The question is: "Part A When 25.00 mL of 0.0500 M HBr is titrated with 0.100 M NaOH, which of the following is correct for this titration? A. Initially the pH will be less than 1.00. B. The pH at the equivalence point will be 7.00, C. It will require 12.50 mL of NaOH to reach the equivalence point. Assume that the HBr solution is in the titrating flask where the pH is monitored and the NaOH is added from a buret."
Explanation: The correct answer is A and C only. Initially, the pH of the HBr solution will be less than 1.00, and it will require 12.50 mL of NaOH to reach the equivalence point, at which the pH will be 7.00.
The correct answer for the question is as follows:A and C onlyWhen 25.00 mL of 0.0500 M HBr is titrated with 0.100 M NaOH, which of the following is correct for this titration?When 25.00 mL of 0.0500 M HBr is titrated with 0.100 M NaOH, the following is correct for this titration:Initially the pH will be less than 1.00. (A)It will require 12.50 mL of NaOH to reach the equivalence point. (C)Assume that the HBr solution is in the titrating flask where the pH is monitored and the NaOH is added from a buret. (A)The correct option is A and C only.Let's discuss the pH of HBr:Brønsted-Lowry defined acid as "any species that donates a hydrogen ion (H+) to another species".HBr, for example, is an acid since it donates a hydrogen ion to a base to form its conjugate base, Br-.Furthermore, pH is defined as "the negative logarithm of the concentration of hydrogen ions (H+)". Initially, when NaOH is added to HBr, the pH will be less than 1.00.When the equivalence point is reached, all of the HBr has reacted with the NaOH, and the resultant solution contains NaBr and water only. At this point, the pH is 7.00.NaOH and HBr react in a 1:1 ratio; thus, the volume of NaOH required to reach the equivalence point is equivalent to the volume of HBr. Since 25.00 mL of HBr is titrated with 0.100 M NaOH, 12.50 mL of NaOH is required to reach the equivalence point.
For more such questions on titration
https://brainly.com/question/186765
#SPJ11
In this titration, HBr, a strong acid, is being titrated with NaOH, a strong base. At the start of the titration, only HBr is present in the solution. options A and B are partially correct, while option C is incorrect.
As NaOH is added, it reacts with HBr in a 1:1 stoichiometric ratio to form water and NaBr. The point at which all the HBr has reacted with NaOH is called the equivalence point.Option A states that initially, the pH will be less than 1.00. This is correct because HBr is a strong acid, and its initial concentration is 0.0500 M. Strong acids completely dissociate in water, leading to a high concentration of H+ ions and a low pH. Therefore, the initial pH of the solution will be less than 1.00.Option B states that the pH at the equivalence point will be 7.00. This is incorrect because the reaction between HBr and NaOH will result in the formation of NaBr and water, which are neither acidic nor basic. Therefore, the pH at the equivalence point will be neutral, but not necessarily 7.00.Option C states that it will require 12.50 mL of NaOH to reach the equivalence point. This is incorrect because we do not have enough information to determine the volume of NaOH required to reach the equivalence point. However, we do know that the stoichiometric ratio between HBr and NaOH is 1:1, so the volume of NaOH required to reach the equivalence point will be equal to the volume of HBr initially added to the solution, which is 25.00 mL.For such more question on acid
https://brainly.com/question/25148363
#SPJ11
What is the minimum and maximum number of studies and literatures in literature review?
Generally, a literature review should aim to provide a comprehensive and up-to-date overview of the existing research and scholarly literature relevant to the research question or topic. This means that the number of studies or literatures included in a literature review will depend on factors such as the breadth and depth of the research question, the availability and relevance of existing research, and the scope of the research project.
It is important to ensure that the literature review is well-organized, critically analyzed, and clearly presented, regardless of the number of studies or literatures included. The focus should be on selecting high-quality and relevant sources, rather than simply aiming for a specific number of sources. A literature review should provide a thorough synthesis and analysis of the existing literature, and should demonstrate a clear understanding of the key debates, trends, and findings in the field.
Testing for Alcohols & Carboxylic Acids
1. The presence of a primary or secondary alcohol can be confirmed by reaction with acidified potassium
dichromate solution which changes colour from orange to green.
a) State the name formula of the reagent used to test for the presence of a primary/secondary alcohol.
b) State the colour change observed when this reagent reacts with an alcohol.
c) What type of compound is produced by the oxidation of a primary alcohol?
d) What type of compound is produced by the oxidation of a secondary alcohol?
e) Explain why the dichromate test does not work for tertiary alcohols such as methylpropan-2-ol.
Include the chemical structure of methylpropan-2-ol in your explanation.
2.a) Describe a simple chemical test for the presence of a carboxylic acid group in a molecule.
Reagent:
Observation:
b) Describe how you would confirm that the gas produced in this test is carbon dioxide.
c) Explain why, for a completely unknown compound, the hydrogencarbonate test is not conclusive proof
that a carboxylic acid group is present.
Answer:
a) Acidified potassium dichromate solution is used to test for the presence of a primary or secondary alcohol.
b) The orange color of the potassium dichromate solution is reduced to green when it reacts with an alcohol.
c) The oxidation of a primary alcohol produces a carboxylic acid.
d) The oxidation of a secondary alcohol produces a ketone.
e) The dichromate test does not work for tertiary alcohols because they cannot be further oxidized. Methylpropan-2-ol is a tertiary alcohol with the chemical structure:
CH3
|
CH3—C—OH
|
CH3
Since there are no hydrogen atoms attached to the carbon atom bearing the hydroxyl group, it cannot be oxidized.
a) A simple test for the presence of a carboxylic acid group is the addition of sodium hydrogencarbonate solution to the compound. The reagent reacts with the carboxylic acid to produce carbon dioxide gas.
Reagent: Sodium hydrogencarbonate solution
Observation: Effervescence (bubbling) due to the release of carbon dioxide gas.
b) To confirm that the gas produced in the hydrogencarbonate test is carbon dioxide, it can be tested with limewater. Carbon dioxide turns limewater milky/cloudy due to the formation of calcium carbonate.
c) The hydrogencarbonate test is not conclusive proof that a carboxylic acid group is present in a completely unknown compound because some other functional groups such as phenols and alcohols can also react with the reagent and produce carbon dioxide. Therefore, additional tests such as the dichromate test or Tollens' test may be needed to confirm the presence of a carboxylic acid group.
(please could you kindly mark my answer as brainliest and a follow would be really nice)
which statement is true about chemical equilibrium constant keq? group of answer choices A. a keq larger than 1 means the reaction favors toward the reactant side. B. a large keq means the reaction rate is very fast. C. for a specific reaction at a fixed temperature, there can be more than one keq value. D. a keq larger than 1 means the reaction favors toward the product side. E. to calculate keq, we can use the initial concentration to calculate the value.
The statement that is true about the chemical equilibrium constant K eq is: A K eq larger than 1 means the reaction favors toward the product side.
When a chemical reaction occurs, it does not continue indefinitely; rather, it reaches a point at which the forward and reverse reactions occur at the same rate, and this is referred to as chemical equilibrium.
Chemical equilibrium refers to the point at which a reaction has reached a point at which the concentrations of the reactants and products no longer change over time,
implying that the forward and reverse reactions are occurring at the same rate.
K eq = ([C]^c[D]^d)/([A]^a[B]^b)
Where [A], [B], [C], and [D] represent the concentrations of the reactants and products, respectively, and a, b, c, and d represent the stoichiometric coefficients of the reactants and products.
The K eq value is a measure of the degree to which a reaction is likely to proceed.
The magnitude of the K eq value provides information about the position of the equilibrium, the extent of the reaction, and the relative concentration of reactants and products.
A K eq value greater than 1 indicates that the reaction is favored in the forward direction (product formation) at equilibrium,
whereas a K eq value less than 1 indicates that the reaction is favored in the reverse direction (reactant formation).
A K eq value of 1 indicates that the reactants and products are present in roughly equal proportions at equilibrium.
to know more about equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
equal masses of two substances absorb the same amount of heat. the temperature of substance a increases twice as much as the temperature of substance b. which substance has the higher specific heat?
The substance with the higher specific heat is Substance B. Specific heat is the amount of energy required to raise the temperature of a unit mass of a substance by one degree Celsius.
What is the substance with higher specific heat?Since equal masses of two substances absorb the same amount of heat, the substance with the higher specific heat will require more energy to raise its temperature by one degree Celsius, meaning that it will experience a smaller increase in temperature when the same amount of heat is applied. In this case, since Substance A's temperature increased twice as much as Substance B's, Substance B has the higher specific heat.
When two substances have the same mass and absorb the same amount of heat energy, the substance with the lower specific heat will have a higher temperature increase. Therefore, if the temperature of substance A increases twice as much as the temperature of substance B, it means that the specific heat of substance A is lower than the specific heat of substance B.
The formula for specific heat is given as follows:
Q = mcΔT
where, Q is the amount of heat energy added or removed, m is the mass of the substance, c is the specific heat of the substanceΔT is the change in temperature.
Therefore, if Q and m are the same for both substances, then the ratio of their temperature changes is given by:
ΔTA/ΔTB = cB/cA
Since the temperature of substance A increased twice as much as substance B, it means that ΔTA = 2ΔTB. Therefore, we can substitute these values in the above formula and get:
2 = cB/cA⇒ cA = cB/2
Since the specific heat of substance A is half of the specific heat of substance B, it means that substance A has a lower specific heat as compared to substance B.
Read more about the temperature here:
https://brainly.com/question/24746268
#SPJ11
Iron nail wrapped with copper wire Determine the standard reduction potential of the cathode half-reaction, the standard reduction potential of the anode half-reaction, and the standard potential of the cell. E°cathode ____
(V) E° anode ___ (V) E° cell ___ (V)
The standard reduction potential of the cathode half-reaction is -0.36V,
The standard reduction potential of the anode half-reaction is +0.34V,
and the standard potential of the cell is -0.02V.
The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):
Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.
The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):
Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:
E°cell = E°cathode - E°anode
= -0.36V - (+0.34V)
= -0.02V.
Learn more about the standard potential of the cell here:
https://brainly.com/question/19036092
#SPJ11
Predict the product(s) obtained when benzoquinone is treated with excess butadiene:
When benzoquinone is treated with excess butadiene, the products obtained are 2,5-dimethylcyclohexadiene-1,4-dione and cyclohexene.
What is benzoquinone?Benzoquinone is also known as 1,4-benzoquinone or cyclohexa-2,5-diene-1,4-dione, is a colorless organic compound. The presence of two carbonyl groups in its structure provides it its characteristic quinone chemistry.
Butadiene, also known as 1,3-butadiene, is a conjugated diene. The reaction between benzoquinone and butadiene is called a Diels-Alder reaction.
The Diels-Alder reaction is a conjugate addition reaction that joins a diene and a dienophile to create a new six-membered ring. The most important characteristic of the Diels-Alder reaction is its stereospecificity. This reaction occurs between a cyclic diene and an alkene or alkyne dienophile.
The products obtained when benzoquinone is treated with excess butadiene are:2,5-dimethylcyclohexadiene-1,4-dioneCyclohexeneThe reaction proceeds with the dienophile (benzoquinone) being attacked by the diene (butadiene) in the Diels-Alder reaction to produce a cyclic adduct. The product is 2,5-dimethylcyclohexadiene-1,4-dione. Cyclohexene is formed as a byproduct of the reaction.
Learn more about Benzoquinone here:
https://brainly.com/question/15014857
#SPJ11
Dolostone is composed of the mineral dolomite, which is similar to calcite in limestone, except that dolomite contains_____
a. Iron
b. Aluminium
c. Silica
d. Magnesium
Dolostone is composed of the mineral dolomite, which is similar to calcite in limestone, except that dolomite contains magnesium.
Dolostone, also known as dolomite rock, is a sedimentary rock composed mainly of the mineral dolomite. Dolomite, a calcium magnesium carbonate mineral, is the primary component of dolostone, making up around 90-95 percent of the rock. Dolostone is a rock that is similar to limestone and is often mistaken for it.
Read more about the topic of carbonate rocks:
https://brainly.com/question/12971138
#SPJ11
understand what are the effects when there is low [s], high [s], and when vo is one half of the vmax. biochem]
The effect of low [s] is that the rate of the reaction will decrease and the effect of high [s] is that the rate of the reaction will increase. When Vo is one-half of Vmax, the effect is that the reaction has reached its half-maximum velocity, or that the reaction has reached its maximum efficiency.
The rate of the reaction will decrease in the case of low [s] as the substrate concentration is too low to support the reaction. On the other hand, the rate of reaction will increase in the case of high [s] as there is a greater amount of substrate to drive the reaction.
To understand these effects in a better way, we can use the Michaelis-Menten equation to calculate the rate of reaction at various substrate concentrations (Vo and Vmax) and also the reaction's maximum velocity (Vmax):-
V = Vmax[S]/(Km + [S])
Where Vmax is the maximum velocity of the reaction, Km is the Michaelis constant, and [S] is the concentration of the substrate.
Learn more about Vmax:
https://brainly.com/question/14529099
#SPJ11
Which are the factors that favor SN2 react a) Strong nucleophile, good leaving group, polar protic solver b) Strong nucleophile, good leaving group. c) Weak nucleophile, good leaving group, po d) Strong nucleophile, poor leaving group, po ors that favor SN2 reactions, as described during the lab lecture? aving group, polar protic solvent, methyl or primary halide. e, good leaving group, polar aprotic solvent, methyl or primary halide. o, good leaving group, polar aprotic solvent, methyl or primary halide. phile, poor leaving group, polar aprotic solvent, tertiary halide. uong nucleophile, good leaving group, polar aprotic solvent, tertiary halide. 4. Which alkyl halide reacts fastest with trimethylamine in SN2 reaction? a) CI
The factors that favor SN2 reactions are Strong nucleophile, good leaving group, polar aprotic solvent, methyl or primary halide.
SN2 reactions require a strong nucleophile, good leaving group, polar aprotic solvent, and a methyl or primary halide. The reason for this is that SN2 reactions occur in a single step, with the nucleophile attacking the substrate and the leaving group departing at the same time. When the nucleophile approaches the substrate, it must be in a good orientation to cause an SN2 reaction.The best orientation for SN2 reactions occurs when the substrate is methyl or primary, the solvent is polar aprotic, the nucleophile is strong, and the leaving group is good. When the leaving group departs, it must be able to do so quickly, so a good leaving group is required. Finally, the solvent must be polar aprotic, which means that it can stabilize negative charges while not inhibiting the reaction by solvating the substrate.
The nucleophile attacks the substrate from the rear in order for this reaction to continue. The angle of the nucleophile's approach to the supplied substrate with respect to the carbon-leaving group bond is 180o. Through a transition state, the carbon-nucleophile bond forms and the carbon-leaving group bond dissolves simultaneously.
The needed product is now created when the leaving group is forced out of the transition state on the other side of the carbon-nucleophile connection. It's crucial to remember that the product is created by inverting the tetrahedral geometry at the central atom.
For more such questions on SN2 reactions , Visit:
https://brainly.com/question/25175580
#SPJ11
how many years does it take for plastic to decompose
Answer: how many years does it take for plastic to decompose?
Well, it depends on the plastic, regular plastic can take up to 20 years to decompose, however, plastic bottles can take up to 450 years to decompose.
20pcm3 og a gas has a pressure of 510mmhg what will be the volume of the pressure is increased to 780mmhg, assuming there is no change in temperature
The volume of the gas will decrease from 20 cm³ to 13.08 cm³.
What is Boyle's law?Boyle's law is a gas law that states that the product of the pressure and volume of a gas is constant at constant temperature.
What is the significance of assuming no change in temperature in this problem?Assuming no change in temperature is significant because it allows us to apply Boyle's law to solve the problem. If the temperature were to change, we would need to use a different gas law, such as Charles's law or the combined gas law, to account for the change in temperature.
We can use Boyle's law to solve this problem, which states that the product of the pressure and volume of a gas is constant at constant temperature. Mathematically, we can express this as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.
Using this equation, we can solve for V₂:
P₁V₁ = P₂V₂
V₂ = (P₁V₁)/P₂
Substituting the given values, we get:
V₂ = (510 mmHg x 20 cm³) / 780 mmHg
V₂ = 13.08 cm³
Therefore, if the pressure is increased from 510 mmHg to 780 mmHg at constant temperature, the volume of the gas will decrease from 20 cm³ to 13.08 cm³.
Learn more about Boyle's law here:
https://brainly.com/question/30367133
#SPJ1
Density and molar mass of gases 0.96 g of a gas occupies a volume of 0.672L at STP (0°C and 1atm). What is the identity of the gas: O N2 or CO2?
The calculated molar mass of 32 g/mol is the same as the molar mass of oxygen. Thus, the gas is O2.
What is the identity of gas?Let us determine the molar mass of this gas. We can begin with the density of the gas as follows:
Density = mass/volume
Density = 0.96 g/0.672 L
Density = 1.43 g/L
We know that at STP (standard temperature and pressure), temperature is 0°C and pressure is 1 atm. We can use these values to determine the molar volume of a gas, which is 22.4 L.
Molar volume = 22.4 L at STP
Thus,
1 mole of gas occupies 22.4 L at STP
We can determine the number of moles of the gas as follows:
Number of moles = volume/molar volume
Number of moles = 0.672 L/22.4 L/mol
Number of moles = 0.03 mol
The molar mass can be determined using the following formula:
molar mass = mass/number of moles
molar mass = 0.96 g/0.03 mol
molar mass = 32 g/mol
The calculated molar mass of the gas is 32 g/mol. Now let us compare this molar mass with the molar mass of the given gases.
Oxygen (O2) has a molar mass of 32 g/mol
The calculated molar mass of 32 g/mol is the same as the molar mass of oxygen. Therefore, the identity of the gas is O2.
Learn more about Gases here:
https://brainly.com/question/1467765
#SPJ11
in this experiment, you will use universal indicator to qualitatively measure ph. the universal indicator in this experiment is a mixture of 4 common indicators allowing for a large ph range to be measured. the following table (also available in your lab manual) describes the individual components of our universal indicator. universal indicator components indicator low ph color transition ph range high ph color thymol blue (1st transition) red 1.2 - 2.8 yellow methyl red red 4.4 - 6.2 yellow bromothymol blue yellow 6.0 - 7.6 blue thymol blue (2nd transition) yellow 8.0 - 9.6 blue phenolphthalein colorless 8.3 - 10.0 fuchsia select all of the following statements that are true about the universal indicator. group of answer choices at ph 1.2, the indicator will appear red. the universal indicator is a single chemical compound. the universal indicator (or parts thereof) are in equilibrium and have an associated k value. at a ph 7, the indicator will appear colorless.
At PH 1.2, the indicator will appear red.
Universal indicator- The universal indicator is a mixture of 4 common indicators allowing for a large pH range to be measured.
At pH 7, the indicator will appear yellow due to bromothymol blue. The universal indicator (or parts thereof) are in equilibrium and have an associated K value.
K value- The K value indicates the amount of products and reactants present in the reaction. It is an equilibrium ratio of the concentration of products and the reactants.
A universal indicator is made by mixing bromomethyl, methyl orange and phenolpthalein in alcohol.
To learn more about "universal indicator", visit: https://brainly.com/question/2953080
#SPJ11
1. calculate the final concentration of sodium azide and dcmu in the locomotion chambers. show your work. The DCMU is a 10mM concentrationThe Sodium Azide is a 1M concentration.If you add 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU what is the final concentration of DCMU?If you add 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 1M Sodium Azide what is the final concentration of DCMU?
The final concentration of DCMU in the locomotion chambers will be 0.1 mM. If 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.
To Calculate the final concentration of Sodium Azide and DCMU in the locomotion chambers. The final concentration of Sodium Azide in the locomotion chambers will be 10mM (millimolar) if 10mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 1M (molar) Sodium Azide is added.
The final concentration of DCMU (3-(3,4-dichlorophenyl)-1,1-dimethylurea) in the locomotion chambers will be 0.1 mM (millimolar) if 10 mL (milliliters) of the Chlamydomonas, 100 μL (microliters) of sterile water, and 100 μL of 10 mM (millimolar) DCMU are added.
Calculating the final concentration of DCMU:
Formula: C1V1 = C2V2C1 = initial concentration of DCMU = 10 mMV1 = volume of DCMU added = 100 μL (microliters)C2 = final concentration of DCMU = ?V2 = final volume = 10 mL + 100 μL + 100 μL = 10.2 mL
(convert 100 μL to mL by dividing it by 1000)
Substituting the values in the formula:
C1V1 = C2V210 mM x 100 μL = C2 x 10.2 mL1000 (since 1 mL = 1000 μL)C2 = 0.098 mM (millimolar) = 0.1 mM (approx.)
Thus, the final concentration of DCMU in the locomotion chambers will be 0.1 mM if 10mL of the Chlamydomonas, 100 microliters of sterile water, and 100 microliters of 10mM DCMU is added.
For more such questions on concentration , Visit:
https://brainly.com/question/28564792
#SPJ11
Select the correct molecule that is the main product of the Calvin cycle.
1. G3P
2. NADPH
3. Glucose
The molecule that is the main product of the Calvin cycle is glucose. The Calvin cycle is also known as the light-independent reactions.
It is a series of biochemical reactions that occur in the stroma of the chloroplast in photosynthetic organisms to produce glucose. The Calvin cycle is made up of three stages: Carbon fixation, Reduction and regeneration of ribulose bisphosphate. Here's a breakdown of each stage:
Carbon fixation: Carbon dioxide enters the Calvin cycle and is converted to organic molecules. During carbon fixation, Rubisco, which is a crucial enzyme in photosynthesis, catalyzes the reaction between carbon dioxide and ribulose bisphosphate, leading to the formation of a six-carbon molecule that splits into two three-carbon molecules. This three-carbon molecule is the starting material for the reduction process.
Reduction: The ATP and NADPH produced during the light-dependent reactions are used to convert the three-carbon molecule produced during carbon fixation into glyceraldehyde-3-phosphate. This process involves a series of biochemical reactions that require the use of energy from ATP and electrons from NADPH.
Regeneration of ribulose bisphosphate: Glyceraldehyde-3-phosphate, which is the main product of the Calvin cycle, is used to regenerate the starting material for carbon fixation, ribulose bisphosphate. During this stage, ATP is used to convert the remaining glyceraldehyde-3-phosphate molecules into ribulose bisphosphate. The Calvin cycle is an essential process in photosynthesis, as it produces glucose, which is the main source of energy for plants and other photosynthetic organisms.
For more such questions on glucose , Visit:
https://brainly.com/question/397060
#SPJ11
What is the purpose of the one balloon larger in size than the other balloons? o to represent unoccupied space in a molecule to represent any pair of electrons - bonding or lone pair to represent the space lone pairs occupy in a molecule Submit Request Answer
The balloon that is one size larger than the others serves to symbolise the area in a molecule inhabited by lone pairs of electrons, signifying unshared electron pairs in a particular region.
The Lewis structure is a chemical model that depicts how atoms and valence electrons are arranged in a molecule. The atoms are represented by symbols, and the valence electrons, which are the electrons at the highest energy level, are shown as dots or lines. In organic chemistry, the bigger balloon often designates a region of a molecule where electrons are not shared with any other atoms or groups. The structure and reactivity of the molecule are impacted by this region, which is referred to as a lone pair. The wider balloon makes it easier to see where these unshared electron pairs are located and how they affect the molecule's overall structure and behaviour.
learn more about lone pairs here:
https://brainly.com/question/30886923
#SPJ4
salts are composed of both cations and anions, both of which can potentially affect ph. which of the following salts would you test if you wanted to observe how just anions affect ph? group of answer choices nach3coo cacl2 nahco3 tris-hcl na2co3 nh4cl
The salt which you would test if you wanted to observe how just anions affect pH is Na2CO3.
What is salt? Salts are inorganic compounds made up of a cation and an anion. Salts are formed by the neutralization of an acid with a base, for example, hydrochloric acid and sodium hydroxide form table salt: NaCl. The cation is typically a metal or a positively charged organic compound, whereas the anion is generally a non-metal or a negatively charged organic compound. The salt's properties are a function of the cation and anion and are hence unique.
Salt's effect on pH: Salts are made up of cations and anions, both of which can have an impact on pH. Cations and anions can both have an impact on the pH of the solution, but they can do it in different ways. The pH of a solution can be affected by the anion of the salt since it can act as a base or an acid. The pH of a solution can be affected by the cation of the salt since it can act as an acid or a base. For instance, if we dissolve copper sulfate in water, the pH of the solution will be acidic since the sulfate ion will be hydrolyzed to create sulfuric acid, H2SO4.
However, if we dissolve sodium carbonate in water, the pH of the solution will be basic because the carbonate ion acts as a base, picking up H+ ions from water molecules to generate HCO3- ions. Hence, Na2CO3 is the salt which you would test if you wanted to observe how just anions affect pH.
To learn more about "cations and anions", visit: https://brainly.com/question/28971609
#SPJ11
A gas with a constant volume had an original pressure of 1150 torr and a temperature of 75.0 ℃. Pressure was decreased to 760 torr. What is the final temperature of the gas?a. -43.0 ℃b. 49.6 ℃c. 230 ℃d. -251 ℃
Answer:
A gas with a constant volume had an original pressure of 1150 torr and a temperature of 75.0 ℃. Pressure was decreased to 760 torr. What is the final temperature of the gas?a. -43.0 ℃b. 49.6 ℃c. 230 ℃d. -251 ℃
How many atoms are in 0.75mol of H2O
There are approximately 4.5 x 10^23 atoms in 0.75 mol of H2O.
Or 4,500,000,000,000,000,000,000.
3. Assertion (A): There is a small gap left between the rails of a railway track
Reason (R): Cooling of substances result in contraction.
Both A and R are true but R is not the correct explanation of A
A is false but R is true
b.
c. A is true but R is false
d. Both A and R are true and R is the correct explanation of A
There is a small gap left between the rails of a railway track Reason (R): Cooling of substances result in contraction. Both A and R are true but R is not the correct explanation of A,
Why cooling causes contraction ?When a substance is cooled, it means that the heat is removed from the substance. This results in fewer excited molecules and, as a result, less random motion. The force of attraction increases, resulting in fewer spaces between molecules, which causes contraction.
Why there is appearance of gap between railway track?The gaps left between successive rails on a railway track as a result of the rails expanding in the summer. The gap exists to allow for this expansion. If no gap is left, the summer expansion will cause the rails to bend sideways. This will lead to train accidents.
to know more about contraction , visit ;
brainly.com/question/2669219
#SPJ1
Explain the significance of the line spectrum observed for the hydrogen atom by Neil bohr. What were the inadequacies of the bohr model? calculate the energy required to excite a hydrogen electron from level n=1 to n=3
The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.
Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.
However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.
To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:
ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]
where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:
ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV
Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.
To know more about quantization click here:
brainly.com/question/17018137
#SPJ4
When the energy released by forming solvent-solute attractions is greater than the energy absorbed by overcoming solute-solute and solvent-solvent attractions, the dissolving process a. has a negative heat of solution. b. has a positive heat of solution. c. occurs rapidly d. does not occur.
When the energy released by forming solvent-solute attractions is greater than the energy absorbed by overcoming solute-solute and solvent-solvent attractions, the dissolving process has a negative heat of solution. correct answer is option A
A negative heat of solution is created when the amount of energy required to dissolve a solute in a solvent is less than the amount of energy released when the solute and solvent combine. This generally occurs when the solute-solvent interactions are stronger than the solute-solute and solvent-solvent interactions.
The magnitude of the heat of solution is determined by the magnitude of the change in enthalpy. The enthalpy change of the solvent-solute interaction is the heat change that occurs when one mole of solute is dissolved in a given solvent. A negative enthalpy change indicates an exothermic reaction, whereas a positive enthalpy change indicates an endothermic reaction.
Know more about endothermic reaction here:
https://brainly.com/question/23184814
#SPJ11
What 48g magnesium metal reacted with oxygen gas to product 80 g of solid magnesium oxide. use the law of conservation of mass to determine the mass of oxygen used in this experiment. Explain in words how to solve this problem. magnesium 48 g + oxygen ? --> magnesium oxide 80 g
The total mass should be 80g since none of the elements were added in excess so the mass of oxygen will be 32 grams
Explanation: Two moles of magnesium reacts with one mole of oxygen gas to form two moles of magnesium oxide. Therefore 2 moles of magnesium = 48 grams. Therefore 2 moles of magnesium oxide = 80 grams. So, 48 grams of magnesium reacts with 32 grams of oxygen to form 80 grams of magnesium oxide.
If you wanted to shift the potential of the lead-zinc cell upward,toward 0.70 V, which of the following actions would give thedesired result? Check all that apply. *Ignore the currentchecks.
Anyaction that makes [Zn2+] smaller than[Pb2+].
Any action that makes [Zn2+]larger than [Pb2+].
Adding some concentratedZn(C2H3O2)2 solution tothe Zn2+/Zn couple.
Anyaction that makes Q > 1.0.
Addingsome concentratedPb(C2H3O2)2 solution tothe Pb2+/Pb couple.
Anyaction that makes log Q positive.
Any action that makes log Qnegative.
Any action that makes Q <1.0.
To shift the potential of the lead-zinc cell upward, toward 0.70 V, the following actions would give the desired result:
Add some concentrated Pb(C2H3O2)2 solution to the Pb2+/Pb couple
Adding some concentrated Zn(C2H3O2)2 solution to the Zn2+/Zn couple
Any action that makes [Zn2+] larger than [Pb2+]
A lead-zinc cell is a galvanic cell consisting of lead and zinc electrodes immersed in a suitable electrolyte. The potential of the lead-zinc cell is the difference in electrode potential between the lead and zinc electrodes, as determined by their concentration gradient.
Therefore, to shift the potential of the lead-zinc cell upward, toward 0.70 V, one should add some concentrated Pb(C2H3O2)2 solution to the Pb2+/Pb couple, add some concentrated Zn(C2H3O2)2 solution to the Zn2+/Zn couple, and any action that makes [Zn2+] larger than [Pb2+].
To learn more about "lead-zinc cell", visit: https://brainly.com/question/31316460
#SPJ11
The coupling reaction of two radicals is ______________ and involves ______ arrow(s).
endothermic, one
exothermic, one
endothermic, two
exothermic, two
The coupling reaction of two radicals is b. exothermic and involves one arrow.
A radical is a chemical entity that contains an unpaired electron in its valence shell, which makes it highly reactive. Molecules that contain an unpaired electron are referred to as "free radicals." Coupling reactions between free radicals involve the interaction of two free radicals, both of which have an unpaired electron. A covalent bond is created when these two free radicals join together, effectively eliminating the unpaired electron. This coupling reaction can be exothermic or endothermic based on the number of arrows present.
For two radicals, only one arrow is needed for the exothermic coupling reaction. The reaction is exothermic, and heat is produced as a result of the reaction. The energy produced by the bond-forming reaction overcomes the energy of the starting materials. This energy that is generated raises the kinetic energy of the product's components. As a result, the temperature of the system increases. For two radicals, the endothermic coupling reaction requires two arrows. The reaction absorbs energy, causing the temperature of the system to decrease.
Learn more about covalent bond at:
https://brainly.com/question/11674395
#SPJ11
Sort each of the following metamorphic rocks according to its proto Items (5 images) (Drag and drop into the appropriate area below) NO MUS Metaconglomerate Schist Phyllite Categories Mudstone Sandstone Conglomerate 1 OF 10 QUESTIONS COMPLETED < 04/10 > SUBMIT ANSWER MacBook Air Sort each of the following metamorphic rocks according to its protolith. Items (5 images) (Drag and drop into the appropriate area below) hist Phyllite Marble Quartzite ?
The protoliths for the displayed photos are: Quartzite - Sandstone, Schist and Phyllite - Mudstone or Shale, Marble - Limestone or Dolomite, and Metaconglomerate - Conglomerate.
Protoliths, or pre-existing rocks, undergo metamorphosis under extreme pressure, temperature, and/or chemical changes to become metamorphic rocks. The shown pictures show several kinds of metamorphic rocks with unique protoliths, textures, and mineral compositions. Sandstone may create quartzite, a hard, granular rock with a high quartz concentration. Both schist and phyllite, which are composed of mudstone or shale, have distinctive foliated textures, with schist having a coarser texture than phyllite. Marble is a crystal-like rock that is made from limestone or dolomite and has a wide range of hues and patterns. In addition, metaconglomerate, which is a layer of conglomerate with visible pebbles and cobbles, is a coarse-grained, layered rock.
learn more about metamorphosis here:
https://brainly.com/question/28206207
#SPJ4
When preparing to light a gas burner, which of the following do you do first?
Answer: clear the area of anything flammable such as hair, chemicals, Ect.
Activity 2: Who's My Family? A fire has occurred in a nearby maternity clinic. The assigned nurse quickly rushed out of the place to secure the newly born babies. Unfortunately, there were some babies without their identification bracelets. Using your knowledge about codominance inheritance will help bring these babies back to their correct parents.
Codominance is a type of inheritance pattern in which both alleles of a gene are expressed equally in the phenotype of the individual. This means that if a baby inherits two different alleles for a particular trait, both will be expressed in the baby's physical appearance.
In the case of the missing identification bracelets, the nurse could use the principle of codominance to help identify the babies and return them to their correct parents. For example, if one baby has a parent with blood type A and the other has a parent with blood type B, and both babies have blood type AB due to codominance, then the nurse could match the babies with their correct parents based on their blood type.
Similarly, if there are other observable traits that exhibit codominance, such as eye color or skin tone, the nurse could use these to help identify the babies and return them to their correct parents. By understanding and applying the principles of codominance inheritance, the nurse could help ensure that each baby is reunited with their rightful family.
To learn more about inheritance refer to:
brainly.com/question/14930526
#SPJ4
choose the pair of words or phrases that best completes the sentence below. isoelectronic species have radii that vary with even though they have the same number of . select the correct answer below: the number of electrons; protons atomic number; electrons atomic number; neutrons the number of electrons; neutrons
The pair of words or phrases that best completes the sentence "Isoelectronic species have radii that vary with ___even though they have the same number of ___." is "atomic number; electrons."
Explanation:
Isoelectronic species refers to atoms, molecules or ions having the same number of electrons but a different number of protons. They have identical electron configurations but different nuclear charges. As a result, they may have different ionic radii.
The ionization energy and electron affinity of isoelectronic species are identical, but the size of the atoms varies with the nuclear charge or atomic number. Atomic radius depends on the number of electrons and the nuclear charge. This is because the nuclear charge exerts an attractive force on the electrons in the outer shell that holds them in place.
The greater the nuclear charge, the smaller the atom.The pair of words or phrases that best completes the sentence is "atomic number; electrons." The number of electrons in the outermost shell of an atom determines its size. As we progress from left to right on a period, the number of electrons in the outer shell stays the same, but the nuclear charge increases.
This results in a decrease in size from left to right .Arranging isoelectronic species in a table shows that the radius of an ion is inversely proportional to the nuclear charge or atomic number.
To know more about Isoelectronic species refer here: https://brainly.com/question/30874804#
#SPJ11
jamal has a sample of a substance and was asked to determine the density of this substance. he measured the mass to be 20g and volume to be 5cm3. what is the density of the sample?
The density of the sample of a substance with a mass of 20 g and volume of 5 cm³ will be 4 g/cm³.
What is Density of substance?Density of a substance can be defined as the measure of the amount of mass which is contained in a unit of volume of that substance. The general trend is that most of the gases are less dense than that of liquids, which are in turn less dense than that of solids, but there are numerous exceptions also present in nature.
The density of a substance can be calculated with the help of the formula:
Density = mass/volume.
Given, Mass of substance = 20g
Volume of substance = 5cm³
Density of the sample = mass of substance/volume of substance = 20g/5cm³ = 4 g/cm³
Therefore, the density of the sample is 4 g/cm³.
Learn more about Density here:
https://brainly.com/question/29775886
#SPJ11