Rina is climbing a mountain. She has not


yet reached base camp. Write an inequality


to show the remaining distance, d, in feet


she must climb to reach the peak.

Answer:

$2300

Step-by-step explanation:

$1610 is 7/10 the original cost. Multiplying by 10/7 reverses that, and we get the starting cost of $2300

Hope this helps!

Answer:

a) To make x the subject of equation (2), we need to isolate x on one side of the equation. We can do this by adding 2 to both sides, and then dividing both sides by 6:

x - 2 = 6y

x = 6y + 2

b) We can now substitute the expression 6y + 2 for x in equation (1):

6y + 2 - 2y = 10

Simplifying the left-hand side, we get:

4y + 2 = 10

Subtracting 2 from both sides, we get:

4y = 8

Dividing both sides by 4, we get:

y = 2

Now we can substitute y = 2 back into either equation to find x. Let's use equation (2), since we have already rearranged it to make x the subject:

x = 6y + 2

x = 6(2) + 2

x = 14

Therefore, the solution to the simultaneous equations is x = 14 and y = 2.

Step-by-step explanation:

The antenna which is having an angle of elevation 71° from the front of the it is on is 19.67 feet tall to the nearest tenth of foot.

The angle of elevation is the angle between the horizontal line and the line of sight which is above the horizontal line.

To get the height of the antenna, we subtract the height of the building from the height from the bottom of the building to the top of the antenna.

we shall represent the distance from the point of observation to the building with x and the height from the bottom of the building to the top of the antenna with y. so that;

tan 68° = 125/x {opposite/adjacent}

x = 125/ tan 68° {cross multiplication}

x = 50.5033

tan 71° = y/50.5033

y = 50.5033 × tan 71°

y = 144.6722

height of the antenna = 144.6722 - 125

height of the antenna = 19.6722

Therefore, the antenna which is having an angle of elevation 71° from the front of the it is on is 19.67 feet tall to the nearest tenth of foot.

Know more about angle of elevation here:https://brainly.com/question/2096694

#SPJ1

The mean, median, and mean absolute deviation MAD of the data are 15%, 10%, and 8%.

To find the mean, median, and mean absolute deviation (MAD) of the data, we need to first convert all the fractions to percentages:

Whitney: 16%

Chen: 8%

Bjorn: 6%

Dustin: 2%

Philip: 12%

Maria: 40%

a) Mean:

To find the mean, we add up all the percentages and divide by the total number of friends (6):

Mean = (16 + 8 + 6 + 2 + 12 + 40) / 6 = 15%

Therefore, the mean is 15%.

b) Median:

To find the median, we need to arrange the data in order from smallest to largest:

2%, 6%, 8%, 12%, 16%, 40%

Since there are six values, the median is the average of the two middle values: (8 + 12) / 2 = 10%

Therefore, the median is 10%.

c) Mean Absolute Deviation (MAD):

To find the MAD, we first need to find the absolute deviation of each value from the mean:

Whitney: |16 - 15| = 1%

Chen: |8 - 15| = 7%

Bjorn: |6 - 15| = 9%

Dustin: |2 - 15| = 13%

Philip: |12 - 15| = 3%

Maria: |40 - 15| = 25%

Next, we find the average of these absolute deviations:

MAD = (1 + 7 + 9 + 13 + 3 + 25) / 6 = 8%

Therefore, the mean absolute deviation is 8%.

Learn more about the mean, median, and mean absolute deviation at

https://brainly.com/question/29167658

#SPJ4

The statement about systematic errors that is true is: They can occur when a selection bias is present.

Systematic errors can be defined as a type of error that affects the accuracy of the results of an experiment or study. It is mostly caused by the tools, materials, or a particular problem with the instrument used in the experiment. A systematic error can be of different types, including the following:

Scale Error: Scale errors occur due to calibration issues. They can occur due to a problem with the measuring instruments, which may not provide accurate readings during an experiment.

Selection Bias: It occurs when a researcher deliberately selects a certain group of individuals or data that are not representative of the general population. This can lead to inaccurate results for the study.

Resolution Error: This error is common when researchers do not choose the correct measurement tools to measure the variables of interest.

Therefore, option A is correct. This is because systematic errors can occur when a selection bias is present.

To learn more about selection bias refer :

https://brainly.com/question/30888396

#SPJ11

The weight becomes 1/4 of its original value when the distance is multiplied by 2.

According to the question, "the weight of a body above the surface of the earth is inversely proportional to the square of its distance from the center of the earth." We need to determine the effect on the weight when the distance is multiplied by 2.

Let w be the weight of a body, d be the distance from the center of the earth, and k be the constant of variation. According to the question,

w = k / d²

When the distance is multiplied by 2, the new distance is 2d. Therefore, the new weight is given by:

w' = k / (2d)²

w' = k / 4d²

w' = w / 4

Therefore, the weight becomes 1/4 of its original value when the distance is multiplied by 2.

To learn more about weight refer :

https://brainly.com/question/30825684

#SPJ11

Answer:

(2, 0) and (-1, 0)

Step-by-step explanation:

[tex]4x^2 - 4x - 8 = 0 \text{ // Divide by 4} \\x^2 - x - 2 = 0\\\\x_{1, 2} = \frac{-(-1) \pm \sqrt{(-1)^2 - 4 \times 1 \times (-2)}}{2\times1}\\\\x_{1, 2} = \frac{1 \pm \sqrt{1 + 8}}2\\\\x_{1, 2} = \frac{1 \pm \sqrt9}2\\\\x_{1, 2} = \frac{1 \pm 3}2\\\\x_1 = \frac{1 + 3}2 = \frac42 = 2\\\\x_2 = \frac{1 - 3}2 = \frac{-2}2 = -1[/tex]

Therefore, the zeroes are (2, 0) and (-1, 0).

The probability that a randomly selected quartz timepiece will have a replacement time less than 13.3 years is approximately 0.015 with a mean of 17 years and a standard deviation of 1.7 years.

To find the probability that a randomly selected quartz timepiece will have a replacement time of less than 13.3 years, we need to use the standard normal distribution formula which is as follows:

[tex]Z =\frac{X -μ }{σ}[/tex]

Where Z is the standard score

X is the variable value

μ is the mean

σ is the standard deviation

Given that the mean (μ) of the replacement times for the quartz timepieces is 17 years, the standard deviation (σ) is 1.7 years, and the variable value (X) we are looking for is 13.3 years.

Substitute the values into the standard normal distribution formula to get:

[tex]Z = \frac{13.3-17}{1.7} = -2.17[/tex]

Looking at the standard normal distribution table, we can find the probability of the standard score Z = -2.17 to be 0.015.

Therefore, the probability that a randomly selected quartz timepiece will have a replacement time less than 13.3 years is approximately 0.015.

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

We can construct the 95% confidence interval for the true proportion. To do this, we need to calculate the margin of error, which is equal to the critical value (1.96) multiplied by the standard error (0.014). This equals 0.028.

The 95% confidence interval is then the sample proportion (0.38) plus or minus the margin of error (0.028). This is [tex](0.38 - 0.028, 0.38 + 0.028) = (0.352, 0.408).[/tex]

The test statistic in this case is the Z-statistic, as we are assuming that the underlying population is normally distributed. To conduct the hypothesis test, we must first state the null and alternative hypotheses.

Null Hypothesis (H0): The proportion of students at the school who fear public speaking is equal to or greater than 40%.
Alternative Hypothesis (H1): The proportion of students at the school who fear public speaking is less than 40%.

We must then calculate the test statistic, which is the Z-statistic in this case. To do this, we need to first calculate the sample proportion, which is the number of students who fear public speaking (137) divided by the total number of students surveyed (361). This equals 0.38. We then need to calculate the standard error of the sample proportion (SE), which is the square root of [tex](pq/n)[/tex], where p is the sample proportion (0.38) and q is the complement of the sample proportion (1-0.38 = 0.62). SE = [tex](0.38 x 0.62)/361 = 0.014.[/tex] The Z-statistic is then calculated as the difference between the sample proportion (0.38) and the population proportion (0.40) divided by the standard error [tex](0.014). Z = (0.38 – 0.40)/0.014 = -0.14.[/tex]

To conclude, we can use the Z-statistic and 95% confidence interval to test the hypothesis that the proportion of students at the school who fear public speaking is less than 40%. The Z-statistic of -0.14 falls within the critical region and the 95% confidence interval does not include 0.40, suggesting that the proportion of students at the school who fear public speaking is indeed less than 40%.

for such more questions on  statistic

https://brainly.com/question/15525560

#SPJ11

Eventually, the differential equation's general solution is:

y = y_h + y_p

y = c1e^(-2x) + c2e^(-x) - (1/6)e^(-x) + (2/3)

In the context of differential equations, the homogeneous solution of a differential equation is a solution that satisfies the equation when the right-hand side is equal to zero.

To find the particular solution of y'' + 3y' + 2y = 4e^x using the variation of parameters method, we first find the homogeneous solution of the differential equation by setting the right-hand side to zero:

y'' + 3y' + 2y = 0

The characteristic equation is r^2 + 3r + 2 = 0, which factors as (r + 2)(r + 1) = 0. Therefore, the solutions are y_h = c1e^(-2x) + c2e^(-x), where c1 and c2 are constants.

Next, we find the Wronskian of the homogeneous solution:

W(y1, y2) = |e^(-2x) e^(-x) | = e^(-3x)

To find the particular solution, we assume that it has the form y_p = u1(x)e^(-2x) + u2(x)e^(-x), where u1(x) and u2(x) are unknown functions to be determined.

We then find y_p' and y_p'':

[tex]y_p' = u1'(x)e^(-2x) + u2'(x)e^(-x) - 2u1(x)e^(-2x) - u2(x)e^(-x)y_p'' = u1''(x)e^(-2x) + u2''(x)e^(-x) - 4u1'(x)e^(-2x) - 2u2'(x)e^(-x) + 4u1(x)e^(-2x) + u2(x)e^(-x)u1''(x)e^(-2x) + u2''(x)e^(-x) + u1'(x)e^(-2x) + u2'(x)e^(-x) - 4u1'(x)e^(-2x) - 2u2'(x)e^(-x) + 4u1(x)e^(-2x) + u2(x)e^(-x) = 4e^x[/tex]

Simplifying and grouping terms, we get:

[tex]u1''(x)e^(-2x) - 3u1'(x)e^(-2x) + u2''(x)e^(-x) - u2'(x)e^(-x) = 4e^x[/tex]

To solve for u1(x) and u2(x), we use the method of undetermined coefficients and assume that they are both linear combinations of the exponential function and its derivative:

u1(x) = A(x)e^x

u2(x) = B(x)e^(2x)

Substituting these expressions into the previous equation and solving for A(x) and B(x), we get:

A(x) = -e^x/6

B(x) = 2e^x/3

Therefore, the particular solution is:

[tex]y_p = (-e^x/6)e^(-2x) + (2e^x/3)e^(-x)y_p = (-1/6)e^(-x) + (2/3)[/tex]

Eventually, the differential equation's general solution is:

y = y_h + y_p

y = c1e^(-2x) + c2e^(-x) - (1/6)e^(-x) + (2/3)

Therefore, the particular solution of the given differential equation y′′+3y′+2y=4ex is

[tex]y(x)=c_1e^{-x} + c_2e^{-2x} - 4 + 2e^{x}.[/tex]

To know more about solution visit:

https://brainly.com/question/30480414

#SPJ1

Answer:

Confident or forceful behaviour

Step-by-step explanation: I have a dictionary

Growth models like those used in ForecastX usually model situations well where a process grows at an exponential rate. Which is (C).

What is ForecastX?

ForecastX is forecasting software that is used for business purposes. It is simple to use and allows you to forecast your sales, income, or other metrics. ForecastX allows you to create accurate and reliable forecasts using automated time series analysis, a method of forecasting that incorporates historical data to make predictions about the future.

The speed or frequency of something is referred to as the rate. A rate is a ratio that compares two values in different units. The term "rate" is used to describe any ratio that specifies how one quantity varies with respect to another quantity.

Growth models like those used in ForecastX usually model situations well where a process grows at an exponential rate.

To know more about ForecastX: https://brainly.com/question/30900556?source=archive

#SPJ11

The differential equation for the number of dogs D(t) who have contracted the virus is A. dD/dt=kD(40−D), where k is the constant of proportionality.

This equation describes the rate of change of the number of infected dogs with respect to time. The term kD represents the rate at which the virus spreads due to interactions between infected dogs and healthy dogs. The term (40-D) represents the number of healthy dogs that could potentially become infected.

The product of these two terms, kD(40-D), represents the rate of change of the number of infected dogs, dD/dt. This differential equation is a classic example of a logistic growth model, which describes how populations grow and eventually level off due to limiting factors such as limited resources or the spread of disease.

For more questions like Equation click the link below:

https://brainly.com/question/16663279

#SPJ11

The correct answer is A. a-c+b-d=0. This is because when two sets of numbers are both negative, the result of subtracting the larger number from the smaller number will always be negative.

Subtraction involves taking one number or value away from another. It is one of the four basic operations in mathematics, along with addition, multiplication, and division.

When subtracting a from c and b from d, the result of either subtraction will always be a negative number. When the two negative numbers are added together, the result will always be 0.

The other options are not always true. In option B, ac > bd, this is not always true because when a, b, c, and d are all negative, it is possible for the result of ac to be less than the result of bd. In option C, a+c>b+d, this is not always true because when both sets of numbers are negative, it is possible for the result of a+c to be less than b+d. Finally, in option D, a/d < b/c, this is not always true because when both sets of numbers are negative, it is possible for the result of a/d to be greater than b/c.

For more questions related to subtraction

https://brainly.com/question/13378503

#SPJ1

The correct answer is A. a-c+b-d=0 because the expression is always true when a, b, c and d are all less than zero.

Expression is a combination of symbols and operators that evaluate to a single value. It could be a mathematical equation, an arithmetic expression, a logical expression, or a combination of these.

This is because the expression is equivalent to (a-c)+(b-d)=0, which is always true when a, b, c and d are all less than zero.

This can be proven through a simple calculation.

Let us assume that the values of a, b, c and d are -1, -3, 8 and -4 respectively.

Substituting these values into the expression gives us

(-1-3)+(8-4)=0, which is clearly true.

Therefore, A. a-c+b-d=0 is the correct answer as the expression is always true when a, b, c and d are all less than zero.

For more questions related to arithmetic expression

https://brainly.com/question/29525069

#SPJ1

The approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis is 67.59 square units.

To solve the question, we can use the integration capabilities of a graphing utility to approximate to two decimal places the area of the surface formed by revolving the polar equation over the given interval about the polar axis. Polar curve is a type of curve that is made up of points that represent polar coordinates (r, θ) instead of Cartesian coordinates.

A polar curve can be represented in parametric form, but it is often more convenient to use the polar equation for a curve. According to the question, r = 7 cos(20), [0, Phi/4] is the polar equation and we need to find the approximate area of the surface formed by revolving the polar equation over the given interval about the polar axis.

To solve the problem, follow these steps: Convert the polar equation to a rectangular equation. The polar equation r = 7 cos(20) is converted to a rectangular equation using the following formulas: x = r cos θ, y = r sin θx = 7 cos (20°) cos θ, y = 7 cos (20°) sin θx = 7 cos (θ - 20°) cos 20°, y = 7 cos (θ - 20°) sin 20°

Sketch the curve in the plane. We can sketch the curve of r = 7 cos(20) by plotting the points (r, θ) and then drawing the curve through these points. Use the polar equation to set up the integral for the volume of the solid of revolution.

The volume of the solid of revolution is given by the formula: V = ∫a b πf2(x) dx where f(x) = r, a = 0, and b = Φ/4.We can find the volume of the solid of revolution using the polar equation: r = 7 cos(20) => r2 = 49 cos2(20) => x2 + y2 = 49 cos2(20)Thus, f(x) = √(49 cos2(20) - x2) = 7 cos(20°) sin(θ - 20°)

So, V = ∫a b πf2(x) dx = ∫0 Φ/4 π(7 cos(20°) sin(θ - 20°))2 dθStep 4: Use a graphing utility to evaluate the integral to two decimal places. Using a graphing utility to evaluate the integral, we get V ≈ 67.59.

Learn more about Interval

brainly.com/question/30486507

#SPJ11

The standard normal distribution is a bell-shaped curve that has a mean of 0 and a standard deviation of 1.

Standard deviation is a measure of how spread out numbers are. It is a measure of the amount of variation or dispersion from the average. For a data set, it is calculated as the square root of the variance. It is calculated by taking the square root of the variance (the average of the squared differences from the mean). The standard deviation can tell you how much variation there is from the average (mean) value in a data set.

The unit normal table is a statistical tool used to calculate probabilities related to the standard normal distribution. The standard normal distribution is a bell-shaped curve that has a mean of 0 and a standard deviation of 1. This table provides the probability of a given score falling within a certain range of the mean of the normal distribution.

For example, in part (a) the question is asking for the proportion between the mean and z = 1.96. Using the unit normal table, we can find this proportion to be 0.975. This means that 97.5% of the scores fall between the mean and z = 1.96.

In part (b), the question is asking for the proportion between the mean and z = 0. Since z = 0 is the mean, this proportion is 0.500, meaning that 50% of the scores fall between the mean and z = 0.

In part (c), the question is asking for the proportion between z = −1.90 and z = 1.90. This proportion can be found in the unit normal table to be 0.954. This means that 95.4% of the scores fall between z = −1.90 and z = 1.90.

To know more about standard deviations click-
https://brainly.com/question/475676
#SPJ1




Complete questions as follows-
Using the unit normal table, find the proportion under the standard normal curve that lies between the following values. (Round your answers to four decimal places.)

(a) the mean and

z = 1.96


1

(b) the mean and

z = 0


2

(c)

z = −1.90 and z = 1.90


3

(d)

z = −0.40 and z = −0.30


4

(e)

z = 1.00 and z = 2.00


5

the area of the triangle KLM is 4.9 cm².

Area is the region bounded by a plane shape.

To calulate the area of the triangle, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the area is 4.9 cm².

Learn more about area here: https://brainly.com/question/28470545

#SPJ1

Answer:

Step-by-step explanation:

Perimeter

Pls mark me brainliest

The probability that at least 2 people believe that they have seen a ufo is 0.1937102445. The probability that exactly 1 person believes that he or she has seen a ufo is problem: P(X = 1) = 10C₁ (0.10) (0.90)⁹= 0.3874204890.

The probability that at least 2 people believe that they have seen a UFO would be 0.1937102445. For this we use the binomial distribution formula.

P(X ≥ 2) = 1 − P(X = 0) − P(X = 1)P(X = 0) = (9/10)¹⁰

P(X = 1) = 10C₁ (0.10) (0.90)⁹= 0.3874204890 (rounded to 10 decimal places)

P(X ≥ 2) = 1 − 0.3874204890 − 0.3486784401 = 0.1937102445 (rounded to 10 decimal places)

The probability that 2 or 3 people believe that they have seen a UFO would be 0.1937102445. Using the formula of binomial distribution again we can solve for the probability of this event.

P(2 ≤ X ≤ 3) = P(X = 2) + P(X = 3)P(X = 2) = 10C₂ (0.10)² (0.90)⁸= 0.1937102445 (rounded to 10 decimal places)

P(X = 3) = 10C₃ (0.10)³ (0.90)⁷= 0.0573956280 (rounded to 10 decimal places)

P(2 ≤ X ≤ 3) = 0.1937102445 + 0.0573956280 = 0.2511058725 (rounded to 10 decimal places)

The probability that exactly 1 person believes that he or she has seen a UFO would be 0.3874204890. Using the binomial distribution formula to solve this problem:

P(X = 1) = 10C₁ (0.10) (0.90)⁹= 0.3874204890 (rounded to 10 decimal places)

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

By using this value of x in the formula we previously discovered, we can get the patio's area Patio's size is equal to x2 + 4x + 4 = ((1 + 7)/3)2 + 4((1 + 7)/3) + 4 = 4.72 square meters.

A square is a 2D shape with equal-sized sides on each side. The area would be length times width, which is equal to side  side because all the sides are equal. As a result, a square's area is side square.

Let's first find the area of the entire rectangle:

A = lw = (3x + 6)(2x + 4) = 6x² + 30x + 24

Area of patio = (x + 2)² = x² + 4x + 4

Area of herb garden = (2x + 2)(x + 4) = 2x² + 10x + 8

Area of flower garden = (3x + 4)(x + 4) = 3x² + 16x + 16

Sum of areas = x² + 4x + 4 + 2x² + 10x + 8 + 3x² + 16x + 16

= 6x² + 30x + 28

0.25(6x² + 30x + 24) = 6x² + 30x + 28

Simplifying and solving for x, we get:

1.5x² - x - 1 = 0

Using the quadratic formula, we find that:

x = (1 ± √7)/3

x = (1 + √7)/3

To know more about square visit:-

https://brainly.com/question/14198272

#SPJ1

The area in square meters of the patio is 850 square meters.

What is a rectangle?

A rectangle is a geometric shape that has four sides and four right angles (90 degrees) with opposite sides being parallel and equal in length.

Let's start by calculating the total area of the rectangle:

Area of rectangle = length x width = 100m x 40m = 4000 square meters

Now, let's denote the width of the herb garden as x meters. Then, the length of the herb garden would be 10 meters.

The area of the herb garden would be:

Area of herb garden = length x width = 10m x x = 10x square meters

The area of the patio can be calculated as:

Area of patio = (100 - x) x (40 - 2x) square meters

(100 - x) is the length of the patio, and (40 - 2x) is the width of the patio, since the herb garden takes up x meters of the width.

The area of the flower garden can be calculated by subtracting the area of the rectangle, the herb garden, and the patio from each other:

Area of flower garden = 4000 - 10x - (100 - x) x (40 - 2x) square meters

Now, we need to find the value of x so that the sum of the areas of the patio, herb garden, and flower garden is 25% of the area of the entire rectangle. In other words:

Area of herb garden + Area of patio + Area of flower garden = 0.25 x Area of rectangle

10x + (100 - x) x (40 - 2x) + 4000 - 10x = 0.25 x 4000

Simplifying this equation, we get:

-2x^2 + 30x + 1000 = 1000

-2x^2 + 30x = 0

-2x(x - 15) = 0

Therefore, x = 0 or x = 15. Since x cannot be 0 (since the herb garden would have no width), the value of x must be 15 meters.

Now we can calculate the area of the patio:

Area of patio = (100 - x) x (40 - 2x) = (100 - 15) x (40 - 2(15)) = 850 square meters

Therefore, the area in square meters of the patio is 850 square meters.

To learn more about rectangle from the given link:

https://brainly.com/question/29123947

#SPJ1

Answer:

9

Step-by-step explanation:

To find the answer to this question, we have to find 3/4 of 12

To do this, we need to do 12 divide by 4, then that answer multiplied by 3...

This means that she took 9 drinks!

Hope this helps, have a lovely day! :)

Answer:

9

Step-by-step explanation:

[tex] multiply \: \\ = \frac{3}{4} \times 12[/tex]

[tex] = 9[/tex]

Therefore, sally took 9 drink for her party.

Pls like and mark as brainliest if it helps!

Answer:

One of the most common mistakes students make when working with sequences and functions is misunderstanding the difference between the two. Sequences refer to a list of numbers or terms that follow a specific pattern, while functions are mathematical rules that relate one set of numbers to another. This confusion often arises because some sequences can be described by functions, but not all functions describe sequences.

To avoid this mistake, students should first understand the definitions of sequences and functions and practice identifying whether a given problem involves a sequence or a function. They should also pay attention to the language used in the problem and look for keywords that indicate whether they are dealing with a sequence or a function. Finally, they should practice using different methods to solve problems involving sequences and functions, including graphing, table-building, and algebraic manipulation, to gain a better understanding of the relationships between numbers in a sequence or a function.

On solving the question we can say that Therefore, the solutions to the inequality given inequality are: x < 4 or x > 6.

An inequality in mathematics is a relationship between two expressions or values ​​that are not equal. Imbalance therefore leads to inequality. An inequality establishes a connection between two values ​​that are not equal in mathematics. Equality is different from inequality. The inequality sign () is most commonly used when two values ​​are not equal. Various inequalities are used to contrast values, no matter how small or large. Many simple inequalities can be solved by changing both sides until only variables remain. But many things contribute to inequality.

two inequalities

4x - 6 < 10

4x < 16

x < 4

2x - 4 > 8

2x > 12

x > 6

Therefore, the solutions to the given inequality are:

x < 4 or x > 6.

To know more about inequality visit:

https://brainly.com/question/29914203

#SPJ1

To determine the probability of a continuous distribution we use the integral to determine it and for the normal distribution the integral is not so simple, for that reason it is simpler to use range values from tables.

Probability can be determined from a continuous distribution in the following way:To compute the probability of a given interval for a continuous random variable, the area under the curve over the interval is determined. Integrals are used to calculate this area under the curve, which can be done either numerically or analytically using probability density functions.

For some distributions, such as the uniform distribution, calculating the area under the curve is straightforward. However, for other distributions, such as the normal distribution, it can be more difficult to calculate the integral analytically.

The normal distribution is a continuous probability distribution that is frequently used in statistics. It is defined by its probability density function, which is a bell-shaped curve with a mean and a standard deviation.

Calculating the area under the curve for the normal distribution requires the use of integrals. Integrals are difficult to solve analytically for the normal distribution because the probability density function is not simple. However, it is relatively simple to calculate the probability for a given range of values using standard statistical tables or computer software.

See more about probability distribution at: https://brainly.com/question/23286309

#SPJ11

Answer:

To simplify the expression (-3+1)+(-4-i), we can perform the addition operation within the parentheses first:

(-3+1)+(-4-i) = -2 + (-4-i)

Next, we can simplify the addition of -2 and -4 by adding their numerical values:

-2 + (-4-i) = -6 - i

Therefore, (-3+1)+(-4-i) simplifies to -6-i.

Step-by-step explanation:

Answer:15 percent

Step-by-step explanation:

Answer:

The ratio of red to blue squares in the given set of 2 reds and 18 blues can be written as:

Red:Blue = 2:18

To simplify the ratio, we can divide both the numerator and denominator by the greatest common factor (GCF) of 2 and 18, which is 2. Dividing both terms by 2, we get:

Red:Blue = 1:9

Therefore, the ratio of red to blue squares in its simplest form is 1:9.

Compute P(x ≤ 15) = (15-10)/(20-10) = 5/10 = 0.5.

Compute P(12 ≤ x ≤ 18) = (18-12)/(20-10) = 6/10 = 0.6.

Compute E(x): The expected value of x is: E(x) = (a+b)/2 = (10+20)/2 = 15

Compute Var(x):The variance of x is: Var(x) = (b - a)^2/12 = (20 - 10)^2/12 = 100/12 = 8.33.

The probability density function is as follows: As the random variable x is uniformly distributed between 10 and 20. Thus, f(x) = 1/(20-10) = 1/10 for 10 ≤ x ≤ 20.Compute P(x ≤ 15):Thus, P(x ≤ 15) = (15-10)/(20-10) = 5/10 = 0.5.Compute P(12 ≤ x ≤ 18):Thus, P(12 ≤ x ≤ 18) = (18-12)/(20-10) = 6/10 = 0.6.Compute E(x):The expected value of x is: E(x) = (a+b)/2 = (10+20)/2 = 15.Compute Var(x):The variance of x is: Var(x) = (b - a)^2/12 = (20 - 10)^2/12 = 100/12 = 8.33.

Learn more about Random Variable

brainly.com/question/17238189

#SPJ11