t/f the mean and standard deviation are more accurate measures of center and spread when the data is skewed

No, we cannot perform element by element addition, subtraction, multiplication and division when the matrices are different sizes, because to do this the size of matrices should be same.

The Element-by-element operations, also called element-wise operations, can only be performed when two matrices have the same dimensions, meaning they have the same number of rows and columns.

In this case, the operations are applied to the corresponding elements of each matrix, resulting in a new matrix with the same dimensions as the original matrices.

When the two matrices have different sizes, element-by-element operations are not defined. In some cases, it may be possible to perform other types of operations, such as matrix multiplication or matrix addition (if the matrices have compatible dimensions).

Learn more about Matrices here

https://brainly.com/question/1312667

#SPJ4

The given question is incomplete, the complete question is

Can your perform element by element addition, subtraction, multiplication and division when the matrices are different sizes?

Answer:

4:9

Step-by-step explanation:

Answer:

Scale factor = 2.25

Step-by-step explanation:

To find the scale factor between two similar shapes, we need to compare the corresponding sides of the shapes.

The scale factor is the ratio of the length of any side of one shape to the length of the corresponding side on the other shape.

From inspection of the given diagram, the ratio of the corresponding sides of the two similar figures is:

⇒ Figure 1 : Figure 2 = 8 : 18

Therefore, to find the scale factor from Figure 1 to Figure 2, divide the side length of Figure 2 by the corresponding side length of Figure 1:

[tex]\implies \sf Scale\;factor=\dfrac{18}{8}=2.25[/tex]

two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8  then these fractions would have a common denominator of 8.

A number that can be divided exactly by all of the denominators in a group of fractions is referred to as a common denominator. 2. A noun that counts. A trait or attitude that all members of a group share is known as a common denominator.

Since the two fractions have a common denominator of 8, they can be written in the form of a/b and c/8, where a and c are integers.

There are many possible combinations of integers that could satisfy this condition. Here are some examples:

1/8 and 3/8

2/8 (which simplifies to 1/4) and 6/8 (which simplifies to 3/4)

4/8 (which simplifies to 1/2) and 7/8

5/8 and 2/8 (which simplifies to 1/4)

3/8 and 4/8 (which simplifies to 1/2)

In general, any two fractions with a common denominator of 8 can be expressed in the form of a/b and c/8, where a and c are integers. As long as a and c are not both multiples of 8  then these fractions would have a common denominator of 8.

To know more about common denominator  visit:

https://brainly.com/question/29775115

#SPJ1

The expected value of the given data is 3.2.

The expected value of a discrete random variable is the weighted average of its possible values, where the weights are their respective probabilities. Thus, the expected value of X is given by

E(X) =[tex]1*0.1 + 2*0.2 + 3*0.3 + 4*0.2 + 5*0.2\\ = 0.1 + 0.4 + 0.9 + 0.8 + 1\\ = 3.2[/tex]

Therefore, the expected value of X is 3.2, rounded to one decimal place.

Learn more about   expected value here:

https://brainly.com/question/29574962

#SPJ1

The categorical data in the table is column C, Position.

In mathematics and statistics, a table is a way of presenting data in a structured manner, typically with columns and rows. Tables are commonly used to organize and present large amounts of data in a clear and concise way, making it easier to read and analyze. Tables can be used to display numerical data, as well as categorical data, such as names, dates, and labels. They can also be used to summarize data and display relationships between different variables. Tables are often used in scientific research, business, finance, and other fields where data analysis is important.

Here,

In the table given, the only column that contains categories or groups is the "Position" column. It contains categorical data as it lists the positions of the players - Goal, Wing, and Center. On the other hand, "Name" and "Goals" columns contain individual values and numerical data, respectively, and are not considered categorical data.

To know more about table,

https://brainly.com/question/30244091

#SPJ1

Answer:

1/6

Step-by-step explanation:

5/6 - 4/6 = 1/6

Answer:

Step-by-step explanation:

To subtract these fractions, we need to have a common denominator. In this case, the denominators 5 and 6 do not match, so we have to find the least common multiple (LCM) of 5 and 6, which is 30.

Then, we can convert both fractions so that they have a denominator of 30:

5/6 = 25/30

4/6 = 20/30

Now we can subtract the numerators:

25/30 - 20/30 = 5/30

Simplifying the result to its lowest terms, we have:

5/30 = 1/6

Therefore, 5/6 - 4/6 = 1/6.

The possible dimension of the canvas she could use for her paintings is 71.25 cm × 45 cm

The given dimensions of the mountain scenery in the calendar are 28.5 cm × 18 cm.

To make a painting similar to this scenery, Christina needs to use a canvas with the same aspect ratio as the mountain scenery in the calendar. Aspect ratio is the proportional relationship between the width and height of an image or object.

To find the aspect ratio of the mountain scenery in the calendar, we divide the width by the height:

aspect ratio = width / height = 28.5 cm / 18 cm = 1.5833

Now we can calculate the aspect ratio for each of the given canvas options by dividing the width by the height:

42.75 cm × 51 cm has an aspect ratio of 42.75 cm / 51 cm = 0.8382

14.25 cm × 36 cm has an aspect ratio of 14.25 cm / 36 cm = 0.3958

57 cm × 27 cm has an aspect ratio of 57 cm / 27 cm = 2.1111

71.25 cm × 45 cm has an aspect ratio of 71.25 cm / 45 cm = 1.5833

46 cm × 68 cm has an aspect ratio of 46 cm / 68 cm = 0.6765

Only the option 71.25 cm × 45 cm has the same aspect ratio (1.5833) as the mountain scenery in the calendar, so this is the correct answer.

Learn about aspect ratio here https://brainly.com/question/23962371

#SPJ1

4π  is the period of the tangent function.

What does Tangent Function mean?

The tangent function, one of the primary six trigonometric functions, is typically expressed as tan x. When considering the angle in a right-angled triangle, it is the ratio of the opposite side to the adjacent side.

                                        It is crucial to understand the tangent function in trigonometry because it is a periodic function. Using the unit circle will make understanding the tangent function the simplest possible.

  a tangent function f (x) on the interval [–2π, 2π].

∵ f(-2π) and f(2π) are not defined.

∴ x = -2π and x = 2π are two closet asymptotes .   { the asymptotes of        

                                                                                tangent function.}

  ∴ period = 2π - (- 2π )

                  = 4π

Learn more about tangent function

brainly.com/question/30910929

#SPJ1

We can calculate Sylvia's dad purchased 8/3 pounds of potatoes for the Thanksgiving supper by using division.

Describe division?

Together with addition, subtraction, and multiplication, division is one of the four fundamental operations in mathematics. A bigger group is divided into smaller groups using the division process so that each group has an equal number of items. It is a mathematical technique for distributing and grouping things equally.

The division process is repeated subtraction. It is the polar opposite of multiplying. It is defined as the procedure for developing fair organisations. In order for the larger number taken to equal the multiplication of the smaller numbers, we divide larger numbers into smaller ones while dividing them.

Now in this question,

1 bag of potatoes is given as = 1/3 pounds

Then, 8 bags of potatoes= 8 × 1/3

=8/3 pounds

To know more about division, visit:

https://brainly.com/question/21416852

#SPJ1

Answer:

пошел в

Step-by-step explanation:

The calculation of the interest received by Investor A and Investor B is as follows:

Compound interest is based on the system of charging interest on accumulated interest and principal for each period.

Simple interest is charged on only the principal for each period.

N (# of periods) = 3 years

I/Y (Interest per year) = 8%

PV (Present Value) = $4,500

PMT (Periodic Payment) = $0

Results:

Future Value (FV) = $5,668.70

Total Interest = $1,168.70

N (# of periods) = 3 years

r = 1 paisa per rupee per month

= 1÷100*100 = 1%

Annually rate =1%*12 = 12%

PV (Present Value) = $4,500

Results:

Total Interest = $1,620 (R4,500 x 12% x 3)

Future Value (FV) = $6,120.

Thus, while Investor A receives $1,168.70 at the end of 3 years, Investor B receives $1,620.

Learn more about compound and simple interests at https://brainly.com/question/2277782.

#SPJ1

The largest interval which includes x=0 for which the given initial value problem has a unique solution is (-∞,4).

The Differential Equation is : (x-4)y'' + 2y = x,

Now, we convert the differential-equation into the standard form,

We get,

⇒ y'' + 2y/(x-4) = x/(x-4)     ...equation(1)

We know that second order differential-equation is :

⇒ ay'' + by' + cy = R   ...equation(2),

Now, On comparing equation(2) with equation(1),

we get,

The values are : a = 1, b = 0 and c = 2/(x-4), R = x/(x-4),

The Values of "c" , "R" are continuous except at the value "4" because on substituting 4 in x of c and x of R the values of c and R approaches to ∞.

Therefore, The largest-interval which includes x=0 is (-∞,4).

Learn more about Initial Value Problem here

https://brainly.com/question/13193828

#SPJ4

Step-by-step explanation:

this is solution which is given above in photo

Jack needed 7 7/8 pounds of flour for his batch of cookies.

Define Pounds

"Pounds" is a unit of measurement for weight, commonly used in the United States and other countries that have adopted the imperial system of measurement. One pound is equal to 16 ounces, and there are 2.20462 pounds in one kilogram.

Mary used 2 1/4 pounds of flour for her batch of cookies.

finding out how much flour Jack needed, we first need to determine how many cookies Jack made.

Since Jack made 3 1/2 times the amount of cookies that Mary made, we can calculate:

Number of cookies Jack made = 3.5 x Number of cookies Mary made

Let's start by finding out how much flour Mary used per cookie:

2 1/4 pounds of flour / Number of cookies Mary made

So, if Mary made X cookies, Jack made 3.5X cookies.

Now we can set up an equation:

2 1/4 pounds of flour / X cookies = Amount of flour per cookie

Amount of flour per cookie x Number of cookies Jack made = Total amount of flour Jack needed

Amount of flour per cookie = 2 1/4 pounds of flour / X cookies

Number of cookies Jack made = 3.5X

Total amount of flour Jack needed = Amount of flour per cookie x Number of cookies Jack made

Total amount of flour Jack needed = (2 1/4 pounds of flour / X cookies) x (3.5X cookies)

Total amount of flour Jack needed = 7 7/8 pounds of flour

Therefore, Jack needed 7 7/8 pounds of flour for his batch of cookies.

To know more about weight, visit:

https://brainly.com/question/10069252

#SPJ1

Answer:

hdjeujnejsjjdjdjjdjd

A defective stamp is likely to be chosen at random 1.4% of the time, or about 0.014 times. The observed percentage probability  faulty stamps is below the 3.5% maximum permitted rate,

Name an event from one outcome. Step 2: Compile a list of all potential outcomes, including any positive ones. Step 3: Subtract the number of favorable outcomes from the total number of possibilities that are feasible.

P(faulty) = quantity of defective stamps divided by total quantity of stamps

P(defective) = 10/700.

0.014 P(defective)

Consequently, there is a 1.4% chance (or about 0.014) that a randomly chosen stamp will be flawed.

B-The observed percentage of flawed stamps is:

10 / 700 0.5 – 0.014

Divide this rate by 100 to get the percentage:

0.014 x 100 approximately 1.4%

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1

Step-by-step explanation:

remember the trigonometric triangle inside a circle.

sine is the up/down leg, cosine is the left/right leg.

the Hypotenuse (baseline) of the right-angled triangle is the angle-defining radius of the circle.

this is the basic definition inside the norm-circle with radius = 1.

for any other size sine and cosine need to be multiplied by the actual radius for the actual triangle side lengths.

I think you need the answer in simplified fraction and square root notification (you cut that off), but I give you also the decimal result, just in case.

so,

78 = cos(30)×y

78 = (sqrt(3)/2) × y

y = 78 / (sqrt(3)/2) = 2×78/sqrt(3) = 156/sqrt(3) =

= 90.06664199...

x = sin(30) × y = 0.5 × 156/sqrt(3) = 78/sqrt(3) =

= 45.033321...

According to the Mean Value Theorem, if f(x) is a function that is continuous on the closed interval [a, b] and differentiable on the open interval (a, b), then there exists at least one c in (a, b) such that:

f(b) - f(a) = f'(c) x (b - a)

To find a c that satisfies the theorem, we need to solve for c:

c = (f(b) - f(a)) / (b - a) / f'(c)

However, this equation cannot be solved directly because c appears on both sides. Instead, we can use an iterative numerical method to approximate c.

One such method is the bisection method, which involves repeatedly dividing the interval (a, b) in half and checking which subinterval contains a root. Here's how it works:

1. Set c = (a + b) / 2, the midpoint of the interval.

2. Evaluate f'(c) using the derivative of f.

3. Calculate f(b) - f(a) and f'(c) x (b - a).

4. If f'(c) x (b - a) = f(b) - f(a), then c is the solution.

5. If f'(c) x (b - a) > f(b) - f(a), then the solution is in the left subinterval (a, c), so set b = c and go to step 1.

6. If f'(c) x (b - a) < f(b) - f(a), then the solution is in the right subinterval (c, b), so set a = c and go to step 1.

Repeat steps 1-6 until the solution is found to a desired degree of accuracy.

Note that this method assumes that f'(x) is continuous on [a, b], which is not always the case. In such cases, other numerical methods may be required.

To know more about mean value:

https://brainly.com/question/12513463

#SPJ4

In response to the stated question, we may state that As a result, the function journey lasted 5.1875 hours.

In mathematics, a function is a connection between two sets of numbers in which each member of the first set (known as the domain) corresponds to a single element in the second set (called the range).

In other words, a function takes inputs from one set and produces outputs from another. Inputs are commonly represented by the variable x, whereas outputs are represented by the variable y.

A function can be described using an equation or a graph. The equation y = 2x + 1 represents a linear function in which each value of x yields a distinct value of y.v

a) Because time cannot be negative, the domain of the function g(t) is the set of all non-negative real numbers. As a result, the domain is [0, ].

Because the amount of gas in the tank cannot be negative or more than the tank's capacity. The range of the function g(t) is the set of all non-negative real numbers less than or equal to 23 (the maximum capacity of the tank).

We can graph the function g(t) by plotting points for different values of t and connecting them with a line. For instance, if we pick t = 0, g(0) = 23, we plot the point (0, 23). We plot the point if we select t = 1 and g(1) = 19.8. (1, 19.8).

c) We are informed that there are 6.4 gallons remaining at the end of the journey. As a result, g(t) = 6.4. We can solve for t by plugging this number into the equation for g(t):

[tex]6.4 = 23–3.2t 3.2t = 16.6 t = 5.1875 g(t) = 23–3.2t[/tex]

Therefore, the journey lasted 5.1875 hours.

Learn more about function here:

https://brainly.com/question/28193995

#SPJ1

The process to show that if 16 people are seated in a row of 20 chairs, then some group of 4 consecutive chairs must be occupied is shown below.

We prove this using the Pigeonhole Principle, which states that if n items are placed into m containers, and n > m, then at least one container must contain more than one item.

Let us consider the 16 people seated in a row of 20 chairs. Each person occupies one chair, so there are 20 - 16 = 4 empty chairs in the row.

We assume that empty chairs as containers, and people as items that need to be placed into containers.

Since there are more items (people) than containers (empty chairs), there must be at least one group of 2 or more consecutive empty chairs.

Now, let's consider the complement of this statement: Suppose there are no groups of 4 consecutive chairs that are occupied. Then, each group of 4 consecutive chairs contains at most 3 people.

We partition the row of chairs into groups of 4 consecutive chairs.

So, there are 20 - 3 = 17 such groups. By the statement above, each of these groups contains at most 3 people. Therefore, the total number of people seated in the row is at most 17×3 = 51.

But, we know that there are actually 16 people seated in the row. This is a contradiction, since 51 < 16. Therefore, our assumption that there are no groups of 4 consecutive chairs that are occupied must be false, and we have proved that some group of 4 consecutive chairs must be occupied.

Learn more about Pigeonhole Principle here

https://brainly.com/question/30322724

#SPJ4

The given statement " Research shows that sketch artists almost always produce more-accurate facial images than technicians using other methods." is True. Because sketch artists are able to capture more nuanced details of face

Research suggests that trained sketch artists can produce more accurate facial images compared to other methods such as facial recognition software or composite imaging software. This is because sketch artists can capture more details and variations in the facial features of a suspect or witness.

They can also work with the witness to create a likeness that accurately reflects their memory of the individual. Additionally, sketch artists are able to adjust and refine the image as the witness provides more information or corrections, leading to a more accurate final image.

To know more about facial images:

https://brainly.com/question/26152614

#SPJ4

Simplifying remex's works the same way we simplify fractions. In fractions, a rational number is considered to be a simplified form when its numerator and denominator have no other common factors than 1.

Regular expressions are fractions with variables. In rational expressions, the numerator and denominator are polynomials. That is, it is of the form p(x)/q(x), where q(x) ≠ 0 and p(x) and q(x) are polynomials. Because regular expressions are nothing but fractions, we treat them as if they were fractions.

It is not possible to divide a number by 0. Check what 1/0 is with your calculator, it will return an error. Therefore, no regular expression is defined for variable values ​​with a denominator of 0 (because it is a fraction). For example, in the expression x / (x + 2), the denominator becomes zero when x = -2, so it is called the limit of the rational expression x / (x + 2). In other words, we say x / (x + 2) for all values ​​of x but x ≠ -2.

Simplifying a regular expression means reducing the value of a regular expression to its lowest term or simplified form. Simplifying regexps works the same way we simplify fractions. In fractions, a rational number is considered a simplified form when its numerator and denominator have no other common factors than 1. The same works for simplified rational expressions, but the only difference is that there are polynomials in the fraction. Let's see the steps to follow to simplify a regular expression.

Step 1: Factor each numerator and each denominator by taking the common factor.

Step 2: Cancel the common factor.

Step 3: Write the remaining terms in the numerator and denominator.

Step 4: Indicate limits, if any. Note that a constraint is any value that makes the denominator equal 0, including terms canceled during simplification.

Complete Question:

Simplify algebraic rational expressions, with numerators and denominators containing monomial bases with integer exponents, to equivalent forms.

Learn more about Denominator:

https://brainly.com/question/7067665

#SPJ4

We can see that p(p + 1)(p − 1) is not always divisible by 7, but it is always divisible by 5, 4, and 3. Thus, the correct answer is (G) 5.

A positive integer is a whole number greater than zero. In other words, it is a number that can be written without any fractional or decimal components, and is larger than zero. Positive integers are commonly denoted by the symbol "N" or "Z+".

A negative integer is a whole number less than zero. In other words, it is a number that can be written without any fractional or decimal components, and is smaller than zero. Negative integers are commonly denoted by the symbol "Z−".

In the given question,

We can simplify p(p + 1)(p − 1) as follows:

p(p + 1)(p − 1) = p(p² - 1) = p³- p

Now, we can consider the remainders when p is divided by each of the answer choices:

F. 7: If p = 7, then p³- p = 7³ - 7 = 342, which is not divisible by 7.

G. 5: If p = 5, then p³ - p = 5³ - 5 = 120, which is divisible by 5.

H. 4: If p = 4, then p³ - p = 4³ - 4 = 60, which is divisible by 4.

J. 3: If p = 3, then p³ - p = 3³ - 3 = 24, which is divisible by 3.

Therefore, we can see that p(p + 1)(p − 1) is not always divisible by 7, but it is always divisible by 5, 4, and 3.

Thus, the correct answer is (G) 5.

To know more about positive integers, visit:

https://brainly.com/question/18380011

#SPJ1

By using sample standard deviation - (1) N or n = 20

(2) X or μ = 43.4

(3) σ = 9.78 and s = 10.04

Why does sample standard deviation exist?

When we talk about a sample standard deviation, we're not talking about population standard deviation. The average amount by which a group of values deviates from their mean is shown by the statistical measure of variability known as the standard deviation.

We are given with the following data set below;

{51, 48, 42, 43, 48, 48, 46, 15, 29, 45, 47, 55, 46, 35, 47, 48, 54, 26, 53, 42}

(1) As we can see in the above data that there are 20 data values in our data set which means that the value of N or n (numner of observations) is 20.

(2) The formula for calculating Mean of the data, i.e. X or μ is given by;

       Mean  =  51 +48+ 42+ 43+ 48 + 48 + 46+ 15+ 29+ 45+ 47+ 55+ 46+ 35+ 47+ 48+ 54+ 26+ 53+ 42/20

                = 868/20 = 43.4

So, the value of  X or μ   is 43.4.

(3) The formula for calculating population standard deviation () is given by;

  Standard deviation, σ  = √(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20

        =  9.78

Similarly, the formula for calculating sample standard deviation (s) is given by;

       Sample Standard deviation, s =  

                       √(51 - 43.4)² + (48 - 43.4)² + .........+(42 - 43.4)²/20 - 1

                      =  10.04

Learn more about sample standard deviation

brainly.com/question/24277447

#SPJ1

The formula for the  temperature (T), number of gas molecules (n), volume (V), and pressure (P)  is found as: nR = 0.224 / 275.

While dealing with gas, a popular equation was utilized to relate the various components necessary to solve a gas problem. This same Ideal Gas Equation is the name given to this formula. We have always understood that there is no such thing as an ideal. Two well-known presumptions must have been made in this case in advance:

Those four gas variables are: temperature (T), number of gas molecules (n), volume (V), and pressure (P) . Last but not least, the following equation's constant, R, or the gas constant, will be covered in more detail later:

PV = nRT

PV/T = nR

Given data:

Putting the value;

nR = PV/T

nR = 10*0.0224 / 275

nR = 0.224 / 275

Thus, the formula for the  temperature (T), number of gas molecules (n), volume (V), and pressure (P)  is found as: nR = 0.224 / 275.

Know more about the universe gas law

https://brainly.com/question/27870704

#SPJ1

Answer:

Model D) a spinner with 6 equal sections can be used to simulate the contestant's chances of winning.

Step-by-step explanation:

A spinner with 6 equal sections represents the possible outcomes of the game show, where each section represents a possible win or loss. Since the contestant has a 1 in 6 chance of winning, the spinner would have one section representing a win and five sections representing a loss. Each spin of the spinner would represent one try at the game show, and the probability of winning can be determined by calculating the theoretical probability of landing on the win section.

To find the eigenvalues and eigenvectors of a matrix, we need to solve the equation Ax = λx, where A is the matrix, λ is the eigenvalue, and x is the eigenvector. In this case, we have a 3x3 matrix, so we expect to find three eigenvalues and three eigenvectors.

Without performing the calculations, it is difficult to determine the exact eigenvalues and eigenvectors of matrix D. However, based on the structure of the matrix, we can make some observations. We notice that the matrix has a repeating pattern of the number 5, which suggests that 5 is a dominant eigenvalue. Additionally, the matrix is symmetric, so we know that the eigenvectors will be orthogonal.

One possible approach to finding the eigenvectors is to use the Gram-Schmidt process, which is a method for orthogonalizing a set of vectors. We can start with a vector that is parallel to one of the columns of the matrix, and then subtract the projection of that vector onto the next column to obtain a vector that is orthogonal to the first. We can continue this process for each column to obtain a set of orthogonal vectors, which will be our eigenvectors.

Based on these observations, we can hypothesize that 5 is an eigenvalue of D and that we can find two linearly independent eigenvectors by using the Gram-Schmidt process on the columns of the matrix. However, we would need to perform the calculations to confirm this hypothesis and determine the exact values of the eigenvectors.

Find out more about eigenvectors

brainly.com/question/31115663

#SPJ4

The flow field is rotational because the curl of the velocity field is non-zero, which is calculated as (-b)k, where k is the unit vector in the z direction.

The velocity field V can be expressed as:

V = (u,v) = (U0+bx)i - (by)j

The flow is rotational if the curl of the velocity field is non-zero, i.e.:

∇ x V ≠ 0

Using the curl operator:

∇ x V = (∂v/∂x - ∂u/∂y)k

where k is the unit vector in the z direction.

Evaluating the partial derivatives:

∂v/∂x = 0, since v does not depend on x

∂u/∂y = -b, since the derivative of by with respect to y is -b

Therefore, the curl of the velocity field is:

∇ x V = (-b)k

Since the curl is non-zero, the flow field is rotational.

To know more about velocity:

https://brainly.com/question/14577390

#SPJ4

Answer:

What are the zeros of the function f(x)= 240x -2x^2

Step-by-step explanation:

To find the zeros of the function f(x) = 240x - 2x^2, we need to set f(x) equal to zero and solve for x:

240x - 2x^2 = 0

We can factor out 2x from the left side:

2x(120 - x) = 0

So either 2x = 0 or 120 - x = 0. Solving for x in each case gives:

2x = 0 => x = 0

120 - x = 0 => x = 120

Therefore, the zeros of the function are x = 0 and x = 120.

The value of the integral is (81/2) for method 1, (95/2) for method 2, and (375/2) for method 3.

To evaluate the integral (xz − y^3) dV over the region E = {(x, y, z) : −1 ≤ x ≤ 3, 0 ≤ y ≤ 2, 0 ≤ z ≤ 6}, we can use three different orders of integration

Method 1

Integrating with respect to x first

In this method, we integrate with respect to x first, then with respect to y, and finally with respect to z.

∫∫∫ (xz − y^3) dV = ∫0^6 ∫0^2 ∫−1^3 (xz − y^3) dx dy dz

= ∫0^6 ∫0^2 [(1/2)x^2z − xy^3]∣−1^3 dy dz

= ∫0^6 [4z − (27/2)z] dz

= (3/2) ∫0^6 z dz

= (81/2)

Method 2

Integrating with respect to y first

In this method, we integrate with respect to y first, then with respect to x, and finally with respect to z.

∫∫∫ (xz − y^3) dV = ∫0^6 ∫−1^3 ∫0^2 (xz − y^3) dy dx dz

= ∫0^6 ∫−1^3 [(1/2)xz y^2 − (1/4)y^4]∣0^2 dx dz

= ∫0^6 [(8/3)xz − (81/4)] dz

= (95/2)

Method 3

Integrating with respect to z first

In this method, we integrate with respect to z first, then with respect to x, and finally with respect to y.

∫∫∫ (xz − y^3) dV = ∫−1^3 ∫0^2 ∫0^6 (xz − y^3) dz dy dx

= ∫−1^3 ∫0^2 [(1/2)xz^2 − y^3z]∣0^6 dy dx

= ∫−1^3 [(54/2)x − (32/3)] dx

= (375/2)

Learn more about integration here

brainly.com/question/30404807

#SPJ4