Generally, a literature review should aim to provide a comprehensive and up-to-date overview of the existing research and scholarly literature relevant to the research question or topic. This means that the number of studies or literatures included in a literature review will depend on factors such as the breadth and depth of the research question, the availability and relevance of existing research, and the scope of the research project.
It is important to ensure that the literature review is well-organized, critically analyzed, and clearly presented, regardless of the number of studies or literatures included. The focus should be on selecting high-quality and relevant sources, rather than simply aiming for a specific number of sources. A literature review should provide a thorough synthesis and analysis of the existing literature, and should demonstrate a clear understanding of the key debates, trends, and findings in the field.
The results of the gold foil experiment led to the conclusion that an atom is
1.
mostly empty space and has a small, negatively charged nucleus
2.
mostly empty space and has a small, positively charged nucleus
3.
a hard sphere and has a large, negatively charged nucleus
4.
a hard sphere and has large a large, positively charged nucbus
The results of the gold foil experiment led to the conclusion that an atom is mostly empty space and has a small, positively charged nucleus.
This was concluded by Ernest Rutherford, Hans Geiger, and Ernest Marsden through their gold foil experiment.
The Gold Foil Experiment was an experimental test conducted by Ernest Rutherford, Hans Geiger, and Ernest Marsden in which they bombarded alpha particles onto thin gold foils, expecting them to pass right through the gold foil. The team was astonished when the alpha particles were deflected back in all directions.
The results of the gold foil experiment led to the conclusion that an atom is mostly empty space and has a small, positively charged nucleus. Most of the alpha particles passed straight through the gold foil, indicating that the atom's mass was not evenly distributed but instead concentrated in a small, positively charged nucleus in the atom's center.
The Rutherford model, often known as the planetary model of the atom, was developed by Ernest Rutherford following the gold foil experiment. The model depicted the atom as a tiny, dense, and positively charged nucleus, with electrons orbiting the nucleus in the way that planets orbit a star.
For more such questions on atom, click on:
https://brainly.com/question/26952570
#SPJ11
Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols. chemical reaction? situation chemical equation A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. yes no A strip of solid iron metal O yes is put into a beaker of 0.051M PdC2 solution. O no
A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)A strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
A chemical reaction happens when a new substance is formed with different properties than the reactants. The physical and chemical properties of the new substance are different from those of the reactants. The chemical equation represents the chemical reaction.
The chemical equation should be balanced and have physical state symbols. A strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. Yes, a chemical reaction happens. The chemical equation for it is as follows: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)The balanced chemical equation is: Pd(s) + FeSO4(aq) → PdSO4(aq) + Fe(s)
The reactants are palladium metal and ferrous sulfate. The product is palladium sulfate and iron metal. The physical state of the reactants and products is as follows: Pd(s) - SolidFeSO4(aq) - AqueousPdSO4(aq) - AqueousFe(s) - SolidA strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. No, a chemical reaction does not happen.
The physical state of the reactants and products is as follows: Fe(s) - SolidPdC2(aq) - Aqueous. The reactants are iron metal and palladium dichloride. However, a chemical reaction does not happen.
To know more about chemical reaction, refer here:
https://brainly.com/question/31139804#
#SPJ11
the specific rotation of pure (-)-2-butanpl is -13.5. what % of a mixture of the two enantiomeric forms is the ( )-form from reaction
The percentage of the (+) enantiomer in the mixture is 55.6%
What are enantiomers?
Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.
Assuming that the two enantiomers are present in equal quantities (i.e., a racemic mixture), we can use the following equation to calculate the percentage of the (+)-enantiomer in the mixture:
% (+) = (observed specific rotation) / (specific rotation of pure enantiomer) x 100
In this case, we know that the specific rotation of pure (-)-2-butanol is -13.5. Let's assume that we have a racemic mixture of the two enantiomers, and we measure the observed specific rotation to be -7.5. Using the above equation, we get:
% (+) = (-7.5) / (-13.5) x 100 = 55.6%
Therefore, the percentage of the (+)-enantiomer in the mixture is 55.6%.
Learn more about enantiomers on:
https://brainly.com/question/29726886
#SPJ11
How many milliliters of 8.50×10−2 M NaOH are required to titrate each of the following solutions to the equivalence point?
A. 45.0 mL of 9.50×10−2 M HNO3
B. 30.0 mL of 8.50×10−2 M HC2H3O2 C. 55.0 mL of a solution that contains 1.85 g of HCl per liter
The volume of NaOH required is:(0.000914 mol NaOH) / (8.50×10−2 M NaOH) = 0.0108 L NaOH = 10.8 mL of NaOH is required.
Answer: 10.8 mL.
To determine the milliliters of 8.50×10−2 M NaOH required to titrate each of the following solutions to the equivalence point, use the following equations:
a) NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH is:(8.50×10−2 M)(V NaOH) = n NaOH
where V NaOH is the volume of NaOH solution.
b) NaOH(aq) + HC2H3O2(aq) → NaC2H3O2(aq) + H2O(l)
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH is:(8.50×10−2 M)(V NaOH) = n NaOHwhere V NaOH is the volume of NaOH solution.
c) HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
The number of moles of HCl is the product of the concentration and volume.
Hence, the number of moles of HCl is:(1.85 g/L HCl)(1 mol HCl/36.46 g HCl)(0.055 L HCl) = 0.000914 mol HCl
Molarity is defined as the number of moles of solute per liter of solution.
The concentration of NaOH is given as 8.50×10−2 M.
Therefore, the number of moles of NaOH required is:0.000914 mol HCl × (1 mol NaOH/1 mol HCl) = 0.000914 mol NaOH.
For similar question on titration.
https://brainly.com/question/13031875
#SPJ11
Oxidation of Alcohols: Practical Methods
1. a) State the reagents & conditions used in the oxidation of alcohols.
b) State the colour change observed for the oxidising agent.
2.a) Explain why oxidation of a primary alcohol under distillation produces an aldehyde whereas oxidation
under reflux produces a carboxylic acid. You could use ethanol oxidation as an example. Include
structural formulae in your explanation.
b) Which experimental set-up below would you use to:
i) oxidise ethanol to ethanoic acid?
ii) oxidise ethanol to ethanal?
2. For ea
drawin
a) ethanc
b) etha
c) pre
Answer:
1a) The most common reagents used for the oxidation of alcohols are potassium permanganate (KMnO4), chromic acid (H2CrO4), and potassium dichromate (K2Cr2O7). Other oxidizing agents include sodium hypochlorite (NaOCl), pyridinium chlorochromate (PCC), and Jones reagent (CrO3/H2SO4). The conditions vary depending on the reagent used, but generally, the reaction is carried out under acidic or basic conditions and at elevated temperatures.
b) The oxidizing agents generally have a distinctive color, and their color changes during the reaction. For example, potassium permanganate is purple in its initial state, but it turns brown when it is reduced. Similarly, potassium dichromate is orange, but it changes to green when it is reduced.
2a) When a primary alcohol is oxidized, it can produce either an aldehyde or a carboxylic acid, depending on the reaction conditions. When the oxidation is carried out under distillation conditions, the aldehyde is formed as the reaction intermediate, which is then distilled off before it can be further oxidized to a carboxylic acid. On the other hand, when the oxidation is carried out under reflux conditions, the aldehyde is in equilibrium with the carboxylic acid, and the carboxylic acid is formed as the major product. For example, when ethanol is oxidized using potassium dichromate in acidic conditions:
Under distillation conditions:
CH3CH2OH + [O] → CH3CHO + H2O
Under reflux conditions:
CH3CH2OH + 2[O] → CH3COOH + H2O
b) i) The experimental set-up to oxidize ethanol to ethanoic acid would involve refluxing ethanol with an excess of potassium dichromate in acidic conditions.
ii) The experimental set-up to oxidize ethanol to ethanal would involve distilling a mixture of ethanol and a limited amount of oxidizing agent, such as pyridinium chlorochromate or Jones reagent, at a temperature that is lower than the boiling point of ethanal.
See the attached image for the requested drawings of ethane, ethanol, and propanone.
(please could you kindly mark my answer as brainliest)
For these ions, write the correct symbol and charge
1.) rhenium (IV) ion
2.). iridium (IX) ion
3.)platinum (II) ion
4.)technetium (VII) ion
Rhenium (IV) ion is represented as Re4+.Iridium (IX) ion is not possible as the maximum possible element state for iridium is +VIII.Platinum (II) ion is represented as Pt2+. Technetium (VII) ion is represented as Tc7+.
Where is an ion's charge located?The net charge is expressed in superscript directly just after chemical structure of the molecule/atom in the chemical equation for just an ion. The doubly charge cation is denoted as 2+ rather than +2 because the size of the net charge was written before the sign.
How is a +2 ion created?A metal ion occurs whenever a metal gives up the outermost electrons to obtain a full octet. Calcium (Ca) will become a cation when it loses two electrons from of the outermost energy shell. There will be a +2 charge on it because it lost 2 electrons. With more protons than electrons, it has a positive charge (+2).
To know more about element visit:
https://brainly.com/question/14347616
#SPJ1
Calculate the root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C . Round your answer to 3 significant digits.
Root mean square (RMS) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴m/s.
The root mean square (rms) average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C can be calculated as follows:
Given data: Pressure, P = 0.17atm Temperature, T = -52°C = 221 K
Atomic weight of Neon, m = 20.18 g/mol = 20.18 × 10^-3 kg/molR = 8.314 J/mol KKB = R/NA = 1.38 × 10^-23 J/K (Boltzmann constant).
The root mean square (rms) velocity of gas is given by the equation:rms velocity, vrms = [3KB T/m]^1/2where, m = molar mass of gas, T = temperature, and KB = Boltzmann constant.
Substituting the given data, we get:v(rms) = [3KB T/m]^(1/2)v(rms) = [3KB T/m]^(1/2)v(rms) = [3 × (1.38 × 10^-23 J/K) × 221 K / (20.18 × 10^-3 kg/mol)]^(1/2)v(rms) = [4.981 × 10^-20 m^2/s^2]^(1/2) = 2.233 × 10⁻⁴ m/s.
Therefore, the RMS average speed of the atoms in a sample of neon gas at 0.17atm and −52.°C is 2.233 × 10⁻⁴ m/s (rounded off to 3 significant digits).
For more information about RMS average speed refer here
https://brainly.com/question/13095222?
#SPJ11
Duralumin is an alloy of aluminum (95%) and copper (5%). Could the technique used in this laboratory experiment to determine the percent copper also be used to determine the duralumin in a sample?
Yes, the technique used in this laboratory experiment to determine the percent copper can also be used to determine the duralumin in a sample. The same steps can be followed to measure the amount of aluminum and copper in the sample, then the percentages of each can be calculated.
Step 1: Measure out a sample of the duralumin.
Step 2: Heat the sample until it is completely melted.
Step 3: Separate the aluminum and copper in the melted sample.
Step 4: Weigh each of the separated elements, aluminum, and copper.
Step 5: Calculate the percentage of each element by dividing the weight of each element by the total weight of the sample.
Step 6: Add the percentages of aluminum and copper to determine the total percentage of duralumin in the sample.
to know more about alloy refer here:
https://brainly.com/question/30432755#
#SPJ11
Yes, the same technique used to determine the percent copper in a sample could be used to determine the amount of duralumin in a sample. Duralumin is an alloy of aluminum (95%) and copper (5%), so the same techniques used to measure the copper can also be used to measure the amount of duralumin.
Duralumin is an alloy of aluminum and copper. The technique used in this laboratory experiment can also be used to determine the duralumin in a sample.An alloy is a mixture of two or more metals that are typically combined to produce a metal that has more advantageous features than any single element.
For example, an alloy can have greater strength or be more resistant to corrosion than its constituent metals.In Duralumin, copper makes up only 5%, whereas aluminum makes up 95%. The technique used in this laboratory experiment can also be used to determine the duralumin in a sample.
Learn more about alloy here:
brainly.com/question/30432755
#SMJ11
calculate the mass of butane needed to produce 46.0 g of carbon dioxide.
A mass of 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
Mass of butane (g) = Mass of carbon dioxide (g) / Molecular mass of carbon dioxide (g/mol) x Molecular mass of butane (g/mol)
Mass of butane (g) = 46.0 g / 44.01 g/mol x 58.12 g/mol = 28.3 g
Therefore, 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
Butane has a molecular formula of C4H10 and is a hydrocarbon. Carbon dioxide has a molecular formula of CO2 and is composed of carbon and oxygen atoms.
When butane undergoes combustion, it reacts with oxygen from the atmosphere and forms carbon dioxide.
The reaction between the two molecules produces heat energy, which is why we measure the mass of butane needed to produce the desired amount of carbon dioxide.
This reaction can be represented by the following chemical equation:
C4H10 + 6O2 → 4CO2 + 5H2O + energy
Thus, the reaction between butane and oxygen produces carbon dioxide, water, and energy. This is why 28.3 g of butane is needed to produce 46.0 g of carbon dioxide.
to know more about butane refer here:
https://brainly.com/question/30325983#
#SPJ11
According to the kinetic molecular theory, the particles of an ideal gas
a. Have no potential energy
b. Have strong intermolecular forces
c. Are arranged in a regular, repeated geometric pattern
d. Are separated by great distances, compared to there size
According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.
A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.
According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.
To know more kinetic theory of gases, visit,
https://brainly.com/question/11067389
#SPJ4
PLEASE HELP ASAP!!!!!
The option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
The electron configuration for vanadium (V) is:
1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{6}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{3}[/tex]
For only the 3d sublevel, the configuration would be 3d3.
So, the option that has the correct electron configuration for vanadium is:
A. 1[tex]s^{2}[/tex] 2[tex]s^{2}[/tex] 2[tex]p^{4}[/tex] 3[tex]s^{2}[/tex] 3[tex]p^{6}[/tex] 4[tex]s^{2}[/tex] 3[tex]d^{5}[/tex]
What is an electron?
An electron is a subatomic particle that carries a negative electric charge. It is one of the fundamental particles that make up atoms, along with protons and neutrons. Electrons are found outside the nucleus of an atom in regions called shells or energy levels, and they are responsible for chemical bonding and the conduction of electricity.
What is vanadium?
Vanadium is a chemical element with the symbol V and atomic number 23. It is a hard, silvery-grey, ductile, and malleable transition metal that is found in various minerals and mineral ores. Vanadium has several important industrial uses, including as an alloying agent in steel and as a catalyst in the production of sulfuric acid. It is also used in the production of titanium alloys for aerospace and other high-performance applications, as well as in the manufacture of rechargeable batteries. Vanadium has biological functions in some organisms and is considered an essential trace element in the human diet.
To know more about vanadium, visit:
https://brainly.com/question/14247240
#SPJ1
What are the products and balanced equation for 2K(s) + ZnCl2(aq)
The products of the reaction between 2K(s) and ZnCl2(aq) are aqueous potassium chloride (KCl) and solid zinc (Zn), and the balanced chemical equation is 2K(s) + ZnCl2(aq) → 2KCl(aq) + Zn(s).
The balanced chemical equation for the reaction between 2K(s) and ZnCl2(aq) is:
2K(s) + ZnCl2(aq) → 2KCl(aq) + Zn(s)
In this reaction, potassium (K) reacts with zinc chloride (ZnCl2) to form potassium chloride (KCl) and solid zinc (Zn).
A balanced equation is a representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation. In other words, the total mass and charge of the reactants must be equal to the total mass and charge of the products. To balance an equation, one must adjust the coefficients in front of the chemical formulas of the reactants and products.
This is done by using the laws of conservation of mass and charge. For example, if there are two atoms of oxygen on one side of the equation, there must be two atoms of oxygen on the other side as well. A balanced equation is important because it provides a clear understanding of the stoichiometry of a chemical reaction. This information is crucial for determining the amounts of reactants needed to produce a certain amount of product, as well as for predicting the products of a given reaction.
To learn more about Balanced equation visit here:
brainly.com/question/12405075
#SPJ4
Which compound below will readily react with a solution of bromine resulting from a mixture of 48% hydrobromic acid and 30% hydrogen peroxide? a.Cyclohexene b.Dichlorometane c.Acetic acid d.t-Butyl alcohol e.Cyclohexane
The compound that will readily react with the solution of bromine resulting from the mixture of hydrobromic acid and hydrogen peroxide is option (a) Cyclohexene.
What is solution?A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture.
Free bromine (Br2), a potent electrophilic and oxidizing agent, can be produced in situ by mixing hydrobromic acid (HBr) and hydrogen peroxide (H2O2). So, we must choose a substance that Br2 can easily react with in these circumstances.
Cyclohexene, one of the provided compounds, is an unsaturated double-bonded molecule that can go through electrophilic addition processes. With alkenes like cyclohexene, bromine easily engages in an electrophilic addition process to generate a dibromoalkane.
Hence, option (a) cyclohexene is the substance that will most rapidly react with the bromine solution produced by the mixture of hydrobromic acid and hydrogen peroxide.
Learn more about mixtures on:
https://brainly.com/question/24647756
#SPJ11
In which of these gas-phase equilibria is the yield of products increased by increasing the total pressure on the reaction mixture? (A) CO(g) + H2O (8) CO2 (g) + H2(g) (B) 2NO(g) + Cl2 (g) + 2NOCI (8) (C) 250, (g) = 2502(g) + O2(g) (D) PCIs () PC13 (8) + Cl2 (8) 6. K, for the reaction of SO2 (g) with O2 to produce SO; (g) is 3 x 1024 Calculate K, for this reaction at 25°C. 2SO2 (g) + O2(g) 250 (8) (A) 3 x 1024 (B) 5 x 1021 (C) 2 x 1020 (D) 5 x 1022 (E) 7 x 102 7. The molar solubility of magnesium carbonate is 1.8 x 10 mol/L. What is Kp for this compound? (A) 1.8 x 10 (B) 3.6 x 10-4 (C) 1.3 x 10-7 (D) 3.2 x 10 (E) 2.8 x 10-14
The correct answer is (B) 2NO(g) + Cl2 (g) + 2NOCI (8). Increasing the total pressure on the reaction mixture will increase the yield of products. For the second question, the correct answer is (E) 7 x 102. Kp for the molar solubility of magnesium carbonate is 3.6 x 10-4.
Chemical equilibrium refers to the situation in a chemical reaction where both the reactants and products are present in concentrations that have no further tendency to change over time, preventing any discernible change in the system's properties. When the forward reaction and the reverse reaction go forward at the same speed, this condition results. The forward and backward reactions typically have equal, if not zero, reaction rates. The concentrations of the reactants and products do not change on a net basis as a result. Dynamic equilibrium is the name given to such a situation.
The reaction's Gibbs free energy, G, must be taken into account at constant temperature and pressure. The Helmholtz free energy, A, must be taken into account at constant temperature and volume. The reaction's entropy, S, must be taken into account at constant internal energy and volume.
In geochemistry and atmospheric chemistry, where pressure changes are considerable, the constant volume case is crucial.
It is thought about the case of constant pressure. By taking into account chemical potentials, the relationship between the Gibbs free energy and the equilibrium constant can be discovered.
The Gibbs free energy for the reaction, G, under constant temperature and pressure in the absence of an applied voltage, depends only on the degree of the reaction: (Greek letter xi), and can only decrease in accordance with the second law of thermodynamics. That indicates that if the reaction occurs, the derivative of G with respect to must be negative; at equilibrium, this derivative equals zero.
For more such questions on pressure , Visit:
https://brainly.com/question/24719118
#SPJ11
The motion of particles creates a heat energy. True or false
True. Thermal energy, which is quantified as heat, is the movement of particles inside a material. Particles exchange energy in the form of heat as they travel more quickly or collide with one another.
Hence, thermal energy may be produced by the movement of particles.
The movement of particles within a material results in the production of thermal energy, often known as heat energy. Kinetic energy, which occurs when particles travel more quickly, or potential energy, which occurs when particles vibrate more quickly, might cause this movement. As particles contact, heat is transferred from one particle to the next, and this energy transfer lasts until the substance reaches thermal equilibrium. The temperature and quantity of heat energy within the material increase with particle mobility. Understanding this concept is crucial for comprehending a variety of phenomena, such as heat transport, thermodynamics, and the behaviour of matter in different states.
learn more about Thermal energy here:
https://brainly.com/question/18989562
#SPJ4
JOHN NEWLANDS REASON OF FAILURE
Answer: The law was applicable only to calcium. It could not include other elements beyond calcium. With the discovery of rare gases, it was the ninth element and not the eighth element having similar chemical properties.
Explanation:
YOUR WELCOME
The materials or compounds converted into new compounds in a chemical reaction are known as
The materials or compounds that are converted into new compounds in a chemical reaction are known as reactants.
Reactants are the starting materials for a chemical reaction and are consumed or used up during the reaction to form new products. In a chemical equation, reactants are written on the left-hand side of the arrow and products are written on the right-hand side. The reactants in a chemical reaction can be solids, liquids, or gases, and can be composed of elements or compounds. Understanding the reactants and products involved in a chemical reaction is important in predicting the outcome of a reaction and determining the stoichiometry, or the relative amounts of each substance involved.
To know more about reactants click here:
brainly.com/question/13005466
#SPJ4
Consider the following system at equilibrium: N2 (g) + 3H2(g)--2NH3 (g) +92.94 kJ
Which changes cause it to shift to the right (products):
1) Increase in temperature 2) decrease in temperature 3)increase in volume 4) decrease in volume 5) remove some NH3 6) addsome NH3 7) remove some N2 8) add some N2
a) 1,4,6,7 b)2,3,5,8 c)1,6,8 d)1,3,5,7 e)2,4,5,8
The reaction above is exothermic, with the release of energy represented by the positive ΔH value.
Changes in temperature, pressure, and concentration can all cause the equilibrium to shift. In order to shift the reaction to the right-hand side (products), the following changes should be made: Increase in temperature: This reaction is exothermic, which means that increasing the temperature would cause the reaction to shift to the left and create more reactants. Lowering the temperature will cause the reaction to shift to the right and create more products. Decrease in volume: If the volume is decreased, the equilibrium shifts to the side with fewer moles of gas. Because the product side has fewer moles, the reaction will shift to the right, creating more products. Increase in NH3: Le Chatelier's principle indicates that when a substance is added to a system, the equilibrium will shift to decrease the concentration of that substance. As a result, the reaction will shift to the right and create more products. Removing N2: Because there are fewer reactants, removing N2 from the equation will cause the reaction to shift to the right and create more products.
Therefore, the answer is option (d) 1, 3, 5, 7: Increase in temperature, decrease in volume, remove some NH3 and remove some N2.
Learn more about equilibrium shifts at brainly.com/question/24188667
#SPJ11
examine the ungraded ball‑and‑stick model to determine the three‑dimensional structure of the molecule. on the corresponding 2d structure, draw one wedge bond and one dash bond over two existing bonds to indicate the same arrangement of atoms in space. the narrow part of each wedge‑and‑dash bond should be towards the same central carbon atom.
In geometry, a three dimensional form may be described as a solid figure or an item or shape that has three dimensions— length, breadth, and height.
What is dimensional structure?Two-dimensional structures are often composed of thin structured slabs of metals and dielectrics on a substrate and enable confinement along two dimensions in the plane transverse to the direction of propagation.
Proteins require a three-dimensional structure because they function as enzymes and cell building components. Proteins have a crucial role as structural elements in cells. Proteins have a set form to offer structure for cells, similar to how bricks have a definite shape to provide structure for our buildings.
Learn more about dimensional
https://brainly.com/question/27271392
#SPJ1
The answers are:
(S)-1-chloro-2,3-dimethylbutaneS configuration, which stands for counterclockwise priority sequence, is provided.Wedge for the methyl group and slash for the H group are placed at the second carbon.What is dimensional structure?Two-dimensional structures, which allow confinement along two dimensions in the plane perpendicular to the path of propagation, are frequently made of thin structured slabs of metals and dielectrics on a substrate.
The carbon on the left is assigned top priority because it is joined to a chlorine atom, which has a much higher molar mass than C and H.
2nd priority is given to the isopropyl group .
3rd priority is given to methyl group
4th priority is given to H.
To know more about dimethylbutane, visit:
https://brainly.com/question/30639612
#SPJ1
compared to the alkali metals, the alkaline-earth metals_____
Compared to the alkali metals, the alkaline-earth metals have higher melting and boiling points and have a smaller atomic radius.
Alkaline-earth metals are found in second group of the periodic table and have two valence electrons in their outermost shell. They have a lower reactivity than alkali metals because their outermost electrons are held more tightly due to their higher nuclear charge. The smaller atomic radius of the alkaline-earth metals also contributes to their increased reactivity compared to larger alkali metals. They tend to form ionic compounds with nonmetals due to their tendency to lose their two outermost electrons. They are important elements in many applications, including production of steel, aluminum alloys, in the extraction of metals from their ores.
To know more about Alkaline-earth metals, here
brainly.com/question/12835232
#SPJ4
how to calculate percent transmittance from absorbance?
Percent transmittance and absorbance are two measures of amount of light that passes through a sample of a solution. Absorbance is a logarithmic measure of the amount of light absorbed , while percent transmittance is the percentage of light that passes through it.
To calculate percent transmittance you can use: [tex]%T = 10^{(-A)} x 100[/tex]%T = 10^{(-A)} x 100
It is derived from relationship between absorbance and percent transmittance, which is described by the Beer-Lambert law. The law states that absorbance is directly proportional to the concentration of the absorbing substance in solution and path length of the light through the sample. Therefore, by measuring the absorbance of a sample and knowing the path length and concentration, you can calculate percent transmittance using the above formula.
To know more about Percent transmittance, here
brainly.com/question/12025463
#SPJ4
Suppose that an ethene molecule gains an additional electron to give the 2 C H-4 ion. Will the bond order of the carbon–carbon bond increase or decrease? Explain.
When an ethene molecule receives an extra electron to form the 2 C H-4 ion, the bond order of the carbon–carbon bond will decrease.
What is bond order?
Bond order is a formal way to quantify the number of covalent bonds that exist between two atoms in chemistry. Bond order is defined as the difference in the number of electron pairs in bonding and antibonding molecular orbitals, as stated by Linus Pauling in his introduction.
Ethene is a hydrocarbon that has two carbon atoms joined by a double bond. In ethene, the carbon-carbon bond order is 2. A bond order is the number of chemical bonds connecting a pair of atoms. Double bonds have a bond order of 2, whereas single bonds have a bond order of 1. Bond order has a significant impact on the stability and strength of the bond.
As a result, a change in bond order can have a significant impact on a molecule's physical and chemical properties.The bond order in the 2 C H-4 ion is calculated using the molecular formula: 2 C + H + 1 e-. Carbon has six electrons in its outermost shell, while hydrogen has one.
To achieve stability, carbon requires four more electrons, and hydrogen requires one more electron. The electron received is utilized to form a new carbon-hydrogen bond. As a result, there will be three single carbon-carbon bonds, and the bond order will decrease from two to 1.5. The bond strength between the two carbon atoms is also reduced. Therefore, the carbon-carbon bond will decrease in bond order when an ethene molecule gains an extra electron to form the 2 C H-4 ion.
Learn more about bond order on:
https://brainly.com/question/9713842
#SPJ11
the maximum solubility of salicylic acid in pure ethanol is 0.370 g/ml. the molal boiling point elevation constant, kb, for ethanol is 1.07 c/m. the density for ethanol is 0.789 g/ml. the boiling point for ethanol is 78.3 c. what is the maximum temperature change for a solution of salicylic acid in ethanol? show all calculations.
The maximum temperature change for a solution of the salicylic acid compound in ethanol is about 0.002292°C.
What is Maximum temperature change?To calculate the maximum temperature change for a solution of salicylic acid in ethanol, you need to use the boiling point elevation equation:
ΔT = Kb × m
where, Kb is the molal boiling point elevation constant, and m is the molality of the solution. The molality of the solution can be calculated using the following equation:
m = (mass of solute (g))/(1000 × molal mass (g/mol)*density of the solvent (g/mL))
Therefore, for the given equation:
m = (0.370 g)/(1000 × 137.1 g/mol × 0.789 g/mL) = 0.002181 mol/kg
ΔT = Kb × m = 1.07 c/m × 0.002181 mol/kg = 0.002292°C
Therefore, the maximum temperature change for a solution of salicylic acid in ethanol is 0.002292°C.
Learn more about Salicylic acid here:
https://brainly.com/question/14635153
#SPJ11
the doctors orders ampicillin 400mg iv every 6 hours. the drug comes in as powder in a vial. the directions state to add 3.5ml of diluent. the resulting solution contains 250mg ampicillin per milliliter. how many milliliters will you give?
1.6 mL of the ampicillin solution should be given every 6 hours as per the doctor's orders.
What is Drugs?
Drugs are substances that can be used to diagnose, treat, cure, or prevent disease, or to alleviate symptoms of disease. They can be natural or synthetic compounds, and they work by interacting with biological systems in the body to produce a therapeutic effect.
Drugs can be classified based on their pharmacological action, therapeutic use, chemical structure, or source. They can be administered in various forms, such as pills, capsules, injections, topical creams, or inhalers, and can be prescribed by licensed healthcare professionals.
The total dose of ampicillin required is 400 mg every 6 hours.
To prepare the solution, we need to add 3.5 mL of diluent to the vial containing the ampicillin powder. The resulting solution contains 250 mg of ampicillin per mL.
To determine how many milliliters of the solution to give, we can use the following equation:
Total dose of ampicillin required / concentration of ampicillin in solution = volume of solution to give
Substituting the values given:
400 mg / 250 mg/mL = 1.6 mL
Learn more about Drugs from given link
https://brainly.com/question/12646017
#SPJ1
Elemento de la aplicación de Visio que se usa para organizar formas en grupos visuales, siendo afectados también cuando sus formas o elementos se mueven, copian o eliminan
Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called Grouping.
"Grouping" is an essential feature in the Microsoft Visio application that allows users to organize shapes into visual groups. With this feature, users can select multiple shapes and group them together, making them behave as a single entity. When one shape in the group is moved, copied, or deleted, the other shapes in the group are also affected.
This feature is particularly useful when creating complex diagrams or flowcharts, as it allows users to manipulate multiple shapes as a single unit. Overall, "Grouping" in Visio is a simple but powerful tool that helps users to organize and manage their shapes and diagrams with ease.
To know more about Visio, here
brainly.com/question/28002074
#SPJ4
--The complete question is, Visio application element used to organize shapes into visual groups, also being affected when their shapes or elements are moved, copied, or deleted is called ________.--
2 PLS Question 2 Consider the chemical reaction: Fe3+ (aq)+ SCN (aq) Fe(SCN)2(aq) According to Le Chatelier's Principle, if the reaction is at equilibrium which of the following disturbance(s) will shift the reaction to the right? (There could be more than one correct answer, select all that are TRUE to receive credit) Increase the concentration of Fe3(aq) Decrease the concentration of Fe(SCN)2(aq) Increase the concentration of Fe(SCN)2(aq) Decrease the concentration of Feaq) Decrease the concentration of SCN () Increase the concentration of SCN'(),
The disturbances needed to shift the reaction to the right, according to Le Chatelier's Principle, are to increase the concentration of Fe3+ (aq), decrease the concentration of Fe(SCN)2 (aq), increase the concentration of SCN- (aq), and decrease the concentration of Fe(aq). Le Chatelier's Principle states that if a chemical reaction is at equilibrium, any disturbance that occurs in the reaction will be compensated by a shift in the equilibrium in the opposite direction so as to re-establish the equilibrium. In this case, the reaction is Fe3+ (aq) + SCN- (aq) = Fe(SCN)2 (aq).
In order to shift the reaction to the right (i.e. increase the amount of products) the following disturbances must occur: increase the concentration of Fe3+ (aq), decrease the concentration of Fe(SCN)2 (aq), increase the concentration of SCN- (aq), and decrease the concentration of Fe(aq). Any other disturbance will not have an effect on the reaction, as it is already at equilibrium
The rationale behind these disturbances is that they are all designed to increase the amount of reactants. An increase in the concentration of Fe3+ (aq) will provide more of the reactant needed to produce the product, while a decrease in the concentration of Fe(SCN)2 (aq) will reduce the amount of the product and thus drive the reaction towards the reactants.
Know more about Le Chatelier's Principle here:
https://brainly.com/question/29009512
#SPJ11
1 2 3 4 5 6 7 8 9 10 which statement best compares the melting point of butane (c4h10) with that of octane (c8h18)?the melting points of both substances are identical.the melting point is higher for butane.the melting point is higher for octane.the comparison of melting points cannot be made.
The comparison of melting points cannot be made is the best statement for the melting point of butane (C₄H₁₀) with that of octane (C₈H₁₈) because of the greater force of attraction and higher molecular weight.
What is melting point?The physical property of melting point can be defined as the temperature at which a solid substance is transformed into a liquid state. The greater the forces of attraction that exist between the molecules in a substance, the higher the melting point of the substance is.
Melting point comparison Butane (C₄H₁₀) and octane (C₈H₁₈) are both hydrocarbon chains. The molecular weight of octane is greater than that of butane. The melting point of a substance increases as its molecular weight increases. Because, octane has a greater molecular weight than butane, it has a higher melting point.
The comparison of melting points cannot be made between butane (C₄H₁₀) and octane (C₈H₁₈). Because the melting points of butane and octane cannot be compared, it is incorrect to state that the melting points of both substances are identical. Also, the melting point is not higher for butane since octane has a higher melting point due to its higher molecular weight.
Learn more about Melting point here:
https://brainly.com/question/29578567
#SPJ11
A 1.00 liter solution contains 0.32 M ammonia and 0.42 M ammonium iodide.
If 0.110 moles of calcium hydroxide are added to this system, indicate whether the following statements are true or false.
(Assume that the volume does not change upon the addition of calcium hydroxide.)
_______TrueFalse A. The number of moles of NH3 will increase.
_______TrueFalse B. The number of moles of NH4+ will increase.
_______TrueFalse C. The equilibrium concentration of H3O+ will decrease.
_______TrueFalse D. The pH will remain the same.
_______TrueFalse E. The ratio of [NH3] / [NH4+] will remain the same.
When 0.110 moles of calcium hydroxide are added to a solution containing 0.32 M ammonia and 0.42 M ammonium iodide, then statements B and C are True and statements A, D, and E are False.
A. The number of moles of NH₃ will increase. – False.
Adding calcium hydroxide to the system will not affect the amount of ammonia in the solution.
B. The number of moles of NH₄⁺ will increase. – True.
Adding calcium hydroxide will react with ammonium iodide, producing more ammonium ions in the solution.
C. The equilibrium concentration of H₃O⁺ will decrease. – True.
Adding calcium hydroxide will result in more hydroxide ions in the solution, thus decreasing the concentration of H₃O⁺.
D. The pH will remain the same. – False.
Adding calcium hydroxide will increase the number of hydroxide ions in the solution, thus increasing the pH.
E. The ratio of [NH₃]/[NH₄⁺] will remain the same. – False.
Adding calcium hydroxide will result in more ammonium ions in the solution, thus decreasing the ratio of [NH₃]/[NH₄⁺].
Therefore, statements B and C are true whereas statements A, D, and E are false.
To know more about ammonia, refer here:
https://brainly.com/question/14672082#
#SPJ11
Calculate the mass of a sphere of gold with a radius of 11.3 cm. (The volume of a sphere with a radius r is V = (4/3)πr3; the density of gold is 19.3 g/cm3.) Express the solution in grams and in scientific notation.
The mass of a sphere with a radius of 11.3 cm can be calculated using the equation M = V × ρ, where V is the volume of the sphere and ρ is the density of the material. The volume of a sphere with a radius r is V = (4/3)πr3 and the density of gold is 19.3 g/cm3, so we can calculate the mass of the gold sphere as:
M = (4/3)πr3 × 19.3 g/cm3 = (4/3) × 3.14 × 11.33 × 19.3 g/cm3
M = 8,683.29 g = 8.7 × 103 g (in scientific notation)
Read more about the topic of density:
https://brainly.com/question/1354972
#SPJ11
Why electrons move from negative terminal of battery?
Answer:
Electrons are negatively charged, and so are attracted to the positive end of a battery and repelled by negative end.
Explanation: