In a bicycle dynamo,does 1. The permanent magnet surrounds a conducting coil 2. The conducting coil rotates when the rear wheel of the bicycle rotates. 3.The electricity is generated in the permanent magnet 4.When the rear wheel of the bicycle turns fast, the brightness of the light increases

Answer:

the correct answer  is 75 N

Explanation:

This is a translational balancing exercise, let's set a reference system with the x-axis in the direction of the plane and the y-axis perpendicular to the plane.

In this reference system the force to decompose is the weight

         sin 42 = Wₓ / W

        cos 42 = W_y / W

        Wₓ = W sin 42

        W_y = W cos 42

        Wₓ = 112.1 sin 42 = 75.0 N

        W_y = 112.1 cos 42 = 83.3 N

The expression for equilibrium on the x-axis is

         Wₓ - fr = 0

         fr = Wₓ

         fr = 75.0 N

the correct answer  is 75 N

Answer:

The primary nutrients are nitrogen, phosphorus and potassium.

The intermediate nutrients are sulfur, magnesium, and calcium.

The remaining essential elements are the micronutrients and are required in very small quantities.

Answer:

The primary nutrients are nitrogen, phosphorus and potassium.

The intermediate nutrients are sulfur, magnesium, and calcium.

The remaining essential elements are the micronutrients and are required in very small quantities.

Explanation:

third down, chris is correct

Answer:

a) The specific heat capacity means the amount of heat needed by a unit mass of a material to increase its temperature in one unit.

b) Liquid P - [tex]Q = 3840\,J[/tex], Liquid Q - [tex]Q = 5500\,J[/tex], Liquid R - [tex]Q = 7800\,J[/tex], Liquid S - [tex]Q = 2856\,J[/tex]

Explanation:

a) The specific heat capacity means the amount of heat needed by a unit mass of a material to increase its temperature in one unit.

b) Let suppose that heat transfer rates between liquids and surroundings are stable. The quantity of the heat released is determined by the following expression:

[tex]Q = m\cdot c\cdot (T_{r} - T_{f})[/tex] (1)

Where:

[tex]m[/tex] - Mass of the liquid, in kilograms.

[tex]c[/tex] - Specific heat capacity, in joules per kilogram-degree Celsius.

[tex]T_{r}[/tex] - Initial temperature of the sample, in degrees Celsius.

[tex]T_{f}[/tex] - Freezing point, in degrees Celsius.

Liquid P ([tex]m = 1\,kg[/tex], [tex]c = 160\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 6\,^{\circ}C[/tex])

[tex]Q = (1\,kg)\cdot \left(160\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 6\,^{\circ}C)[/tex]

[tex]Q = 3840\,J[/tex]

Liquid Q ([tex]m = 1\,kg[/tex], [tex]c = 220\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 5\,^{\circ}C[/tex])

[tex]Q = (1\,kg)\cdot \left(220\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 5\,^{\circ}C)[/tex]

[tex]Q = 5500\,J[/tex]

Liquid R ([tex]m = 1\,kg[/tex], [tex]c = 300\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 4\,^{\circ}C[/tex])

[tex]Q = (1\,kg)\cdot \left(300\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 4\,^{\circ}C)[/tex]

[tex]Q = 7800\,J[/tex]

Liquid S ([tex]m = 1\,kg[/tex], [tex]c = 102\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 2\,^{\circ}C[/tex])

[tex]Q = (1\,kg)\cdot \left(102\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 2\,^{\circ}C)[/tex]

[tex]Q = 2856\,J[/tex]

Answer:

Explanation:

When a light bulb connects to an electrical power supply, an electrical current flows from one metal contact to the other. As the current travels through the wires and the filament, the filament heats up to the point where it begins to emit photons, which are small packets of visible light.

Answer:

t_total = 6.99 s

Explanation:

It asks us how long it takes to hear the sound, for this we must look for the time (t₁) it takes for the sound to reach the microphone, the time it takes for the video signal (t₂) to reach the television and the time (₃) it takes for the TV sound to reach us, so the total delay time is

         t_total = t₁ + t₂ + t₂

we look for t1, it indicates that the distance x = 22m

          v = x / t

           t = x / v

           t₁ = 22/343

           t₁ = 6.41 10-2 s

time t₂

          t₂ = 4500 103/3 108

          t₂ = 1.5 10-5 s

time t₃

          t₃ = 2/343

          t₃ = 5.83 10⁻³

Total time is

         t_total = t₁ + t₂ + t₃

         t_total = 6.41 10⁻² + ​​1.5 10⁻⁵ + 0.583 10⁻²

         t_total = 6.99 s

Answer:

Acceleration = 4 m/s²

Explanation:

Given the following data;

Force = 8 N

Mass = 2 kg

To find the acceleration of the block;

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

[tex] Acceleration = \frac {Net \; force}{mass} [/tex]

Substituting into the formula, we have;

[tex] Acceleration = \frac {8}{2} [/tex]

Acceleration = 4 m/s²

Answer:

D.STATIC FRICTION

Explanation:

Have a nice day

Answer:

ans: 13.53 × 10^17 Newton

Answer:

1. 25 J

2. 250 J

3. 900,000 J

4. 7,500 J

Explanation:

1. The distance the wheelbarrow is tilted, d = 0.5 m

The force used to tilt the wheelbarrow, F = 50 N

The work done, W = F × d

∴ W = 50 N × 0.5 m = 25 J

2. Work done, W = Force × Distance

The applied force, F = 50 N

The distance the sand is moved, d = 5 m

∴ W = 50 N × 5 m = 250 J

3. The work done, W = The load lifted × The height to which the load is lifted

∴ W = 90,000 N × 10 m = 900,000 J

The work done, W = 900,000 J

4. The work output of the skateboard = The work input × Efficiency

Given that the skateboard is an ideal machine, we have;

The work output of the skateboard = The work input = W

W = F × d

F = 15 N, d = 500 m

∴ W = 15 N × 500 m = 7,500 J

The work output of the skateboard = W = 7,500 J.

Answer:

They show the elements that make up a compound.

They show the three-dimensional shape of a molecule.

They show the types of atoms that make up a molecule.

They show the number of each type of atom in a molecule.

Explanation:

#keep learning!!

Answer:

d. elastic potential energy

Answer:

Circuits A and B are both series circuit.

Explanation:

In series combination, two resistors are connected with their ends to ends. The equivalent resistance in this case is given by :

[tex]R_s=R_1+R_2+...[/tex]

In circuit A both voltage (V) and R₁ are connected in series.

Similarly in circuit B, voltage (V), R₁ and R₂ are in series./

Hence, the correct option is (a).

Answer:

v = 4 m/s

Explanation:

Given :

Ball X :

Mass, m1 = 8kg ;

Initial Velocity, u1 = 2 m/s

Final velocity, v1 = 0

Ball Y:

Mass, m2 = 4kg ;

Initial Velocity, u2 = 0 m/s

Final velocity, v2 = v

(m1u1 + m2u2) = (m2v2 + m1v1)

(8*2 + 4*0) = (4*v + 4*0)

16 + 0 = 4v + 0

16 = 4v

v = 16 / 4

v = 4 m/s

Answer:

Explanation:

This is the Law of Momentum Conservation which for us looks like this:

[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:

[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and

16 + 0 = 0 + 4.0v and

16 = 4.0v so

v = 4.0 in the direction of ball X

Explanation:

[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]

By the conduction process the heat reaches the pin.Option C is correct.

The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.

Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1​.

By the conduction process the heat reaches the pin.

Hence option C is correct.

To learn more about the heat transfer refer to the link;

https://brainly.com/question/13433948

#SPJ2

Answer:

C

Explanation:

Prevents further damage to the network cable.

Answer:

density = mass/volume

density=0.8

volume=36

mass=?

0.8=mass/36

mass = 36x0.8=28.8g

Answer:

Potential energy is energy that is stored in an object or system. It remains unaffected by the environment outside of the object or system. Kinetic energy is the energy of an object or a system's particles in motion.

Explanation:

Answer:

The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics

Explanation:

Radhe Radhe❤

Answer:

104 times by 3.3

Explanation:

104 is the distance for 1 hour. So you need to multiply it by 3.3( because it's 3 hour and 30 minutes)

Answer: Se presentan en equilibrio a nivel atómico y/o molecular

Explanation: Sólo los iones presentan campo eléctrico pero no son estables en la naturaleza ya que tienden a encontrar al ion de carga opuesta con el cual equilibrar la carga. El estado de equilibrio de un cuerpo o materia se da al tener idéntica cantidad de electrones (-) que de protones (+)-

Measurement tools improve the quality and quantity of our lives by making them easier and safer. The ability to precisely quantify physical qualities has arguably enormous survival value, providing humans with an adaptive, evolutionary advantage refined over thousands of years of natural selection.

#CarryOnLearning

Answer:

a = 16 m/s²

General Formulas and Concepts:

Dynamics

Newton's Law of Motions

Explanation:

Step 1: Define

Identify variables

[Given] F = 22000 N

[Given] m = 1375 kg

[Solve] a

Step 2: Find Acceleration

Answer:

0.775 g/cm³

Explanation:

The given parameters are;

The mass of the alcohol = 21 g

The density of the of the alcohol = 0.7 g/cm³

The mass of water with whichit is mixed = 10 g

The density of water = 1.0 g/cm³

Therefore, the mass of the mixture, m = 21 g + 10 g = 31 g

Volume = Mass/Density

The volume of the alcohol = 21 g/(0.7 g/cm³) = 30 cm³

The volume of the water = 10 g/(1.0 g/cm³) = 10 cm³

Therefore, the volume of the mixture, V = 30 cm³ + 10 cm³ = 40 cm³

The density of the mixture, ρ = (Mass, m)/(Volume, V) = m/V

∴ ρ = (31 g)/(40 cm³) = 0.775 g/cm³

The density of the mixture, ρ = 0.775 g/cm³.

The name given to it is "terminal velocity".

In reality, it isn't a velocity, and it doesn't happen in free-fall.

Go figure.

Explanation:

sorry I've got a bad hand writing but i think ull understand more with the screenshot that I've just pinned for u there

Answer:

this guy has answed ur question lol

Answer:

Quantity of charge = 80 Coulombs

Explanation:

Given the following data;

Current = 2 A

Time = 40 seconds

To find the amount of charge flowing through the light bulb;

Mathematically, the quantity of charge passing through a conductor is given by the formula;

Quantity of charge = current * time

Substituting into the formula, we have;

Quantity of charge = 2 * 40

Quantity of charge = 80 Coulombs

Answer:

True

Explanation:

The team with the most points at the end of the game is the winner.

Answer:

the thin steel wall because that wall is so very to fast broke