Answer: Centimeters
Explanation: no explanation needed
Consult your laboratory notebook and notes about the color changes you observed during the titration to select the choice that most correctly describes the pH range and color change observed with the phenolphthalein indicator. a. When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9 and was deep purple at the first equivalence point. b. When the indicator was added to the solution, it started out a deep purple, turned to pink at about pH 9 which faded to become colorless at the first equivalence point. c. When the indicator was added to the solution, started out blue, became green during the titration at about pH 5 and turned to yellow at the second equivalence point and beyond. d. When the indicator was added to the solution, it started out yellow, passed through green at about pH 5 and became blue at the second equivalence point and beyond.
Consulting the laboratory notebook and notes about the color changes observed during titration, it is seen that the most accurate option for phenolphthalein is option (a).
When phenolphthalein was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point.
Phenolphthalein is a pH-sensitive indicator that changes color in the pH range of 8.3 to 10.0. The colorless form of phenolphthalein is present in acidic solutions, whereas the pink form of phenolphthalein is present in basic solutions. The deep purple coloration is representative of the first equivalence point.
The pH of a solution can be determined using an acid-base indicator. Indicators are chemicals that change color in response to changes in acidity. Indicators are typically used to determine the endpoint of an acid-base titration when the pH changes rapidly over a small range of volumes. The color of the indicator corresponds to a specific pH value.
A colorless solution with a low pH will gradually become pink as it approaches the endpoint. As a result, the pH range observed with the phenolphthalein indicator is from about pH 8.3 to 10.0, with a color change from colorless to pink occurring around pH 9.0.
Therefore, "When the indicator was added to the solution, it started out colorless, turned to pink at about pH 9, and was deep purple at the first equivalence point" is the correct answer.
To know more about phenolphthalein, refer here:
https://brainly.com/question/15211751#
#SPJ11
PLEASE HELP ASAP 100 POINTS
Score
The Russian Mir space station used a chemical oxygen generator system to make oxygen for the crew. The
system ignited a tube of solid lithium perchlorate (LICIO4) to make oxygen and lithium chloride (LICI):
LICIO4 (s) → 202 (g) + LiCl (s)
If you have 500 g of LICIO4, then how many liters of oxygen will the system make at the station's standard
operating conditions, a pressure of 101.5 kPa and a temperature of 21°C? (Show the steps involved in your work)
To solve this problem, we need to use the ideal gas law, which relates the pressure, volume, and temperature of a gas to the number of moles of gas present. We can use the balanced chemical equation to determine the number of moles of oxygen produced by the reaction of LICIO4.
The molar mass of LICIO4 is:
LICIO4: Li = 1 x 1 = 1 g/mol, I = 127 g/mol, O4 = 4 x 16 = 64 g/mol
Total molar mass = 1 + 127 + 64 = 192 g/mol
So, 500 g of LICIO4 is equal to:
500 g / 192 g/mol = 2.604 moles of LICIO4
From the balanced chemical equation, we see that for every mole of LICIO4, two moles of oxygen are produced:
1 mol LICIO4 → 2 mol O2
Therefore, 2.604 moles of LICIO4 will produce:
2.604 moles x 2 mol O2/1 mol LICIO4 = 5.208 moles of O2
Now we can use the ideal gas law to calculate the volume of oxygen produced at the given temperature and pressure:
PV = nRT
where P is the pressure (101.5 kPa), V is the volume we want to find, n is the number of moles of oxygen (5.208 moles), R is the ideal gas constant (8.314 J/mol K), and T is the temperature in Kelvin (21°C + 273 = 294 K).
V = (nRT)/P
V = (5.208 mol x 8.314 J/mol K x 294 K)/101.5 kPa
Converting kPa to Pa, we get:
V = (5.208 mol x 8.314 J/mol K x 294 K)/(101.5 x 1000 Pa)
V = 101.92 m3 or 101,920 L
Therefore, the system would produce approximately 101,920 liters of oxygen at the station's standard operating conditions.
Define rancidity. Which type of fatty acids is most susceptible to rancidity? What environment factors trigger rancidity?
Food fats and oils decay through a process known as rancidity, which affects the taste, texture, and flavour of the meal as well as the odour and smell. Unsaturated fatty acid oxidation is what triggers this process.
Rancidity is known to be influenced by time, temperature, light, air, exposed surface, moisture, nitrogenous organic material, and traces of metals.
Unsaturated fatty acids that contain double bonds in their molecules are peroxidation-prone. Lipids can undergo this peroxidation, often known as "oxidative degradation," in one of two ways. Autoxidation is one method, and it's by far the most significant one. A less significant alternative is an enzymatic oxidation. A fatty acid molecule undergoes oxidation when an oxygen ion replaces a hydrogen ion, and the likelihood of autoxidation rises as the number of double bonds increases inside the fatty acid.
Learn more about Rancidity here:
https://brainly.com/question/9861217
#SPJ4
he structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbusterFDA-approved drug. Propose a synthesis of this compound using tryptophan as a startingmaterial.NHNN
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt.
The structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbuster FDA-approved drug. To propose a synthesis of this compound using tryptophan as a starting material, we need to understand the chemical structure of the compound.
The structure of the compound contains two nitrogen atoms, one hydrogen atom, and two nitrogen-hydrogen bonds (NHNN). The starting material, tryptophan, contains a ring structure with an indole group, two nitrogen atoms, and four carbon atoms.
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt. This salt can then be reacted with a Lewis acid to form a substituted Indolium ion. The Indolium ion can be reacted with a nucleophile such as hydrazine to form an oxazolidinone intermediate.
Finally, a ring closure of the oxazolidinone intermediate can yield the desired compound.
Learn more about tryptophan https://brainly.com/question/15204421
#SPJ11
the diagram represents the reaction of hydrogen gas and oxygen gas to produce water. which statement best describes the reaction? (1 point) responses more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is needed to break the bonds of the reactants than is released in the formation of the products, so the reaction is endothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. more energy is released in the formation of the products than is needed to break the bonds of the reactants, so the reaction is exothermic. skip to navigation
The reaction of hydrogen gas and oxygen gas to produce water is an exothermic reaction because more energy is released in the formation of the products than is needed to break the bonds of the reactants.
In other words, more energy is released when the hydrogen and oxygen molecules combine to form water molecules than is needed to break the bonds between the hydrogen and oxygen molecules.
Exothermic reaction- It is a type of reaction in which the two atoms react with each other to form a stable compound and release energy in the process of doing so.
To learn more about "reaction", visit: https://brainly.com/question/11231920
#SPJ11
which one of the following molecules has the highest boiling point? you will explain why in the next question. responses 3-methoxy-1-propanol 3-methoxy-1-propanol 1,2-dimethoxyethane 1,2-dimethoxyethane 1,4-butanediol 1,4-butanediol 1,1-dimethoxyethane 1,1-dimethoxyethane 2-methoxy-1-propanol
The molecule with the highest boiling point is 1,4-butanediol. This is because of the presence of intermolecular hydrogen bonding. Thus, the correct option is C.
What is intermolecular hydrogen bonding?A hydrogen bond is an intermolecular force that exists between a hydrogen atom bonded to a highly electronegative atom (like N, O, or F) and another highly electronegative atom in another molecule. Hydrogen bonding is a type of dipole-dipole interaction that occurs between molecules that have a permanent dipole.
The four molecules, 3-methoxy-1-propanol, 1,2-dimethoxyethane, 1,4-butanediol, and 2-methoxy-1-propanol, all have oxygen atoms that are capable of forming hydrogen bonds. In order to form a hydrogen bond, a hydrogen atom in one molecule must be bonded to an electronegative atom like oxygen or nitrogen, and another electronegative atom in a neighboring molecule must be present.
In this case, 1,4-butanediol has two -OH groups on the ends of the carbon chain that are capable of forming hydrogen bonds with neighboring molecules, resulting in a higher boiling point. Because of the presence of intermolecular hydrogen bonding, the molecules have stronger intermolecular forces that require more energy to break, resulting in a higher boiling point.
Therefore, the correct option is C.
Learn more about Boiling point here:
https://brainly.com/question/2153588
#SPJ11
Which hydrocarbon has all of its atoms in the same plane?A) C2H6B) CH4C) C2H4D) C3H4
The hydrocarbon that has all of its atoms in the same plane is C2H4. The correct answer is option: C .
This is because C2H4 has a planar structure due to its sp2 hybridization of carbon atoms, which allows the molecule to have a trigonal planar geometry. In contrast, C2H6, also known as ethane, has a tetrahedral shape due to the sp3 hybridization of its carbon atoms, which results in the atoms not being in the same plane. CH4, it has a similar tetrahedral shape for the same reason. C3H4, also known as propyne, has a linear shape due to the triple bond between the carbon atoms, but the atoms are not all in the same plane. Option C is correct.
To know more about hydrocarbon, here
brainly.com/question/17578846
#SPJ4
Which equation represents energy being absorbed as a
bond is broken?
A) H+H + H2 + energy
B) H+H+ energy H2
C) H2 + H+H+ energy
D) H2 + energy + H+H
The reaction demonstrates that energy is needed to dissociate the hydrogen atoms from one another, and as a result energy is consumed.
When a chemical bond is broken, energy is required to break the bond, and thus energy is absorbed. The equation that represents energy being absorbed as a bond is broken is option D, which is:
H2 + energy → 2H
In this equation, the energy is shown as a reactant on the left-hand side of the arrow, indicating that it is required for the reaction to proceed. The H2 molecule on the left-hand side represents a molecule with a covalent bond between two hydrogen atoms. When energy is added to the molecule, the bond between the two hydrogen atoms is broken, and the atoms become separated. This results in the formation of two hydrogen atoms on the right-hand side of the arrow, each with one unpaired electron.
Overall, the reaction shows that energy is required to break the bond between the hydrogen atoms, and thus energy is absorbed during the process.
To learn more about energy refer to:
brainly.com/question/626780
#SPJ4
According to the following reaction, how many moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine?hydrogen (g) + iodine (s) → hydrogen iodide (g)
0.566 moles of hydrogen iodide will be formed upon the complete reaction of 0.283 moles of hydrogen gas with excess iodine.
To determine how many moles of hydrogen iodide will be formed, we need to use stoichiometry.
The balanced chemical equation for the given reaction is:-
H₂ (g) + I₂ (s) → 2HI (g)
From the balanced chemical equation, we know that 1 mole of hydrogen reacts with 1 mole of iodine to produce 2 moles of hydrogen iodide.
Since the number of moles of hydrogen is given as 0.283 moles, therefore, the number of moles of iodine required is also 0.283 moles.
Therefore, the number of moles of hydrogen iodide formed = 2 x 0.283 mol= 0.566 mol.
Learn more about moles:
https://brainly.com/question/15356425
#SPJ11
what is the function of the electron transport chain in cellular respiration ?
The electron transport chain (ETC) is an essential part of cellular respiration, which is a series of molecules that transfer electrons from one molecule to another used by cells to convert nutrients into energy.
This starts with the oxidation of molecules such as glucose, which releases electrons that are then transferred to a series of electron carriers in the ETC. The electron carriers are molecules that hold the electrons and can transfer them to other molecules which is known as redox reactions. As the electrons move through the ETC, they release energy which is used to form a proton gradient that is then used to drive the synthesis of ATP, the energy currency of the cell. The ETC is an essential part of cellular respiration as it is the process responsible for generating the energy necessary for cells to function.
To learn more about electron click here https://brainly.com/question/28977387
#SPJ4
A: Branched Group Type and Location:
(Hint: There are two, but they are the same type)
b. Longest Chain:
c. Functional Group:
d. Full Name of Compound:
The longest chain is pentane
The functional group is alkene
The name of the compound would be based on the kinds of substituents present.
What are the types of branching in organic compounds?In organic chemistry, there are two main types of branching in organic compounds: chain branching and positional branching.
Chain branching: Chain branching occurs when a side chain (alkyl group) is attached to the main carbon chain of a molecule. This results in a change in the chemical and physical properties of the molecule, such as boiling point, melting point, and solubility. Examples of chain-branched compounds include isobutane (2-methylpropane), isopentane (2-methylbutane), and neopentane (2,2-dimethylpropane).
Positional branching: Positional branching occurs when a substituent is attached to a specific position on the main carbon chain of a molecule. This type of branching can occur in cyclic or acyclic molecules, and can have a significant impact on the properties and reactivity of the molecule. Examples of positional-branched compounds include tert-butyl alcohol (2-methyl-2-propanol), 1-chloro-3-methylbutane, and 2,4-dimethylhexane.
Learn more about organic compounds:https://brainly.com/question/5994723
#SPJ1
What are the 5 chemical bonds?
There are five chemical bonds that you can learn about in chemistry. These chemical bonds include: Covalent bond, Ionic bond, Polar covalent bond, Metallic bond, and Hydrogen bond.
Covalent bond: It is the bond formed by sharing electrons between two atoms. It is one of the most powerful chemical bonds that holds molecules together. This bond can be formed between atoms of the same or different elements.
Ionic bond: It is the bond formed by the transfer of electrons from one atom to another. This bond is formed between metals and non-metals.
Polar covalent bond: It is the bond formed between two atoms that have different electronegativity values. The electrons in this bond are shared unequally between the two atoms. This bond is intermediate between the covalent and ionic bond.
Metallic bond: It is the bond formed between metal atoms. In this bond, electrons move freely between metal atoms.
Hydrogen bond: It is the bond formed between a hydrogen atom and an electronegative atom. This bond is responsible for many of the unique properties of water.
Learn more about Chemical bonds here:
https://brainly.com/question/12907148
#SPJ11
Use the Ideal Gas Law equation to find the molar mass of a 98. 2 g sample of gas that fills a 50. 0-liter container at STP.
Multiple choice question.
A)
32. 0 g/mol
B)
44. 0 g/mol
C)
4. 00 g/mol
D)
1. 48 g/mol
Using the Ideal Gas Law equation, the molar mass of a 98. 2 g sample of gas that fills a 50. 0-liter container at STP is 48 g/mol
The correct answer is option D.
The Ideal Gas Law is PV=nRT, where P is pressure, V is volume, n is the number of moles of the gas, R is the ideal gas constant and T is temperature.
According to the Ideal Gas Law equation to find the molar mass of a 98.2 g sample of gas that fills a 50.0-liter container at STP is given by:
It is not clear which gas is present in the container, but since the temperature and pressure are fixed (standard pressure and temperature), we can assume that this gas is an ideal gas.
We can use the ideal gas law to calculate the number of moles of this gas:
PV=nRT
⟹n=PV/RT
=1.00 atm×50.0 L/0.0821 L·atm/mol·K×273 K
=1.96 mol
Since we know the mass of this gas, we can now calculate its molar mass:
M=mass/number of moles
=98.2 g/1.96 mol=48 g/mol
So the molar mass of the given gas is 48 g/mol.
For more such questions on Ideal Gas Law, click on:
https://brainly.com/question/4147359
#SPJ11
10 ml of ethanol is mixed with 250 ml of water calculate the volume percentage of ethanol
Do you think the offspring of the hydra and the salamander are genetically identical or not genetically identical to the parents? Support your argument with evidence.
in the planet x of the z constellation, the martian found two isotopes of an element that he named m, 79m and 81m, whose masses (78.9183 and 80.9163 amu) and abundances (50.69% and 49.31%) were determined in earlier experiments. calculate the average atomic mass of m.
The average atomic mass of m is 79.90 amu.
The average atomic mass of m is given by the formula below:
The average atomic mass of m= [(Abundance of 79m * Mass of 79m) + (Abundance of 81m * Mass of 81m)]/100
Average atomic mass of m = [(50.69% * 78.9183 amu) + (49.31% * 80.9163 amu)]/100
The average atomic mass of m = [(0.5069 * 78.9183) + (0.4931 * 80.9163)]/100
The average atomic mass of m = 79.90 amu
Therefore, the average atomic mass of m is found to be 79.90 amu.
To learn more about isotopes refer - https://brainly.com/question/24873591
#SPJ11
Does the constancy in colour intensity indicate the dynamic nature of equilibrium? Explain your answer with appropriate reasons.
Therefore, the constancy in color intensity can be an indicator of a dynamic equilibrium, where the rates of the forward and reverse reactions are equal and the concentrations of reactants and products remain constant over time.
What is equilibrium?Chemical equilibrium occurs when a reversible reaction takes place, where the reactants can form products and the products can also react to form reactants. At the beginning of the reaction, the reactants are transformed into products, and as the reaction progresses, the concentration of the reactants decreases while the concentration of the products increases. Eventually, a point is reached where the rate of the forward reaction is equal to the rate of the reverse reaction, and the concentrations of the reactants and products remain constant. This state is called chemical equilibrium.
Here,
The constancy in color intensity can indicate the dynamic nature of equilibrium in certain cases. In a chemical equilibrium, the forward and reverse reactions are occurring simultaneously, but at equal rates, resulting in a constant concentration of reactants and products. Many chemical reactions involve colored species, and changes in the intensity of the color can indicate a change in the concentration of the species involved. For example, consider the reaction between iodine and starch:
I2 + starch ⇌ I2-starch complex
In this reaction, the iodine-starch complex is a blue-purple color, while the reactants (iodine and starch) are colorless. As the reaction proceeds, the concentration of the complex increases, leading to an increase in color intensity. However, if the reaction reaches equilibrium, the forward and reverse reactions will be occurring at equal rates, and the concentration of the complex will remain constant. This will result in a constant color intensity, indicating the dynamic nature of the equilibrium.
To know more about equilibrium,
https://brainly.com/question/29627805
#SPJ1
what are the equations that relate the partial derivatives of pressure, volume, temperature, and entropy of a simple compressible system called? multiple choice question. gibbs relations helmholtz function maxwell relations clapeyron equation
The equations that relate the partial derivatives of pressure, volume, temperature, and entropy of a simple compressible system are called Maxwell relations.
What are the Maxwell relations?Maxwell's relations or thermodynamic equations of state are the set of equations in thermodynamics that relate partial derivatives of properties of a thermodynamic system to each other. The Maxwell relations arise from the fundamental relations between thermodynamic potentials.The Maxwell relations relate the partial derivatives of thermodynamic properties such as pressure, volume, temperature, and entropy. They are a consequence of the symmetry of the second derivative of the thermodynamic potential.
The four thermodynamic potentials are internal energy, enthalpy, Helmholtz free energy, and Gibbs free energy. The relations are named after James Clerk Maxwell, who presented them as part of his 1871 textbook "Theory of Heat."The Maxwell relations are named after James Clerk Maxwell, a Scottish physicist who first published them in 1871 in his book Theory of Heat. They are applied in thermodynamics to help connect and calculate various thermodynamic properties of a system.
Learn more about Maxwell's relations here: https://brainly.com/question/13944221.
#SPJ11
based on this information, which of the following is correct? a. succinate dehydrogenase is the enzyme, and fumarate is the substrate fumarate is the product, and malonic acid is a noncompetitive inhibitor. b. malonic acid is the product, and fumarate is a competitive inhibitor. c. succinate is the substrate, and fumarate is the product. d. succinate dehydrogenase is the enzyme, and malonic acid is the substrate.
The correct option based on the information given is:a. succinate dehydrogenase is the enzyme, and fumarate is the substrate.
Explanation:Succinate dehydrogenase is the enzyme involved in the conversion of succinate to fumarate.
This enzyme complex is also known as Complex II of the electron transport chain. The reaction catalyzed by succinate dehydrogenase is an oxidation-reduction reaction.
In this reaction, succinate is oxidized to fumarate, and FAD is reduced to FADH2.
This reaction is an important step in the process of cellular respiration, as it generates a molecule of FADH2 that can be used to produce ATP through oxidative phosphorylation.
These inhibitors bind to the active site of the enzyme and block the binding of succinate
.This inhibition is reversible, as the inhibitor can be displaced by high concentrations of substrate
For more information about succinate dehydrogenase refer here :
https://brainly.com/question/13943912?
#SPJ11
Why is a physical property not a characteristic of matter that you can’t observe or measure without changing the identity of matter
Answer:
Characteristics of matter change due to chemical changes, not physical ones. Physical properties can be determined without changing the substance's chemical identity
Explanation:
how would the value of the atomic mass of the metal calculated be affected if the hot metal sample cooled off before it was transferred to the water in the calorimeter? would it be too high or too low?
The value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
How is atomic mass calculated?The atomic mass of an element is defined as the mass of an atom of an element in atomic mass units (amu). One atomic mass unit is defined as 1/12th of the mass of an atom of carbon-12.
The atomic mass of an element can be calculated using the following formula:
Atomic mass = (mass of isotope 1 × % abundance of isotope 1) + (mass of isotope 2 × % abundance of isotope 2) + (mass of isotope 3 × % abundance of isotope 3) + ...
If the hot metal sample cooled off before it was transferred to the water in the calorimeter, the temperature of the sample would have decreased. The decrease in temperature would result in a decrease in the thermal energy of the sample. Consequently, the amount of heat absorbed by the water in the calorimeter would decrease, leading to a lower value of the heat capacity of the metal.
Since the heat capacity is directly proportional to the mass of the sample, a lower value of the heat capacity would lead to a higher value of the atomic mass of the metal calculated. Therefore, the value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
Learn more about atomic mass here: https://brainly.com/question/3187640.
#SPJ11
PLEASE HURRY!!!!!!! Which statements correctly describe the movement of water into and out of the ground?
Choose two correct answers.
Gravity helps move water into the ground.
Mountains help move water out of the ground.
Rocks on Earth’s surface help move water into the ground.
The Sun helps move water into the ground.
The roots of trees help move water out of the ground.
Answer:
Gravity helps move water into the ground.
How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.
Answer: Both processes produce waste.
Which of the following are thought to be key requirements for a world to have life?- a source of energy to fuel metabolism- a source of molecules from which to build living cells- a liquid medium
The following are thought to be key requirements for a world to have life: A source of energy to fuel metabolism, A source of molecules from which to build living cells, A liquid medium, These are the primary requirements for a world to have life. These requirements are key to the development and sustainability of life on Earth.
Every living organism requires energy to survive, and this energy comes from a variety of sources, including sunlight, food, or chemical reactions. It's necessary to have a source of energy to fuel metabolism, as it helps with the growth, development, and reproduction of an organism. A source of molecules from which to build living cells
These molecules can include things like amino acids, sugars, and lipids. A liquid medium is essential for life because it provides an environment in which chemical reactions can occur. Most chemical reactions require water to proceed, and water is also the medium in which cells operate. This is why water is considered to be the universal solvent and is an essential component for life on Earth.
Know more about reproduction here:
https://brainly.com/question/11856893
#SPJ11
How many moles of fe3o4 can be produced when 12. 00 mol fe react with 6. 00 mol o2?
When the 12. 00 mol Iron react with 6.00 mol O2 then 4.00 mol of Fe3O4 can be produced.
In order to know how many moles of Fe3O4 can be produced from the reaction of 12.00 mol Fe with 6.00 mol O2, we first need to get balance the chemical equation for the reaction:
4 Fe + 3 O2 -----> 2 Fe3O4
From the balanced equation, we can see that for every 4 moles of Fe that react, we need 3 moles of O2. Therefore, the limiting reactant in this case is O2, since we only have 6.00 mol available, while we need 8.00 mol to react with all 12.00 mol of Fe. This means that Fe will be in excess and we can calculate the amount of Fe3O4 produced based on the amount of O2 that reacts.
To do this, we can use the mole ratio from the balanced equation:
3 mol O2 --------> 2 mol Fe3O4
So, for every 3 moles of oxygen that react, we can produce 2 moles of Fe3O4. Since we have 6.00 mol of O2, we can obtain the moles of Fe3O4 produced as follows:
6.00 mol O2 x (2 mol Fe3O4 / 3 mol O2) = 4.00 mol Fe3O4
Therefore, it can be concluded that 4.00 mol of Fe3O4 can be produced when 12.00 mol Iron reacts with 6.00 mol O2.
Learn more Molarity :
https://brainly.com/question/15948514
#SPJ4
At a pressure of 1. 00 atm and a temperature of 20°C, 1. 72 g CO2 win dissolve in 1L of water. How much CO2 will dis solve if the pressure is raised to 1. 35 atm and the temperature stays the same?
2.32 g of CO2 will dissolve if the pressure is raised to 1. 35 atm and the temperature will remain the same.
The given data is:
Pressure = 1 atm
Temperature = 20 degrees = 293 K
CO2 weight = 1.72g
Water weight = 1L
Henry's law is used which defines that the amount of gas dissolved in a fluid is proportional to the partial pressure of the gas beyond the liquid.
Mathematically,
C = kH * P
C is the concentration of the gas given.
1.72 g CO2 / 44.01 g/mol = 0.039 mol CO2
C = 0.039 mol/L
kH = C/P
kH = 0.039 mol/L / 1 atm = 0.039 mol/(L*atm)
CO2 when the pressure is raised to 1.35 atm:
P' = 1.35 atm
C' = kH * P'
C' = (0.039 mol/(L*atm)) * 1.35 atm
C' = 0.0527 mol/L
The amount of CO2 dissolved in the water is
m = C' * M * V
m = 0.0527 mol/L * 44.01 g/mol * 1 L
m = 2.32 g
Therefore, a pressure of 1.35 atm is required and at a temperature of 20°C, makes 2.32g of CO2 will dissolve.
To learn more about temperature problems
https://brainly.com/question/22736363
#SPJ4
1. PART A: Which TWO of the following best identify the main ideas of this article?
Fingerprints are still the most accurate way to identify a person.
Blood vessels have the same structure as fingerprints.
Biometric features are slightly different in everyone.
Biometrics is the measurement of life.
A
B.
C.
D.
E.
F.
Biometric technology can help in areas of security, privacy, and health.
Children in West Africa desperately need vaccines.
The statement that best identify the main idea of the article are, A and C
A) Fingerprints are still the most accurate way to identify a person.
C) Biometric features are slightly different in everyone.
What is the article about?The article seems to focus on biometric technology and the different ways it can be used for identification, security, and health purposes.
It explains that fingerprints remain the most accurate way to identify a person, but also discusses the unique features of other biometric identifiers such as facial recognition and blood vessels.
Lastly, the article emphasizes the importance of recognizing that biometric features are unique to each individual.
Learn more about biometric technology from
https://brainly.com/question/20643575
#SPJ1
The density of a substance is 1.63g/mL. What is the mass of 0.25L of the substance in grams? A. 4.075g B. 40.75g C. 407.5g D. 4075g
Answer:
Explanation: Use the formula density = mass divided by volume
so to get the answer multiply the density by the volume
Answer: 1.63 x (0.25x1000)
we multiply 0.25 by 1000 because we need to use volume in ml instead of L.
Emma prepared two glasses of water at two different temperatures. She added a spoonful of table salt to the cold water in glass #1 and spoonful of rock salt to the hot water in glass #2. She observed that the spoonful of table salt in glass #1 dissolved faster than the spoonful of rock salt in glass #2. Based on this observation, Emma concluded that salt dissolves faster in cold water than in hot water.
What question was Emma trying to investigate in her experiment?
Are table salt and rock salt soluble or insoluble in cold and hot water without stirring?
Does surface area affect the rate of dissolving of a substance in water?
Does temperature affect the rate of dissolving of a substance in water?
What type of salt dissolves faster in water when stirred at different temperatures?
Answer: Does temperature affect the rate of dissolving a substance in water?
Complete the statements about the different types of lipids. ______ are the building blocks for many lipids and generally contain an even number of carbon atoms and an unbranched hydrocarbon chain.______ are lipid compounds that contain a fused ring system. These compounds contain three six-membered rings and one five-membered ring, and some of these compounds are found in biological membranes. ______ are formed when a carbohydrate is glycosidically linked to a hydroxyl group of a lipid. These compounds are also found in biological membranes and include gangliosides and cerebrosides. ______ are the storage form of lipids that accumulate in adipose tissue and can be used as metabolic fuel. These compounds have a polar head, made of three ester groups, and a nonpolar fatty acid tail. ______ are made up of a long-chain amino alcohol joined to a fatty acid by either a glycosidic or phosphodiester linkage. These compounds, which are commonly found in the nervous system, do not contain glycerol. ______ are formed when glycerol is esterified to two fatty acids and a phosphoric acid molecule. These compounds are also found in biological membranes.
Answer:
Fatty acids
Steroids
Glycolipids
Triacylglycerols
Sphingolipids
Phospholipids