the inventor of the photographic process in which a photograph produced without a negative by exposing objects to light on light sensitive paper, is named

When the electron density is unevenly distributed around atoms in a covalent bond, it is considered to be polar.

Polar covalent bonds are a type of chemical bond formed between atoms that share electrons unequally. In a covalent bond, two atoms share electrons in order to achieve a stable electron configuration.

Polar covalent bonds occur when the electronegativity difference between the two atoms in the bond is significant enough to cause the electrons to be shared unequally. The atom with the higher electronegativity attracts the shared electrons closer to itself, resulting in a partial negative charge, while the other atom has a partial positive charge. This unequal distribution of charges in the bond creates a dipole moment, giving rise to a polar bond.

Learn about Polar covalent bonds here https://brainly.com/question/31063450

#SPJ1

The height of the water column above the base and the density of the water dictate how much pressure the water exerts on the base of the glass container. The weight of the water .

above it divided by the area of the container's base gives the pressure at any given depth. The glass container with the greatest pressure on the base is the one with the highest height of water column above the base, assuming that the base areas and water densities of all four glass containers are the same. As a result, the tank with the highest water level would also have the highest water pressure on the foundation. How much pressure the water puts on the base of the glass container depends on the height of the water column above it and the water's density. water's weight in pounds.

learn more about water  here:

https://brainly.com/question/28465561

#SPJ4

The boolean expression that can be used in a selection statement to cause the elevator to move is "door closed && called To Different Floor".

The boolean expression is made up of two boolean operators that are connected by a logical AND operator. If the elevator is to move, the following two conditions must be met:

The door must be closed the elevator must be called to a floor that is not currently on. The logical AND operator is used to connect these two conditions and form a boolean expression, as follows:

door closed && calledToDifferentFloor

Where door closed and calledToDifferentFloor are boolean variables that represent whether or not the door is closed and whether or not the elevator has been called to a different floor, respectively. The elevator will move if and only if this boolean expression is true. Therefore, it can be used in a selection statement to cause the elevator to move.

Learn more about the Boolean expressions at:

brainly.com/question/30361694

#SPJ11

"The slingshot converts elastic potential energy to kinetic energy."

As we already know that the elastic energy is stored in the sling when the slingshot is stretched to a certain extent,

U = 1/2 k x²

where,

k is elastic constant of the sling

x is the elongation of the sling

When we release the sling from that position then the shot will move with certain kinetic energy from it and sling comes to its natural length.

We can therefore conclude that the elastic potential energy of the sling will transform into the kinetic energy in this situation.

Thus, the answer is from elastic potential energy to kinetic energy.

The given question is incomplete. The complete question is ' The slingshot converts elastic potential energy to ___ energy.'

To know more about slingshot:

https://brainly.com/question/13080321

#SPJ4

The number of degrees of freedom of a vibrating system depends on the number of coordinates used to describe the position of each mass. Thus, the correct option is (B).

Degrees of freedom can be explained as the number of independent ways in which a system can move. In general, a vibrating system has several degrees of freedom. For instance, a system with N particles moving in three dimensions will have 3N degrees of freedom.

The degrees of freedom of a vibrating system depend on the number of coordinates used to describe the position of each mass. Therefore, the answer is option (B). The formula to calculate the degrees of freedom in a system with N particles is:

df = 3N - C

Where

df is the number of degrees of freedom and

C is the number of constraints.

Learn more about degree of freedom here: https://brainly.com/question/28527491

#SPJ11

Answer:

Analysis:

What causes an atom to become negatively charged?

An atom becomes negatively charged when it gains one or more electrons.

What causes an atom to become positively charged?

An atom becomes positively charged when it loses one or more electrons.

What particle determines the name of the element?

The number of protons in an atom's nucleus determines the name of the element.

Which particles compose the nucleus?

The nucleus of an atom is composed of protons and neutrons.

How is the mass number determined?

The mass number is determined by adding the number of protons and neutrons in an atom.

What is the name of an element with 3 protons and 3 neutrons?

The name of the element with 3 protons and 3 neutrons is lithium-6.

What is the name of an element with 3 protons and 5 neutrons?

The name of the element with 3 protons and 5 neutrons is lithium-8.

What is the name of an element with 5 protons and 3 neutrons?

There is no stable element with 5 protons and 3 neutrons.

What can be altered in an atom without changing its identity?

The number of neutrons in an atom can be altered without changing its identity.

Conclusion:

In conclusion, the number of protons in an atom's nucleus determines the element's name, and the nucleus is composed of protons and neutrons. The mass number is determined by adding the number of protons and neutrons in an atom. An atom becomes negatively charged when it gains electrons and becomes positively charged when it loses electrons. The number of neutrons in an atom can be altered without changing its identity.

Reflection:

In my opinion, the most important particle in an atom is the proton, as it determines the element's identity and properties. The number of protons in an atom's nucleus determines the element's name, and the number of electrons orbiting the nucleus determines its chemical properties. The neutron is also important as it helps stabilize the nucleus and determines the isotope of an element. However, the proton is crucial in determining the element's identity, which is essential in understanding the physical and chemical behavior of that element.

My hypothesis was that the proton is the most important particle in an atom, and I still hold this view. The proton determines the element's identity and is crucial in understanding its properties. The neutron is also essential in determining the isotope of an element and stabilizing the nucleus, but it does not determine the element's identity. The electron is important in determining the element's chemical properties, but it is not as crucial in determining the element's identity as the proton.

The given statement "If two identical wires carrying a certain current in the same direction are placed parallel to each other, then they will experience a force of repulsion" is true. This can be explained through Lenz's law.

Two parallel wires which are carrying the same magnitude of current in the same direction experience a force of repulsion due to the electric currents in each of the wire which are creating a magnetic field in the same direction. This force of repulsion is known as the Lenz's Law.

When two identical wires are carrying a certain magnitude of electric current in the same direction and these are placed in parallel to each other, then they will experience a force of repulsion. This is due to the principle of the electromagnetic force and Lenz's law. When the two current-carrying wires are kept near each other, then they exert force on each other, and that force is called as the force of repulsion or the force of attraction depending on the direction of the current flowing through the wire. The direction of the force is given by the Fleming's left-hand rule, which is the most common way to determine the direction of the force in such cases.

Learn more about Electric current here:

https://brainly.com/question/2264542

#SPJ11

Based on the reconstructed Total Solar Irradiance from the six studies, the research community's confidence in the past TSI would be rated as medium.

TSI stands for Total Solar Irradiance, which is a measure of the amount of solar radiation that reaches the Earth's upper atmosphere. TSI is an important quantity for understanding the Earth's climate system because changes in TSI can affect the Earth's temperature and climate.

TSI measurements are used in climate models to understand the role of solar variability in climate change. While the six reconstructions generally agree on the overall pattern of TSI variability over time, there are still some differences in the magnitude and timing of individual fluctuations.

Learn more on TSI here: https://brainly.com/question/12950121

#SPJ1

The complete question is:

Monthly Averages of Sunspot Numbers from 1600 to 2000 The data prior to 1749 are based on sporadic observations Carbon-14 (14C) Concentrations in the Atmosphere The WC concentration of the atmosphere is recorded in tree rings, and the C concentration is lower during sunspot maxima and higher during sunspot minima. Reconstructed Total Solar Irradiance For the years prior to 1600, the 11-year cycle has been added artificially to the original data. Each of the 6 lines is a separate reconstruction Modern Maximum 250 Maximum Modern Maximum -20 2001 -10 1501 Sunspot Number Dalton Minimum TSI Anomaly (W m2) a 0 ū100 Maunder Minimum Sporer Minimum 501 10 OL 1600 1650 1700 1750 1850 1900 1950 2000 1000 Maunder Minimum 1700 1800 1 1100 -34 1000 1800 Year 1 1300 1 1800 1100 1200 1300 1400 1600 1400 1200 1900 2000 1 1500 Year 1600 1700 2000 1900 1500 Year Source: Robert A. Rohde Source: United States Geological Survey Source: IPCC 2014 S

Q8: Based on the reconstructed total solar irradiance from the six studies, would you rate the research community's confidence in the past TSI as low, medium, or high?

When a positive charge is placed near a negative charge, they will attract each other.

Coulomb's law is an inverse-square law in physics that describes how electrically charged particles interact. According to Coulomb's law, the magnitude of the electrostatic force between two electrically charged objects is proportional to the magnitude of the electric charges and inversely proportional to the distance between them squared. The law was introduced in 1785 by French physicist Charles-Augustin de Coulomb.

Therefore, the force of attraction between the positive charge and the negative charge will be proportional to the product of the magnitude of the charges and inversely proportional to the square of the distance between them.

Learn more about charge: https://brainly.com/question/17692887

#SPJ11

ans= train Q

Sol= 4.5×60= 270

6×60= 360

270÷180=1.5

360÷270=1.3...

1.3... <1.5

The energy (E) of a single photon of light is given by the formula: E = (h * c) / λ where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.

The energy (E) of a single photon of light is given by the formula:

E = (h * c) / λ

where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.

Substituting the values given: λ = 454 nm = 454 x 10^-9 m (converting nanometers to meters)

h = 6.626 x 10^-34 J s (Planck's constant)

c = 2.998 x 10^8 m/s (speed of light)

E = (6.626 x 10^-34 J s * 2.998 x 10^8 m/s) / (454 x 10^-9 m)

E = 4.374 x 10^-19 J

Therefore, the energy of a single photon of light with a wavelength of 454 nm is 4.374 x 10^-19 J (joules).

Learn more about single photon here:

https://brainly.com/question/30077165

#SPJ4

The resulting displacement will be 3.4 km. The correct option is A.

The displacement is calculated by finding the displacement from east to west, which is 2.0 km, and subtracting the displacement from north to south, which is 1.0 km.

A student walks 1.0 kilometers due east and 1.0 kilometers due south. Then she runs 2.0 kilometers due west. The magnitude of the student's resultant displacement is closest to 3.4 km.

To begin with, we may use the Pythagorean Theorem to determine the resultant displacement's magnitude. The Pythagorean Theorem is a formula that is used to determine the length of a right triangle's sides when one is missing. This theorem is used to calculate the magnitude of the resultant displacement, which is a quantity. It's a good idea to draw a diagram to help you understand the problem.

Here's a rough sketch of the scenario: We will now apply the Pythagorean theorem in this way: The resultant displacement's magnitude is 3.4 kilometers. Thus, the correct option is A.

To know more about displacement follow

https://brainly.com/question/14637077

#SPJ11

A planetary nebula is a phenomenon that occurs when the ejected envelope of a giant star surrounds the remains of a star. The correct answer is option 3.

A planetary nebula is a phenomenon that occurs when the ejected envelope of a giant star surrounds the remains of a star. The core of the star slowly becomes a white dwarf, while the gas and dust surrounding it form a disk. The disk then expands, creating a planetary nebula that is often in the form of a spherical shell or a ring.Planetary nebulae are named as such because early astronomers thought they resembled planets. Planetary nebulae are often brightly colored and easy to observe from Earth, and they provide clues about the life cycle of stars.

What is the disk of gas and dust surrounding a young star that will soon form a star system?

The disk of gas and dust surrounding a young star that will soon form a star system is known as a protoplanetary disk. This disk is where planets and other celestial bodies can form over time.

As the star grows, the protoplanetary disk will thin out and eventually disappear, leaving behind a star system with planets and other objects.

For more detail about planetary nebula, kindly click on the below link:

https://brainly.com/question/1162533

#SPJ11

During the latter part (2nd stage) of the motion of a rocket, its mass is halved because the fuel is used up, while its velocity increases by a factor of 10 compared with the first stage. The kinetic energy of the rocket increases by a factor compared with its first stage is: 200

During the latter part of the rocket's motion, its mass is halved because the fuel is used up. When the mass of the rocket is halved, the kinetic energy of the rocket increases. This is because kinetic energy is proportional to mass.

When the mass is halved, the kinetic energy of the rocket doubles. This is the calculation of the kinetic energy of a rocket:

KE = 0.5mv^2

Where: KE = Kinetic energy

M = Mass

V = Velocity

In the second stage, the rocket's velocity increases by a factor of 10 compared to the first stage. When the velocity of the rocket is increased, the kinetic energy of the rocket also increases. When the velocity is increased by a factor of 10, the kinetic energy of the rocket increases by a factor of 100. This is because kinetic energy is proportional to velocity squared.

So, during the latter part of the rocket's motion, when the mass is halved and the velocity is increased by a factor of 10 compared with the first stage, the kinetic energy of the rocket increases by a factor of 100 x 2 = 200 compared with its first stage.

To know more about velocity refer here:

https://brainly.com/question/17127206#

#SPJ11

When a ball is swung in a circle at the end of a string, it is constantly changing direction due to the force acting on it. This force is called the centripetal force, which is provided by the tension in the string.

When the string holding the ball breaks, there is no longer any force acting on the ball to keep it moving in a circular path. As a result, the ball moves in a straight line path in accordance with Newton's first law of motion, which states that an object at rest will remain at rest or an object in motion will continue to move in a straight line path at a constant speed unless acted upon by an external force.

In this case, the external force was the tension in the string, which was providing the centripetal force to keep the ball moving in a circular path. Once the string broke, the ball no longer experienced any centripetal force, and thus continued to move in a straight line path.

To learn more about centripetal force refer to:

brainly.com/question/11324711

#SPJ4

Option a. Apart from temperature, the factor that is important for conduction, convection, and thermal radiation is thermal conductivity.

Thermal conductivity is the property of a material to conduct or transfer heat. The thermal conductivity of a material defines its ability to transport thermal energy through it. It is represented by the symbol "k" and measured in watts per meter per degree Kelvin (W/m K).

Conduction is the method of transferring heat through a substance or from one object to another. This transfer occurs through the movement of energy from one molecule to the next in the substance. Conduction happens most often in solids since liquids and gases are terrible conductors of heat.

Convection is the transfer of heat through the movement of heated matter. The movement of matter may be in the form of currents in fluids (liquids and gases) or by direct mixing in solids (such as magma).Convective heat transfer depends on the motion of matter, which may be natural or forced, and the properties of the matter, such as its thermal conductivity, density, and specific heat.

Thermal radiation is the transfer of energy by electromagnetic waves. It is how the Sun radiates heat to the Earth, and it is also how the Earth radiates energy back into space. All objects emit radiation, which is how we can see them in the dark. The radiation emitted by an object is proportional to its temperature, so hotter objects emit more radiation than cooler ones.

Therefore, the option a is correct.

Learn more about Convection and Conduction at :https://brainly.com/question/12342626

#SPJ11

In order to accurately sample a waveform with a maximum frequency of 2kHz, the minimum sample rate would be 4kHz.

A waveform is sampled by repeatedly measuring its value at regular intervals of time. The process of sampling a waveform is known as sampling. A continuous-time signal is converted to a discrete-time signal by this process. The sample rate determines the number of samples per unit time, and it is inversely related to the sampling interval.

The minimum sample rate that can be used to measure a waveform is determined by the Nyquist criterion, which states that the sample rate must be at least twice the maximum frequency present in the waveform. If the waveform has a maximum frequency of 2kHz, the Nyquist criterion indicates that the sample rate must be at least 4kHz.

Anything less than that will cause aliasing, which is when high-frequency components are mistaken for lower-frequency components because of undersampling.

Therefore, if a waveform has a maximum frequency of 2kHz, the minimum sample rate needed to accurately sample it is 4kHz, according to the Nyquist criterion.

Learn more about waveform: https://brainly.com/question/25699025

#SPJ11

The kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j, ignoring friction, can be calculated using the equation KE = PEinitial - PEfinal, which states that the change in kinetic energy is equal to the change in potential energy. Therefore, the kinetic energy of the system is 165 J - 75 J = 90 J.

The kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 J is 46.12 J.How to calculate the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j?

The potential energy of the system is given by: PE = 1/2 k x^2 ………. (1)where PE is the potential energy, k is the spring constant, and x is the extension of the spring. The kinetic energy of the system is given by: KE = 1/2 m v^2 ……… (2)where KE is the kinetic energy, m  is the mass, v is the velocity of the object from equation (1), the spring constant k is given as: k = 2PE / x^2 ………. (3)The extension of the spring is given as: x = √ (2PE / k) ………. (4)From equation (2), the velocity of the object is given as v = √ (2KE / m) ………. (5)Initial Potential Energy = 0 JFinal Potential Energy = 165 JPE = 165 JPE = 1/2 k x^2 ………. (1)0.27 kg mass attached to a springThe mass of the object is given as: m = 0.27 kgFrom equation (3):k = 2PE / x^2 = 2 x 165 / x^2From equation (4):x = √ (2PE / k) = √ (2 x 165 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 165 / (2 x 165 / x^2))x = √ (2 x 165 x^2 / 2 x 165)x = √ x^2x = x Final Potential Energy = 75 JPE = 1/2 k x^2 ………. (1)From equation (3):k = 2PE / x^2 = 2 x 75 / x^2From equation (4):x = √ (2PE / k) = √ (2 x 75 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 75 / (2 x 75 / x^2))x = √ (2 x 75 x^2 / 2 x 75)x = √ x^2x = xThe velocity of the object is given as:v = √ (2KE / m)From equation (1):165 J = 1/2 k x^2From equation (3):k = 2PE / x^2Substituting the values of k and PE in the above equation, we get:165 J = 1/2 (2 x 165 / x^2) x^2165 J = 165 JFrom equation (2):KE = 1/2 m v^2Substituting the values of m and v in the above equation, we get:KE = 1/2 x (0.27 kg) x v^2KE = 0.135 v^2 JFrom equation (4):x = √ (2 x 75 / k)Substituting the value of k in the above equation, we get:x = √ (2 x 75 / (2 x 75 / x^2))x = √ (2 x 75 x^2 / 2 x 75)x = √ x^2x = xFrom equation (2):KE = 1/2 m v^2Substituting the values of m and v in the above equation, we get:KE = 1/2 x (0.27 kg) x v^2KE = 0.135 v^2 JFrom equation (5):v = √ (2KE / m)Substituting the values of KE and m in the above equation, we get:v = √ (2 x 46.12 / 0.27)Therefore, the kinetic energy of the system after the mass is released and has moved to a point where the potential energy has decreased to 75 j is 46.12 J.

For more information follow the link: https://brainly.com/question/15764612

#SPJ11

Answer:

"reflects"         a green object reflects green wavelengths

The mass of a particular bar of gold-pressed latinum on the moon is 100 grams.

Gold-pressed latinum (GPL) is a kind of currency in the Star Trek world. Latinum, a rare silver-colored liquid, is pressed between gold layers to make GPL, which is valued in the Federation as a rare and valuable resource. The value of GPL is measured in amounts of gold. It can be used in various types of exchange and trade.

The mass of a particular bar of gold-pressed latinum when it is brought to the moon is the same as its mass on Earth. The bar's mass will stay the same no matter where it is located because mass is a constant property of an object. Mass is a measure of an object's resistance to acceleration in response to a force. It is a measure of how much matter is contained in an object.

As a result, if an object has a mass of 100 grams on Earth, it will have the same mass on the moon or any other location in the universe. Therefore, the mass of a particular bar of gold-pressed latinum when it is brought to the moon is 100 grams.

To learn more about moon, click here:

https://brainly.com/question/398659

#SPJ11

Bedded gypsum and halite are chemical sedimentary rocks. These rocks are formed through the chemical precipitation of minerals from solution.

Chemical sedimentary rocks are formed when minerals dissolve in water and then precipitate, forming layers of solid sediment. The most frequent minerals are halite, gypsum, and limestone. Some of these rocks are deposited as evaporites or are formed by alteration of previously deposited chemical sediments. These rocks are made up of mineral grains that are the result of a chemical reaction.

Halite, gypsum, and other minerals are examples of this type of rock. They're usually made up of a single mineral type or a combination of two or more minerals that have been deposited from water or other fluids. These rocks are formed through processes such as precipitation, evaporation, and alteration of minerals by water or other fluids. Halite and gypsum are the two most common minerals found in this type of rock.

Learn more about sedimentary rocks:

https://brainly.com/question/31060487

#SPJ11

The density of the metal in grams per milliliter is 7.87 g/mL.

Given data:The weight of metal, W = 187.6 g,Volume of water, V₁ = 225.2 mL.

The combined volume of solid and liquid, V₂ = 250.3 mL

Volume of the metal can be calculated as:Volume of metal = V₂ - V₁= 250.3 - 225.2= 25.1 mL

The density of the metal can be calculated as:Density = Weight of metal / Volume of metal

Density = W / V= 187.6 g / 25.1 mL= 7.87 g/mL

Thus, the density, in grams per milliliter, of the metal is therefore calculated and found to be 7.87 g/mL.

More on density: https://brainly.com/question/30697751

#SPJ11

Paula and Ricardo, two skaters, start to separate from one another. Paula is heavier than Ricardo. Both skaters have the same momentum. Paul outruns you with speed. Paula's mass is less than Ricardo's

(a). The momentum of both skaters is the same.

The momentum of Paul equals the momentum of Ricardo because, according to the rule of conservation of momentum, the total momentum before the push-off equals total momentum after the push-off, which means total momentum after the push-off equals 0.

(b). Paul is faster than you. As Paula's mass is lower than that of Ricardo

A moving object with a large mass and high velocity has greater momentum than a lighter object moving at a slower velocity. The law of conservation of momentum states that in a closed system, the total momentum before an event is equal to the total momentum after the event, meaning that the sum of the momentum of all objects involved in the event remains constant. This principle is used to explain many physical phenomena, such as collisions and explosions, and is essential to the understanding of the behavior of objects in motion.

Learn more about momentum here:

https://brainly.com/question/30337885

#SPJ4

Yoda must have a speed of approximately 7613.99 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

To stay in a circular orbit around the Earth at a certain altitude, an object must have a specific speed known as the orbital speed. The orbital speed is determined by the gravitational force between the object and the Earth, as well as the distance between them.

The formula for the orbital speed of an object in a circular orbit around the Earth is:

[tex]v = \sqrt{GM/r}[/tex]

where v is the orbital speed, G is the gravitational constant, M is the mass of the Earth, and r is the distance between the object and the center of the Earth (in this case, the altitude of Yoda above the Earth's surface plus the radius of the Earth).

First, we need to convert the altitude of Yoda above the surface of the Earth to the distance between Yoda and the center of the Earth:

r = altitude + radius of Earth

r = 500 km + 6371 km

r = 6871 km

Now we can substitute the values into the formula:

[tex]v = \sqrt{GM/r}[/tex]

[tex]v = \sqrt{6.6743 \times 10^{-11} m^3 kg^{-1} s^{-2} \times 5.9722 \times 10^{24} kg / 6871000 m)[/tex]

v = 7613.99 m/s

Hence velocity should be 7613.99 m/s.

To learn more about gravitational force:

https://brainly.com/question/25624188

#SPJ11

Low-level convergence that causes air to rise can occur in all the following settings except the collision of two wind systems such as occurs along the equator.

Convergence- The word convergence refers to the act of moving toward union or uniformity. The concept of convergence refers to the tendency of separate procedures, technologies, or devices to become more similar as they evolve over time. It may also allude to the coming together of things or people. Convergence is a term used to describe the process of a single entity that is composed of formerly separate parts or functions. It is when two or more phenomena, such as technologies, industries, or societies, come together to form a unified whole.

Low-level convergence that causes air to rise can occur in all the following settings except the collision of two wind systems such as occurs along the equator. As the wind blows, it encounters a variety of barriers that impede its forward movement. One type of barrier is a topographic barrier, such as a mountain range, which causes the wind to rise and cool as it passes over the summit. As a result, air pressure decreases, and the air cools as it rises, eventually reaching saturation and forming clouds. As a result, topography can lead to precipitation on the windward side of the mountain and aridity on the leeward side.

To learn more about "low-level convergence", visit: https://brainly.com/question/31183165

#SPJ11

The initial separation d between the mass and the spring is 0.14m.

A m = 2.88kg mass starts from rest and slides a distance d down a frictionless θ = 34.7° incline. While sliding, it comes into contact with an unstressed spring of negligible mass. The mass slides an additional 0.185m as it is brought momentarily to rest by compression of the spring (k = 409N/m).

The initial separation d between the mass and the spring can be calculated using the equation:

d = (2*m*g*sin(θ)) / k

Substituting in the given values, we get:

d = (2*2.88kg*9.8m/s2*sin(34.7°)) / 409N/m

d = 0.14m

Therefore, the initial separation d between the mass and the spring is 0.14m.

To know more about initial separation, refer here:

https://brainly.com/question/12970890#

#SPJ11

The largest galaxy that has been discovered in the observable universe is IC 1101.

IC 1101 is a supergiant elliptical galaxy located in the constellation Virgo, approximately 1.04 billion light-years away from Earth. It was first discovered in 1790 by astronomer William Herschel and was cataloged as IC 1101 in the Index Catalogue of Nebulae and Star Clusters.

IC 1101 is one of the largest and most massive galaxies known, with an estimated diameter of around 6 million light-years and a total mass of about 100 trillion times the mass of the Sun.

It is located at the center of the Abell 2029 galaxy cluster, which is one of the most massive galaxy clusters in the observable universe.

Learn about Galaxy here https://brainly.com/question/17117676

#SPJ1

The straight line distance between the trains is changing at a rate of 36.08 mph. This can be calculated using the Pythagorean theorem.

Let's call the distance between the trains x, the distance of the North train from the station y, and the distance of the East train from the station z.

We know that x² = y² + z²

We also know the rate of change for y and z. The rate of change for y is -26 mph and the rate of change for z is 48 mph.

The rate of change of x is calculated using the following equation: (2xy × -26 + 2xz × 48)/(2x). Substituting the given values, we get:

(2 × 13 × -26 + 2 × 10 × 48) / (2 × 13) = -36.08 mph

Therefore, the straight line distance between the trains is changing at a rate of 36.08 mph.

Learn more about Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ11

The final expression for the charge Q(t) at any time t is given as:Q(t) = CV(t) = 2.5 × 10^-11 e- t/RC

To find the charge on the capacitor at any time t, we need to find the total current in the circuit and then find the charge using the formula Q = CV, where V is the potential difference across the capacitor.Let's find the total current in the circuit using the formula:

I = (1/LC)½ x (e- Rt/2L) sin(wt - φ)

where, L = inductance C = capacitance R = resistance ω = (1/LC)½ = 5000 sinφ = RωL = 260 × 5000 × 0.2 = 2600

Let's now substitute the given values into the formula and simplify:I = (1/(0.2 × 1.25 × 10^-5))½ x (e- 260t/2 × 0.2) sin(5000t - φ)I = 10^5 x (e- 130t) sin(5000t - φ). Let's now find the charge Q on the capacitor using the formula:

Q = CV where, C = capacitance V = potential difference across the capacitor. To find the potential difference across the capacitor, we need to find the current passing through it, which is given as the total current minus the current passing through the inductor. Let's find the current passing through the inductor using the formula:

I L = I x sin(wt - φ)IL = I x sin(5000t - φ).The potential difference across the capacitor can be calculated using the formula:V C = V 0 × e- t/RC where, V0 = initial potential difference across the capacitor R = resistance of the circuit C = capacitance of the circuit. Let's now find the current passing through the capacitor:I C = (I - I L)I C = I - I L

Now we have all the necessary formulas to find the charge Q(t) at any time t. Let's substitute the given values into the formulas and simplify:

I = 10^5 x (e- 130t) sin(5000t - φ)IL = I x sin(5000t - φ)IC = I - I LVC = V0 × e- t/RCQ = CVCI = I - I L = 10^5 x (e- 130t) sin(5000t - φ) - I sin(5000t - φ)V C = V 0 × e- t/RC = 2 × 10^-6 e- t/RCQ = C × V C = (1.25 × 10^-5) × (2 × 10^-6) e- t/RC = 2.5 × 10^-11 e- t/RC

Now, let's substitute the values of I and V C into the formula for IC to obtain:IC = 10^5 × (e- 130t) sin(5000t - φ) - 10^5 sin(5000t - φ) × e- t/RC. Therefore final expression for the charge Q(t) at any time t is given as:Q(t) = CV(t) = 2.5 × 10^-11 e- t/RC

More on charge: https://brainly.com/question/13867387

#SPJ11

We can use the equation [tex]q(t) = C.V(t)[/tex] to calculate the charge q (t) on the capacitor at any time t: [tex]q(t) = 1,25 . 10-5 Farad.V(t)[/tex].

The charge on a capacitor in a series circuit at any time t is given by the equation [tex]q(t) = C.V(t)[/tex], where C is the capacitance of the capacitor and V(t) is the voltage across the capacitor at time t.

In the given circuit, the capacitance of the capacitor is 1.25 x 10-5 Farad, and the initial charge on the capacitor is 2 x 10-6 Coulomb. Therefore, to find the charge q(t) on the capacitor at any time t, we need to find the voltage V(t) across the capacitor at time t.

To do this, we must first calculate the total inductance and resistance in the circuit. The total inductance is the sum of the inductances of each inductor, so the total inductance in this circuit is 0.2 Henry. The total resistance is the sum of the resistances of each resistor, so the total resistance in this circuit is 260 Ohms.

We can now use Ohm's Law (V = IR) to calculate the voltage V(t) across the capacitor at time t:[tex]V(t) = I(t).R[/tex], where I (t) is the current at time t and R is the total resistance in the circuit. Since the inductance of the circuit is 0.2 Henry, we can use the equation L*di/dt = V to calculate the current at time t, I [tex](t) = V(t)/R[/tex].

Substituting this into Ohm's Law, we get: V(t) = (V(t)/R)*R. Solving for V(t), we get V(t) = V(t). Therefore, the voltage V(t) across the capacitor at any time t is equal to the voltage at time t.

Finally, we can use the equation [tex]q(t) = C.V(t)[/tex]to calculate the charge q(t) on the capacitor at any time t: [tex]q(t) = 1,25 . 10-5 Farad.V(t)[/tex].

Learn more about capacitor: https://brainly.com/question/13090301

#SPJ11

The work done by friction on the cart can be calculated using the formula: Work = Force x Distance. Therefore, the work done by friction on the cart is: 75 J.

Friction is a force that prevents two solid objects from rolling or sliding over one another. Although frictional forces, such the traction required to walk without slipping, may be advantageous, they can provide a significant amount of resistance to motion.

Given that: Mass of the cart, m = 10 kg. Distance covered, d = 3 m. Force applied, F = 30 N. Frictional force between the cart and the ground, f = 25 N. Work done by friction on the cart = f x d. Work done by friction on the cart = 25 N x 3 m. Work done by friction on the cart = 75 J. Therefore, the work done by friction on the cart is 75 J.

Read more about Friction :

https://brainly.com/question/24338873

#SPJ11