Answer:
C
Explanation:
true because c is the best answer
Answer: The answer is C. It is true because the two cities are at the same latitude.
Explanation:
Hi I was doing the same test are u in flvs lol I am too if you are!
Calculate the range of wavelengths that are received by the radio in a car. Suppose that the range of frequencies of FM radio is 88.0 MHz to 108 MHz.
The range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.
To find the range of wavelengths, we use the equation for the speed of a wave
Speed of a waveThe speed of a wave v = fλ where
f = frequency and λ = wavelengthWhat is Wavelength?This is the distance a wave travels in one cycle of the wave.
Making λ subject of the formula, we have
λ = v/f
Given that the range of frequencies of FM radio is 88.0 MHz to 108 MHz and
v = speed of electromagnetic wave = 3 × 10⁸ m/s, f' = lowest frequency = 88.0 MHz = 88.0 × 10⁶ Hz and f" = highest frequency = 108 MHz = 108 × 10⁶ HzThe longest wavelength, λ'λ' = v/f'
= 3 × 10⁸ m/s ÷ 88.0 × 10⁶ Hz
= 0.0341 × 10² m
= 3.41 m
The shortest wavelength, λ"λ" = v/f"
= 3 × 10⁸ m/s ÷ 108 × 10⁶ Hz
= 0.0278 × 10² m
= 2.78 m
So, the range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.
Learn more about wavelength here:
https://brainly.com/question/26637292
Prelab exercise 1. Why is it important for your measurements that the track is level?
It is very important for your measurements that the track is level because unlevel track change the acceleration of an object.
Why track's level is important?A non-level track leads to bring change in the acceleration of an object which leads to different value of experiment.
So we can conclude that it is important for your measurements that the track is level because unlevel track change the acceleration of an object.
Learn more about track here: https://brainly.com/question/25705738
The track must be level for your measurements because an unlevel track changes the acceleration of an object.
What is measurement?It is defined as the numerical quantity that gives an idea about object length, width, and many more. It can be used to compare two objects.
The non-level track causes changes in an object's acceleration, resulting in various experiment values.
As a result, we can deduce that now the levelness of the track is critical for your measurements, as an uneven track changes an entity's acceleration.
Thus, the track must be level for your measurements because an unlevel track changes the acceleration of an object.
Learn more about the measurements here:
brainly.com/question/4725561
#SPJ4
In order to compare the two thermal conductivities ,a scientist pours hot water into two beakers .
The two different insulators are wrapped around the beakers . The scientist records the intial temperatures of the hot water
State two further measurements he scientist should make
( if you don’t know please don’t reply )
Answer:
Time domain and frequency domain
A student watches the tide change, and sees water waves pass the end of the dock
that follow the pattern shown below:
13)
The student counts the waves with a stopwatch, and determines that it takes 8.75
seconds for a single wave to go by. The wave frequency is ----
The frequency of the wave at the given period is 0.114 Hz. This frequency shows the number of revolution of the wave in a second.
What is frequency of a wave?The frequency of a wave is the number of revolutions of the wave per second.
Frequency of a wave is determined by taking the inverse of period of the wave.
The frequency of the wave at the given period is calculated as follows;
f = 1/T
Where;
f is the frequencyT is period of the wavef = 1/8.75
f = 0.114 Hz
Thus, the frequency of the wave at the given period is 0.114 Hz.
Learn more about frequency of wave here: https://brainly.com/question/10728818
An object is in simple harmonic motion of the following quantities related to the object, which set of three can have maximum
magnitudes at the same instant of time?
i. displacement
ii. velocity
iii. acceleration
iv. kinetic energy
v. potential energy
Answer:
displacement, acceleration, potential energy
Explanation:
pretty sure this is correct but dont hold me to it.
The set of three that can have maximum magnitudes at the same instant of time will be displacement, acceleration, and potential energy.
What is simple harmonic motion?Simple harmonic motion is periodic motion caused by a restoring force that is proportionate to the deviation from equilibrium.
Simple harmonic motion is periodic motion but many other conditions are dependent.
The object is in simple harmonic motion of the following quantities related to the object.
The set of three that can have maximum magnitudes at the same instant of time will be displacement, acceleration, and potential energy.
Hence the set of three quantities is the options i, iii,v.
To learn more about the simple harmonic motion refer to the link;
https://brainly.com/question/17315536
Define resistance of a conductor. State the factors on which resistance of a conductor depends.
Name the device which is often used to change the resistance without changing the voltage source in an electric circuit.
Calculate the resistance of 50 m length of wire of cross-sectional area 0.01 square mm and of resistivity 5 ×10 ^-8 ohm m
1. Resistance is the opposition offered in a path of flow of current by the atoms or molecules of the conductor.
Factors on which resistance of a conductor depends are:
Length [tex]R \propto l[/tex]Area of cross section [tex]R \propto \dfrac{1}{A}[/tex]Nature of the material2. Rheostat is used to change the resistance without changing the voltage source in an electric circuit.
3.
Given :
[tex]\dashrightarrow l = 50 m[/tex]
[tex]\dashrightarrow A = 0.01 {mm}^{2} [/tex]
[tex]\dashrightarrow A = 0.01 \times {10}^{ - 6} \: {m}^{2} [/tex]
[tex]\dashrightarrow \rho = 5 \times {10}^{ - 8} \: \Omega \: m[/tex]
We know that,
[tex] \dashrightarrow R = \rho \dfrac{l}{A}[/tex]
[tex] \dashrightarrow R = 5 \times {10}^{ - 8} \bigg(\dfrac{50}{0.01 \times {10}^{ - 6} } \bigg)[/tex]
[tex] \dashrightarrow { \pink{ \underline{ R = 250 \: \Omega }}}[/tex]
The resistance of a conductor is the opposition to the flow of current and depends on the length and area of the material
What is resistance of a conductor?Resistance is the opposition to the flow of current by the atoms or molecules of the conductor.
The factors on which resistance of a conductor depends are:
Length of materialcross-sectional area of the materialNature of the materialA Rheostat is the device used to change the resistance without changing the voltage source in an electric circuit.
The resistanceis given as:
R = resistivity × length/ areaArea = 0.01 square mm = 1.0 × 10^-8 square m
R = (50 × 5 ×10 ^-8 ohm m)/1.0 × 10^-8 square m
Resistance = 250 ohm
Therefore, resistance of a conductor is the opposition to the flow of current.
Learn more about resistance at: https://brainly.com/question/25997303
#SPJ5
What is Al's hypothesis?
options:
If I freeze fresh water and salt water then the salt water will freeze more quickly because salt increases the freezing point temperature.
If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature
If I freeze fresh water and salt water then both will freeze at the same time because salt doesn't affect the freezing time.
If I freeze cool aid and water then the water will freeze more quickly because cool aid increases the freezing point temperature.
Answer:
This is your answer
If I freeze fresh water and salt water then the fresh water will freeze more quickly because salt lowers the freezing point temperature
Explanation:
I hope it helped you
i need help, please. ASAP!!!!
Answer: A
Explanation:
Work is defined as the inner product between the force vector and the distance traveled. Due to the energy-work theorem, the total work done is equal to the change in kinetic energy. But since there is friction, we must also take into account that frictional force. The frictional force opposes the motion of the object, and will take away energy from the object in the form of heat. Therefore, we must subtract the amount of energy done by friction from the total kinetic energy.
For your case, the answer would be A. Although, that is technically incorrect. The car does not gain energy due to friction.
define one meter lendth
Explanation:
The metre is currently defined as the length of the path travelled by light in a vacuum in 1299 792 458 of a second.
Hope it helps
Have a great day
TC
:DD
What happens to force if you decrease the charge on one of two charges?
Answer:
This repulsion would be reduced to one-quarter of its former value.
Explanation:
hope this helps. (MARK ME BRAINLIEST, please.)
The energy for _____ transport comes from the gradient itself
Answer:
the anwser is atp
Explanation:
To move substances against a concentration or an electrochemical gradient the cell must use energy. This energy is harvested from ATP that is generated through cellular metabolism. Active transport mechanisms, collectively called pumps or carrier proteins work against electrochemical gradients.
The energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
What is passive transport?The passive transport is the shifting or transfer of a solute from a place where the electrochemical potential is high to a place where the electrochemical potential is low.
Energy require for passive transport-
Compound moves free from high electrochemical potential to low in memberne.Due to free movement, there in no energy required in passive transport.Thus, the energy for passive transport comes from the gradient itself, in which transfer of a solute from high electrochemical potential to low take place.
Learn more about the passive transport here
https://brainly.com/question/25802833
#SPJ4
2. What is the difference between electric potential energy and gravitational potential energy? Name one
example of an object having one type of potential energy but not the other.
Gravitational potential energy is an energy acquired by an object due to a change in its height when it is present in a gravitational field. It is denoted by P or U. and it its expressed in joule. Gravitational potential energy is given by U = mgh where m is the mass of the object, g is acceleration due to gravity and h is the height.
when we take an object of mass m to a certain height in the field of gravitation, we can say that body has potential energy and we release that body from that height, it falls.
Electric potential energy is the energy that is needed to move a charge against the electric field.
Electric Potential Energy is given by,
[tex]U_E = k \frac{q_1q_2}{r}[/tex] where k is dielectric constant, q is charge r is the distance.
Electric Potential Energy is the potential energy stored against electric field. it exist around the charged particle.
To know more about electric potential energy :
https://brainly.com/question/12645463
#SPJ2.
50 points
lab report guide (4).docx What do the results tell you about your hypothesis(es)? Results will tell you which hypothesis is true How do the data support your claim above?
Answer: Put simply, a hypothesis is a specific, testable prediction. More specifically, it describes in concrete terms what you expect will happen in a certain circumstance. A hypothesis is used to determine the relationship between two variables, which are the two things that are being tested.
Explanation:
The field found in this problem for a moving charge is the same as the field from a current element of length dl carrying current i provided that the quantity qv is replaced by which quantity?
The magnetic field for a moving charge is the same as the magnetic field from a current element of length, dL, carrying current, I, provided that the quantity qv is replaced by 'IL'.
Magnetic force on charged particleThe magnetic force on a charged particle is determined from the product of the magnetic field strength (B), speed of the charge (v) and magnitude of the charge (q).
The magnitude of the force is caculated using the following formula;
F = qvB
Magnetic force on a current carrying elementThe magnitude of the force is calculated using the following formula,
F = BILsinθ
when the angle of inclination = 90 degreesF = BIL
Where;
B is the magnetic field strengthI is currentL is length of the wireAt equal magnetic force, the magnetic field can be calculated as follows;
B = F/qv = F/IL
Thus, the magnetic field for a moving charge is the same as the magnetic field from a current element of length, dL, carrying current, I, provided that the quantity qv is replaced by 'IL'.
Learn more about magnetic force here: https://brainly.com/question/13277365
The moving charge is the same as the field from a current element of length dl carrying current I provided that the quantity qv is replaced by "IL".
What is a magnetic field?It is the type of field where the magnetic force is obtained. With the help of a magnetic field. The magnetic force is obtained it is the field felt around a moving electric charge.
The magnetic force on the charged particle is found as;
[tex]\rm F = qvB[/tex]
The magnetic force on the current-carrying wire is found as;
[tex]\rm F = BIL sin \theta[/tex]
When the angle of inclination is at a right angle;
[tex]\rm F= BIL[/tex]
The magnetic field is;
[tex]\rm B = \frac{F}{qv} \\\\ B= \frac{F }{IL}[/tex]
The moving charge is the same as the field from a current element of length dl carrying current I provided that the quantity qv is replaced by "IL".
Hence the quantity qv is replaced by "IL".
To learn more about the magnetic field refer to the link;
https://brainly.com/question/19542022
#SPJ4
What is current of 12 ohm? help me pleasee
Answer:
2.5A
Explanation:
We know the relation :
V = IR
V = voltage (potential difference)I = currentR = resistanceBy using the formula,
I = V/RI = 30/12I = 10/4I = 2.5AAnswer :-
Current of Device = 2.5 Ampere .Explanation :-
As per the provided information in the given question, we have been given that the Potential Difference is 30 Volt . The Resistance is given as 12 Ohm . And, we have been asked to calculate the Current of the Device.
For calculating the Current , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed { \sf{ \: Current \: = \: \dfrac{Potential \: Difference}{Resistance} \: }} [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \dag \: \: \: \sf { Current \: = \: \dfrac{Potential \: Difference}{Resistance} } [/tex]
[tex] \longmapsto \: \: \: \sf { Current \: = \: \dfrac{30}{12} } [/tex]
[tex] \longmapsto \: \: \: \textbf {\textsf {Current \: = \: 2.5 }} [/tex]
Hence :-
Current = 2.5 Ampere .[tex]\underline {\rule {180pt} {4pt}} [/tex]
What is the moons gravity
Answer:
The moons gravity is 1.62 m/s²
A plot of the maxwell distribution for the same gas against temperature shows that.
2. Describe asteroids and their orbits in the solar system.
Asteroids, often known as minor planets, are stony, airless leftovers of our solar system's early development about 4.6 billion years ago.
The majority of this ancient space junk may be found in the main asteroid belt, orbiting the Sun between Mars and Jupiter. Asteroids range in size from Vesta, the largest at 329 miles (530 kilometers) in diameter, to asteroids as small as 33 feet (10 meters). The cumulative mass of all asteroids is less than that of the Earth's Moon.
Which statement describes the particles that make up the rigid structure of a three-dimensional crystalline solid?
A. They move more quickly than the particles in the gas of the substance.
B. They move more quickly than the particles in the liquid of the substance.
C. They move around freely to various locations in a random pattern.
D. They move by vibrating in their locations within a fixed pattern.
Answer:
Explanation:
Did u get the answer
Answer:
D
Explanation:
What happens when light waves strike a mirror? question 5 options: most of the light waves are refracted. most of the light waves are absorbed. most of the light waves are scattered. most of the light waves are reflected.
Answer: "Most of the light waves are reflected", might be the correct answer.
Explanation: it might be the correct answer because the light waves spread out from the source in all directions, and upon striking a mirror, are reflected at an angle determined by the angle at which the light arrives. The reflection process inverts each wave back-to-front, which is why a reverse image is observed.
Answer:
most light waves are reflected
explanation:
when light hits a mirror it bounces back at the same angle it hit this is called reflection refraction on the other hand Refraction is the bending of light
Image result for what is refraction of light
Refraction is the bending of light
Create your own simple metaphor illustrating how demand and supply work together to create equilibrium. Label the following on your metaphor: quantity demanded, quantity supplied, equilibrium point
''When the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.''
How equilibrium occur?The equilibrium price and equilibrium quantity occur where the supply and demand curves cross with each other. The equilibrium occurs when the quantity demanded is equal to the quantity supplied.
So we can conclude that when the quantity demanded intersect with quantity supplied, it leads o the formation of equilibrium point.
Learn more about equilibrium here: https://brainly.com/question/517289
Equilibrium is the condition when the supply of any goods meets the demands completely. The point at which the graph intersects is the equilibrium price.
What is Equilibrium?Equilibrium is the condition when the supply of any goods meets the demands completely. Therefore, no extra goods are left.
Equilibrium is the condition when the supply and the demand line cross each other on a price and quantity graph as shown below. The point at which the graph intersects is the equilibrium price.
Learn more about Equilibrium Price:
https://brainly.com/question/12894603
#SPJ4
Your friend left their science project off until the "night before" and now they are frantic to build a home made weather station that can measure relative humidity. They build the standard two – thermometer setup but their water had just been shut off and so they use salad oil on the wet bulb thermometer. Please describe how well their instrument will work and the physics behind your answer.
The usage of the wet bulb thermometer is important to measure the relative humidity or the air.
How to explain the temperature?It should be noted that air can be saturated with different amount of water vapors according to its temperature.
The percentage of water vapor with the amount of water at the temperature is the relative humidity. Based on the question, the salad oil is important rather than using water since oil doesn't evaporate.
Learn more about temperature on:
https://brainly.com/question/24746268
Air in a piston cylinder assembly undergoes a process from state 1 where t1=300k
For a process where T1 = 300K, P1 = 100 kPa, and where T2 = 500K, P2 = 650 kPa, the change in entropy is mathematically given as
S1-S2=-0.0288KJ/Kgk
What is the change in entropy between the two states, in kJ/kg-K?Generally, the equation for the entropy is mathematically given as
S1-S2=mcp*lnt2-t1-Rlnt2/t1
Therefore
S1-S2=1+1.004*ln(500/300)-0.287*ln(650/100)
S1-S2=-0.0288KJ/Kgk
In conclusion, Entropy
S1-S2=-0.0288KJ/Kgk
Read more about Heat
https://brainly.com/question/13439286
Complete Question
Air in a piston-cylinder assembly undergoes a process from state 1, where T1 = 300K, P1 = 100 kPa, to state 2, where T2 = 500K, P2 = 650 kPa. Using the ideal gas model for air, determine the change in entropy between the two states, in kJ/kg-K
The change in entropy between the two states, in a piston cylinder assembly, undergoes a process from state 1 where t1=300k is 2.36 kJ/kg K.
How to find change in entropy?The change in entropy can be find out using the following formula,
[tex]S1-S2=s^oT_1-R\ln \dfrac{p_2}{p_1}[/tex]
Here, (p1 and p2) are the pressure at state 1 and 2 and R is the gas constant. The value of R is,
R=(8.314/28.97).
Air in a piston-cylinder assembly undergoes a process from state 1, where T1 = 300 K, p1 = 100 kPa, to state 2. where T2 = 500 K, p2 = 650 kPa.
Put these values,
[tex]S_2-S_1=1.70203_1-\dfrac{8.314}{28.97}\ln \dfrac{10\text { bar}}{1\text { bar}}\\S_2-S_1=2.36\rm\; kJ/kg K[/tex]
Thus, the change in entropy between the two states, in a piston cylinder assembly undergoes a process from state 1 where t1=300k is 2.36 kJ/kg K.
Learn more about the change in entropy here;
https://brainly.com/question/15022152
#SPJ4
An empty coal car of a train of mass 8000 kg is moving at 12 m/s along rails. 24000 kg of coal is dumped into the car from a motionless bin. What is the speed of the coal car afterward?
Answer:
3 m/s
Explanation:
Initial = Final
Mass * Velocity = Mass *Velocity
8000kg * 12m/s = (8000kg+ 24000kg) * (Final Velocity)
(96000 kgm/s) / (32000kg) = (Final Velocity)
Final Velocity = 3 m/s
The speed of the coal car afterward is 3 m/s if an empty coal car of a train of mass 8000 kg is moving at 12 m/s along rails. 24000 kg of coal is dumped into the car from a motionless bin.
What is the law of conservation of momentum?The momentum of the body before the contact is always equal to the momentum of the body after the collision, according to the law of conservation of momentum.
According to the law of conservation of momentum;
Momentum before collision =Momentum after collision
We have:
Mass of the empty coal car of train M(e) = 8000 kg
Speed V(e) = 12 m/s
Mass of the coal M(c) = 24000 kg
Let's suppose the speed of the coal car afterward V(c)
M(e) ×V(e) = (M(c)+M(e))× V(c)
8000×12 = (24000+8000)×V(c)
V(c) = 3 m/s
Thus, the speed of the coal car afterward is 3 m/s if an empty coal car of a train of mass 8000 kg is moving at 12 m/s along rails. 24000 kg of coal is dumped into the car from a motionless bin.
Learn more about the law of conservation of momentum here:
https://brainly.com/question/1113396
#SPJ4
In outer space, a piece of rock continues moving at the same velocity for
thousands of years. What makes this possible?
The absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.
Absence of external force on the outer spaceThe outer space is almost an absolute vacuum, because it's nearly empty. There is no matter such as air in the outer space that will provide an external force needed to change the velocity of the piece of rock.
From Newton's first law of motion, an object in a state of rest or uniform motion in a straight line, will continue in that state unless it is acted upon by an external force.
Thus, the absence of external force in the outer space, allows the piece of rock to continue moving at the same velocity for thousands of years.
Learn more about outer space here: https://brainly.com/question/24701339
Answer:
inertia
Explanation:
If c is a positive real number and ak=klnc, for what values of c, if any, does the infinite series ∑k=1[infinity]ak converge?
There is no value of c such that the infinite series converges.
How to analyze the converge of an infinite series
Convergence is a characteristic of infinite series, in which a sum tends to be a given number when n tends to +∞.
In this question we must prove for which values of c the infinite series may converge.
There are different criteria to prove whether a given series converges or not, one of the most used criteria is the ratio criterion, which states that:
[tex]r = \frac{a_{k+1}}{a_{k}}[/tex], where the series converges if and only if r > 1. (1)
If we know that [tex]a_{k} = k\cdot \ln c[/tex], then the rational formula is:
[tex]r = \frac{(k+1)\cdot \ln c}{k\cdot \ln c}[/tex]
[tex]r = 1 + \frac{1}{k}[/tex]
We notice that resulting expression does not depend on c and is greater than 1. Therefore, there is no value of c such that the infinite series converges. [tex]\blacksquare[/tex]
RemarkIf [tex]c[/tex] is a positive real number and [tex]a_{k} = k\cdot \ln c[/tex], for what values of [tex]c[/tex], if any, does the infinite series [tex]\sum_{k=1}^{\infty} a_{k}[/tex] converge?
To learn more on series, we kindly invite to check this verified question: https://brainly.com/question/10813422
There is no values of c, for the infinite series ∑k=1[infinity]ak to be converge when c is a positive real number.
What do you mean by infinite series?The infinite series is the sum of addition of a sequence in which the number of terms present are infinite.
[tex]a_1+a_2+a_3....+a_n[/tex]
Here, ([tex]a_n[/tex]) is the nth term of the sequence. For infinite series, the ratio criterion can be given as,
[tex]r=\dfrac{a_{k+1}}{a_k}[/tex]
If c is a positive real number and
[tex]a_k=k\ln c[/tex]
Put the value in above shown ratio,
[tex]r=\dfrac{(k+1)\ln c}{k\ln c}\\r=\dfrac{k\ln c}{k\ln c}+\dfrac{\ln c}{k\ln c}\\r=1+\dfrac{1}{k}[/tex]
With the value of r, we can say whether the series is converge or not. This value of r does not depends on c.
Thus, there is no values of c, for the infinite series ∑k=1[infinity]ak to be converge when c is a positive real number.
Learn more about the infinite series here;
https://brainly.com/question/26133507
#SPJ4
A thin rod of length d on a frictionless surface is pivoted about one end
The magnitude of the angular momentum of the rod immediately after the collision is given as (pf + pi) * d. (Option A).
What is Angular Momentum?
Angular Momentum may be defined or described as the vector quantity of the rotation of a body, which is arrived at by multiplying its moment of inertia by its angular velocity.
The formula for Angular Momentum is given as:
L = mvr; Where
L = Angular Momentum
m = mass
v = velocity; and
r = radius.
Learn more about Angular Momentum at:
https://brainly.com/question/4126751
[tex]\rm( P_f+P_i)d[/tex] is the magnitude of the rod's angular momentum immediately after the contact. Option A is correct.
What is the definition of Angular Momentum?Angular Momentum may be defined as the vector quantity of a body's rotation, which is calculated by multiplying its moment of inertia by its angular velocity.
The Angular Momentum formula is as follows:
[tex]\rm L=I\omega[/tex]
[tex]\rm L = mvr[/tex]
Where,
L is the angular momentum
m stands for mass.
v stands for velocity, and
r stands for radius.
Hence option A is correct.
To learn more about the angular momentum refer to the link;
brainly.com/question/4126751
#SPJ4
What is the Earth’s atmosphere composed of, and why is it important?
Answer:
i hope this helps you have a good day i hope you get an 100% on you quiz!
Explanation:
The atmosphere is a mixture of nitrogen (78%), oxygen (21%), and other gases (1%) that surrounds Earth. High above the planet, the atmosphere becomes thinner until it gradually reaches space. The atmosphere is an important part of what makes Earth livable.
A garbage can of mass 12 kg standing on horizontal ground is pushed by a horizontal force of 40N. If the coefficient of static friction is 0. 32 and the coefficient of dynamic or
kinetic friction is 0. 24 between the can and ground, the acceleration of the garbage can is
____ m/s2
The acceleration of the garbage can is 2.55 m/s².
What is acceleration?Acceleration is the rate of change of velocity with respect to time.
To calculate the acceleration of the can, we use the formula below
Formula:
ma = F-mg(η-μ)............ Equation 1Where:
F = Horizontal forcem = mass of the cang = acceleration due to gravitya = acceleration of the canμ = Coefficient of static frictionη = Coefficient of kinetic frictionMake a the subject of the equation
a = [F-mg(η-μ)]/m.................. Equation 2From the question,
Given:
F = 40 Nm = 12 kgg = 9.8 m/s²μ = 0.32η = 0.24Substitute these values into equation 2
a = [40-12×9.8(0.32-0.24)]/12a = (40-9.408)/12a = 30.592/12a = 2.55 m/s²Hence, the acceleration of the garbage can is 2.55 m/s².
Learn more about acceleration here: https://brainly.com/question/605631
Use the electron arrangement interactive to complete the table
The number of electrons that is needed to fill the following sublevels are:
1s = 2 electrons. 2s = 2 electrons. 2p = 6 electrons. 3s = 2 electrons. What is the number of electrons needed to complete the table?The formula to find this out is:
= 2 x (2 x Level +1)
1s = 0 levels
Number of electrons:
= 2 x (2 x 0 + 1)
= 2 electrons
2s = 0 levels
= 2 x (2 x 0 + 1)
= 2 electrons
2p = 1 level
= 2 x (2 x 1 + 1)
= 6 electrons
3s = 0 levels
= 2 x (2 x 0 + 1)
= 2 electrons
Find out more on electron arrangement at https://brainly.com/question/11316046.
The completed table using the electron arrangement interactive is attached below. In this table for sublevel 1s, 2s, 2p and 3s electron needed is 2,2,6 and 2 respectively.
What is electron arrangement?The electron arrangement is the way or process to arrange the electrons in an atom. The number of electron needed per sublevel are expressed in following points.
The number of electron need to feel sublevel 1s is 2.The number of electron need to feel sublevel 2s is 2.The number of electron need to feel sublevel 2p is 6.The number of electron need to feel sublevel 3s is 2.The image of the table which fill the sublevel is attached below. In this table all the electron is fulfilled with needed electrons.
Thus, the completed table using the electron arrangement interactive is attached below. In this table for sublevel 1s, 2s, 2p and 3s electron needed is 2,2,6 and 2 respectively.
Learn more about the electron arrangement here;
https://brainly.com/question/27184897
#SPJ4