Answer:
oxygen friend
Explanation:
It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.
Do you think the offspring of the hydra and the salamander are genetically identical or not genetically identical to the parents? Support your argument with evidence.
identify the phrases that generally apply to molecular compounds.
a. contain metals and nonmetals
b.are often gases or liquids
c. have low melting points
d.contain ionic bonds
e. use covalent bonding
The phrases that applied to molecular compounds are often gases and liquids, which have low melting points and and use covalent bonding. So. options (b), (c) and (e) are correct.
Molecular compounds are defined as the chemical compounds that take the form of discrete molecules. The molecular compounds are very different from ionic compounds like sodium chloride. These compounds are held together by covalent bonds. Molecular compounds are usually gases and liquids at room temperature due to their low melting and boiling points. Some molecular compounds are solids at room temperature but they tend to be soft and flexible. The boiling points of these compounds are also low due to weak intermolecular forces because it does not take that much energy to separate and vaporize the molecular molecules.
To learn more about Molecular compounds
https://brainly.com/question/14018732
#SPJ4
what is the ph at the equivalence point in the titration of a 23.4 ml sample of a 0.427 m aqueous nitrous acid solution with a 0.494 m aqueous potassium hydroxide solution?
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00.
What is titration?Titration is a chemical analysis method that measures the amount of a chemical compound in a solution by using a standard solution (a solution of known concentration).
Titration can be used to determine the concentration of an unknown solution, the quantity of a particular substance in a sample, or the identity of a substance. Titration is frequently utilized in chemistry labs to test acid or base solutions' strength.
Titration calculations involve the use of formulas that relate the concentration of the standard solution to the concentration of the unknown solution. Acid-base titration, which measures the concentration of an acidic or basic solution, is one of the most popular types of titration.
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00 because nitrous acid (HNO2) is a weak acid with a Ka value of 4.5 x 10-4. At the equivalence point, the quantity of moles of the potassium hydroxide solution added is equal to the quantity of moles of the nitrous acid solution. The pH of the solution is determined by the salt produced during the titration's neutralization reaction.
The salt produced during this titration is potassium nitrite (KNO2), which is a salt of a strong base and a weak acid. When dissolved in water, potassium nitrite undergoes hydrolysis and produces a solution with a pH of about 7.00. As a result, at the equivalence point, the pH of the solution is 7.00.
Learn more about titration: https://brainly.com/question/186765
#SPJ11
in the planet x of the z constellation, the martian found two isotopes of an element that he named m, 79m and 81m, whose masses (78.9183 and 80.9163 amu) and abundances (50.69% and 49.31%) were determined in earlier experiments. calculate the average atomic mass of m.
The average atomic mass of m is 79.90 amu.
The average atomic mass of m is given by the formula below:
The average atomic mass of m= [(Abundance of 79m * Mass of 79m) + (Abundance of 81m * Mass of 81m)]/100
Average atomic mass of m = [(50.69% * 78.9183 amu) + (49.31% * 80.9163 amu)]/100
The average atomic mass of m = [(0.5069 * 78.9183) + (0.4931 * 80.9163)]/100
The average atomic mass of m = 79.90 amu
Therefore, the average atomic mass of m is found to be 79.90 amu.
To learn more about isotopes refer - https://brainly.com/question/24873591
#SPJ11
Suppose a single photon strikes an electron in some material, knocking it out of its atom. Which of the following statements are true concerning the scattered photon?Check all that apply:The scattered photon has greater energy than the incident photon.The scattered photon has a shorter wavelength than the incident photon.The scattered photon has a longer wavelength than the incident photon.The scattered photon has less energy than the incident photon.
The correct statements are as follows: "The scattered photon has less energy than the incident photon" and "The scattered photon has a longer wavelength than the incident photon."
"The scattered photon has greater energy than the incident photon": This statement is incorrect because, during the Compton scattering process, the scattered photon loses energy. As a result, its energy is less than the energy of the incident photon.
"The scattered photon has a shorter wavelength than the incident photon": This statement is incorrect because, during the Compton scattering process, the scattered photon has a longer wavelength than the incident photon.
The wavelength of the scattered photon is longer due to the loss of energy during the scattering process.
"The scattered photon has a longer wavelength than the incident photon": This statement is correct because, during the Compton scattering process, the scattered photon has a longer wavelength than the incident photon.
The wavelength of the scattered photon is longer due to the loss of energy during the scattering process.
"The scattered photon has less energy than the incident photon": This statement is correct because, during the Compton scattering process, the scattered photon loses energy.
As a result, its energy is less than the energy of the incident photon.
Learn more about photon: https://brainly.com/question/25746629
#SPJ11
How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.
Answer: Both processes produce waste.
A tractor pulls a wagon at a constant velocity for 1500 m while exerting a force of 600 N
Calculate the work done (in joules). Show your work
Answer:
900000 joules (J).
Explanation:
The work done by a force on an object is given by the product of the force and the displacement of the object in the direction of the force. In this case, the force exerted by the tractor is 600 N, and the displacement of the wagon is 1500 m in the direction of the force.
Therefore, the work done by the tractor on the wagon is:
work = force x displacement x cos(theta)
where theta is the angle between the force and the displacement vectors. Since the force and displacement are in the same direction, theta is 0 degrees, and cos(theta) is equal to 1.
So, the work done by the tractor is:
work = 600 N x 1500 m x 1
= 900000 J
Therefore, the work done by the tractor on the wagon is 900000 joules (J).
he structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbusterFDA-approved drug. Propose a synthesis of this compound using tryptophan as a startingmaterial.NHNN
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt.
The structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbuster FDA-approved drug. To propose a synthesis of this compound using tryptophan as a starting material, we need to understand the chemical structure of the compound.
The structure of the compound contains two nitrogen atoms, one hydrogen atom, and two nitrogen-hydrogen bonds (NHNN). The starting material, tryptophan, contains a ring structure with an indole group, two nitrogen atoms, and four carbon atoms.
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt. This salt can then be reacted with a Lewis acid to form a substituted Indolium ion. The Indolium ion can be reacted with a nucleophile such as hydrazine to form an oxazolidinone intermediate.
Finally, a ring closure of the oxazolidinone intermediate can yield the desired compound.
Learn more about tryptophan https://brainly.com/question/15204421
#SPJ11
The chemical formula Al2SiO5 can form any of these three minerals, given different combinations of temperature and pressure conditions: a. marble, quartzite, and hornfels b. quartz, feldspar, and mica c. hematite, magnetite, and goethite d. andalusite, kyanite, and sillimanite e. granite, sandstone, and marble
The chemical formula [tex]Al_2SiO_5[/tex] can form the three minerals, andalusite, kyanite, and sillimanite under different combinations of temperature and pressure conditions. Option D is correct.
What are minerals? Minerals are solid inorganic materials with a specific chemical formula and crystalline structure. Most minerals are naturally occurring substances. Some minerals are silicates, while others are carbonates, oxides, sulfides, or halides, among other groups.What is the chemical formula? The chemical formula refers to the formula that represents the atoms in a compound's molecule. The chemical formula of a mineral is a shorthand description of the relative proportions of a mineral's primary chemical constituents. [tex]Al_2SiO_5[/tex] is a chemical formula. It means that for every two aluminum atoms, there is one silicon atom, and five oxygen atoms in a mineral.What is the significance of temperature and pressure in mineral formation? Temperature and pressure are essential factors in mineral formation. A mineral can only form under certain temperature and pressure conditions. Because the temperature and pressure conditions vary depending on the type of mineral, each mineral has unique characteristics. The pressure and temperature requirements for the formation of some minerals are so unique that they can only form under extreme conditions.The chemical formula [tex]Al_2SiO_5[/tex] can form andalusite, kyanite, and sillimanite under different combinations of temperature and pressure conditions. Hence, option D is correct.Learn more about the chemical formula: https://brainly.com/question/11574373
#SPJ11
Emma prepared two glasses of water at two different temperatures. She added a spoonful of table salt to the cold water in glass #1 and spoonful of rock salt to the hot water in glass #2. She observed that the spoonful of table salt in glass #1 dissolved faster than the spoonful of rock salt in glass #2. Based on this observation, Emma concluded that salt dissolves faster in cold water than in hot water.
What question was Emma trying to investigate in her experiment?
Are table salt and rock salt soluble or insoluble in cold and hot water without stirring?
Does surface area affect the rate of dissolving of a substance in water?
Does temperature affect the rate of dissolving of a substance in water?
What type of salt dissolves faster in water when stirred at different temperatures?
Answer: Does temperature affect the rate of dissolving a substance in water?
PLEASE HELP ASAP 100 POINTS
Score
The Russian Mir space station used a chemical oxygen generator system to make oxygen for the crew. The
system ignited a tube of solid lithium perchlorate (LICIO4) to make oxygen and lithium chloride (LICI):
LICIO4 (s) → 202 (g) + LiCl (s)
If you have 500 g of LICIO4, then how many liters of oxygen will the system make at the station's standard
operating conditions, a pressure of 101.5 kPa and a temperature of 21°C? (Show the steps involved in your work)
To solve this problem, we need to use the ideal gas law, which relates the pressure, volume, and temperature of a gas to the number of moles of gas present. We can use the balanced chemical equation to determine the number of moles of oxygen produced by the reaction of LICIO4.
The molar mass of LICIO4 is:
LICIO4: Li = 1 x 1 = 1 g/mol, I = 127 g/mol, O4 = 4 x 16 = 64 g/mol
Total molar mass = 1 + 127 + 64 = 192 g/mol
So, 500 g of LICIO4 is equal to:
500 g / 192 g/mol = 2.604 moles of LICIO4
From the balanced chemical equation, we see that for every mole of LICIO4, two moles of oxygen are produced:
1 mol LICIO4 → 2 mol O2
Therefore, 2.604 moles of LICIO4 will produce:
2.604 moles x 2 mol O2/1 mol LICIO4 = 5.208 moles of O2
Now we can use the ideal gas law to calculate the volume of oxygen produced at the given temperature and pressure:
PV = nRT
where P is the pressure (101.5 kPa), V is the volume we want to find, n is the number of moles of oxygen (5.208 moles), R is the ideal gas constant (8.314 J/mol K), and T is the temperature in Kelvin (21°C + 273 = 294 K).
V = (nRT)/P
V = (5.208 mol x 8.314 J/mol K x 294 K)/101.5 kPa
Converting kPa to Pa, we get:
V = (5.208 mol x 8.314 J/mol K x 294 K)/(101.5 x 1000 Pa)
V = 101.92 m3 or 101,920 L
Therefore, the system would produce approximately 101,920 liters of oxygen at the station's standard operating conditions.
Think about how you would expect the temperatures in the star to vary between each of the layers shown, and use this to sort the following elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
Helium - Carbon - Oxygen - Hydrogen - Neon - Sulfur
The correct order of the elements will be Hydrogen, Helium, Neon, Oxygen, Carbon, Sulfur.
What is nuclear fusion?
A reaction known as nuclear fusion occurs when two or more atomic nuclei fuse to create new atomic and subatomic particles. Energy is released or absorbed depending on how much mass there is between the reactants and products.
The temperature inside a star fluctuates depending on the layers in which nuclear fusion reactions occur. In this problem, students are asked to sort the given elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
To do so, it is necessary to determine the order in which the layers of the star are located. This can be accomplished by considering the temperature required for nuclear fusion to take place in each layer. The following is a list of elements arranged in order of increasing temperature required for nuclear fusion:
Hydrogen - Helium - Neon - Oxygen - Carbon - Sulfur.
Learn more about nuclear fusion on:
https://brainly.com/question/17870368
#SPJ11
What are the 5 chemical bonds?
There are five chemical bonds that you can learn about in chemistry. These chemical bonds include: Covalent bond, Ionic bond, Polar covalent bond, Metallic bond, and Hydrogen bond.
Covalent bond: It is the bond formed by sharing electrons between two atoms. It is one of the most powerful chemical bonds that holds molecules together. This bond can be formed between atoms of the same or different elements.
Ionic bond: It is the bond formed by the transfer of electrons from one atom to another. This bond is formed between metals and non-metals.
Polar covalent bond: It is the bond formed between two atoms that have different electronegativity values. The electrons in this bond are shared unequally between the two atoms. This bond is intermediate between the covalent and ionic bond.
Metallic bond: It is the bond formed between metal atoms. In this bond, electrons move freely between metal atoms.
Hydrogen bond: It is the bond formed between a hydrogen atom and an electronegative atom. This bond is responsible for many of the unique properties of water.
Learn more about Chemical bonds here:
https://brainly.com/question/12907148
#SPJ11
Which of the following are thought to be key requirements for a world to have life?- a source of energy to fuel metabolism- a source of molecules from which to build living cells- a liquid medium
The following are thought to be key requirements for a world to have life: A source of energy to fuel metabolism, A source of molecules from which to build living cells, A liquid medium, These are the primary requirements for a world to have life. These requirements are key to the development and sustainability of life on Earth.
Every living organism requires energy to survive, and this energy comes from a variety of sources, including sunlight, food, or chemical reactions. It's necessary to have a source of energy to fuel metabolism, as it helps with the growth, development, and reproduction of an organism. A source of molecules from which to build living cells
These molecules can include things like amino acids, sugars, and lipids. A liquid medium is essential for life because it provides an environment in which chemical reactions can occur. Most chemical reactions require water to proceed, and water is also the medium in which cells operate. This is why water is considered to be the universal solvent and is an essential component for life on Earth.
Know more about reproduction here:
https://brainly.com/question/11856893
#SPJ11
Use the Ideal Gas Law equation to find the molar mass of a 98. 2 g sample of gas that fills a 50. 0-liter container at STP.
Multiple choice question.
A)
32. 0 g/mol
B)
44. 0 g/mol
C)
4. 00 g/mol
D)
1. 48 g/mol
Using the Ideal Gas Law equation, the molar mass of a 98. 2 g sample of gas that fills a 50. 0-liter container at STP is 48 g/mol
The correct answer is option D.
The Ideal Gas Law is PV=nRT, where P is pressure, V is volume, n is the number of moles of the gas, R is the ideal gas constant and T is temperature.
According to the Ideal Gas Law equation to find the molar mass of a 98.2 g sample of gas that fills a 50.0-liter container at STP is given by:
It is not clear which gas is present in the container, but since the temperature and pressure are fixed (standard pressure and temperature), we can assume that this gas is an ideal gas.
We can use the ideal gas law to calculate the number of moles of this gas:
PV=nRT
⟹n=PV/RT
=1.00 atm×50.0 L/0.0821 L·atm/mol·K×273 K
=1.96 mol
Since we know the mass of this gas, we can now calculate its molar mass:
M=mass/number of moles
=98.2 g/1.96 mol=48 g/mol
So the molar mass of the given gas is 48 g/mol.
For more such questions on Ideal Gas Law, click on:
https://brainly.com/question/4147359
#SPJ11
How many moles of fe3o4 can be produced when 12. 00 mol fe react with 6. 00 mol o2?
When the 12. 00 mol Iron react with 6.00 mol O2 then 4.00 mol of Fe3O4 can be produced.
In order to know how many moles of Fe3O4 can be produced from the reaction of 12.00 mol Fe with 6.00 mol O2, we first need to get balance the chemical equation for the reaction:
4 Fe + 3 O2 -----> 2 Fe3O4
From the balanced equation, we can see that for every 4 moles of Fe that react, we need 3 moles of O2. Therefore, the limiting reactant in this case is O2, since we only have 6.00 mol available, while we need 8.00 mol to react with all 12.00 mol of Fe. This means that Fe will be in excess and we can calculate the amount of Fe3O4 produced based on the amount of O2 that reacts.
To do this, we can use the mole ratio from the balanced equation:
3 mol O2 --------> 2 mol Fe3O4
So, for every 3 moles of oxygen that react, we can produce 2 moles of Fe3O4. Since we have 6.00 mol of O2, we can obtain the moles of Fe3O4 produced as follows:
6.00 mol O2 x (2 mol Fe3O4 / 3 mol O2) = 4.00 mol Fe3O4
Therefore, it can be concluded that 4.00 mol of Fe3O4 can be produced when 12.00 mol Iron reacts with 6.00 mol O2.
Learn more Molarity :
https://brainly.com/question/15948514
#SPJ4
Which hydrocarbon has all of its atoms in the same plane?A) C2H6B) CH4C) C2H4D) C3H4
The hydrocarbon that has all of its atoms in the same plane is C2H4. The correct answer is option: C .
This is because C2H4 has a planar structure due to its sp2 hybridization of carbon atoms, which allows the molecule to have a trigonal planar geometry. In contrast, C2H6, also known as ethane, has a tetrahedral shape due to the sp3 hybridization of its carbon atoms, which results in the atoms not being in the same plane. CH4, it has a similar tetrahedral shape for the same reason. C3H4, also known as propyne, has a linear shape due to the triple bond between the carbon atoms, but the atoms are not all in the same plane. Option C is correct.
To know more about hydrocarbon, here
brainly.com/question/17578846
#SPJ4
the diagram represents the reaction of hydrogen gas and oxygen gas to produce water. which statement best describes the reaction? (1 point) responses more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. skip to navigation
The reaction of hydrogen gas and oxygen gas to produce water is an exothermic reaction because more energy is released in the formation of the products than is needed to break the bonds of the reactants.
In other words, more energy is released when the hydrogen and oxygen molecules combine to form water molecules than is needed to break the bonds between the hydrogen and oxygen molecules.
Exothermic reaction- It is a type of reaction in which the two atoms react with each other to form a stable compound and release energy in the process of doing so.
To learn more about "reaction", visit: https://brainly.com/question/11231920
#SPJ11
1. PART A: Which TWO of the following best identify the main ideas of this article?
Fingerprints are still the most accurate way to identify a person.
Blood vessels have the same structure as fingerprints.
Biometric features are slightly different in everyone.
Biometrics is the measurement of life.
A
B.
C.
D.
E.
F.
Biometric technology can help in areas of security, privacy, and health.
Children in West Africa desperately need vaccines.
The statement that best identify the main idea of the article are, A and C
A) Fingerprints are still the most accurate way to identify a person.
C) Biometric features are slightly different in everyone.
What is the article about?The article seems to focus on biometric technology and the different ways it can be used for identification, security, and health purposes.
It explains that fingerprints remain the most accurate way to identify a person, but also discusses the unique features of other biometric identifiers such as facial recognition and blood vessels.
Lastly, the article emphasizes the importance of recognizing that biometric features are unique to each individual.
Learn more about biometric technology from
https://brainly.com/question/20643575
#SPJ1
Acetylene gas (C2H2) is used in welding torches. When it reacts with oxygen, it produces carbon dioxide (CO2) and steam (H2O). The reaction can be described by the equation: 2C2H2 + 5O2 = 4CO2 + 2H2O. How much mass of C2H2 is needed to react with 68. 1g of O2 to produce 75. 0g of CO2 and 15. 35g of steam
22.15 g of C2H2 is required to react with 68.1 g of O2 to produce 75.0 g of CO2 and 15.35 g of H2O.
Amount of CO2 produced = 75.0 g
Amount of H2O produced = 15.35 g
From the chemical equation, we can see that 2 moles of C2H2 react with 5 moles of O2 to produce 4 moles of CO2 and 2 moles of H2O. Therefore, the mole ratio of C2H2 to O2 is 2:5.
We can use this ratio to calculate the amount of C2H2 required to react with 68.1 g of O2:
Amount of O2 = 68.1 g
Molar mass of O2 = 32.00 g/mol
Number of moles of O2 = [tex]\frac{amount}{molar mass} = \frac{68.1 g}{32.00 g/mol} =2.128 mol[/tex]
According to the mole ratio, the amount of C2H2 required is:
Number of moles of C2H2 = (2/5) x 2.128 mol = 0.8512 mol
Finally, we can convert the number of moles of C2H2 to grams:
Molar mass of C2H2 = 26.04 g/mol
Mass of C2H2 required = number of moles x molar mass
Mass of C2H2 required = = 0.8512 mol x 26.04 g/mol = 22.15 g.
A reaction is a process in which one or more substances, called reactants, undergo a transformation to produce one or more different substances, called products. The transformation involves the breaking and formation of chemical bonds, resulting in a change in the chemical composition and properties of the reactants. Reactions can be classified into several types based on their characteristics, such as the type of chemical bond broken or formed, the presence of energy changes, or the speed of the reaction.
Some common types of reactions include oxidation-reduction reactions, acid-base reactions, and precipitation reactions. Chemical reactions are described using chemical equations, which show the reactants on the left side and the products on the right side, separated by an arrow. The coefficients in the equation indicate the relative amounts of each substance involved in the reaction, and the equation must be balanced to ensure that the law of conservation of mass is obeyed.
To learn more about Reaction visit here:
brainly.com/question/30115256
#SPJ4
when working with acids, which of the following is the proper way to dilute these chemicals? group of answer choices place acid in a graduated cylinder then add water to the correct volume none of the above add water to the acid in a beaker add the acid to water
Adding the acid to water is the proper way to dilute chemicals. Begin by measuring the correct volume of acid in a graduated cylinder. Next, pour the acid into a beaker containing the correct volume of water. Finally, stir the solution until it is fully mixed.
What are acids?Acids are strong chemical compounds. When working with acids, it is important to dilute them in the correct manner to prevent harm to oneself or the surrounding environment.
The correct method of dilution for acids is to add the acid to water, not the other way around. This is because adding water to acid can cause an exothermic reaction that releases heat and may cause the acid to splash and burn you.
When diluting acids, be sure to add the acid to water slowly and stir continuously to prevent splashing and heat generation. Therefore, the correct answer is to add the acid to water.
Learn more about Acids here:
https://brainly.com/question/29796621
#SPJ11
Why is a physical property not a characteristic of matter that you can’t observe or measure without changing the identity of matter
Answer:
Characteristics of matter change due to chemical changes, not physical ones. Physical properties can be determined without changing the substance's chemical identity
Explanation:
Consult your laboratory notebook and notes about the color changes you observed during the titration to select the choice that most correctly describes the pH range and color change observed with the phenolphthalein indicator. a. When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9 and was deep purple at the first equivalence point. b. When the indicator was added to the solution, it started out a deep purple, turned to pink at about pH 9 which faded to become colorless at the first equivalence point. c. When the indicator was added to the solution, started out blue, became green during the titration at about pH 5 and turned to yellow at the second equivalence point and beyond. d. When the indicator was added to the solution, it started out yellow, passed through green at about pH 5 and became blue at the second equivalence point and beyond.
Consulting the laboratory notebook and notes about the color changes observed during titration, it is seen that the most accurate option for phenolphthalein is option (a).
When phenolphthalein was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point.
Phenolphthalein is a pH-sensitive indicator that changes color in the pH range of 8.3 to 10.0. The colorless form of phenolphthalein is present in acidic solutions, whereas the pink form of phenolphthalein is present in basic solutions. The deep purple coloration is representative of the first equivalence point.
The pH of a solution can be determined using an acid-base indicator. Indicators are chemicals that change color in response to changes in acidity. Indicators are typically used to determine the endpoint of an acid-base titration when the pH changes rapidly over a small range of volumes. The color of the indicator corresponds to a specific pH value.
A colorless solution with a low pH will gradually become pink as it approaches the endpoint. As a result, the pH range observed with the phenolphthalein indicator is from about pH 8.3 to 10.0, with a color change from colorless to pink occurring around pH 9.0.
Therefore, "When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point" is the correct answer.
To know more about phenolphthalein, refer here:
https://brainly.com/question/15211751#
#SPJ11
10 ml of ethanol is mixed with 250 ml of water calculate the volume percentage of ethanol
A: Branched Group Type and Location:
(Hint: There are two, but they are the same type)
b. Longest Chain:
c. Functional Group:
d. Full Name of Compound:
The longest chain is pentane
The functional group is alkene
The name of the compound would be based on the kinds of substituents present.
What are the types of branching in organic compounds?In organic chemistry, there are two main types of branching in organic compounds: chain branching and positional branching.
Chain branching: Chain branching occurs when a side chain (alkyl group) is attached to the main carbon chain of a molecule. This results in a change in the chemical and physical properties of the molecule, such as boiling point, melting point, and solubility. Examples of chain-branched compounds include isobutane (2-methylpropane), isopentane (2-methylbutane), and neopentane (2,2-dimethylpropane).
Positional branching: Positional branching occurs when a substituent is attached to a specific position on the main carbon chain of a molecule. This type of branching can occur in cyclic or acyclic molecules, and can have a significant impact on the properties and reactivity of the molecule. Examples of positional-branched compounds include tert-butyl alcohol (2-methyl-2-propanol), 1-chloro-3-methylbutane, and 2,4-dimethylhexane.
Learn more about organic compounds:https://brainly.com/question/5994723
#SPJ1
Jeniah was calculating the mass of her favorite rocket fuel Hydrogen peroxide (H2O2). She wants to use some of it in a devil's toothpaste explosion, but she needs to do it safely and have accurate measurements. Check her work to ensure she has proper amounts. Below is her calculation of the molar mass of hydrogen Peroxide using the periodic table: Hydrogen- 1 gram per mole x 2 atoms = 2 grams per mole Oxygen - 16 grams per mole x 1 atoms = 16 grams per mole Total = 18 grams per mole Jeniah's calculation is going to result in the reaction she is planning true or false
Answer:
Jeniah's calculation of the molar mass of hydrogen peroxide is correct.
Explanation:
Here is a step-by-step explanation of how she arrived at the answer:
Jeniah identified the atomic masses of each element in hydrogen peroxide from the periodic table.She then counted the number of atoms of each element in the molecule of hydrogen peroxide, which in this case is 2 hydrogen atoms and 2 oxygen atoms.She then multiplied the atomic mass of each element by the number of atoms in the molecule.Finally, she added the products of the previous step together to obtain the molar mass of hydrogen peroxide.In this case, the molar mass of hydrogen peroxide that Jeniah calculated is 18 grams per mole, which is the correct molar mass for this compound. This means that if Jeniah uses this amount of hydrogen peroxide, she will have the correct amount of the compound needed for her experiment. However, it's important to note that in addition to knowing the amount of a substance needed for an experiment, it's also important to handle the substance safely and follow all necessary precautions to avoid accidents or harm.
Which of the following incorrectly shows the bond polarity? Show the correct bond polarity for those that are incorrect.
a. δ+H—Fδ–
b. δ+Cl—Iδ–
c. δ+Si—Sδ–
d. δ+Br—Brδ–
e. δ+O—Pδ–
The following among the given five incorrectly shows the bond polarity: δ+Br—Brδ–.
A bond's polarity is determined by the difference in electronegativity between the two atoms in the bond. The covalent bond is non-polar if the atoms are similar and have identical electronegativities. A bond is polar if the atoms have a significant difference in electronegativities. A polar bond is a bond between two atoms with different electronegativities in which the electrons in the bond are not shared equally, resulting in unequal distribution of electrical charge.
The electrons are pulled closer to the more electronegative atom in a polar covalent bond, resulting in a partial negative charge (δ-) on one end and a partial positive charge (δ+) on the other end.The polarity of bonds is represented by symbols δ+ and δ−, which represent the relative positive and negative electrical charges on the atoms, respectively.The correct bond polarity is δ+Br—Brδ–
More on bond polarity: https://brainly.com/question/10777799
#SPJ11
based on this information, which of the following is correct? a. succinate dehydrogenase is the enzyme, and fumarate is the substrate fumarate is the product, and malonic acid is a noncompetitive inhibitor. b. malonic acid is the product, and fumarate is a competitive inhibitor. c. succinate is the substrate, and fumarate is the product. d. succinate dehydrogenase is the enzyme, and malonic acid is the substrate.
The correct option based on the information given is:a. succinate dehydrogenase is the enzyme, and fumarate is the substrate.
Explanation:Succinate dehydrogenase is the enzyme involved in the conversion of succinate to fumarate.
This enzyme complex is also known as Complex II of the electron transport chain. The reaction catalyzed by succinate dehydrogenase is an oxidation-reduction reaction.
In this reaction, succinate is oxidized to fumarate, and FAD is reduced to FADH2.
This reaction is an important step in the process of cellular respiration, as it generates a molecule of FADH2 that can be used to produce ATP through oxidative phosphorylation.
These inhibitors bind to the active site of the enzyme and block the binding of succinate
.This inhibition is reversible, as the inhibitor can be displaced by high concentrations of substrate
For more information about succinate dehydrogenase refer here :
https://brainly.com/question/13943912?
#SPJ11
a 1m solution contains 20 grams of solute in 500ml of solution. what is the mass of 1 mole of solute
The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).
How to determine mass?To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles
Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol
Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol
Therefore, the mass of 1 mole of solute is 40 grams.
Learn more about Mass here:
https://brainly.com/question/19694949
#SPJ11
Which of the following is most likely to cause you to start a filtration over again?
A.
failure to use a stirring rod
B.
overflowing the top edge of the filter paper
C.
placing the tip of the funnel in the center of the beaker
D.
using too large a piece of filter paper
Answer:
overflow the top edge of the filter paper