Answer:
a) Tripling the concentration of a reactant increases the rate of a reaction nine times.the order of the reaction with respect to that reactant is 2
b)Increasing the concentration of a reactant by a factor of four increases the rate of a reaction four times.the order of the reaction with respect to that reactant is 1.
Explanation:
a) The order of the reaction with respect to that reactant is 2. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:
rate = k[A]^x[B]^y[C]^z
Where k is the rate constant and x, y, and z are the orders of the reaction with respect to the corresponding reactants. When [A] is tripled, the rate increases nine times, indicating that the rate is proportional to [A]^2. Therefore, the order of the reaction with respect to [A] is 2.
b) The order of the reaction with respect to that reactant is 1. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:
rate = k[A]^x[B]^y[C]^z
When [A] is quadrupled, the rate increases four times, indicating that the rate is proportional to [A]. Therefore, the order of the reaction with respect to [A] is 1.
To know more about concentration of a reactant refer here:https://brainly.com/question/4600091#
#SPJ11
When drawing the Lewis structure of the H,CO molecule, the structure should represent a total of 12 valence electrons. Based on the elements present, a total of electrons are needed for a stable structure. Thus, there should be bonds in the structure, The ____... - atom should be in the center with ____... and _____.
When drawing the Lewis structure of the H, CO molecule, the structure should represent a total of 12 valence electrons. The carbon atom should be in the center with one hydrogen and one oxygen.
What is Lewis structure?A Lewis structure is a diagram that shows the lone pairs and bonding pairs of electrons in a molecule or ion. Valence electrons are the outermost electrons of an atom that take part in chemical reactions. They are placed on the Lewis structure's outermost orbitals.
The Lewis dot structure of CO and H are given below: Carbon has four valence electrons, and oxygen has six valence electrons. Hydrogen has one valence electron. The total valence electrons for CO and H can be calculated as follows:
Valence electrons for CO: Valence electrons for C = 4
Valence electrons for O = 6
Total valence electrons for CO = 4 + 6 = 10
Valence electrons for H : Valence electrons for H = 1
Total valence electrons for H₂O = 1 × 2 = 2
Total valence electrons for H, CO = 10 + 2 = 12
In the Lewis structure of H, CO, the carbon atom should be in the center with one hydrogen and one oxygen. The carbon atom, which is the least electronegative element, should be in the center since it has to make the most bonds. One oxygen and one hydrogen atom should be bonded to the carbon atom. There should be one double bond between carbon and oxygen.
Learn more about Lewis structure here:
https://brainly.com/question/20300458
#SPJ11
The pH of a 0.74 M solution of alloxanic acid (HC4H3N2O5) is measured to be 3.39.
Calculate the acid dissociation constant Ka of alloxanic acid.
Be sure your answer has the correct number of significant digits.
The correct answer for Acid dissociation constant of alloxanic acid is 1.09 × 10⁻.
The formula for alloxanic acid is HC4H3N2O5. Its pH, when it is in a 0.74 M solution, is 3.39.
We need to determine the acid dissociation constant of alloxanic acid. We can use the following formula for this purpose:
Ka = [H+][A-] / [HA] Where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
We need to find out the concentration of hydrogen ions and the concentration of the acid. The pH of a solution is equal to the negative log of the hydrogen ion concentration.
We can use this formula to determine the concentration of hydrogen ions: pH = -log[H+] We can rearrange this equation to get [H+]: [H+] = 10-pH.
The concentration of hydrogen ions is: [H+] = 10-3.39 = 4.45 × 10⁻⁴M The concentration of the acid is 0.74 M. The concentration of the conjugate base can be determined by the following formula: [A-] = [H+] × (Ka / [HA]).
We can rearrange this equation to get Ka: Ka = ([H+] × [HA]) / [A-]
Substituting the values, we get: [A-] = [H+] × (Ka / [HA]) [A-] = (4.45 × 10-4) × (Ka / 0.74) [A-] = 3.01 × 10⁻⁶Ka
We can substitute this value of [A-] in the above formula for Ka:Ka = ([H+] × [HA]) / [A-]Ka = (4.45 × 10⁻⁴) × 0.74 / 3.01 × 10⁻⁶Ka = 1.09 × 10⁻⁵.
For more information about acid dissociation constant refer here
https://brainly.com/question/15012972?
#SPJ11
4. Complete the following radioactive decay equations by identifying the isotope X.
Indicate whether alpha or beta decay occurs.
a. 214Pb→aX+0e
82. Z. -1
According to the question isotope X is 214Bi, and alpha decay occurs.
What is isotope?An isotope is a form of an element that has the same number of protons but a different number of neutrons. Isotopes have the same atomic number and are chemically identical, but the number of neutrons in the nucleus can vary, resulting in different masses or weights. Isotopes can be either stable or unstable and can be used for a number of applications, from medical treatments to energy production. Stable isotopes are found naturally in the environment, while unstable isotopes must be created in a laboratory. Stable isotopes are used for a variety of purposes including dating objects, tracing the movement of elements, and analyzing the diet and migration patterns of animals. Unstable isotopes are used in the field of nuclear medicine and in the production of energy through nuclear power plants. Isotopes are also used in many industries and research labs to study the physical, chemical, and biological properties of elements.
To learn more about isotope
https://brainly.com/question/14220416
#SPJ1
3.00 moles of neon in a flask has a pressure of l.50 atm. the pressure rises to 4.50 atm. when 1.00 mole of hydrogen and some oxygen gas are added to the flask. how many moles of oxygen are added?
0.99 moles of oxygen are added in a flask .
To calculate the number of moles of oxygen added to the flask, we need to use the ideal gas law equation. The ideal gas law is defined by PV = nRT.
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature of the gas.
Considering the first scenario where only neon is present in the flask
Pressure [tex]P_1[/tex] = 1.50 atm
Number of moles [tex]n_1[/tex] = 3.00 mol
The temperature and volume remain constant during the process. Therefore, we can equate the first scenario with the second scenario to get the number of moles of oxygen added in the flask. So, the equation becomes:
[tex]P_1[/tex]V = [tex]n_1[/tex] R [tex]T_1[/tex] [tex]V_2[/tex]
V = (n1 + n2)RT2
Where P2 = 4.50 atm, n1 = 3.00 mol, n2 = Number of moles of oxygen, T1 = T2 (the temperature is constant), R is the gas constant.
[tex]P_1[/tex] V / T = ( [tex]n_1[/tex] + [tex]n_2[/tex] )R... (1)
[tex]P_2[/tex] V / T = ( [tex]n_1[/tex] + [tex]P_2[/tex] )R... (2)
Dividing equation 1 by equation 2, we get:
( [tex]P_1[/tex] V / T) / ( [tex]P_2[/tex] V / T) = [tex]n_1[/tex] + [tex]n_2[/tex] / [tex]n_1[/tex] + [tex]n_2[/tex]
[tex]n_2[/tex] = ( [tex]P_2[/tex] V / T - [tex]P_1[/tex] V / T) / R = (4.50 x V - 1.50 x V) / R = 3.00V / R
For neon, the molecular weight is 20.18 g/mol. Therefore, the mass of neon in the flask is 3.00 x 20.18 g = 60.54 g.
For hydrogen, the molecular weight is 2.02 g/mol. Therefore, the mass of hydrogen added to the flask is 1.00 x 2.02 g = 2.02 g.
The mass of oxygen added to the flask can be calculated by mass balance.
Mass of neon + Mass of hydrogen + Mass of oxygen = Total mass of gas in the flask
60.54 g + 2.02 g + Mass of oxygen = (3.00 + 1.00 + n2) x (2.02 + 32.00 + 20.18) g
Using the above equation, we can calculate the mass of oxygen as follows:
Mass of oxygen = 94.24 - 62.56 g = 31.68 g
Moles of oxygen = 31.68 g / 32.00 g/mol = 0.99 mol
Therefore, 0.99 moles of oxygen are added.
To know more about Moles refer here :
https://brainly.com/question/29367909
#SPJ11
In modeling solid-state structures, atoms and ions are most often modeled as spheres. A structure built using spheres will have some empty, or void, spaces in it. A measure of void space in a particular structure is the packing efficiency, defined as the volume occupied by the spheres divided by the total volume of the structure.
Given that a solid crystalizes in a face centered cubic structure that is 4.10 {eq}\overset{o}{A} {/eq} on each side. How many total atoms are there in each unit cell?
There are the presence of atoms on eight corners of the face centered cubic lattice.
Void spaces are called as the gaps that lie within certain constituent particles. These void spaces are highly packed and they can be packed in 1D, 2D, or 3D. Such complexes are seen in many complexes such as coordination complexes. The face-centered cubic lattice which is called FCC is described as the arrangement in which there is an arrangement of atoms at corners as well as at the center of cell's each cube face. There is the presence of four atoms in one unit cell in such lattices. This is a cube with an atom on each corner and each face. It has atoms at each corner of the cube and six atoms at each face of the cube.
a= 5.01°A on each side.
To learn more about face-centered cubic lattice
https://brainly.com/question/14927070
#SPJ4
The complete question is,
In modeling solid-state structures, atoms and ions are most often modeled as spheres. A structure build using spheres will have some empty, or void, space in it. A measure of void space in a particular structure is the packing efficiency, defined as the volume occupied by the spheres divided by the total volume of the structure.
Given that a solid crystallizes in a face centered cubic structure that is 5.01 A on each side.
How many total atoms are there in each unit cell?
which atomic particles are in a unique cloud outside of the nucleus of the atomprotonelectronneutron
The atomic particles known as electrons are found in a distinct cloud outside of the atom's nucleus. The nucleus contains protons and neutrons.
Protons and neutrons are found in the centre nucleus of an atom, and electrons are found in a separate cloud that surrounds the nucleus. The atomic mass of an atom is made up of neutrons, which have no charge, and protons, which have a positive charge. Contrarily, electrons are negatively charged and control an element's chemical characteristics. The electron cloud, also known as the orbital, is the distinct cloud that surrounds the nucleus and is where the electrons are located. It is distinguished by various energy levels or shells. The quantity and configuration of electrons in an atom's electron cloud govern the atom's reactivity and chemical behaviour.
learn more about electrons here:
https://brainly.com/question/12001116
#SPJ4
A student is investigating the properties of several different minerals in order to identify them. What will describe the streak test the student will be performing on each mineral
The student will record the color of the streak produced by each mineral and compare it to a reference chart to help identify the mineral.
The streak test is a method used by geologists and mineralogists to identify minerals based on the color of the powder they leave behind when scraped against a rough surface. To perform the streak test, the student will rub each mineral against a porcelain tile, creating a streak of powder. This powder is typically a different color than the mineral itself and can be used to identify the mineral.
The color of the streak is often more consistent across different samples of the same mineral than the color of the mineral itself. For example, a sample of hematite may be black, gray, or reddish-brown, but its streak will always be red-brown. This makes the streak test a useful tool for identifying minerals.
To learn more about streak test, here
https://brainly.com/question/1486809
#SPJ4
A Bronsted-Lowry base is a proton _____. A Bronsted-Lowry base must contain an available ____ pair of ________ in its formula in order to form a(n) _______ bond to the H+.
Acceptor, lone, electrons, covalent
A Bronsted-Lowry base is a proton acceptor. A Bronsted-Lowry base must contain an available lone pair of electrons in its formula in order to form a covalent bond to the H+. This bond forms when the base accepts the proton (H+) from the
For more similar questions on topic acid. The acid donates a proton and becomes a conjugate base while the base accepts a proton and becomes a conjugate acid. Bronsted-Lowry bases are very important in acid-base chemistry as they react with acids to form salts and water. These reactions are called acid-base neutralization reactions and they form the basis of many chemical processes.
The Bronsted-Lowry theory is one of the most widely used acid-base theories in chemistry. According to this theory, an acid is a proton donor while a base is a proton acceptor. This definition is more general than the Arrhenius definition which defines an acid as a compound that produces hydrogen ions (H+) in solution and a base as a compound that produces hydroxide ions (OH-) in solution. The Bronsted-Lowry theory can also explain reactions involving molecules that do not contain hydroxide ions. For example, ammonia (NH3) is a Bronsted-Lowry base because it can accept a proton from an acid.
A Bronsted-Lowry base must contain an available lone pair of electrons in its formula. This lone pair of electrons is essential for the base to form a covalent bond to the H+ ion. The H+ ion is a proton that is donated by the acid. When the base accepts the proton, it becomes a conjugate acid. For example, NH3 accepts a proton from HCl to form NH4+ and Cl-. NH3 is the base while HCl is the acid. NH4+ is the conjugate acid of NH3 while Cl- is the conjugate base of HCl.
A Bronsted-Lowry base is a proton acceptor. A Bronsted-Lowry base must contain an available lone pair of electrons in its formula to form a(n) covalent bond to the H+.
Let's understand this in detail:
Bronsted-Lowry theory defines an acid as a substance that donates a proton (H+ ion) and a base as a substance that accepts a proton. Thus, a Bronsted-Lowry base is a proton acceptor.
For example, in the reaction between ammonia and water:
NH3 + H2O ↔ NH4+ + OH-
Ammonia is the base as it accepts the proton from the water molecule to form ammonium ion (NH4+).
A Bronsted-Lowry base must contain an available lone pair of electrons in its formula to form a covalent bond to the H+. This is because the H+ ion (proton) is attracted to the electrons in the base, forming a covalent bond.
The base needs to have a pair of electrons available to form this bond.
Learn more about Bronsted-Lowry base: In the Bronsted-Lowry Theory of acids and bases, an acid is this. https://brainly.com/question/15516010
#SPJ11
which of these interactions might form between two polar molecules? [select all that apply.] group of answer choices hydrogen bonding dispersion forces dipole-dipole interactions
The following interactions might form between two polar molecules Hydrogen bonding Dipole-dipole interactions.
Hydrogen bonding is a type of attractive interaction that forms between a hydrogen atom and a highly electronegative atom (such as nitrogen, oxygen, or fluorine) on another molecule. As a result, two polar molecules can form hydrogen bonds. Dipole-dipole interactions occur between polar molecules when the positive end of one molecule is attracted to the negative end of another molecule. Hence, dipole-dipole interactions can also form between two polar molecules. Dispersion forces occur in all types of molecules, but they are not unique to polar molecules. Therefore, dispersion forces cannot form between two polar molecules. Conclusively, hydrogen bonding and dipole-dipole interactions are the interactions that might form between two polar molecules.
Know more about polar molecules
https://brainly.com/question/1433127
#SPJ11
which of the following statements is the correct comparison of the midpoint and equivalence point rates of change of ph ph as a function of volume and its consequence for the careful determination of ph ph: the rate of change of ph ph vs. volume is greater at the midpoint than it is at the equivalence point leading to a greater uncertainty in the measurement of ph ph at the midpoint than at the equivalence point. the rate of change of ph ph vs. volume is greater at the equivalence point than it is at the midpoint leading to greater uncertainty in the measurement of ph ph at the equivalence point. the rate of change of ph ph vs. volume is greater at the midpoint than it is at the equivalence point leading to a greater uncertainty in the measurement of ph ph at the equivalence point than at the midpoint. the rate of change of ph ph vs. volume is greater at the equivalence point than it is at the midpoint leading to a greater uncertainty in the measurement of ph ph at the midpoint than at the equivalence point.
The statement "the rate of change of pH vs. volume is greater at the equivalence point than it is at the midpoint leading to greater uncertainty in the measurement of pH at the midpoint than at the equivalence point" is correct.
What is pH?
pH is a measure of the acidity or basicity (alkalinity) of a solution, which is determined by the concentration of hydrogen ions (H+) present in the solution. The pH scale ranges from 0 to 14, with a pH of 7 being neutral. A pH less than 7 indicates acidity, and a pH greater than 7 indicates basicity. The pH scale is logarithmic, meaning that a change of one unit represents a tenfold difference in acidity or basicity.
At the equivalence point, there is a rapid change in pH, whereas at the midpoint, the change in pH is not as drastic. This rapid change in pH at the equivalence point can lead to a greater uncertainty in the measurement of pH at the midpoint because it may be difficult to accurately determine the exact midpoint of the titration curve.
Learn more about pH from given link
https://brainly.com/question/172153
#SPJ1
which is the major product fomed when a mixture of ch3ch2oh and concentrated h2so4 is heated strongly?
Hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen. For the combustion reaction 2H2(g) + O2(g) = 2H2O(g) what is the likely magnitude of the equilibrium constant K? K < 10^-3 10^-3 10^3
The likely magnitude of the equilibrium constant K for the combustion reaction 2H₂(g) + O₂(g) = 2H₂O(g) is 10^3.
The equilibrium constant K is a measure of the extent of a chemical reaction at equilibrium, and it is given by the ratio of the products to the reactants, with each species raised to a power equal to its stoichiometric coefficient. For the combustion reaction of hydrogen and oxygen, the equilibrium constant K can be calculated as,
K = ([H₂O]^2) / ([H₂]^2[O₂])
Since the combustion reaction of hydrogen and oxygen is highly exothermic, the products (water molecules) are favored at equilibrium. This means that the concentration of water molecules will be much higher than the concentrations of hydrogen and oxygen molecules, leading to a large value of K. In this case, the likely magnitude of the equilibrium constant K is 10^3, indicating that the combustion reaction is highly favored at equilibrium.
To know more about hydrogen, here
brainly.com/question/14852040
#SPJ4
Which of the following molecules would have the highest boiling point?
a) hexane
b) octane
c) 2-propylpentane
d) 2-methylhexane
The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.
What is boiling point?The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.
The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.
Therefore, the correct option is D.
Learn more about Boiling point here:
https://brainly.com/question/25777663
#SPJ11
If only 1600 grams of CO2 are produced, what is the percent error of this reaction?
Answer:
Percent error = [(1600 g - 58.608 g) / 58.608 g] x 100%
Percent error = 2640.02%
Explanation:
To calculate the percent error of this reaction, we need to first calculate the theoretical yield of CO2 based on the balanced equation and then compare it to the actual yield obtained.
From the balanced equation:
C6H12O6 + 6O2 → 6CO2 + 6H2O
We can see that 1 mole of glucose (C6H12O6) produces 6 moles of carbon dioxide (CO2). The molar mass of glucose is 180 g/mol. So, to find the theoretical yield of CO2, we can use the following steps:
---Convert the mass of glucose to moles:
40 g / 180 g/mol = 0.222 mol
---Calculate the moles of CO2 produced:
0.222 mol glucose x 6 mol CO2/mol glucose = 1.332 mol CO2
---Convert the moles of CO2 to grams:
1.332 mol x 44 g/mol = 58.608 g CO2
So, the theoretical yield of CO2 is 58.608 grams.
Now we can calculate the percent error using the following formula:
Percent error = [(experimental value - theoretical value) / theoretical value] x 100%
Plugging in the values we have:
Percent error = [(1600 g - 58.608 g) / 58.608 g] x 100%
Percent error = 2640.02%
This means that the experimental value is significantly higher than the theoretical value, which indicates a large error in the experiment. It's important to identify and correct sources of error in experiments to improve the accuracy of results.
complete the lewis structure for this species: co2 e
nter the total number of valence electrons in the box.
valence electrons:
The Lewis structure for CO2 is:
O = C = O
The "e" notation typically refers to an electron, so it's unclear what is meant by "CO2 e". However, the total number of valence electrons for CO2 is 16.
the chelate effect is an important topic in inorganic chemistry. it involves the use of ligands with multiple binding areas to a metal center. below is a list of ligands that can be bound to a metal center. (a) describe what the chelate effect is and how it relates to thermodynamics, and (b) draw the ligands bound to your favorite metal ion and order the complexes with respect to the affinity of each ligand for the metal center (m). i. ethylenediamine (en) ii. iii. iv. edta
(a) The Chelate Effect :The chelate effect is an important topic in inorganic chemistry. It involves the use of ligands with multiple binding areas to a metal center.
The chelate effect is the thermodynamic enhancement of the stability of a metal ion complex through the formation of a ring of atoms that binds the metal ion.
The chelate effect is a phenomenon that involves the formation of a metal ion complex through the use of ligands that possess multiple binding sites.
When these ligands are bound to a metal ion, they form a ring of atoms that surround the metal ion, and this ring enhances the stability of the complex.
This effect is related to thermodynamics because it represents a decrease in the free energy of the system when the chelating ligand is bound to the metal center.
(b) Ethylenediamine (en) and EDTA bound to Metal ion, Both ethylenediamine and EDTA are chelating ligands that can bind to metal ions.
When these ligands are bound to a metal ion, they form a ring of atoms that surrounds the metal ion and enhances the stability of the complex.
The affinity of each ligand for the metal center depends on the size of the ring and the nature of the ligand.
EDTA is a larger ligand than ethylenediamine, and it has a greater affinity for metal ions than ethylenediamine.
Therefore, the EDTA complex would be more stable than the ethylenediamine complex.
. The order of the complexes with respect to the affinity of each ligand for the metal center is as follows: EDTA > Ethylenediamine.
For more information about chelate effect refer here
https://brainly.com/question/15242975?
#SPJ11
fermentation in certain types of yeast occurs in the ___________ of oxygen.
Fermentation in certain types of yeast occurs in the absence of oxygen.
Fermentation is an anaerobic metabolic process that occurs in the absence of oxygen, which converts sugar into cellular energy, primarily adenosine triphosphate (ATP), and produces carbon dioxide and alcohol as waste products. Fermentation is used in a variety of industrial and food production processes. Yeast, a type of fungus, is used to ferment carbohydrates and produce carbon dioxide and alcohol in bread baking, winemaking, and beer brewing. Lactobacilli bacteria are used in the production of yogurt and cheese by fermenting milk lactose.
There are two types of fermentation processes: alcoholic fermentation and lactic acid fermentation.
Alcoholic fermentation is a metabolic process that produces alcohol and carbon dioxide from carbohydrates, typically sugars. Yeast and certain bacteria are the most common types of organisms that undergo alcoholic fermentation. In lactic acid fermentation, the bacteria or yeast convert the sugar into lactic acid instead of ethanol. The lack of oxygen in the fermentation process is an essential factor. During fermentation, oxygen is not required as it would serve as a toxin to the fermenting yeast, which is why it happens in the absence of oxygen. Yeast obtains energy in the form of adenosine triphosphate (ATP) through anaerobic respiration when oxygen is absent.for such more question on Fermentation
https://brainly.com/question/11554005
#SPJ11
Structure of -a-D-maltose. Can someone help?
Answer:
-a-D-Maltose is a disaccharide composed of two glucose molecules linked together by a glycosidic bond. The two glucose molecules are linked together in an alpha-1,4-glycosidic bond, meaning that the anomeric carbon of the first glucose molecule is linked to the fourth carbon of the second glucose molecule. The two glucose molecules are also in the D-configuration, meaning that the hydroxyl group on the anomeric carbon of the first glucose molecule is on the right side when viewed from the bottom of the molecule.
Explanation:
please mark me brainliest
Rank the following elements by electron affinity, from most positive to most negative EA value. Rank from most positive to most negative. To rank items as equivalent, overlap them. (sodium, iodine, oxygen, arsenic, neon)
High electron affinity implies more easily accepts electrons because the increase in atomic size decrease the effective nuclear charge.
O < I < Ar < Na < Ne
The term Electron affinity is also designated as EA. It is defined as the change in energy of a neutral atom that is in the gaseous phase when an electron is added to the atom to form a negative ion. We can say the the neutral atom's likelihood of gaining an electron. It is the amount of energy released when an electron attaches to a neutral atom or molecule in the gaseous state to form an anion. We can simply say when an electron is added to the isolated gaseous atom energy is released that is more precisely known as the electron affinity. It is the energy required for the isolation of an electron from the singly charged gaseous negative ion.
To learn more about Electron Affinity
https://brainly.com/question/977718
#SPJ4
which of the following metals will react with aqueous alcl3 to form elemental al? select all that apply. group of answer choices none of these metals will react to form elemental al na fe mg mn
The metals that will react with aqueous [tex]AlCl_3[/tex] to form elemental Al are Na and Fe.
A single displacement reaction occurs when aqueous [tex]AlCl_3[/tex] reacts with Na or Fe to form elemental Al.
The displacement reaction occurs in the following way:
2 [tex]AlCl_3[/tex] + 3 Na ⇒ 3 NaCl + 2 [tex]Al_2[/tex]
[tex]AlCl_3[/tex] + 3 Fe ⇒ 3 [tex] FeCl_2[/tex] + 2 Al
The reaction between aqueous [tex]AlCl_3[/tex] and Mg or Mn does not result in the formation of elemental Al. As a result, both Mg and Mn will not respond to form elemental Al with aqueous [tex]AlCl_3[/tex]
As a result, the appropriate response is to select "Na and Fe." Therefore, Na and Fe react with aqueous [tex]AlCl_3[/tex] to form elemental Al.
To know more about Metals refer here :
https://brainly.com/question/26672329
#SPJ11
The gas will happen to a gas brought to extremely low temperatures?
A. The gas will become liquid
B. The gas will increase in volume
C. The gas will load molecules
D. The gas will remain a gas
Answer:
A - The gas will become liquid.
GIVING BRAINLIEST AND THANKS!
Can anyone help with this worksheet?
There are three mole equalities. They are: 1 mol = 6.02 x 1023 particles 1 mol = molar mass in g (periodic table) 1 mol = 22.4 L for a gas at STP
How many moles are there in 2750 ml of Hydrogen?
How many atoms are there in 27.8 L of Oxygen.?
How many atoms are in 0.62 mole of water?
Calculate the number of moles of hydrogen are in 1.7 x 1022atoms
Calculate the number of atoms in 2500 L of water
Calculate the mass of 2.5mol 2NH3
Given the following balanced chemical equation:
C5H12+8O2→5CO2+6H2O
How many moles of H2O can be formed if 0.0652 mol of C5H12 were to react?
Balance the following unbalanced equation and determine how many moles of H2O are produced when 1.65 mol of NH3 react:
NH3+O2→N2+H2O
8. How many moles of oxygen react with hydrogen to produce 27.6 mol of H2O
? Unbalanced: H2 + O2 → H2O balanced equation and solve.
9. If we have 3.59 mol of Fe2O3 , how many grams of SO3 can react with it?
Fe2O3 + 3SO3 —------> Fe2(SO4)3
1. How many moles of magnesium is 3.01 x 1022 atoms of magnesium?
2. How many molecules are there in 4.00 moles of glucose, C6H12O6
?
3. How many moles are 1.20 x 1025 atoms of phosphorous?
4. How many atoms are in 0.750 moles of zinc?
5. How many molecules are in 0.400 moles of N2O5?
Mole-Mass Conversions
1. How many moles in 28 grams of CO2?
2. What is the mass of 5 moles of Fe2O3 ?
3. Find the number of moles of argon in 452 g of argon.
4. Find the grams in 1.26 x 10-4 mol of HC2H3O2.
5. Find the mass in 2.6 mol of lithium bromide.
Mole-Volume Conversions
1. Determine the volume, in liters, occupied by 0.030 moles of a gas at STP.
2. How many moles of argon atoms are present in 11.2 L of argon gas at STP?
3. What is the volume of 0.05 mol of neon gas at STP?
There are 0.123 moles of Hydrogen in 2750 mL of Hydrogen; There are 1.51 x 10²⁴ Oxygen atoms in 27.8 L of Oxygen ; There are 1.11 x 10²⁴ atoms in 0.62 mole of water; There are 0.282 moles of hydrogen in 1.7 x 10²² atoms : There are approximately 2.02 x 10²⁶ atoms in 2500 L water. mass of 2.5 mol of NH3 is 42.57 g.
What is a chemical equation?Symbolic representation of chemical reaction in form of symbols and chemical formulas is called balanced chemical equation.
1 mol H2 = 22.4 L H2
x mol H2 = 2.75 L H2
x = 2.75 L H2 / 22.4 L H2
x = 0.123 mol H2
Therefore, there are 0.123 moles of Hydrogen in 2750 mL of Hydrogen.
1 mol O2 = 22.4 L O2
x mol O2 = 27.8 L O2
x = 27.8 L O2 / 22.4 L O2
x = 1.24 mol O2
1 mol O2 = 6.02 x 10²³ O2 molecules
1.24 mol O2 = 1.24 x 6.02 x 10²³ O2 molecules
1.24 mol O2 = 7.53 x 10²³ O2 molecules
7.53 x 10²³ O2 molecules x 2 atoms O per molecule = 1.51 x 10²⁴ Oxygen atoms
Therefore, there are 1.51 x 10²⁴ Oxygen atoms in 27.8 L of Oxygen.
As 1 mole H2O is 6.02 x 10²³ H2O molecules
and 1 H2O molecule=2 H atoms+1 O atom= 3 atoms
0.62 mol H2O x 6.02 x 10²³ H2O molecules/mol x 3 atoms/H2O molecule = 1.11 x 10²⁴ atoms
Therefore, there are 1.11 x 10²⁴ atoms in 0.62 mole of water.
1 mol H2= 6.02 x 10²³ H2 molecules
1.7 x 10²² H2 molecules / 6.02 x 10²³ H2 molecules per mole = x moles H2
x =0.282 mol H2
Therefore, there are 0.282 moles of hydrogen in 1.7 x 10²² atoms.
2500 L of water / 22.4 L/mol = 111.6 mol of water
111.6 mol of water x 6.02 x 10²³ molecules/mol = 6.72 x 10²⁵ molecules of water
6.72 x 10²⁵ molecules of water x 3 atoms/molecule = 2.02 x 10²⁶ atoms of hydrogen and oxygen in 2500 L water.
Therefore, there are approximately 2.02 x 10²⁶ atoms in 2500 L water.
As, mass is number of moles x molar mass
= 2.5 mol NH3 x 17.03 g/mol NH3
mass = 42.57 g
Therefore, mass of 2.5 mol of NH3 is 42.57 g.
C5H12 + 8O2 → 5CO2 + 6H2O
0.0652 mol C5H12 x 6 mol H2O/1 mol C5H12 = 0.3912 mol H2O
And therefore, 0.3912 mol H2O is formed if 0.0652 mol of C5H12 react.
Balance equation: NH3 + 2O2 → N2 + 3H2O
1.65 mol NH3 x 3 mol H2O/1 mol NH3 = 4.95 mol H2O
Therefore, 4.95 mol of H2O are produced when 1.65 mol of NH3 reacts.
From balanced equation: 2H2 + O2 → 2H2O
So, 27.6 mol H2Ox 1 mol O2/2 mol H2O=13.8 mol O2
Therefore, 13.8 mol of O2 react with hydrogen to produce 27.6 mol of H2O.
Using balanced equation: Fe2O3 + 3SO3 → Fe2(SO4)3
3.59 mol Fe2O3 x 3 mol SO3/1 mol Fe2O3 = 10.77 mol SO3
10.77 mol SO3 x 80.06 g/mol = 862.6 g SO3
Therefore, 862.6 g of SO3 can react with 3.59 mol of Fe2O3.
3.01 x 10²² atoms of Mg / 6.02 x 10^23 atoms/mol = 0.050 mol of Mg
Therefore, 3.01 x 10^22 atoms of Mg is equal to 0.050 mol of Mg.
1 mol of glucose (C6H12O6) = 6.02 x 10²³ molecules
Therefore: 4.00 mol of glucose x 6.02 x 10²³ molecules/mol = 2.41 x 10²⁴ molecules of glucose
Therefore, there are 2.41 x 10²⁴ molecules in 4.00 moles of glucose.
1 mol of phosphorous = 6.02 x 10²³ atoms
Therefore: 1.20 x 10²⁵ atoms of phosphorous / 6.02 x 10²³ atoms/mol = 19.9 mol of phosphorous
Therefore, 1.20 x 10²⁵ atoms of phosphorous is equal to 19.9 mol of phosphorous.
1 mol of zinc = 6.02 x 10²³ atoms
Therefore: 0.750 mol of zinc x 6.02 x 10²³ atoms/mol = 4.52 x 10²³ atoms of zinc
Therefore, there are 4.52 x 10²³ atoms in 0.750 moles of zinc.
1 mol of N2O5 = 6.02 x 10²³ molecules
Therefore: 0.400 mol of N2O5 x 6.02 x 10²³ molecules/mol = 2.41 x 10²³ molecules of N2O5
Therefore, there are 2.41 x 10²³ molecules in 0.400 moles of N2O5.
Molar mass of CO2 is 12.01 + 2(16.00) = 44.01 g/mol.
moles = mass/molar mass = 28 g/44.01 g/mol = 0.636 mol
Therefore, there are 0.636 moles in 28 grams of CO2.
Molar mass of Fe2O3 is 2(55.85) + 3(16.00) = 159.69 g/mol.
mass = moles x molar mass = 5 mol x 159.69 g/mol = 798.45 g
Therefore, mass of 5 moles of Fe2O3 is 798.45 grams.
Molar mass of Ar is 39.95 g/mol.
moles = mass/molar mass = 452 g/39.95 g/mol = 11.3 mol
Therefore, there are 11.3 moles of Ar in 452 grams of Ar.
Molar mass of HC2H3O2 is 1(1.01) + 2(12.01) + 2(1.01) + 2(16.00) = 60.05 g/mol.
mass = moles x molar mass = 1.26 x 10⁻⁴ mol x 60.05 g/mol = 0.00756 g
Therefore, there are 0.00756 grams in 1.26 x 10⁻⁴ mol of HC2H3O2.
Molar mass of LiBr is 6.94 + 79.90 = 86.84 g/mol.
mass = moles x molar mass = 2.6 mol x 86.84 g/mol = 225.784 g
Therefore, mass in 2.6 mol of LiBr is 225.784 grams.
volume = moles x 22.4 L/mol = 0.030 mol x 22.4 L/mol = 0.672 L
Therefore, 0.030 moles of a gas at STP occupies volume of 0.672 liters.
moles = volume/22.4 L/mol = 11.2 L/22.4 L/mol = 0.5 mol
Therefore, 0.5 moles of argon atoms present in 11.2 L of argon gas at STP.
Therefore, to find volume of 0.05 mol of neon gas at STP:
volume = moles x 22.4 L/mol = 0.05 mol x 22.4 L/mol = 1.12 L
Therefore, 0.05 mol of neon gas at STP occupies volume of 1.12 liters.
To know more about balanced chemical equation, refer
https://brainly.com/question/11904811
#SPJ1
The ability of an atom during bond formation to attract electrons from its bonding partner
-The higher it is, the stronger the atom's electron attracting ability
-Nonmetals are higher (gain electrons while metals lose them)
-Electronegativities increase from left to right across periodic table rows and decrease as you move down a column
-Fluorine is the most electronegative element, Francium is the least
The ability of an atom during bond formation to attract electrons from its bonding partner is called electronegativity. The higher the electronegativity of an atom, the stronger its electron-attracting ability.
Let's understand this in detail:
Electronegativity is the power of an atom or molecule to attract electrons to itself in a covalent bond. An atom's electronegativity is influenced by its atomic number, the number of protons in the atom's nucleus.
The electronegativity of an atom is higher when its valence shell is nearly empty or nearly full.
Electronegativity increases from left to right across a period because of the increasing effective nuclear charge, which is the force of attraction between the positively charged atomic nucleus and the negatively charged electrons.
Electronegativity decreases down a group due to the increasing distance between the valence electrons and the positively charged nucleus.
Francium has the lowest electronegativity, while fluorine has the highest electronegativity.
Learn more about electronegativity: What is electronegativity and how can it be used in determining the polarity of nonpolar? https://brainly.com/question/18258838
#SPJ11
What is the reason for KOH reacting with 1-propanol? A strong bases react with nucleophiles B 1-propanol contains a good leaving group C KOH is a good electrophile and 1-propanol is a good nucleophile D OH groups react with each other E 1-propanol contains proton
KOH reacts with 1-propanol because 1-propanol is a nucleophile and KOH is a strong base; strong bases react with nucleophiles. Hence, a nucleophilic substitution reaction is what causes the reaction to happen.
Strong base KOH may function as a nucleophile in a chemical process and includes the hydroxide ion, OH-. The hydroxyl (-OH) functional group in the alcohol 1-propanol makes it a potent nucleophile. When 1-propanol is combined with KOH, the hydroxide ion of KOH attacks the carbon atom, which causes the 1-propanol hydroxyl group to be replaced by a new OH- ion from KOH. This reaction is referred to as a nucleophilic substitution reaction because the leaving group is replaced by the nucleophile (OH- ion) (the hydroxyl group of 1-propanol). This reaction creates potassium propoxide, a brand-new substance.
learn more about 1-propanol here:
https://brainly.com/question/15062961
#SPJ4
How many kilograms are there in 81. 2 Mg? Express your answer in scientific notation
As there are 1,000,000 kg in 1 Mg, we must multiply by 1,000,000 to convert from Mg (megagrams) to kilogrammes. Therefore:
8.12 × 107 kg or 81.2 Mg is equal to 81.2 x 1,000,000 kg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
, I apologize for my mistake in the previous response. The conversion from Mg to kg is indeed done by multiplying by 1,000,000. Thank you for providing the correct calculation and explanation. The answer is:
81.2 Mg = 81.2 x 1,000,000 kg = 8.12 x 10^7 kg
Expressed in scientific notation, there are 8.12 x 10^7 kilograms in 81.2 Mg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
8.12 x 107 kilos, or in scientific notation, are contained in 81.2 Mg.
learn more about kilogrammes here:
https://brainly.com/question/5305768
#SPJ4
Answer the following questions for 1,3,5-hexatriene, the conjugated triene containing six carbons. 1) Which p molecular orbitals belong in the following categories? Select all that apply A) Bonding: p 6*, p 5*, p 4*, p 3 , p 2, p1 B)Antibonding:p 6*, p 5*, p 4*, p 3 , p 2, p1 2) Select which p molecular orbital is the: A) Homo: p 6*, p 5*, p 4*, p 3 , p 2, p1 B) Lumo:p 6*, p 5*, p 4*, p 3 , p 2, p1
The categories for the p molecular orbitals are:
Bonding: p3, p2, and p1.
B) Antibonding (p 6, p 5, and p 4)
The p orbitals of the carbon atoms engage in delocalized pi-electron bonding in a conjugated system like 1,3,5-hexatriene. Although the antibonding molecular orbitals (ABMOs) are created by destructive interference, the bonding molecular orbitals (BMOs) are created by constructive interference of the p orbitals. There are three BMOs and three ABMOs in this situation.The Lumo is the lowest vacant molecular orbital, whereas the Homo is the highest occupied molecular orbital. The occupied molecule orbital with the highest energy is the HOMO, while the molecular orbital with the lowest energy is the LUMO. The HOMO and LUMO play a crucial role in conjugated systems because they are engaged in electron transitions that result in UV-visible spectroscopic characteristics like absorption and emission wavelengths.
learn more about conjugated system here:
https://brainly.com/question/30597949
#SPJ4
which example is an exothermic reaction? responses dissolving sugar in water dissolving sugar in water melting ice melting ice dissolving ammonium nitrate in water to cool the water dissolving ammonium nitrate in water to cool the water condensation
The correct option is dissolving ammonium nitrate in water to cool the water.
Among the given options, the example of an exothermic reaction is dissolving ammonium nitrate in water to cool the water.
Exothermic reactions are chemical reactions that release heat energy into the surroundings. As a result, the products have less energy than the reactants. Dissolving ammonium nitrate in water to cool the water is a good example of an exothermic reaction because it releases heat energy and cools down the surrounding water.
When ammonium nitrate dissolves in water, it releases heat, causing the temperature of the water to decrease. The reaction is exothermic because it releases heat to the surroundings. Dissolving sugar in water and melting ice are examples of endothermic reactions because they absorb heat energy from the surroundings.
Therefore, the correct answer is the option of dissolving ammonium nitrate in water to cool the water.
To learn more about exothermic reactions refer - https://brainly.com/question/10373907
#SPJ11
Consider the reaction NH4HS(s) ? NH3(g) + H2S(g)At a certain temperature, Kc = 8.5x10-3. A reaction mixture at this temperature containing solid NH4HS has [NH3] = 0.166 M and [H2S] 0.166 M. Will more of the solid form or will some of the existing solid decompose as equilibrium is reached?
The given equilibrium reaction is: NH4HS(s) ⇌ NH3(g) + H2S(g)
What is equilibrium reaction?
An equilibrium reaction is a reversible chemical reaction in which the forward and backward reactions occur at equal rates. At equilibrium, the concentrations of the reactants and products remain constant, and the rate of the forward reaction is equal to the rate of the backward reaction. In other words, the system is in a state of dynamic balance, where the concentrations of the reactants and products do not change over time.
The equilibrium constant, Kc, is given as 8.5 x 10^-3 at a certain temperature. At equilibrium, the concentrations of NH3 and H2S are given as [NH3] = 0.166 M and [H2S] = 0.166 M. We are asked to determine whether more of the solid NH4HS will form or whether some of the existing solid will decompose to reach equilibrium.
To solve this problem, we can first use the equilibrium constant expression to calculate the equilibrium concentration of NH4HS:
Kc = ([NH3] x [H2S]) / [NH4HS]
8.5 x 10^-3 = (0.166 M x 0.166 M) / [NH4HS]
[NH4HS] = (0.166 M x 0.166 M) / 8.5 x 10^-3
[NH4HS] = 3.25 M
The calculated concentration of NH4HS at equilibrium is 3.25 M, which is greater than the initial concentration of NH4HS. This indicates that more of the solid NH4HS will dissolve to form NH3 and H2S, rather than some of the existing solid decomposing. Therefore, the system will shift towards the product side to consume more NH4HS and form additional NH3 and H2S.
To know more about chemical compound visit :-
https://brainly.com/question/26487468
#SPJ1
Explain ow accommodating and co
llaborating might resolve conflict and contribute to harmonious relationships during your grade 12 academic year
Accommodating involves one party sacrificing their own interests to satisfy the other party's needs while collaborating involves both parties working together to find a mutually beneficial solution.
Conflicts can be quickly resolved and positive relationships between the parties involved by being accommodating. For instance, one student might decide to abandon their idea in favor of the other student's idea if two students in a group project have opposing opinions on how to approach a task. This can help the group get along better and avoid conflicts.
On the other hand, working together can result in creative answers that benefit both parties. When two people work together, they combine their distinctive perspectives and ideas, which can result in innovative solutions that neither party would have thought of on their own. For instance, if two students disagree on how to complete a group assignment, they can work together and combine their ideas to come up with a more thorough and workable solution.
Learn more about Accommodating
brainly.com/question/30492472
#SPJ4
A chemist adds a strip of magnesium metal to a basic solution. Which of the following best describes the reaction that would occur when the magnesium metal is added to the basic solution? Hint: Will Hor OH be more prevalent in an acidic solution? In a basic solution? You might also find it helpful to reference Tables E.1 and E.2 in the back of your lab manual. A) No reaction. The overall moles of all species stays the same. Reaction producing a white precipitate of Mg(OH)2. B) This causes the overall moles of Mg2+ has decreased. C) Reaction producing aqueous Mg2cations. This causes the overall moles of Mg2to increase.
Answer:
When a chemist adds a strip of magnesium metal to a basic solution, the reaction that occurs is the reaction producing a white precipitate of Mg(OH)2. The best answer option is A. No reaction.
Explanation:
The overall moles of all species stay the same. The chemical reaction that occurs when magnesium is added to a basic solution is represented as follows:
Mg + 2OH- → Mg(OH)2↓ + H2↑
Where Mg is magnesium metal and OH- is hydroxide ion. In this reaction, magnesium reacts with hydroxide ions to produce magnesium hydroxide and hydrogen gas. Magnesium hydroxide is a white precipitate and will form immediately as soon as magnesium is added to the basic solution.
It is insoluble in water and thus, separates from the solution in the form of a white precipitate. Therefore, the correct answer is option A. No reaction. The overall moles of all species stay the same.
To know more about Mg(OH)2 refer here: https://brainly.com/question/1978000#
#SPJ11