets will be distributed according to the terms of the trust.
Purpose fulfilled: A trust may be established for a specific purpose, such as funding education for a beneficiary. Once the purpose of the trust is fulfilled, the trust may dissolve.
Agreement among trustees and beneficiaries: If all parties involved in the trust, including the trustees and beneficiaries, agree to dissolve the trust, it may be terminated.
Court order: A court may order the dissolution of a trust if it is found to be illegal, impractical, or impossible to carry out the purpose of the trust.
When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document.
Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs. If the trust document does not specify how the assets are to be distributed, the trustee may use their discretion to distribute the assets in a fair and equitable manner.
Find more on trust agreement:
https://brainly.com/question/12258962
#SPJ2
Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols. chemical reaction? situation chemical equation A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. yes no A strip of solid iron metal O yes is put into a beaker of 0.051M PdC2 solution. O no
A chemical reaction occurs when the strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. The chemical equation for this reaction is: Pd (s) + Fe2+ (aq) + 4 SO4- (aq) → PdSO4 (s) + 2 Fe3+ (aq).
When the solid palladium metal comes into contact with the Feso4 solution, it dissociates into its ions.
The palladium ion, Pd2+, then reacts with the Fe2+ ion in the Feso4 solution to form the solid compound PdSO4 and the Fe3+ ion.
No reaction occurs when a strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. This is because the iron metal does not react with the PdC2 solution, so no chemical reaction takes place.
to know more about palladium refer here:
https://brainly.com/question/11112313#
#SPJ11
If a sample of radioactive isotopes takes 60 minutes to decay from 200 grams to 50 grams, what is the half-life of the isotope
The radioactive atom in this sample has a half-life of about 138.6 minutes.
The half-life of a radioactive isotope is the time required for half of the atoms in a sample to decay. The half-life of an isotope depends on its specific decay rate, which is determined by its nuclear properties.
In this case, the sample of radioactive isotopes decays from 200 grams to 50 grams over a period of 60 minutes. We can use this information to calculate the half-life of the isotope using the following equation:
N = N₀ x [tex](1/2)^(t/T)[/tex]
where N is the final amount of the isotope (50 grams), N₀ is the initial amount of the isotope (200 grams), t is the time elapsed (60 minutes), and T is the half-life of the isotope (in minutes).
Substituting the given values into the equation, we get:
50 = 200 x [tex]1/2^{(60/T)}[/tex]
Dividing both sides by 200 and taking the natural logarithm of both sides, we get:
ln(1/4) = -60/T
Solving for T, we get:
T = -60 / ln(1/4) ≈ 138.6 minutes
Therefore, the half-life of the radioactive isotope in this sample is approximately 138.6 minutes.
To learn more about isotopes refer to:
brainly.com/question/5357969
#SPJ4
phosphorylation of either of the terminal hydroxyl groups of glycerol will create: (a) (r)-glycerol-3-phosphate (b) l-glycerol-1-phosphate (c) d-glycerol-3-phosphate (d) a pair of enantiomers (e) none of the above
Phosphorylation of either of the terminal hydroxyl groups of glycerol will create b. L-glycerol-1-phosphate.
Glycolysis is a metabolic pathway in which glucose is broken down into two pyruvates in the presence of oxygen. Glycerol is a molecule that serves as a precursor to triacylglycerols and phospholipids. Glycerol, which is a 3-carbon molecule, is broken down into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate in the glycolysis pathway.
The structure of glycerol comprises of two terminal hydroxyl groups, -OH, on carbons 1 and 3 of glycerol are the primary alcohol groups. These groups can be phosphorylated by a kinase enzyme to produce two different phosphates: L-glycerol-1-phosphate or D-glycerol-3-phosphate.
Phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate. This molecule is a phosphoric acid ester of glycerol that is classified as a glycerophosphate. Phosphorylation of the 1-hydroxyl group produces L-glycerol-1-phosphate, whereas phosphorylation of the 3-hydroxyl group produces D-glycerol-3-phosphate.
Therefore, the phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate.
To know more about phosphorylation click here:
https://brainly.com/question/15585148
#SPJ11
Which of the following are end-products of glycolysis except?a. CO2CO2 and H2OH2Ob. Pyruvate, CO2CO2, and ATPc. Pyruvate, NADH, and ATPd. Acetyl CoA, CO2CO2, and NADHe. Citrate, H2OH2O, and FADH2
The anaerobic breakdown of glucose in these organisms results in the formation of lactic acid and ethanol, respectively.
Hence, option c. (Pyruvate, NADH, and ATP) is the correct answer.
Glycolysis is the process of breaking down glucose molecules into pyruvate, ATP, and NADH molecules.
Pyruvate and ATP are the end-products of glycolysis except for CO2.
Therefore, option B (Pyruvate, CO2, and ATP) is incorrect as CO2 is not the end product of glycolysis.
Thus, the correct option is c. (Pyruvate, NADH, and ATP) where Acetyl CoA, CO2, and NADH are not the end products of glycolysis.
The breakdown of glucose molecules during glycolysis results in the formation of two molecules of pyruvate, which is the end product.
In the presence of oxygen, pyruvate undergoes oxidative decarboxylation to produce Acetyl CoA, which enters the citric acid cycle.
The formation of NADH and ATP during glycolysis is the result of the oxidation of glucose to produce energy.
The NADH formed during glycolysis and other reactions enters the oxidative phosphorylation pathway, where the energy released is used to produce ATP.
The ATP produced during glycolysis is used for several cellular processes such as movement, metabolism, and division.
Glycolysis is the first step in the process of cellular respiration, and it occurs in the cytoplasm of all cells.
The process of glycolysis is essential for energy production in organisms that do not have access to oxygen, such as bacteria and yeast.
For similar question on glycolysis.
https://brainly.com/question/1966268
#SPJ11
What is the molar concentration (molarity) of a solution made by dissolving 0.340 moles of CaCl2 (s) in just enough water to form 1.7 liters of solution
a. 5.0 M b. 0.20 M c. 0.58 M d. 0.34 M
Option (b) is the correct answer. The molar concentration (molarity) of a solution made by dissolving 0.340 moles of CaCl₂ (s) in just enough water to form 1.7 liters of the solution is 0.20 M.
This can be determined using the formula:
Molarity = moles of solute/liters of solution.
In this case, 0.340 moles of CaCl₂ (s) is dissolved in 1.7 liters of solution, so the molarity is:
0.340 / 1.7 = 0.20 M.
Molarity is an important concept in chemistry. It is a measure of the number of moles of a substance dissolved in one liter of solution. In the case of this question, the molarity of the solution is 0.20 M, which means that there are 0.20 moles of CaCl₂ (s) dissolved in one liter of the solution.
In chemistry, molarity is often used to determine the concentration of a solution. The higher the molarity, the higher the concentration of the solute in the solution. For example, a 0.58 M solution of CaCl₂ (s) would be more concentrated than a 0.20 M solution.
To summarize, the molarity of the given solution is 0.20 M.
To know more about molarity, refer here:
https://brainly.com/question/8732513#
#SPJ11
knowing that solid sodium acetate is soluble and that acetic acid dissociates into hydrogen ions and acetate ions, why will sodium acetate influence the equilibrium of acetic acid dissociation?
As sodium acetate is added to the solution, the sodium ions (Na+) will replace the hydrogen ions (H+) in the equation. This causes a shift in the equilibrium as the number of hydrogen ions (H+) decreases, while the number of acetate ions (CH3COO-) increases.
Sodium acetate is an ionic compound composed of Na⁺ and CH₃COO⁻ ions.
It dissociates in water to create these ions, which are then available to affect the dissociation of acetic acid.
The equilibrium of acetic acid dissociation is influenced by the addition of sodium acetate.
Acid dissociation equilibria are influenced by salt addition (usually sodium salts), particularly when the acid is weak.
This is due to the fact that the anion of the salt reacts with hydrogen ions from the acid's dissociation.
This decreases the concentration of hydrogen ions in the solution, causing the reaction to shift towards more dissociation.
Learn more about acid dissociation constant here:
https://brainly.com/question/3006391
#SPJ11
In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page
The concentration of the acid used in titration is 0.05056 M
To determine the concentration of the acid, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the volume and concentration of the NaOH solution,
moles NaOH = concentration NaOH × volume NaOH
moles NaOH = 0.1 M × 12.640 mL / 1000 mL/L
moles NaOH = 0.001264 mol
Since the reaction between the acid and NaOH is 1:1, the number of moles of the acid is also 0.001264 mol. Calculate the concentration of the acid by dividing the number of moles by the volume of the acid used in the titration. Let's assume we used 25 mL of acid in the titration,
concentration acid = moles acid / volume acid
concentration acid = 0.001264 mol / 25 mL / 1000 mL/L
concentration acid = 0.05056 M
To know more about concentration, here
brainly.com/question/23160118
#SPJ4
--The complete question is, In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page. End point volume is 12.640 ml.--
Gold reacts with the elements in group 7 of the periodic table. 0. 175g of gold reacts with chlorine. The equation for the reaction is: 2Au+ 3Cl2 ------> 2AuCl3.
Calculate the mass of chlorine needed to react with 0. 175g of gold.
Give your answer in mg
Relative atomic masses(Ar): Cl=35. 5 Au=197
The mass of the chlorine needed to react with 0.175g of gold is 94.6mg. This is calculated with the help of Mole concept.
The mass of Au is 0.175g
The atomic mass of Au is 197g
Atomic mass of chlorine atom= 35.5 g
The number of moles of gold is calculated by the expression,
Number of moles= given mass/ molar mass
Putting all the values in the expression of moles we get,
number of moles of gold = 0.175 g/ 197 g/ mole
= 0.000888 mole
From the balanced equation 2Au + 3 → 2AuC, if 2 moles of gold readily react with 3 moles of Cl.
0.000888 moles of gold will react will be,
= 3/2 x 0.000888 x 35.5
Number of moles of Cl will be = 0.001332 moles
So, the mass of Cl that will react with Au is:
Mass of Cl = 0.01332 x 71
= 0.0946 g
we can convert the gram into milligram by multiplying 1000.
so it becomes, 0.0946 g x 1000= 94.6mg
To learn more about Moles
https://brainly.com/question/15356425
#SPJ4
What is the percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO3) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water?
The percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO₃) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water is 86.7%.
What is the percent yield of reaction?The balanced equation for the reaction is given as follows: WO₃ + 3H₂ ⟶ W + 3H₂O
From the balanced chemical equation, it can be seen that one mole of WO₃ reacts with three moles of H₂ to give one mole of W and three moles of H₂O.
The molecular weight of WO₃ is 231.84 g/mol, and the molecular weight of H₂O is 18.02 g/mol. The volume of H₂O is given in ml, so it needs to be converted to grams by multiplying it by its density, which is 1 g/ml. So, the theoretical yield of W can be calculated as follows: Number of moles of WO₃ = mass of WO₃/molecular weight of WO₃
Number of moles of WO₃ = 74.3 g / 231.84 g/mol = 0.32 mol
Number of moles of H₂ = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol
Number of moles of H₂O = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol
Mass of H₂O = volume of H₂O × density of H₂O = 7.38 mL × 1 g/mL= 7.38 g
The mass of W can be calculated using its atomic weight, which is 183.84 g/mol.
Mass of W = number of moles of W × atomic weight of W = 0.32 mol × 183.84 g/mol = 58.76 g
So, the theoretical yield of W is 58.76 g. The actual yield of W is not given, so it is assumed to be 50.97 g. Now, the percent yield can be calculated using the following formula: Percent yield = actual yield/theoretical yield × 100 = 50.97 g / 58.76 g × 100 = 86.7%.
Learn more about Percent yield here:
https://brainly.com/question/31082729
#SPJ11
write a list of rules for recognizing and naming binary molecular compounds from their chemical formulas
The following are the rules for recognizing and naming binary molecular compounds from their chemical formulas:
1. The first element in the chemical formula will be the name of the first element in the compound.
2. The second element in the chemical formula will be the name of the second element in the compound.
3. If the first element is a metal, the second element will end in “-ide”.
4. If the first element is a nonmetal, the second element will end in “-ate” or “-ite”.
5. The prefixes “mono-, di-, tri-, tetra-, penta-, and hexa-” are used to indicate the number of atoms of each element in the compound.
6. When the prefixes are not used, the number of atoms of each element is implied by the subscript.
7. If the subscript is written as a fraction, the fraction is changed to a whole number when forming the compound name.
Learn more about molecular compounds at brainly.com/question/30328923
#SPJ4
The rules for recognizing and naming binary molecular compounds are written focusing on the lower groups and the higher groups.
The rules for recognizing and naming binary molecular compounds from their chemical formulas are as follows:
1. The element with the lower group number is written first in the formula, and its full name is used.
2. The element with the higher group number is written second in the formula, and its stem name is used along with the suffix -ide.
3. The prefixes mono-, di-, tri-, tetra-, penta-, and so on are used to indicate the number of atoms present for each element in the molecule.
4. The prefix mono- is omitted for the first element in the formula.
5. The ending -a or -o in the prefix is omitted if the element name begins with a vowel, and only the vowel of the prefix is used in the compound name.
To learn more about compounds, click here:
https://brainly.com/question/26487468
#SPJ11
Based on the same principles as above, classify the radioactive decays as alpha emission, beta emission, or electron capture.Alpha emission:Beta Emission:Electron Capture:-40K19-218Po84-226Ra88
-234Th90
For the given radioactive decays: ₄₀K¹⁹: Beta emission ₂₁₈Po⁸⁴: Alpha emission ₂₂₆Ra⁸⁸: Electron capture. Alpha particles are helium nuclei (2 protons and 2 neutrons) emitted from some unstable nuclei of elements.
What are gamma rays?Gamma rays are a type of electromagnetic radiation, much like x-rays, visible light and radio waves. Gamma rays possess the highest frequency and the most energy of all types of electromagnetic radiation, and are created in the most extreme environments in the Universe. They are emitted from the nuclei of atoms some natural events such as supernovae, and can range from very low energies to the highest energies of all electromagnetic radiation. Gamma rays are used for in the medical field to diagnose and treat certain illnesses, however their high energy also makes them dangerous and harmful to living things.
Why Does Radioactive Decay Occur?Radioactive decay occurs when unstable atoms lose energy by emitting particles and/or radiation. Put simply, atoms become unstable and break apart to become more stable, and the process of releasing this energy is known as radioactive decay. Radioactive decay can be seen when certain elements spontaneously transform into other elements by emitting alpha particles, beta particles, or gamma radiation. Over time, these particles and/or radiation emitted cause the original atoms to become completely different elements.
To know more about alpha emission, visit:
https://brainly.com/question/28564218
#SPJ1