Answer:
The mathematical function that represents breaking bonds requiring energy in a computational model is the addition symbol (+).
Breaking a bond requires the input of energy, which means that energy is being added to the system. Therefore, the energy required to break a bond can be represented as a positive value, which is added to the total energy of the system. For example, if the energy required to break a bond is 10 joules, and the initial energy of the system is 100 joules, the total energy after the bond is broken would be 110 joules.
On the other hand, when forming bonds, energy is typically released or given off by the system. This means that the energy required for bond formation can be represented by a negative value, which would be subtracted from the total energy of the system.
Explanation:
calculate the total percent recovery. show calculation with units and correct significant digits. why do we expect that the percent recovery will be less than 100 % for this experiment?
The percent recovery is the ratio of the actual amount of the desired substance to the original amount present. The total percent recovery can be calculated by using the formula given below.
The units and the correct significant digits should be used in the calculation. We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure. For example, if the product is left on the filter paper while washing, then the actual yield will be less than the theoretical yield.
Calculate the total percent recovery. show calculation with units and correct significant digits. The percent recovery formula is:
Percent recovery = Actual yield ÷ Theoretical yield × 100%
Given, Actual yield = 70 theoretical yield = 80
percentage recovery = Actual yield ÷ Theoretical yield × 100 %
Percentage recovery = 70 ÷ 80 × 100 %
Percentage recovery = 0.875 × 100 %
Percentage recovery = 87.5 %
Therefore, the total percent recovery is 87.5 % with the correct significant digits. Why do we expect that the percent recovery will be less than 100 % for this experiment? We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure.
Learn more about percent recovery at brainly.com/question/14972210
#SPJ4
If 50 grams of sodium chloride are mixed with 100 grams of water at 80°C, how much will not dissolve?
To determine how much sodium chloride will not dissolve, we need to know the solubility of NaCl at 80°C. At 80°C, the solubility of NaCl in water is 37.8 g/100 mL.
We have 100 grams of water which is equivalent to 100/1000 = 0.1 L of water.
The maximum amount of NaCl that can dissolve in 0.1 L of water at 80°C is:
37.8 g/100 mL x 0.1 L = 0.378 x 10 g = 3.78 g
Since we have 50 grams of NaCl, which is greater than the maximum amount that can dissolve, the excess amount that will not dissolve is:
50 g - 3.78 g = 46.22 g
Therefore, 46.22 grams of NaCl will not dissolve.
running water dissolves soluble minerals. this material is most likely to be transported by a stream as
The running water dissolves soluble minerals, and this material is most likely to be transported by a stream as a solution.
Soluble minerals are minerals that dissolve in water. Water can dissolve many substances, including gases and solids.
Most minerals are insoluble in water, which means they do not dissolve in water.
Running water dissolves soluble minerals. When these minerals dissolve, they form a solution in the water. Dissolved solids or dissolved minerals in water are called dissolved loads.
Thus, dissolved soluble minerals are most likely to be transported by a stream as a solution.
Learn more about dissolved soluble minerals here:
brainly.com/question/937307
#SPJ11
In which solvent AgCl is most soluble?
The concentration of ammonia in the solvent rises, the solubility of AgCl increases. Thus, in the solvent aqueous ammonia, AgCl is most soluble.
AgCl is most soluble in aqueous ammonia. AgCl is a chemical compound that is formed when silver nitrate and hydrochloric acid are combined. It is a white solid that is moderately soluble in water.
The solubility of AgCl in various solvents, such as water, ethanol, and aqueous ammonia, has been studied. AgCl is most soluble in aqueous ammonia.
When AgCl is dissolved in aqueous ammonia, a complex ion called the diammine silver(I) cation, [Ag(NH3)2]+, is formed. The AgCl crystal structure is disrupted by the presence of ammonia molecules, resulting in increased solubility. Here is the equation for the dissolution of AgCl in aqueous ammonia:
AgCl(s) + 2NH3(aq) → [Ag(NH3)2]+(aq) + Cl−(aq)
The solubility of AgCl in aqueous ammonia is temperature-dependent. As the temperature increases, the solubility of AgCl in aqueous ammonia increases. As the temperature decreases, the solubility of AgCl in aqueous ammonia decreases.
for such more question on aqueous ammonia
https://brainly.com/question/14672082
#SPJ11
Fill in the left side of this equilibrium constant equation for the reaction of hypochlorous acid with water
The left side of this equilibrium constant equation for the reaction of hypochlorous acid with water is filled as
HClO + H₂O ⇌ H₃O⁺ + ClO⁻
When HClO reacts with water, it can undergo a reversible dissociation reaction, which results in the formation of hydronium ions (H3O+) and hypochlorite ions (ClO-). Therefore, we can fill in the left side of the equation as follows,
HClO + H₂O ⇌ H₃O⁺ + ClO⁻
Note that the reaction can occur in both directions, and the equilibrium constant (K) expresses the ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.
To know more about equilibrium constant, here
brainly.com/question/10038290
#SPJ4
--The complete question is, Fill in the left side of this equilibrium constant equation for the reaction of hypochlorous acid with water
HClO + H2O ⇌ _____ + _____--
The solubility of KCl at 40 degrees Celsius is 39 g in 100 g of water. Suppose 82 g of KCl is added to 200 g of water at 40 degrees Celsius. Is it true that at equilibrium, most, but not all, of the KCl is dissolved and the solution is saturated? Explain.
It's not true, no. The resultant solution will be unsaturated because it contains less KCl than the amount that will solubilize in 100 g of water at 40°C, which is 39 g, when 82 g of KCl is added to just 200 g of water.
The greatest quantity of solute that may dissolve in a given amount of solvent at a certain temperature and pressure to create a saturated solution is known as solubility. The solubility of KCl in this situation at 40°C is 39 g in 100 g of water. The solution will be unsaturated if 200 g of water are combined with 82 g of KCl at 40 °C. Because more KCl has been supplied than can dissolve in 200 g of water but less than can dissolve in 300 g of water, this has occurred (100 g for each 100 g of water).
learn more about solubility here:
https://brainly.com/question/22185953
#SPJ4
Which equimolar mixture would result in a buffer with a pH less than 7?a) HF with KFb) HBr with KBrc) NaOH with NaCld) NH3 with NH4NO3e) HClO with HClO2
NH₃ with NH₄NO₃ equimolar mixture would result in a buffer with a pH less than 7. The answer is (d) .
A buffer solution is made up of a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of a buffer solution depends on the pKa of the weak acid or the weak base and the ratio of the concentrations of the weak acid and its conjugate base, or the weak base and its conjugate acid.
In this case, NH₃ is a weak base with a pKa of 9.25, and NH⁴⁺ is its conjugate acid. NH₄NO₃ is a salt of NH4+ and NO³⁻, and it will dissociate in water to form NH⁴⁺ and NO³⁻. Since NH⁴⁺ is the conjugate acid of NH₃, it will react with any added OH⁻ ions, preventing the pH from rising above 7. Therefore, NH₃ with NH₄NO₃ would result in a buffer with a pH less than 7.
To know more about buffer, here
brainly.com/question/22821585
#SPJ4
caproic acid, which is responsible for the foul odor of dirty socks, is composed on c, h, and o atoms. combustion of a 0.225 g sample of this acid produces 0.512 g co2 and 0.209 g h2o. What is the empirical formula of caproic acid?
The empirical formula of caproic acid is [tex]C_4H_8O[/tex].
What is caproic acid? Caproic acid, also known as hexanoic acid, is a six-carbon, straight-chain fatty acid.
Caproic acid has a rancid odor and is commonly found in milk and other dairy items.
Caproic acid can be found in the milk of many mammals, including cows and goats.
What is the empirical formula of caproic acid? The following information was given: 0.225 g of caproic acid was burned, producing 0.512 g of [tex]CO_2[/tex] and 0.209 g of[tex]H_2O[/tex].
To solve the issue, you should start with the combustion reaction:
2 [tex]C_6H_1_2O_2[/tex] + 19 [tex]O_2[/tex] → 12 [tex]CO_2[/tex] + 12 [tex]H_2O[/tex]
The ratios of moles of [tex]CO_2[/tex] to moles of [tex]C_6H_1_2O_2[/tex] are 12:2, or 6:1, and the ratios of moles of [tex]H_2O[/tex] to moles of [tex]C_6H_1_2O_2[/tex] are 12:1, or 6:0.5. This signifies that the stoichiometry of the combustion reaction is [tex]C_6H_1_2O_2[/tex].
Start with the weight of [tex]CO_2[/tex]: 0.512 g/44.01 g/mol = 0.012 mol [tex]CO_2[/tex]
Weight of [tex]H_2O[/tex]: 0.209 g/18.02 g/mol = 0.012 mol [tex]H_2O[/tex]
Since the stoichiometric ratio of the combustion reaction is 1:1, the number of moles of [tex]C_6H_1_2O_2[/tex] must be equal to the number of moles of [tex]CO_2[/tex] or [tex]H_2O[/tex].
Therefore, [tex]C_6H_1_2O_2[/tex] is 0.012 mol. Divide the molar mass of [tex]C_6H_1_2O_2[/tex] by 0.012 mol to get the molecular mass of [tex]C_6H_1_2O_2[/tex]: 0.225 g/72.09 g/mol = 0.00312 mol.
The subscripts of [tex]C_4H_8O[/tex] can be determined by dividing the number of atoms in [tex][tex]C_6H_1_2O_2[/tex][/tex] by the greatest common factor of all subscripts.
Divide all by 0.00312 to obtain the empirical formula: [tex]C_4H_8O[/tex]
Learn more about empirical formula: https://brainly.com/question/1603500
#SPJ11
Which of these ions has the smallest number of unpaired electrons? o Ni2+ oV2+ oCr2+ oFe3+ oCo2+.
The ion with the smallest number of unpaired electrons is Co2+ . This is because Nickel (Ni) has a total of 10 electrons in its valence shell, which can be arranged into the following electron configuration: 1s2 2s2 2p6 3s2 3p6 3d8. This arrangement allows for all of Nickel's electrons to be paired, resulting in 0 unpaired electrons.
The ion that has the smallest number of unpaired electrons is Co2+. The reason for this is as follows:An unpaired electron is defined as an electron that occupies a particular atom's orbital without any other electron. It is crucial to consider that elements or ions with half-filled or completely filled orbitals are more stable than those with partially filled orbitals. Thus, it is essential to consider how many unpaired electrons each of these ions has before answering which of these ions has the smallest number of unpaired electrons.
Looking at the electron configurations of each ion, we can see that Ni2+ and V2+ both have three unpaired electrons, Cr2+ has four unpaired electrons, Fe3+ has five unpaired electrons, and Co2+ has seven unpaired electrons. This indicates that the ion with the smallest number of unpaired electrons is Co2+.
Thus, Co2+ has the smallest number of unpaired electrons.
For more such questions on electrons , Visit:
https://brainly.com/question/371590
#SPJ11
Rank the following items in order of decreasing radius: K, K^+, and K^-. Rank from largest to smallest radius. To rank items as equivalent, overlap them.
K, K^+, and K^-
Largest radius Smallest radius
______________ ______________
In isoelectronic species, the species that have the least number of electrons will have the smallest radius. Therefore, K+ has the smallest radius amongst K, K+ and K-.The order of the radius of the given species can be given as follows:
K > K⁻ > K⁺
The effective nuclear charge experienced by the K atom is +1, as it has one valence electron which can shield 18 electrons. Therefore, the attraction between the valence electron and the nucleus is weak which makes the atomic size larger than that of K- and K+.
The effective nuclear charge experienced by the K-atom is +1, as it has one valence electron which can shield 17 electrons. The attraction between the valence electron and the nucleus is stronger than in K due to less screening effect by electrons. Therefore, the atomic size is smaller than that of K.
The effective nuclear charge experienced by the K⁺ atom is +1, as it has one valence electron which can shield 19 electrons. The attraction between the valence electron and the nucleus is maximum in K+ due to the absence of one electron from the 4s orbital. Therefore, the atomic size is the smallest among the given species.
To know more about isoelectronic species:
https://brainly.com/question/30633067
#SPJ11
the reaction of magnesium metal with hcl yields hydrogen gas and magnesium chloride. what is the volume, in liters, of the gas formed at 720 torr and 34 oc from 1.30 g of mg in excess hcl? (hint, first write the balanced equation.)
The volume of H₂ gas produced from 1.30 g of Mg in excess HCl is 0.0019 L.
The balanced equation for the reaction of magnesium metal with HCl is:
Mg + 2HCl → MgCl₂ + H₂
The molar mass of Mg is 24.31 g/mol.
The mass of Mg that reacted = 1.30 g
The moles of Mg that reacted = 1.30 g ÷ 24.31 g/mol = 0.0535 mol
According to the balanced equation, 1 mol of Mg reacts with 1 mol of H₂
Therefore, 0.0535 mol of Mg will produce 0.0535 mol of H₂.
Since, the volume of gas produced is proportional to the number of moles of the gas, we can use the ideal gas equation to find the volume of H₂
PV = nRT
Where, P = 720 torr = 720/760 atm (1 atm = 760 torr)
T = 34 + 273 = 307 K
R = 0.0821 L·atm/mol·K
V = n × 0.0821 L·atm/mol·K × 307 K/ 720 torr = 0.0535 mol/ 720 torr × 25.2047 L/molK =0.0019 L
At 720 torr and 34 °C, 0.0535 mol of hydrogen occupies a volume of 0.0019 L.
To learn more about "volume of hydrogen", visit: https://brainly.com/question/30176170
#SPJ11
what gas law(two varible relationship) is employed to deflate a football? state the name and show the equation
The gas law that is employed to deflate a football is Boyle's law.
Boyle's law states that for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other. The equation for Boyle's law is:
[tex]P_{1} V_{1} /P_{2} V_{2}[/tex]
Where [tex]P_{1}[/tex] is the initial pressure of the gas, [tex]V_{1}[/tex] is the initial volume of the gas,[tex]P_{2}[/tex] is the final pressure of the gas, and [tex]V_{2[/tex] is the final volume of the gas. In the case of deflating a football, the pressure of the air inside the football is reduced by letting some of the air out. The volume of the football decreases as the pressure decreases, and this is in accordance with Boyle's law.
Therefore, The Boyle's Law is used to deflate a football. It states that the volume of a gas is inversely proportional to its pressure, when the temperature is constant.
To know more about Boyle's law refer here :
https://brainly.com/question/1696010
#SPJ11
molecules that can absorb light in the visible range are called
The molecules that can absorb light in the visible range are called pigments.
What is a pigment?
Pigments are compounds that absorb light and reflect only some wavelengths, resulting in color production.
The molecules are capable of absorbing specific wavelengths of light, giving them the potential to interact with photons.
The visible range of light is absorbed by pigments.
The term "chromophore" is used to describe the light-absorbing portion of a pigment molecule.
The portion of the molecule that absorbs light in the visible region is the chromophore.
The pigments' physical and chemical properties affect the absorption spectrum.
Pigments have a characteristic absorption spectrum, which is the range of wavelengths they can absorb.
When pigments absorb light, they become excited, and this energy is used to fuel biological processes.
Pigments are an essential component of photosynthesis, which is the process by which plants use sunlight to make energy.
Chlorophyll a, chlorophyll b, and carotenoids are examples of pigments in plants that absorb light energy from the sun. In humans, pigments such as melanin and hemoglobin are involved in coloration and oxygen transportation, respectively.
In conclusion, molecules that can absorb light in the visible range are called pigments.
The term "chromophore" is used to describe the light-absorbing portion of a pigment molecule.
For similar question on pigments.
https://brainly.com/question/4658273
#SPJ11
in fireworks, the heat of the reaction of an oxidizing agent, such as kclo4, with an organic compound excites certain salts, which emit specific colors. strontium salts have an intense emission at 641 nm. what is the energy (in kj) of this emission for 4.09 g of the chloride salt of strontium? assume that all the heat produced is converted to emitted light. enter to 2 decimal places. (mts 2/17/2018)
The energy emitted by 4.09 g of strontium chloride salt is 8.01 8.00 x 10⁻²⁴ kJ (rounded to 2 decimal places).
What is the emission energy?
To determine the energy of the emission at 641 nm, we can use the formula:
E = hc/λ
where;
E is the energy, h is Planck's constant (6.626 x 10⁻³⁴ J·s), c is the speed of light (3 x 10⁸ m/s), and λ is the wavelength in meters.First, we need to convert the wavelength from nanometers to meters:
641 nm = 641 x 10⁻⁹ m
Next, we can plug in the values and solve for E:
E = (6.626 x 10⁻³⁴J·s)(3 x 10⁸ m/s)/(641 x 10⁻⁹ m)
E = 3.10 x 10⁻¹⁹ J
To convert from joules to kilojoules, we divide by 1000:
E = 3.10 x 10⁻²² kJ
Now we can use the molar mass of the chloride salt of strontium to calculate the total energy released:
SrCl₂ has a molar mass of 158.53 g/mol, so 4.09 g is equivalent to:
n = 4.09 g / 158.53 g/mol
n = 0.0258 mol
The energy released by 0.0258 mol of strontium chloride at 100% efficiency is:
E_total = nE
E_total = (0.0258 mol)(3.10 x 10⁻²² kJ/mol)
E_total = 8.00 x 10⁻²⁴ kJ
Learn more about energy of emission here: https://brainly.com/question/24213957
#SPJ1
In which situation are unbalanced forces acting on an object?(1 point)
An object is said to be acted upon by an unbalanced force only when there is an individual force that is not being balanced by a force of equal magnitude and in the opposite direction.
An unbalanced force refers to a situation where the net force acting on an object is not equal to zero, which causes the object to accelerate in a particular direction. In other words, when the forces acting on an object are unbalanced, the object will either speed up, slow down, or change direction.
According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Therefore, when an unbalanced force acts on an object, it will experience an acceleration proportional to the force applied. an unbalanced force is a force that causes an object to accelerate in a particular direction due to an imbalance in the forces acting on it.
To learn more about Unbalanced force visit here:
brainly.com/question/30459051
#SPJ4
During the 'relative refractory period' of the action potential, the axolemma is more permeable to what?
During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.
What is axolemma?Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.
When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.
The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.
Learn more about Relative refractory period here:
https://brainly.com/question/30460363
#SPJ11
a mixture of 2.5 moles of nitrogen gas and 1.8 moles of hydrogen gas at 273 k were placed in a 11.2 liters container. what is the pressure of this gas mixture?
The pressure of the gas mixture is 8.84 atm.
The pressure of the gas mixture is determined by the Ideal Gas Law, which states that the pressure of a gas is equal to the number of moles of the gas multiplied by the gas constant, R, multiplied by the temperature of the gas in Kelvin, divided by the volume of the container.
To find the pressure of the gas mixture, we can use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
To calculate the total number of moles of gas in the container:
total moles of gas = 2.5 moles (nitrogen) + 1.8 moles (hydrogen)
total moles of gas = 4.3 moles
To convert the temperature from Celsius to Kelvin by adding 273:
T = 273 K
The value of the ideal gas constant, which is 0.0821 L·atm/K·mol.
P = nRT / V
P = (4.3 moles)(0.0821 L·atm/K·mol)(273 K) / 11.2 L
P = 8.84 atm
Therefore, the pressure of the gas mixture is 8.84 atm.
To know more about ideal gas law click here:
https://brainly.com/question/28257995
#SPJ11
P. Explain Phenomena How can bioremedia-
tion play a role in cleaning up an oil spill?
The technique of bioremediation involves using local microorganisms to absorb or degrade different parts of spilled oil in maritime environments.
How will the offshore oil issue be resolved by the bioremediation process?Bacteria can be utilised to remediate oil spills in the marine through bioremediation. Hydrocarbons, which are found in oil and gasoline, are one type of specialised contamination that can be bioremediated using particular bacteria.
What are the implications of bioremediation for oil slicks?As a result of bioremediation, there is no longer a need to collect and shift the harmful substances to another location because natural organisms may convert the toxic molecules into harmless simple molecules (Venosa).
To know more about absorb visit:
https://brainly.com/question/30867928
#SPJ1
According to octet rule, atoms tends to acheive _____ electrons in the outermost shell.A sixB fourC eightD one
According to the octet rule, atoms tend to achieve eight electrons in the outermost shell. The reason behind this tendency is that the atoms try to achieve a stable electronic configuration, which is similar to the noble gases, whose electronic configuration is stable.
The arrangement of an atom's or molecule's (or other physical structure's) electrons in their atomic or molecular orbitals is known as the electron configuration in atomic physics and quantum chemistry. For instance, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the 1s, 2s, and 2p subshells. According to electronic configurations, each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. Slater determinants or configuration state functions are used to mathematically describe configurations. For systems with a single electron, the laws of quantum mechanics state that each electron configuration has a specific amount of energy, and that under certain circumstances, electrons can switch between configurations.
Electronic configuration is the distribution of electrons in various shells or orbitals. According to the octet rule, the outermost shell of the atoms must contain eight electrons for the atom to be stable. The octet rule is one of the essential rules that govern the formation of chemical compounds. It states that atoms tend to combine with other atoms in such a way that they will have eight electrons in their outermost shell or valence shell, which makes them more stable. The octet rule explains that the atoms combine or share electrons to form a compound in a way that each atom achieves eight electrons in its valence shell.
The sharing or transfer of electrons from one atom to another results in the formation of ionic or covalent bonds, which is the basis of chemical reactions.
For more such questions on electronic configuration , Visit:
https://brainly.com/question/26084288
#SPJ11
some elements and/or ions are isoelectronic, which means that they have the same number of electrons in the same orbitals, albeit with different nuclei. Which of the following is not isoelectronic with the others?a. S2-b. Arc. Sc3+d. Ti4+e. Ga3+
Option B Ar is the correct answer, which is not isoelectronic with the others. Therefore, S2−, Sc3+, Ti4+, and Ga3+ are isoelectronic.
Elements are different from ions in that they have the same number of electrons and protons. It is said that some elements and/or ions are isoelectronic, implying that they have the same number of electrons in the same orbitals, although with different nuclei.What is the meaning of Isoelectronic? In the case of chemical elements, the term "isoelectronic" is used to describe atoms, ions, or molecules that have the same number of electrons. Two or more atomic species are said to be isoelectronic if they contain the same number of electrons in the same electronic configuration, despite the fact that their atomic numbers are different. In contrast, the term "isotonic" is used to describe two or more species having the same number of nucleons (i.e. the same total number of protons and neutrons).The correct answer is option B, as it is not isoelectronic with the others. Argon, denoted by the symbol "Ar," is a chemical element with the atomic number 18, indicating that it contains 18 electrons. Argon is a noble gas that has a completely filled outer shell with eight electrons in the n = 2 shell and eight electrons in the n = 3 shell. However, S2− has 18 electrons, which are present in the same electron configuration as Argon.Sc3+ has 18 electrons, which are present in the same electron configuration as Argon.Ti4+ has 18 electrons, which are present in the same electron configuration as Argon.Ga3+ has 18 electrons, which are present in the same electron configuration as Argon.As a result, option B Ar (Argon) is not isoelectronic with the others. Therefore, the correct option is B.Learn more about isoelectronic: https://brainly.com/question/1626090
#SPJ11
draw the organic product that is expected to form when the following compound is treated with aqueous naoh.
The organic product that is expected to form when the following compound is treated with aqueous NaOH is RCOONa + H₂O .
The given compound is a carboxylic acid. When treated with aqueous NaOH, it will undergo a reaction known as neutralization to form the corresponding salt of the carboxylic acid.The reaction mechanism is as follows;The first step is the dissociation of NaOH into its ions
NaOH → Na⁺ + OH⁻
Secondly, there will be proton transfer between the carboxylic acid and the OH ion of NaOH as follows:
RCOOH + OH⁻ → RCOO⁻ + H₂O
With this, we can draw the organic product expected to form when the given compound is treated with aqueous NaOH as shown below: OR RCOONa + H₂O. The product formed is the salt of the given carboxylic acid.
More on organic products: https://brainly.com/question/17150018
#SPJ11
according to the beer-lambert law, as the concentration decreases so should the absorbance. true false
According to the Beer-lambert law, as the concentration of a substance decreases so should the absorbance of the solution. Thus, the given statement is true.
What is the Beer-lambert law?The Beer-Lambert Law, also known as Beer's Law, Lambert's Law, or the Beer-Lambert-Bouguer Law, is a linear relationship between the attenuation of light and the properties of the material through which the light is traveling.
The Beer-Lambert Law relates the attenuation of light to the properties of the material it travels through. When light passes through a material, it is absorbed, reflected, or scattered in different amounts. The Beer-Lambert Law explains the attenuation of light as a result of the following factors:
Attenuation of light = Absorption of light + Scattering of light + Reflection of light
The Beer-Lambert Law states that the concentration of a material is directly proportional to the amount of light it absorbs. Absorbance decreases as the concentration of the solution decreases according to the Beer-Lambert Law.
Hence, the given statement is true.
Learn more about Beer-lambert law here:
https://brainly.com/question/30404288
#SPJ11
The specific heat capacity of water is 1.00 cal/g °C. 700.00 cal is required to raise the temperature of 25.0g water from 22.0°C to 50°C.
What is the final temperature of the above water sample if 1.00kcal of heat is provided?
When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.
What does "specific heat" mean?The amount of energy required to raise a substance's temperature is measured in terms of specific heat. It is the amount of energy (measured in joules) required to increase a substance's temperature by one degree Celsius per gram.
We must first determine the water sample's original temperature. The formula is as follows:
Q = mcΔT
Inputting the values provided yields:
700.00 cal = 25.0 g x 1.00 cal/g °C x (50°C - 22.0°C)
When we simplify this equation, we obtain:
ΔT = 700.00 cal / (25.0 g x 1.00 cal/g °C) = 28.0°C
Therefore, the initial temperature of the water sample is 22.0°C + 28.0°C = 50.0°C.
Inputting the values provided yields:
1.00 kcal = 25.0 g x 1.00 cal/g °C x (T - 50.0°C)
When we simplify this equation, we obtain:
T - 50.0°C = 1.00 kcal / (25.0 g x 1.00 cal/g °C) = 40.0°C
Therefore, When 1.00 kcal of heat is applied, the water sample's final temperature is T = 50.0°C + 40.0°C = 90.0°C.
To know more about specific heat visit:-
https://brainly.com/question/11297584
#SPJ1
why is the corrective term to the volume subtracted and not added to the volume in the van der waals equation?
The corrective term to the volume in the Van der Waals equation is subtracted and not added because this allows the equation to accurately predict the behavior of real gases.
The Van der Waals equation is an equation of state, which describes the behavior of real gases. Since the actual behavior of real gases is to decrease in volume as the pressure increases, subtracting the corrective term allows the equation to predict this behavior.
The Van der Waals equation is an equation that describes the behavior of real gases. It is based on the Ideal Gas Law but includes two corrective terms:
one for the volume and one for the pressure. The equation is as follows: (P + a(n/V)²)(V - nb) = nRT
where: P = pressure ,V = volume , n = number of moles , R = gas constant , T = temperature , a = a constant that takes into account the attractive forces between gas particles, b = the volume of one mole of gas particles
For the volume term in the equation, the corrective term is -nb.
Hence , This term subtracts the volume of the gas particles themselves from the total volume. This is necessary because gas particles occupy some volume and therefore reduce the total volume of the gas. Without this corrective term, the equation would not accurately predict the behavior of real gases.
To know more about Real gases refer here :
https://brainly.com/question/15962335
#SPJ11
Is a measuring tape used in millimeters or centimeters
Answer: Centimeters
Explanation: no explanation needed
reverse-phase tlc uses silica that is modified to have octadecane (c18) molecules at the surface instead of hydroxyl groups. if you repeated this experiment using reverse-phase tlc plates, in what order would you predict the compounds will elute? provide an explanation for your prediction.
In reverse-phase TLC (Thin-Layer Chromatography), the stationary phase is hydrophobic, while the mobile phase is typically a polar solvent. In this case, the stationary phase is modified silica with octadecane (C18) molecules at the surface instead of hydroxyl groups.
The elution order in reverse-phase TLC is generally determined by the polarity of the compounds being separated. Polar compounds tend to interact more strongly with the stationary phase, leading to slower movement and delayed elution. On the other hand, non-polar compounds have weaker interactions with the stationary phase and elute faster.
With the C18-modified silica stationary phase, the octadecane molecules provide a hydrophobic environment that favors the interaction with non-polar or hydrophobic compounds. The elution order in reverse-phase TLC is the opposite of normal-phase TLC, where more polar compounds elute first.
Therefore, the elution order in reverse-phase TLC is generally non-polar/hydrophobic compounds first, followed by moderately polar compounds, and finally by polar compounds.
For more detail regarding TLC (Thin-Layer Chromatography), visit:
https://brainly.com/question/10296715
#SPJ12
66. rocket fuel the exothermic reaction between liquid hydrazine (n2h4 ) and liquid hydrogen peroxide (h2o2 ) is used to fuel rockets. the products of this reaction are nitrogen gas and water. a. write the balanced chemical equation. b. how much hydrazine, in grams, is needed to produce 10.0 mol of nitrogen gas?
320.45 grams of hydrazine are needed to produce 10.0 mol of nitrogen gas.
What is Hydrazine?
It is a colorless, flammable, and highly toxic liquid with an ammonia-like odor. Hydrazine is used in a variety of industrial applications, including as a rocket propellant, polymerization catalyst, and in the production of pesticides, pharmaceuticals, and other chemicals.
a. The balanced chemical equation for the reaction between hydrazine and hydrogen peroxide is:
N2H4 (l) + H2O2 (l) → N2 (g) + 2H2O (l)
b. To determine the amount of hydrazine required to produce 10.0 mol of nitrogen gas, we can use stoichiometry and the balanced chemical equation.
From the equation, we can see that 1 mole of N2 is produced for every mole of N2H4 consumed. Therefore, the amount of N2H4 required can be calculated as:
10.0 mol N2H4 / 1 mol N2 = 10.0 mol N2H4
To convert from moles of N2H4 to grams, we need to use the molar mass of N2H4, which is 32.045 g/mol. Therefore, the mass of N2H4 required can be calculated as:
10.0 mol N2H4 x 32.045 g/mol = 320.45 g
Learn more about Hydrazine from given link
https://brainly.com/question/7484865
#SPJ1
When a bond is broken, bond
energy is required. If energy is
required and a bond is being
broken, what sign (+ or -) would
you use to represent that energy change?
Answer:
Bond enthalpy is always positive because energy is required to break chemical bonds. Energy is released when a bond forms between gaseous fragments.
which property is a main difference between a nucleic acid and a carbohydrate?
The main difference between nucleic acids and carbohydrates is that nucleic acids are made up of nucleotides, while carbohydrates are made up of monosaccharides.
Therefore, the property that distinguishes nucleic acids from carbohydrates is their composition of nucleotides, which are the basic structural units of nucleic acids.
What are nucleic acids?
Nucleic acids are the biomolecules that encode and transmit genetic information in cells.
They are primarily composed of carbon, nitrogen, oxygen, and phosphorus, and are formed by polymerization reactions in which nucleotides are joined by phosphodiester bonds to form polynucleotide chains.
What are carbohydrates?
Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen, with the general formula CnH2nOn.
They are classified based on the number of monosaccharide units they contain, with monosaccharides being the simplest and most basic carbohydrate units.
Carbohydrates serve as a source of energy and a structural component in living organisms.
For similar question on nucleic acids.
https://brainly.com/question/12206202
#SPJ11
Please Help me with this question, No.4
17.0 g of Al₂O₃ forms from 16 g of O₂ and excess Al ,and when the molar mass of Al₂O₃ is 102 g/mol.
What is molar mass?Molar mass is the mass of one mole of a substance. It is usually expressed in units of grams per mole (g/mol). For example, the molar mass of carbon is 12.01 g/mol, which means that one mole of carbon has a mass of 12.01 grams. Molar mass is useful in chemistry because it allows us to convert between mass and moles of a substance, which is important for many chemical calculations.
The molar mass of Al₂O₃ is 102 g/mol, which means that for every 102 g of Al₂O₃ produced, 3 × 32 g (or 96 g) of O₂ is consumed.
We can use this ratio to find the mass of Al₂O₃ formed from 16 g of O₂:
96 g of O₂ produces 102 g of Al₂O₃
1 g of O₂ produces (102 g / 96 g) of Al₂O₃
16 g of O₂ produces (102 g / 96 g) × 16 g = 17.0 g of Al₂O₃
To know more about Molar mass, visit:
https://brainly.com/question/22997914
#SPJ1