select the correct statements regarding a liquid-gas system at equilibrium that is disturbed by adding or removing vapor from the system (at constant temperature). select all that apply. multiple select question. A. adding vapor will cause a temporary increase in vapor pressure. B. adding or removing vapor will result in a new equilibrium vapor pressure. C. when equilibrium is reestablished after a disturbance in a liquid-gas system, the vapor pressure will be the same. D. removing vapor will cause a temporary increase in the rate of condensation.

The appropriate unit for a third-order rate constant is  The L² mol-² s-¹. A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds.

A reaction rate constant, or reaction rate coefficient, k, quantifies the rate and direction of a chemical reaction in chemical kinetics. The rate constant, also known as the specific rate constant, is the proportionality constant in the equation expressing the relationship between the rate of a chemical reaction and the concentrations of the reactants.

A third-order reaction is a type of chemical reaction where the concentration of each molecular responding determines how quickly the reaction proceeds. Typically, the variation of three concentration factors in this reaction determines the rate.

There may be various cases involved when dealing with a third-order reaction. It might be;

(i) The concentrations of the three reactants are equal.

(ii) Two reactants are present in an equal amount, but one is present in a different amount.

(iii) The concentrations of the three reactants vary or are uneven.

Use formula,

(mol/L)¹⁻ⁿ s⁻¹

To know more about rate constant ,visit ;

brainly.com/question/20305871

#SPJ1

The value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.

The atomic mass of an element is defined as the mass of an atom of an element in atomic mass units (amu). One atomic mass unit is defined as 1/12th of the mass of an atom of carbon-12.

The atomic mass of an element can be calculated using the following formula:

Atomic mass = (mass of isotope 1 × % abundance of isotope 1) + (mass of isotope 2 × % abundance of isotope 2) + (mass of isotope 3 × % abundance of isotope 3) + ...

If the hot metal sample cooled off before it was transferred to the water in the calorimeter, the temperature of the sample would have decreased. The decrease in temperature would result in a decrease in the thermal energy of the sample. Consequently, the amount of heat absorbed by the water in the calorimeter would decrease, leading to a lower value of the heat capacity of the metal.

Since the heat capacity is directly proportional to the mass of the sample, a lower value of the heat capacity would lead to a higher value of the atomic mass of the metal calculated. Therefore, the value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.

Learn more about atomic mass here: https://brainly.com/question/3187640.

#SPJ11

The statement "enzymes reduce entropy of their substrates in reactions with multiple reactants" is possible because enzymes lower the activation energy of chemical reactions.

Enzymes are biocatalysts that are produced by living organisms. They can increase the rate of chemical reactions without being consumed during the process. Enzymes are proteins made up of chains of amino acids, and their function is determined by their three-dimensional shape.

Enzymes reduce the entropy of their substrates in reactions with multiple reactants. This is possible because they lower the activation energy of chemical reactions. By lowering the activation energy, enzymes make it easier for the reactants to react with one another. Enzymes make chemical reactions more efficient and faster than they would be without the enzyme.

The Arrhenius equation shows the dependence of the rate constant of a chemical reaction on the temperature, activation energy, and frequency factor. The frequency factor represents the frequency at which reactant molecules collide and produce products. When enzymes are present, the activation energy required for the chemical reaction is lowered, making the frequency factor and the rate constant of the reaction higher. This leads to an increase in the rate of the chemical reaction.

The equation is given as; k = Ae-Ea/RT,

Where

Learn more about enzymes: https://brainly.com/question/1596855

#SPJ11

a) an acid that produces one hydrogen atom. Monoprotic acid refers to an acid that donates only one hydrogen ion (H+) in an aqueous solution.

An acid that can only donate one hydrogen ion (H+) in an aqueous solution is referred described as being "monoprotic." This indicates that just one hydrogen ion may be emitted for each acid molecule. In contrast, polyprotic acids are able to contribute a number of hydrogen ions in solution.

Titration of a monoprotic acid solution with NaOH causes the NaOH to react with the acid's H+ ions to produce water and salt. The concentration of the acid may be calculated from the quantity of NaOH needed to fully neutralize the H+ ions in the acid solution.

Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).

learn about Monoprotic here:

https://brainly.com/question/18724098

#SPJ4

The condition that Carbon dioxide gas is most soluble in water is under: 4. low temperature and high pressure

Carbon dioxide gas is most soluble in water under conditions of low temperature and high pressure, which causes the gas molecules to dissolve more readily into the water molecules.

This is because the solubility of a gas in water is dependent on factors such as temperature, pressure, and the nature of the gas and solvent. At higher temperatures, the kinetic energy of the gas molecules increases, causing them to move more rapidly and escape from the water more easily, while at lower temperatures, the solubility of the gas increases.

Similarly, at higher pressures, more gas molecules are forced into contact with the water, increasing the likelihood of dissolution.

Learn more about carbon dioxide gas on:

https://brainly.com/question/11867819

#SPJ1

2.32 g of  CO2 will dissolve if the pressure is raised to 1. 35 atm and the temperature will remain the same.

The given data is:

Pressure = 1 atm

Temperature = 20 degrees =  293 K

CO2 weight = 1.72g

Water weight = 1L

Henry's law is used which defines that the amount of gas dissolved in a fluid is proportional to the partial pressure of the gas beyond the liquid.

Mathematically,

C = kH * P

C is the concentration of the gas given.

1.72 g CO2 / 44.01 g/mol = 0.039 mol CO2

C = 0.039 mol/L

kH = C/P

kH = 0.039 mol/L / 1 atm = 0.039 mol/(L*atm)

CO2 when the pressure is raised to 1.35 atm:

P' = 1.35 atm

C' = kH * P'

C' = (0.039 mol/(L*atm)) * 1.35 atm

C' = 0.0527 mol/L

The amount of CO2 dissolved in the water is

m = C' * M * V

m = 0.0527 mol/L * 44.01 g/mol * 1 L

m = 2.32 g

Therefore, a pressure of 1.35 atm is required and at a temperature of 20°C,  makes 2.32g of CO2 will dissolve.

To learn more about temperature problems

https://brainly.com/question/22736363

#SPJ4

The balanced equation for the neutralization reaction between oxalic acid (H2C2O4) and sodium hydroxide (NaOH) is H2C2O4 + 2NaOH → Na2C2O4 + 2H2O.

When oxalic acid (H2C2O4) reacts with sodium hydroxide (NaOH) in a neutralization reaction, it produces water (H2O) and sodium oxalate (Na2C2O4), a salt.

The balanced equation for this reaction is:

H2C2O4 + 2NaOH → Na2C2O4 + 2H2O

This balanced equation indicates that one molecule of oxalic acid reacts with two molecules of sodium hydroxide to produce one molecule of sodium oxalate and two molecules of water.

In this reaction, oxalic acid donates two hydrogen ions (H+) to the sodium hydroxide, which donates one hydroxide ion (OH-) to form water and sodium oxalate. The reaction is considered a neutralization reaction because the acid and base neutralize each other, resulting in the formation of salt and water.

learn more oxalic acid here:

https://brainly.com/question/11101969

#SPJ4

Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.

Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.

Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.

The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.

To learn more about "menthol", visit: brainly.com/question/21296029

#SPJ11

The precipitate that will form when a solution of aluminum chloride is mixed with a solution of potassium phosphate is aluminum phosphate (AlPO4).

When aluminum chloride and potassium phosphate are mixed together, the cations and anions form different combinations of ion pairs. This causes the precipitation of a solid phase (AlPO4) from the solution. The chemical reaction that occurs can be represented as follows:

3K3PO4 + 2AlCl3 → 6KCl + AlPO4

The aluminum ion (Al3+) in the aluminum chloride solution and the phosphate ion (PO43−) in the potassium phosphate solution combine to form a precipitate of aluminum phosphate (AlPO4). The resulting solid aluminum phosphate (AlPO4) will appear as a white or slightly yellowish powder. The solubility of AlPO4 in water is relatively low, with a solubility of about 0.06 grams per liter of water at room temperature (25°C).

Therefore, it will readily settle out of the solution as a solid mass, rather than remaining dissolved.

for such more question on aluminum phosphate

https://brainly.com/question/29732488

#SPJ11

Food fats and oils decay through a process known as rancidity, which affects the taste, texture, and flavour of the meal as well as the odour and smell. Unsaturated fatty acid oxidation is what triggers this process.

Rancidity is known to be influenced by time, temperature, light, air, exposed surface, moisture, nitrogenous organic material, and traces of metals.

Unsaturated fatty acids that contain double bonds in their molecules are peroxidation-prone. Lipids can undergo this peroxidation, often known as "oxidative degradation," in one of two ways. Autoxidation is one method, and it's by far the most significant one. A less significant alternative is an enzymatic oxidation. A fatty acid molecule undergoes oxidation when an oxygen ion replaces a hydrogen ion, and the likelihood of autoxidation rises as the number of double bonds increases inside the fatty acid.

Learn more about Rancidity here:

https://brainly.com/question/9861217

#SPJ4

The statements that are always true for a reaction at equilibrium are as follows:

I. The rate of the forward and reverse reactions are equal.

II. The concentrations of the reactants and the products remain constant.

III. The amount of reactants is equal to the amount of products.

The correct option is D) I, II, and III.

I. The rate of the forward and reverse reactions are equal

At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction. This means that there is no net change in the concentration of the reactants and products.

II. The concentrations of the reactants and the products remain constant

At equilibrium, the concentrations of the reactants and products remain constant. However, this does not mean that the concentrations of the reactants and products are equal. It only means that the concentrations remain constant.

III. The amount of reactants is equal to the amount of products

At equilibrium, the amount of reactants is equal to the amount of products. This means that the ratio of the concentrations of the products to the reactants, known as the equilibrium constant, is a fixed value.

Learn more about reaction at equilibrium here: https://brainly.com/question/18849238

#SPJ11

The volume occupied by 0.108 mol of helium gas at a pressure of 0.92 atm and a temperature of 313 K is 2.3 L.

The gas laws involve the relationship between the pressure, volume, and temperature of a gas. The ideal gas law can be used to determine the volume of gas that a certain amount of substance occupies at a particular pressure and temperature. The ideal gas law equation is:

PV = nRT

where, P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin (K).

To determine the volume of helium gas that is occupying 0.108 moles at 0.92 atm and 313 K, we need to rearrange the ideal gas law equation to solve for V:

V = (nRT)/P

Substituting the values given, we have:

V = (0.108 mol)(0.08206 L atm/mol K)(313 K)/(0.92 atm)

V = 2.28 L

The volume of gas to two significant figures, the volume is 2.3 L.

Learn more about Volume of gas here:

https://brainly.com/question/15265703

#SPJ11

Answer:

To determine the volume of oxygen gas needed to make an optimum mixture with 5 mL of hydrogen gas, we need to know the ratio of hydrogen to oxygen in the mixture.

The optimum ratio of hydrogen to oxygen for combustion is 2:1 by volume. This means that for every 2 volumes of hydrogen gas, we need 1 volume of oxygen gas.

Therefore, to calculate the volume of oxygen gas needed to make an optimum mixture with 5 mL of hydrogen gas, we can use the following formula:

volume of oxygen gas = (volume of hydrogen gas) / 2

Plugging in the values, we get:

volume of oxygen gas = (5 mL) / 2

volume of oxygen gas = 2.5 mL

So we would need 2.5 mL of oxygen gas to make an optimum mixture with 5 mL of hydrogen gas

In order to calculate the theoretical yield of sulfuric acid, we need to know the balanced chemical equation for the reaction between sulfur and oxygen to form sulfur trioxide, and then the reaction between sulfur trioxide and water to form sulfuric acid. The balanced chemical equation for these reactions are:

2S (s) + 3O2 (g) → 2SO3 (g)

SO3 (g) + H2O (l) → H2SO4 (aq)

From the equation, we can see that 3 moles of O2 are required to react with 2 moles of sulfur to produce 2 moles of SO3, and 1 mole of SO3 reacts with 1 mole of water to produce 1 mole of H2SO4.

Since the limiting reagent is 134.4 L of O2, we need to convert this volume to moles. To do this, we need to know the pressure, temperature, and the number of moles of O2 present. Assuming standard temperature and pressure (STP) of 0°C and 1 atm, the number of moles of O2 can be calculated using the ideal gas law:

PV = nRT

where P = 1 atm, V = 134.4 L, n = ?, R = 0.08206 L atm/mol K, and T = 273 K.

Solving for n, we get:

n = PV/RT = (1 atm)(134.4 L)/(0.08206 L atm/mol K)(273 K) = 5.29 mol O2

Since 3 moles of O2 are required to react with 2 moles of sulfur to produce 2 moles of SO3, the number of moles of SO3 produced is:

(2/3) × 5.29 mol = 3.53 mol

Since 1 mole of SO3 reacts with 1 mole of water to produce 1 mole of H2SO4, the number of moles of H2SO4 produced is:

3.53 mol H2SO4

Finally, we can convert the number of moles of H2SO4 to grams using the molar mass of H2SO4:

molar mass of H2SO4 = 2(1.008 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 98.08 g/mol

The theoretical yield of sulfuric acid is therefore:

3.53 mol H2SO4 × 98.08 g/mol = 345.7 g H2SO4

Therefore, the theoretical yield of sulfuric acid if the limiting reagent is 134.4 L of O2 is 345.7 g.

Learn more about theoretical yield from https://brainly.com/question/9809198

#SPJ1

At the onset of puberty, the pituitary gland in the brain starts secreting high pulses of hormones called gonadotropins.

The pituitary gland is a small, bean-shaped gland located at the base of the brain, in a small depression of the skull called the sella turcica. It is often referred to as the "master gland" because it controls and regulates the functions of several other glands in the body. The pituitary gland is divided into two main parts: the anterior pituitary and the posterior pituitary.

The pituitary gland produces and releases several hormones, including growth hormone, thyroid-stimulating hormone, adrenocorticotropic hormone, follicle-stimulating hormone, luteinizing hormone, prolactin, and oxytocin. These hormones play critical roles in regulating growth and development, metabolism, reproduction, and the body's response to stress.

To learn more about Pituitary gland visit here:

brainly.com/question/12499901

#SPJ4

DNA polymerase differs from RNA polymerase being that the former synthesizes a double stranded DNA while the latter synthesizes a single stranded RNA.

Polymerase is generally any of various enzymes that catalyze the formation of polymers of DNA or RNA using an existing strand of RNA or DNA respectively as a template.

DNA and RNA polymerase are enzymes responsible for the process of DNA and RNA replication i.e. copy of two identical DNA/RNA molecules from a single strand.

Both DNA polymerase and RNA polymerase share the same end goal i.e. synthesizing nucleic acid in the cell. However, DNA polymerase produces double stranded DNA, whereas RNA polymerase produces single stranded RNA.

Learn more about about polymerase at: https://brainly.com/question/29377728

#SPJ1

The average mass of chemistrium (Ch) in amu is: 12.5 amu.

Chemistrium is an element with the atomic number 106. It is a transactinide synthetic element with an atomic weight of 268 u. Until 2009, this element was known as unnilhexium (Unh). It was named chemistrium in honor of the chemistry in recognition of the Moscow-based Joint Institute for Nuclear Research's contributions to the synthesis of new elements.

If a sample of the element chemistrium (Ch) contains 100 atoms of Ch-12 and 10 atoms of Ch-13 (for a total of 110 atoms in the sample), the average mass of chemistrium in amu can be calculated as follows:

Average mass of Ch = [(number of atoms of Ch-12 x atomic weight of Ch-12) + (number of atoms of Ch-13 x atomic weight of Ch-13)] / Total number of atoms of Ch= [(100 x 12.000000) + (10 x 13.003355)] / 110= [1200.0000 + 130.03355] / 110= 1330.03355 / 110= 12.18212318 amu, which is rounded off to 12.5 amu.

Learn more about element: https://brainly.com/question/25608430

#SPJ11

The equation that allows you to calculate the mass of sodium in 1.5 grams of sodium chloride correctly is

Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na =.

The mass of the sodium can be calculated with the aid of a mole ratio from the sodium chloride (NaCl). We will need to apply stoichiometric mole ratios to convert between the number of atoms, ions, or molecules in a reaction and the mass or volume of the reactants and goods.

To calculate the mass of sodium in 1.5 grams of sodium chloride, we need to use the following formula:

Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na =

As we can see from the equation, the mass of sodium is determined by multiplying a mol ratio by the number of grams of sodium chloride used.

Answer: A. Mol NaCI / 58.44 g NaCI X mol Na / NaCI X 22.99 g Na / mol Na

to know more about stoichiometry refer here:

https://brainly.com/question/30215297#

#SPJ11

Lithium chloride (LiCl) has a higher melting point than hydrogen chloride (HCl) because of the differences in their structures and bonding.

Melting point is the temperature at which a solid substance changes state from a solid to a liquid. At the melting point, the solid and liquid phases of a substance are in equilibrium, and further heating will cause the entire solid to melt into a liquid. The melting point of a substance is a physical property that is dependent on the chemical structure and bonding of the substance.

Lithium chloride is an ionic compound composed of positively charged lithium ions (Li+) and negatively charged chloride ions (Cl-). The ionic bond between these ions is very strong because of the large difference in their electronegativities. This results in a highly ordered, crystalline structure with strong electrostatic attractions between the ions, requiring a lot of energy to break apart the ionic lattice, which results in a high melting point.

In contrast, hydrogen chloride is a covalent compound composed of hydrogen and chlorine atoms that share electrons to form a bond. This type of bond is not as strong as the ionic bond found in LiCl because the electronegativities of hydrogen and chlorine are relatively close, resulting in a less polar covalent bond.

Therefore, HCl has a weaker intermolecular force, which makes it easier to break the attractive forces between molecules, requiring less energy to melt.

Learn about melting point here  https://brainly.com/question/25074953

Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.

Learn more about sodium chloride: https://brainly.com/question/28106660

#SPJ11

b. The temperature of the equilibrium mixture is increased at constant volume. The number of moles of CO (g) in the container will increase when the temperature is increased. The equation given is an exothermic reaction, so increasing the temperature favors the reaction to the right, releasing heat energy and producing more moles of CO (g).

The given equilibrium equation is CO (g) + H2(g) <--> C(s) + H2O (g) ∆H˚ = -131 kJ. The question asked to determine whether the number of moles of CO (g) in the container will increase, decrease or stay the same for different disturbances.

b. The temperature of the equilibrium mixture is increased at constant volume. When the temperature is increased at constant volume, the equilibrium will shift towards the product side in order to counteract the increase in temperature. Since CO (g) is a reactant, the number of moles of CO (g) will decrease after the disturbance is applied, so the correct answer is "decrease."

c. The volume of the container is decreased at constant temperature.

When the volume of the container is decreased at constant temperature, the pressure inside the container will increase, which will cause the equilibrium to shift towards the side with fewer gas moles to counteract the increase in pressure. CO (g) has one gas mole, and H2O (g) and H2 (g) have two gas moles. Therefore, the equilibrium will shift towards the side with fewer gas moles, which is the product side. This means that the number of moles of CO (g) will decrease, so the correct answer is "decrease."

d. The graphite pellets are pulverized. When the graphite pellets are pulverized, the surface area of C(s) will increase. This will increase the rate of reaction from the reactant side to the product side. The reaction will continue until the equilibrium is reestablished, but the number of moles of CO (g) will not change, so the correct answer is "stay the same." Therefore, the correct answer is b. The temperature of the equilibrium mixture is increased at constant volume.

To know more about volume, click on the below link:

https://brainly.com/question/1578538

#SPJ11

Components that are typically included when citing a journal article are, volume or issue number, author(s), name of journal, page number(s), year of publication are typically included when citing a journal article. The correct choices are a, b, c, d, e.

The abstract, comments, and conclusions may or may not be included depending on the citation style and the specific requirements of the report. When citing a journal article in a laboratory report, it is important to include certain components to provide enough information for the reader to locate the article.

The name of the journal in which the article was published should be included, as well as the volume and issue number (if applicable) and the page numbers of the article within the journal. This information helps to identify the specific article within the publication. The author or authors of the article should also be included, typically in the format of last name followed by initials. The year of publication is also important information to include.

To know more about journal articles, here

brainly.com/question/21114475

#SPJ4

There are two possible constitutional isomers in the dichlorination of propane. These are 1,2-dichloropropane and 1,3-dichloropropane.

1,2-dichloropropane has a chlorine atom on each of the first two carbon atoms of the propane chain. The structural formula is CH3CHClCH2Cl. 1,3-dichloropropane has a chlorine atom on the first and third carbon atoms of the propane chain. The structural formula is CH3CH2CHCl2.

The reason for there being only two constitutional isomers is due to the symmetry of the propane molecule. The carbon chain has two identical ends, and so adding two chlorine atoms will result in either the 1,2 or 1,3 positions on the chain.

To learn more about constitutional isomers, here

https://brainly.com/question/30826773

#SPJ4

The answer that comes closest to the result is the letter b. However, the exact number is 9.86 x 10²⁶  CaCl₂ formula units applied per mile.

To solve this, we need to calculate how much CaCl₂ (calcium chloride) is being applied.

To do this, we can use the conversion factor 1 lb = 453.6 g. We are given that 400 lb of CaCl₂ is applied per mile of highway. This is equal to 400 x 453.6 g = 181,440 gCaCl₂ applied per mile.

We also know that the molar mass of CaCl₂ is 110.98 g/mol. This means that 181,440 g CaCl₂ = (181,440 g)/ (110.98 g/mol) = 1,640 mol CaCl₂ applied per mile.

Finally, we can calculate the number of formula units of CaCl₂ applied. This is equal to the number of moles of CaCl₂ applied multiplied by Avogadro's number (6.02 x 10²³). Therefore, 1,640 molCaCl₂ applied per mile is equal to 1,640 x 6.02 x 10²³ = 9.86 x 10²⁶  CaCl₂ formula units applied per mile.

read about formula units

https://brainly.com/question/24529075

#SPJ11

When 27 g of iron reacts with oxygen, a total of 8 electrons are transferred.

The balanced equation for this reaction is:  
4Fe + 3O2 → 2Fe2O3

This equation tells us that 4 moles of iron (Fe) react with 3 moles of oxygen (O2) to form 2 moles of iron oxide (Fe2O3).

Molar mass of iron = 55.85 g/mol.

The number of moles: 27 g Fe × (1 mol Fe/55.85 g Fe) = 0.483 mol Fe

Therefore, 27 g of iron is equivalent to 0.483 moles of iron.

0.483 mol Fe × 4 electrons/mol Fe = 1.932 electrons

To convert this value to the number of electrons per 27 g of iron. To do this, we can use Avogadro's number, which tells us the number of particles (including electrons) in one mole of a substance:

1.932 electrons/mol × 6.022 × 10^23 electrons/mol = 1.162 × 10^24 electrons ≈ 8

Therefore, the number of electrons transferred when 27 g of iron reacts is approximately 8.

To know more about iron click here:

https://brainly.com/question/30570319

#SPJ11

17.264 g of 2KI (potassium iodide) is necessary to completely react with 17.3 g of Pb(NO3)2 in a precipitation reaction.

To calculate the mass of the first reactant required, we will use the mole concept.

Let's first write the balanced chemical equation.

A 2KI(aq) + Pb(NO₃)₂ (aq) → PbI₂(s) + 2KNO₃(aq)

We need to find the number of moles of Pb(NO₃)₂.

To do that, we will use the given mass of Pb(NO₃)₂ and its molar mass.

Molar mass of Pb(NO₃)₂ = 207.2 + 3(14.01) + 6(16) = 331.2 g/mol

Number of moles of Pb(NO₃)₂ = mass / molar mass = 17.3 / 331.2 = 0.052 moles

From the balanced chemical equation, we see that 1 mole of Pb(NO₃)₂ reacts with 2 moles of KI.

Therefore, the number of moles of KI required would be twice the number of moles of Pb(NO₃)₂.

The number of moles of KI required = 2 x 0.052 = 0.104 moles

To calculate the mass of KI required, we will use its molar mass.

The molar mass of KI = 39.10 + 126.90 = 166.0 g/mol

Mass of KI required = a number of moles x molar mass = 0.104 x 166.0 = 17.264 g

Therefore, 17.264 g of KI is required to completely react with 17.3 g of Pb(NO₃)₂.

Learn more about the calculation of grams here:

https://brainly.com/question/28902645

#SPJ11

It is difficult to answer this question without more information about the 4 compounds mentioned. However, based on the statement given, if a compound has a smaller HOMO-LUMO energy gap, it means that it requires less energy to excite an electron from the HOMO to the LUMO orbital.

As a result, such a compound would absorb light of a longer wavelength compared to compounds with larger HOMO-LUMO energy gaps, which require more energy to promote an electron.

Therefore, if compound "v" has the smallest HOMO-LUMO energy gap among the 4 compounds mentioned, it is likely that it would absorb light of a longer wavelength compared to the other compounds.

For more questions like wavelength visit the link below:

https://brainly.com/question/29448414

#SPJ11

The given figure is shown below:

Given figure from which shaft A is made of AISI 1020 hot-rolled steel, is welded to a fixed support and is subjected to loading by equal and opposite forces F via shaft B.

A theoretical stress-concentration factor Kts of 1.6 is induced by the 1/8" fillet. The length of shaft A from the fixed support to the connection at shaft B is 2 ft. The load F cycles from 150 t0 500 lbf. To find:

Factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A.

Solution: The factor of safety for infinite life can be given by the following formula:

Factor of safety for infinite life= σ′ut1.5σ′a + σm

Here, σm = (σ1+σ2)/2= (800+400)/2= 600 psi

σa = (σ1-σ2)/2= (800-400)/2= 200 psi

σ′ut = σut/Kf= 64000/1.5 = 42666.67 psi

The alternating stress (σa) can be obtained as follows:

The force F can be given as,F= 150 + 350sin(πn/60) …(i)Where n is the rotational speed in rpm. For the given data, n= 1800 rpm.

Substituting the values, we get,

F= 150 + 350sin(π×1800/60)= 500 lb

Substituting the values of force and cross-sectional area of shaft A, we get,

σa= 4F/πd²= 4×500/π×0.25²= 4080 psi

Thus, substituting the above values in the formula of factor of safety, we get,

Factor of safety for infinite life= σ′ut1.5

σ′a + σm= 42666.67/1.5×4080 + 600= 4.23

Hence, the factor of safety for infinite life using the modified Goodman fatigue failure criterion using the von Mises combined stress approach for shaft A is 4.23.

To learn more about "von mises", visit: https://brainly.com/question/13440986

#SPJ11

The electronic configuration for an atom of oxygen is:

1s2 2s2 2p2

The correct options is:

C. This specific electron configuration has one unpaired electron.

Electron configuration can be defined as the specific arrangement of negatively charged electrons in different energy levels around atomic nuclei.

The correct statements about this electron configuration are:

A. The atom of oxygen represented by this configuration will have a charge: This statement is incorrect. The electron configuration provided is for a neutral oxygen atom, which means it has no charge.

B. This specific electron configuration has three unpaired electrons: This statement is incorrect. The 2p subshell contains a total of 4 electrons, which are arranged in 2 orbitals with opposite spins. This means that there are 2 paired electrons and 2 unpaired electrons, not 3.

C. This specific electron configuration has one unpaired electron: This statement is correct. The 2p subshell contains 2 orbitals, each of which can hold a maximum of 2 electrons. Since the 2p subshell contains 4 electrons, there are 2 paired electrons and 2 unpaired electrons, with one unpaired electron in each of the two 2p orbitals.

Learn more about electronic configuration:

https://brainly.com/question/26084288

#SPJ11

A 3.6102 M HI solution has a pH of 1.44. A 9.23102 M HClO4 solution has a pH of 0.036. The mass-based solution with 1.01% HCl has a pH of 2.09 in water.

The concentration of hydrogen ions (H+) in a solution determines the pH, which is a measurement of the solution's acidity or basicity. The pH values of various solutions are measured in the examples provided. Strong acids, HI and HClO4, are present in the first two solutions. Due to its lower pH, HI is a stronger acid than HClO4. The third solution, which comprises a combination of HClO4 and HCl and is weaker than the previous two because of its higher pH level, contains HCl. The pH of the final solution, which contains 1.01% HCl by mass, is 2.09, showing that it is a weak acid.

learn more about solution here:

https://brainly.com/question/30665317

#SPJ4