The question is if the atmospheric pressure is 0. 993 atm and the height of the water column at the end of the experiment is 16. 5cm, what is the total pressure of the gas in the eudiometer? and if the total pressure is at 20,5 degree centimeter is 580 mmhg. What is the partial pressure of the h2 gas

The total molar concentration of ions in a 0.90 m Al2(SO4)3 solution is 1.8 M. Option (a).

This can be calculated by first determining the molar mass of Al2(SO4)3, which is 342.14 g/mol.

Then, divide the given concentration of 0.90 m by the molar mass of Al2(SO4)3, resulting in 0.0026 moles of Al2(SO4)3 per liter of solution.

The total molar concentration of ions, multiply 0.0026 moles by the ionization factor, which is 6 in the case of Al2(SO4)3.

Therefore, the result is 1.8 M, which is the total molar concentration of ions in a 0.90 m Al2(SO4)3 solution.

to know more about molar concentration refer here:

https://brainly.com/question/29429999#

#SPJ11

1. The approximate bond angle for a molecule with an octahedral shape  is 90 degree. so, option (e) is correct.

2. The hybridization of the orbitals on carbon in C2H4 is SP2 hybridization.

The octahedral shape of molecules is defined as the shape of molecules where six atoms or ligands or groups of atoms are arranged in a systematic way around a central dogma or atom. The Octahedral Shape of Molecules contains eight faces and the band angel is 90 degree. It consists of two square pyramids back to back each square pyramid with four faces.

In sp² hybridization is defined as the hybridization where one s orbital and two p orbitals hybridize to form three sp² orbitals each of this consisting of 33% s character and 67% p character. SP2 hybridization is required whenever an atom is surrounded by three groups of electrons.

To learn more about octahedral shape

https://brainly.com/question/30160815

#SPJ4

The complete question is,

1. Give the approximate bond angle for a molecule with an octahedral shape.

a. 109.5°

b. 180°

c. 120

d. 105°

e. 90°

2. What is the hybridization of the orbitals on carbon in C2H4?

The compound that reacts in the atmosphere to produce aerosols which reduces the amounts of solar radiation absorbed by the earth's surface is SO₂. The correct option is B.

SO₂ reacts with atmospheric water and oxygen to produce aerosols such as sulfuric acid and sulfate aerosols that scatter sunlight and, therefore, reduce the amount of solar radiation that reaches the Earth's surface. Because of this property, SO₂ has a major influence on the Earth's climate and atmosphere. It is harmful to the environment and is generated by human activities such as the burning of fossil fuels like coal and petroleum, as well as volcanoes, and geothermal springs.

Acid rain, global warming, and respiratory illnesses are all caused by this gas. As a result, SO₂ emission control measures are necessary to protect the environment and human health.

Therefore, the correct option is B.

Read more about atmosphere here:

https://brainly.com/question/24925283

#SPJ11

A magnetic force is what moves the compass needle when it is in close proximity to a particular kind of metal. This is so because the magnetic fields of the metal item and the compass needle interact to create a force.

Permanent magnets, electric currents, and various types of metals may all be surrounded by magnetic fields, which are created by moving charges like electrons. The compass needle will move or align itself with the magnetic field lines when a magnetic field is applied to a magnetic substance, such as that material.If the compass is placed next to a metal item, the metal must likewise have a magnetic field or be able to create one when exposed to one. The compass needle moves as a result of the force created by the interaction of the magnetic fields, revealing the existence and direction of the magnetic field generated by the metal item.

learn more about compass needle here:

https://brainly.com/question/2577109

#SPJ4

Ozone is considered harmful in the troposphere but beneficial in the stratosphere. It is a pollutant in the troposphere but protects against UV radiation in the stratosphere.

In the stratosphere, ozone is thought to be advantageous but damaging in the troposphere. Ozone is a pollutant and a component of smog in the troposphere, which can harm crops and cause respiratory issues in people. Ozone, however, plays a crucial role in the stratosphere because it filters and absorbs dangerous UV light from the sun. This aids in shielding Earth's life from the negative effects of UV radiation. Lead, nitrogen oxides, and sulfur dioxide are also harmful in the stratosphere. They may all cause air pollution, acid rain, and other environmental issues and are all bad for the troposphere and stratosphere.

learn more about troposphere here:

https://brainly.com/question/13497783

#SPJ4

Answer:

Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.

To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.

If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.

To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.

Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.

Sulfur and oxygen are the reactants in this process, and sulfur dioxide is the end result. Sulfur + Oxygen = Sulfur Dioxide is the word equation for this process.

Chemical equation writing. Sulfur trioxide is created when sulfur dioxide and oxygen are combined. Sulfur trioxide, often known as SO3, is the result of the reaction between sulfur dioxide and oxygen (SO2+O2).

This reaction is a combination reaction, which is the type of chemical reaction it is. Balanced Approaches: S and O2 combine to generate SO2 in this reaction of combination. Make sure the number of atoms on either side of the equation is equal by carefully counting them up.

To know more about reactants visit:-

https://brainly.com/question/17096236

#SPJ1

Answer:

2,1,1  

Explanation:

The number of moles of FADH₂ required to produce a proton gradient is 0.17 mol. This can be calculated through the free energy and potential difference. Thus, the correct option is D.

There are 6.022 × 10²³ protons per mole of H⁺. Therefore, one mole of H⁺ contains 1 mole of protons.

The change in potential between FADH₂ and O₂ is: ΔE°' = E°'(O₂) - E°'(FADH₂)

ΔE°' = 0.81 - 0.10

ΔE°' = 0.71 V

ΔG for electron transfer from FADH₂ to O₂ is: ΔG°' = -nFΔE°'

where, n = number of electrons, F = Faraday's constant (96,500 J/V), and ΔE°' is the change in potential between the two half-cells.

We know that n = 2 (since FADH₂ transfers two electrons to O₂).

ΔG°' = -2 × (96,500) × (0.71)

ΔG°' = -137,860 J/mol

ΔG° = -nFΔΨ

where, n = number of protons, F = Faraday's constant (96,500 J/V), and ΔΨ is the change in potential across the membrane. We know that n = 1 (since we want to pump one mole of H⁺ across the membrane).

ΔΨ = ΔG°/(nF)

ΔΨ = (-137,860)/(1 × 96,500)

ΔΨ = -1.43 V

ΔG = ΔG° + RTlnQ

where, R = gas constant (8.31 J/molK), T = temperature in Kelvin (298 K), and Q = reaction quotient.

Since the reaction is at standard conditions, Q = 1 (since all the reactants and products are in their standard states).

ΔG = ΔG°

ΔG = -137,860 J/mol

ΔG = -137.86 kJ/mol

23.3 kJ/mol = n × (1.43 V)

n = 0.17

Therefore, 0.17 mol of FADH₂ is required.

Therefore, the correct option is D.

Learn more about Potential difference here:

https://brainly.com/question/9358420

#SPJ11

Finding the mass of NaOH in 0.250 g of the solution is the first step.

The mass of NaOH in the solution, assuming we have 100 g of the solution (because the concentration is 25.00% by mass), would be 25.00 g.

To calculate the mass of NaOH in 0.250 g of the solution, we can use a proportion:

25 g of NaOH per 100 g of solution is x g of NaOH for 0.250 g of solution.

In order to find x, we solve for it as follows: x = (0.250 g solution) * (25.00 g NaOH/100 g solution) = 0.0625 g NaOH

As a result, 0.250 g of the solution contains 0.0625 g of NaOH.

The mass of NaOH that must be added to the solution in order to raise the concentration to 30.00% by mass is then determined:

If the original solution weighs 100 g, then the mass of NaOH that is present in the solution is 25 g (because the concentration is 25.00% by mass).

learn more about NaOH in 0.250 g of the solution here:

https://brainly.com/question/2660760

#SPJ4

The acid-base reactants for this neutralization reaction are LiOH and HNO3.

Explanation : Acid-base reactants for this neutralization reaction are LiOH and HNO3.The reaction between an acid and a base to form a salt and water is known as a neutralization reaction. It is an exothermic reaction because heat is generated when the acid and base are mixed. The products of the reaction are a salt and water (H2O).The neutralization reaction produces H2O and LiNO3. The neutralization reaction between LiOH and HNO3 forms LiNO3 and H2O as products.What is LiOH?LiOH is an alkali compound that is a base with a pH greater than 7. It is commonly known as lithium hydroxide. It is a highly corrosive substance that is used in a variety of industrial processes. It is used in the manufacture of lithium batteries, as well as in rocket fuel, in the purification of natural gas, and as a carbon dioxide absorbent.What is HNO3?Nitric acid is also known as aqua fortis, and it is a highly corrosive mineral acid. It is a potent oxidizing agent that is highly reactive with metals, creating flammable gases upon reaction. It is primarily used in the manufacture of fertilizers, explosives, and various organic chemicals. Nitric acid is a highly corrosive and toxic substance, and proper care should be taken when working with it.

For more such questions on Acid Base

https://brainly.com/question/23008798

#SPJ11

The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.

Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,

            AB → A+B.

This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .

To learn more about Decomposition reaction

https://brainly.com/question/16728382

#SPJ4

a. The number of moles of CO (g) in the container will remain the same after the temperature of the equilibrium mixture is increased at constant volume. This is because the change in temperature will not alter the equilibrium concentration of the substances involved, and so the number of moles of CO (g) will remain the same.

b. The number of moles of CO (g) in the container will decrease after the volume of the container is decreased at a constant temperature. This is because decreasing the volume of the container will decrease the number of substances present in the system, and thus decrease the number of moles of CO (g).

c. The number of moles of CO (g) in the container will remain the same after the graphite pellets are pulverized. This is because pulverizing the graphite pellets does not change the number of moles of CO (g) in the container, and thus the number of moles of CO (g) will remain the same.

Read more about the topic of equilibrium:

https://brainly.com/question/517289

#SPJ11

Magnesium hydroxide and aluminum hydroxide have different chemical behaviors due to differences in their atomic structure and molecular structure.

Magnesium hydroxide is a colorless, crystalline compound with the chemical formula Mg(OH)2, while aluminum hydroxide is a white, crystalline compound. Magnesium hydroxide Mg[tex](OH)_2[/tex] has a polymeric structure and is slightly soluble in water, while aluminum hydroxide Al[tex](OH)_3[/tex] is an ionic compound that is highly soluble in water.

When mixed with water, the magnesium hydroxide reacts according to the following equation:

Mg[tex](OH)_2[/tex]+ [tex]H_2O[/tex] →[tex]Mg_2[/tex]+ + 2[tex]OH^-[/tex]

The aluminum hydroxide reacts according to the equation:

Al [tex](OH)_3[/tex]+ [tex]H_2O[/tex] → [tex]Al_3[/tex]+ + 3[tex]OH^-[/tex]

These equations show that magnesium hydroxide releases one hydroxide ion, while aluminum hydroxide releases three hydroxide ions.

Hence ,  This difference in hydroxide ion release is why magnesium hydroxide and aluminum hydroxide have different chemical behaviors.

To know more about Atomic structure refer here :

https://brainly.com/question/14214017

#SPJ11

RNA polymerase initiates transcription in E. coli by recognizing the promoter region of a gene.

During transcription initiation, RNA polymerase binds to the DNA at the promoter region of a gene, which signals the start of transcription. The DNA strand unwinds, and the RNA polymerase then moves along the DNA strand, adding nucleotides to the growing RNA molecule.

RNA polymerase contains a helicase-like domain that uses ATP hydrolysis to unwind the double-stranded DNA at the initiation site. The enzyme then separates the two strands of the DNA molecule to create a transcription bubble. This bubble expands in both directions, allowing the RNA polymerase to continue moving along the DNA strand and synthesizing RNA.

RNA polymerase then forms a transcription initiation complex by binding to a DNA promoter sequence, and the transcription process begins. The transcription initiation complex consists of the RNA polymerase enzyme, the promoter region of the gene being transcribed, and various transcription factors that help regulate the process.

Once the transcription initiation complex is formed, RNA polymerase begins synthesizing a new RNA molecule by reading the DNA template strand and adding nucleotides in the appropriate sequence. A number of transcription factors and regulatory proteins are also involved in the initiation of transcription in E. coli. These factors can influence the activity of RNA polymerase and control the expression of specific genes.

For example, some transcription factors bind to specific promoter sequences to enhance or repress transcription, while others regulate the activity of RNA polymerase by modifying its structure or modifying the DNA template strand.

Overall, the process of transcription initiation in E. coli is complex and tightly regulated and involves a number of factors working together to ensure accurate and efficient gene expression.

To know more about transcription, refer here:

https://brainly.com/question/14136689#

#SPJ11

RNA polymerase initiates transcription in E. coli by recognizing and binding to specific promoter sequences in the DNA molecule.

In E. coli, RNA polymerase initiates transcription by recognizing and binding to specific promoter sequences in the DNA molecule. This process involves a number of different steps, including the following:Binding of RNA polymerase to the promoter region of the DNA molecule: RNA polymerase binds to a specific region of the DNA molecule known as the promoter, which is located upstream of the gene that is to be transcribed. This binding is facilitated by a number of different factors, including specific nucleotide sequences within the promoter region and regulatory proteins that help to stabilize the RNA polymerase-DNA complex.

Unwinding of the DNA molecule: Once RNA polymerase is bound to the promoter region of the DNA molecule, it begins to unwind the double helix, creating a small bubble or “open complex” in the DNA. This open complex is critical for the initiation of transcription, as it allows the RNA polymerase enzyme to access the template strand of the DNA molecule and begin synthesizing RNA from the template strand. Elongation of the RNA molecule: Once the RNA polymerase enzyme has formed the open complex and accessed the template strand of the DNA molecule, it begins to synthesize an RNA molecule that is complementary to the template strand.

This process involves the addition of individual nucleotides to the growing RNA molecule, with the RNA polymerase enzyme moving along the template strand of the DNA molecule in a 5′ to 3′ direction. This process continues until the RNA polymerase enzyme reaches the end of the gene and the transcription is terminated.

To know more about E. coli please visit :

https://brainly.com/question/30511854

#SPJ11

The enzyme pyruvate dehydrogenase generates 1 acetyl coA, 2 NADH, and 1 CO2 molecule.

Pyruvate dehydrogenase (PDH) is a complex enzyme located in the mitochondria of eukaryotic cells and is responsible for catalyzing the oxidation of pyruvate to Acetyl-CoA. This oxidation is the first step of the Krebs Cycle, the metabolic pathway by which most organisms obtain energy from carbohydrates.

During this oxidation, PDH converts 1 molecule of pyruvate into 1 molecule of Acetyl-CoA, 2 molecules of NADH, and 1 molecule of CO2.
PDH is composed of 3 components, each with its own unique function: E1, E2, and E3.

E1 is responsible for the decarboxylation of pyruvate, producing CO2.

E2 then forms the thioester bond between acetyl and CoA, producing acetyl-CoA. Finally,

E3 oxidizes NADH, producing 2 molecules of NADH.

This series of reactions allows for the energy stored in carbohydrates to be efficiently released, providing the cells with the energy they need to function. This is why the enzyme PDH is so important for the survival of most organisms.

for such more question on pyruvate dehydrogenase

https://brainly.com/question/29997944

#SPJ11

The mass of silver bromide formed when 35.5 ml of 0.184 m silver nitrate is treated with an excess of hydrobromic acid is 9.89 g.

When 35.5 mL of 0.184 M silver nitrate is treated with an excess of hydrobromic acid, the reaction forms silver bromide and a salt containing bromide ions. The mass of silver bromide that is formed can be calculated using the following equation:

Mass = Concentration x Volume x Molecular Weight

Where:

Therefore, the mass of silver bromide formed is:

Mass = 0.184 x 35.5 x 187.81 = 9.89 g

Learn more about acids: https://brainly.com/question/25148363

#SPJ11

The oscillation frequency of an electric dipole in a uniform electric field can be expressed as:

f = (1/2π) x (1/√(I/2P x E))

Oscillation can be defined simply as a variation that is repetitive (in time) of measures about a value which is central, or a value between two or more accounts of different states. The oscillation occurs not only in the mechanical system but it also occurs in dynamic systems areas of every scientific founding.

The oscillation frequency is given by

f = (1/2π) x (1/√(I/2P x E))

where:

This expression assumes small amplitude oscillations and is derived from the equation of motion of a simple harmonic oscillator. In this case, the torque on the dipole due to the electric field is proportional to the displacement of the dipole from its equilibrium position, and the restoring torque due to the rotational inertia of the dipole is proportional to the angular displacement. By equating these torques, we get the equation of motion of the dipole in terms of the oscillation frequency, rotational inertia, dipole moment, and electric field.

Learn more about oscillation on:

https://brainly.com/question/12622728

#SPJ11

The statement "Zeolites theoretically can be made magnetic by adding sodium ion to them" is true.

Zeolites are a class of microporous, aluminosilicate minerals that are commonly used for water filtration and industrial applications. It has been found that when sodium ion is added to zeolites, the magnetic properties of the zeolite are enhanced.

This is due to the strong interaction between the sodium ion and the zeolite lattice, which creates a net dipole moment. This increases the magnetic susceptibility of the zeolite, making it magnetically responsive. In conclusion, it is true that zeolites can be made magnetic by adding sodium ion to them.

for such more question on sodium ion

https://brainly.com/question/1933786

#SPJ11

Answer: 16

Explanation: Hence, the mass number of an oxygen atom = 8 + 8 = 16.

To turn chlorous acid solution into a buffer with pH 2.75, the mass of NaOH that a chemistry graduate student should dissolve is 1.338 g.

A buffer is a solution containing a weak acid and its conjugate base (or weak base and its conjugate acid) in similar amounts that can resist changes in pH when a small amount of acid or base is added.

Chlorous acid is a weak acid with the following equilibrium: HClO₂ (aq) + H₂O (l) ⇌ H₃O⁺ (aq) + ClO₂⁻ (aq)

For a solution of weak acid with the addition of a strong base, we have the following reaction: HClO₂ + NaOH → NaClO₂ + H₂O

Here, we add NaOH to turn the solution of chlorous acid into its buffer form. After adding NaOH, the resulting solution is composed of chlorous acid, its conjugate base (chlorite ion), and excess NaOH.

Next, we use the Henderson-Hasselbalch equation: Hence, the pH of the buffer is pH = pKa + log [A⁻]/[HA]

pH = 1.96 + log (0.00925 / 0.09075)

pH = 2.75

Finally, we calculate the mass of NaOH that a chemistry graduate student should dissolve: moles of NaOH = moles of HClO₂ = [HClO₂] × VNaOH = 0.00925 M (250 mL / 1000 mL) = 0.0023125 mol.

NaOH is in excess in the reaction; thus, it should be the limiting reagent. 0.0023125 mol NaOH corresponds to 0.1036 g of NaOH (1 mol / 39.997 g/mol), which is less than the amount required to make the buffer. Hence, the actual mass of NaOH required is 1.338 g.

Therefore, to turn chlorous acid solution into a buffer with pH 2.75, the mass of NaOH that a chemistry graduate student should dissolve is 1.338g.

Read more about acid here:

https://brainly.com/question/25148363

#SPJ11

Answer: No

Explanation:

because the relative energies of these orbitals depend on the specific electronic configuration of the atom and the effective nuclear charge experienced by the valence electrons. In some cases, the 4s orbital may be lower in energy and fill before the 3d orbitals, while in other cases the 3d orbitals may be lower in energy and fill before the 4s orbital.

57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .

There are a few steps to solve this.

Here they are: First, calculate the initial concentration of HCl in the solution.

Molarity = moles of solute / volume of solution in liters.

The volume of the solution is 57.0 mL, which is 0.0570 L.

The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L

Now we can solve for moles of HCl:

moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol

Next, we need to use the pH to find the concentration of H+ ions.

pH = -log[H+]0.90 = -log[H+]

Solving for [H+],

we get:[H+] = 7.94 x 10^-1 M

Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol

Solving for V,

we get: V = 6.47 x 10^-2 L

To find how much water was added,

we subtract the final volume from the initial volume:

Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)

Therefore, 50.5 mL of water was added to the original solution.

For more such questions on pH , Visit:

https://brainly.com/question/172153

#SPJ11

The answer is A. The Sp1 and E1 reaction mechanisms are both concerted processes. The statement is: "A tertiary alkyl bromide was heated in ethanol, thereby giving both Sp1 and E1 reaction products.

The Sn1 reaction involves a two-step mechanism, whereas the E1 reaction involves a one-step mechanism. In the Sn1 reaction, the rate-determining step is the loss of the leaving group and the formation of a carbocation intermediate

In the E1 reaction, the rate-determining step is the formation of a carbanion intermediate. So the answer that is false is option A. The Sp1 and E1 reaction mechanisms are both concerted processes.

To know more about Sp1 and E1 mechanism click the link: brainly.com/question/16929721

#SPJ11

The given statement a molecular cloud fragments as it collapses because density variations from place to place grow larger as the cloud collapses is true because as the cloud collapses, denser regions attract more matter from the surrounding regions, causing density variations to grow larger and eventually become unstable, leading to the fragmentation of the cloud into smaller clumps.

As a molecular cloud collapses, it can fragment into smaller clumps due to density variations. The collapse of a molecular cloud is primarily driven by gravity, but there are other factors such as turbulence, magnetic fields, and thermal pressure that can affect the process. As the cloud collapses, the denser regions can attract more matter from the surrounding regions, causing density variations to grow larger. These density variations can eventually become unstable and lead to the fragmentation of the cloud into smaller clumps, which can further collapse to form stars or star systems. This process is known as hierarchical fragmentation and is an important part of the formation of stars and galaxies in the universe.

To know more about density, here

brainly.com/question/28043858

#SPJ4

The fatty acid that has fewer than eight carbons, so it is classified as a fatty acid is a short-chain fatty acid.

Short-chain fatty acids (SCFAs) are carboxylic acids with 1 to 6 carbon atoms that are fatty acids. Because of their size, they are fat-soluble and water-soluble, and they are readily consumed and metabolized by the liver.

SCFA has numerous health advantages, including the reduction of inflammation and the improvement of gastrointestinal (GI) tract function. Acetic acid (two carbons), propionic acid (three carbons), and butyric acid (four carbons) are the most abundant SCFAs found in the GI tract, accounting for approximately 95% of the total.

This is not a single type of SCFA; however, it is still classified as an SCFA since it has fewer than eight carbon atoms.

To learn more about "fatty acid", visit:  https://brainly.com/question/17352723

#SPJ11

The oxide which is most likely to be acidic in water is option (B) CO₂.

An oxide is a chemical compound that consists of oxygen and other elements.

Oxides are the most common minerals on the planet. Oxides can be divided into acidic, basic, and amphoteric, depending on their acidity or alkalinity in water.

Acidic oxides are oxides that can dissolve in water to create acids.

Basic oxides are oxides that can dissolve in water to create bases.

Amphoteric oxides are oxides that can behave as either acid or base in water.

Carbon dioxide is an acidic oxide, it dissolves in water to form carbonic acid which is acid. carbon dioxide has no hydrogen so it is not an acid itself. but like any non metal oxides CO₂ dissolves in water to give an acidic solution.

CaO, Cs₂O and Li₂O are basic oxides, and Al₂O₃ is an amphoteric oxide.

Therefore, option (b) CO₂ is correct.

To know more about oxides, refer here:

https://brainly.com/question/9496279#

#SPJ11

The factors that influence which reaction predominates are the stereochemistry of the alkyl halide, basicity of the anion, leaving group ability, and alkyl halide structure. Thus, all the options are correct.

Substitution and elimination reactions are the two types of reactions that can be produced when alkyl halides and Lewis bases react together. A substitution reaction occurs when the halogen atom of the alkyl halide is replaced by a Lewis base, while an elimination reaction occurs when a hydrogen atom is removed from the alkyl halide by the Lewis base.

The factors that influence which reaction predominates when alkyl halides and Lewis bases react together:

Stereochemistry of the alkyl halide: The stereochemistry of the alkyl halide influences which reaction predominates. If the alkyl halide is chiral, the substitution reaction will predominate over the elimination reaction.

Basicity of the anion: The basicity of the anion influences which reaction predominates. If the anion is highly basic, the elimination reaction will predominate over the substitution reaction.

Leaving group ability: The leaving group ability influences which reaction predominates. If the leaving group is poor, the elimination reaction will predominate over the substitution reaction.

Alkyl halide structure: The alkyl halide structure influences which reaction predominates. If the alkyl halide is bulky, the elimination reaction will predominate over the substitution reaction.

Therefore, all the options are correct.

Learn more about Substitution reaction here:

https://brainly.com/question/30339615

#SPJ11

The empirical formula of the molecule is CH2.

To determine the empirical formula, we need to find the simplest whole-number ratio of the atoms in the molecule. We can assume 100 grams of the molecule since percentages are given by mass.

To find the ratio, we need to divide the masses of each element by their respective atomic masses and then divide the result by the smallest value obtained:

The smallest value is 7.14 mol, so we divide both values by 7.14:

To learn more about empirical formula, here

https://brainly.com/question/14044066

#SPJ4

Answer:

Magnetized objects move in the direction that reduces their magnetic potential energy. This is no different than the skate park.

Explanation: