how does the amount of strokes on a magnet affect the strength of it? Note- I'm NOT a high schooler. Simple answers please. I'm 11.

The statement that best describes the relationship between how consumers engage with product and service based brands is C. Though product and service brands both seek likes from consumers, consumers are more likely to "like" product brands because they can

accoce the quality of the product more.

The relationship between how consumers engage with product and service based brands is complex and multifaceted. Both types of brands seek to establish a strong relationship with their consumers through various strategies, such as effective advertising, personalized communication, quality customer service, and social media engagement.

However, the specific strategies employed by product and service brands may differ depending on the nature of their offerings and the preferences of their target audience. For instance, product brands may focus on showcasing the quality, features, and benefits of their products through visual and sensory experiences, while service brands may emphasize the expertise, reliability, and personalization of their services through word-of-mouth recommendations and customer reviews.

Learn more about consumer on;

https://brainly.com/question/24438632

#SPJ1

Which statement best describes the relationship between how consumers engage with product and service based brands?

A. Though product and service brands both seek likes from consumers, they have many more effective strategies to attract consumers to their product than social media.

B. Service brands seek likes from consumers more than product brands do because they rely on recommendations from their consumers in order to attract new business.

C. Though product and service brands both seek likes from consumers, consumers are more likely to "like" product brands because they can

accoce the quality of the product more.

The linear acceleration of the falling bucket can be calculated using the formula.

a = g - (T/M)

where g is the acceleration of gravity (9.8 m/s²), T is the torque exerted by the pulley (T = Iα, where I is the moment of inertia, and α is the angular acceleration), and M is the mass of the bucket. We can calculate the torque of the pulley by substituting the given values:

T = (1/2 M r²) * (α)

T = (1/2) * (7.7 kg) * (0.532 m)² * (α)

T = 2.01 (kg m²) * (α).

Therefore,

a = 9.8 m/s² - (2.01 (kg m^2) * (α) /2.4 kg)

a = 9.58 m/s²

The distance traveled by the bucket can be calculated using the formula

d = (1/2) * a * t²

where a is the acceleration of the bucket (9.58 m/s²) and t is the time it takes to fall (4.5 s).

Therefore,

d = (1/2) * (9.58 m/s²) * (4.5 s)²

d  = 98.2 m

The angular acceleration of the cylinder can be calculated using the formula

α = T/I

where T is the torque exerted by the pulley (2.01 (kg m²) * (α)) and I is the moment of inertia (1/2 M r²).

Therefore,

α = 2.01 (kg m²) * (α) / (1/2) * (7.7 kg) * (0.532 m)²

α = 10.3 rad/s²

Learn more about angular acceleration at https://brainly.com/question/13014974

#SPJ11

When a current travels through a conductor in a circular motion, a magnetic field with growing concentric circles is created.

Electromagnetism is established when an electrical current flows through a simple conductor, such as a length of wire or cable.

As magnetic fields produced by moving charges are proportional to the current, a conductor carrying current creates a magnetic field around it. Generally speaking, the sub-atomic particles in the conductor, such as the moving electrons in the atomic orbitals, are responsible for this magnetic field.

To know more about conductor visit:-

https://brainly.com/question/8426444

#SPJ1

Hydrogen is not a dominant component of the atmospheres of the terrestrial planets, even though it is the most common element in the universe and solar system because it is a volatile and low molecular weight element.

Hydrogen element is not a dominant component of the atmospheres of the terrestrial planets, even though it is one of the most common element in the universe and in the solar system as well because the planets were formed through the accretion.

Accretion is the process by which the small particles combine into progressively larger bodies which become planets. As a result of this, the process left behind the lighter gas elements such as hydrogen and helium. The gas molecules of hydrogen atom are lighter than the rest of the chemical elements, therefore the gravity of the terrestrial planets is not sufficient to hold them. As a result, hydrogen escapes from the planet's atmosphere, leaving behind the heavier elements like carbon dioxide, nitrogen, and oxygen in their atmospheres.

Therefore, although hydrogen is the most common element in the universe and in the solar system, it is not a major constituent of the terrestrial planets.

Learn more about Hydrogen atom here:

https://brainly.com/question/8806577

#SPJ11

When you look at a spiral that appears to move inward for about a minute, and then look at a stationary object, the object will briefly appear to move outwards. This phenomenon is known as the motion aftereffect (MAE).

After staring at the spiral for about a minute, your brain becomes accustomed to the constant motion of the spiral. When you look away from the spiral and fix your gaze on a stationary object, your brain continues to perceive motion in the opposite direction (outwards).

This is why the stationary object appears to move outwards for a brief period. The motion aftereffect is an example of the adaptation process that takes place in the visual system. It is a perceptual illusion that occurs when the brain is exposed to a particular type of visual stimulus for a prolonged period of time.

Hence, when you look at a spiral that appears to move inward for about a minute, and then look at a stationary object, the object will briefly appear to move outwards.

To know more about Motion Aftereffect, refer here:

https://brainly.com/question/15556402#

#SPJ11

The pressure drop due to the Bernoulli effect is 33.14 Pa. and

A). P1 + (1/2)ρv1² = P2 + (1/2)ρv2²

P1 + (1/2)ρv1² = P2 + (1/2)ρ(7.28v1)²

P1 - P2 = (1/2)ρ(v2² - v1²)

P1 - P2 = (1/2)(1000 kg/m³)(7.28² - 1) v1²

P1 - P2 = 20,710 v1²

Substituting the values, we get:

P1 - P2 = 20,710 (0.040)²

P1 - P2 = 33.14 Pa

B). (1/2)mv2² = mgh

The mass of water that enters the nozzle per second is:

ρAv2 = (1000 kg/m³)(3.8 cm²)(7.28v1)

ρAv2 = 26.86v1

Substituting this into the conservation of energy equation, we get:

(1/2)(26.86v1)v2^2 = (26.86v1)gh

v2^2 = 2gh

Substituting the value of v2 from part (a), we get:

(7.28v1)² = 2gh

Solving for h, we get:

h = ((7.28v1)²)/(2g)

h = ((7.28(40.0/55.4))²)/(2(9.81))

h = 7.05 m

Pressure is a fundamental physical quantity that measures the force exerted per unit area. It is defined as the amount of force per unit area that is applied perpendicular to the surface of an object. Pressure is often represented by the symbol P, and its unit is Pascal (Pa), which is defined as one Newton per square meter (N/m²). In other words, if a force of one Newton is applied uniformly over an area of one square meter, then the pressure exerted is one Pascal.

Pressure can be measured in different ways, depending on the application. For example, in fluid dynamics, pressure can be measured using a manometer or a pressure gauge. In solid mechanics, pressure can be calculated using the stress tensor, which describes the distribution of forces within a solid object.

To learn more about Pressure visit here:

brainly.com/question/12971272

#SPJ4

The magnetic field at the point exactly between the two wires will point away from your point of view is zero. The correct option is C.

The two currents in the wires create a parallel magnetic field, which is oriented so that the same pole is facing each other (in this case, the north pole). This causes the field lines to repel away from each other, creating a magnetic field that points away from the midpoint between the wires.

The magnetic field at the point exactly between the two wires is zero. Two parallel long wires that carry identical currents straight towards us are placed side by side on a horizontal table.

As a result, the net magnetic field is zero.

Therefore, the correct option is C.

Read more about magnetic field here:

https://brainly.com/question/14411049

#SPJ11

In a magnetic field that decreases from 0. 13 T to 0 T in 12 ms, a wire coil with 1200-turns and a 2. 3 cm diameter is placed. The coil's axis is perpendicular to the field. The coil's emf is 0.059 V.

A coil of wire experiences an electromotive force (emf) when it is exposed to a fluctuating magnetic field. The magnetic field across the coil changes at a rate precisely proportionate to the emf. We are given the magnetic field, the coil's size, and its number of turns in this issue. We determine the change in magnetic flux through the coil as the magnetic field weakens over time using the magnetic flux formula. Lastly, we determine the induced emf in the coil using the emf formula. The response, 0.064 V, is the emf's magnitude, and the answer's negative sign denotes the flow of induced current.

learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

The region of the periodic table that the unknown element would likely be found is metals (option A).

Metals are a number of chemical elements in the periodic table that form a metallic bond with other metal atoms.

Metals are generally shiny, somewhat malleable and hard, often a conductor of heat and electricity.

According to this question, an unknown element has good conductivity and is a solid at room temperature. It possesses two valence electrons.

Elements with two valence electrons can be found in group two of the periodic table, which is a metallic element.

Learn more about metals at: https://brainly.com/question/28650063

#SPJ1

A decrease in atmospheric pressure eventually causes air to cool to the dew-point temperature.

Fog on an upward slope forms adiabatically. The process through which ascending air cools and sinking air warms is known as adiabatic cooling. The air rises and cools as wet breezes blow in the direction of a mountain. The dew point temperature is reached as a result of the rising air cooling.

This type happens when air is lifted by sloping terrain and is adiabatically cooled to its dew point and saturation. Depending on the observer's frame of reference, upslope fog can be seen as either a stratus cloud or a fog.

To know more about temperature visit:-

https://brainly.com/question/4160783

#SPJ1

The 8.3 on the Richter scale earthquake magnitude can be withstood by the US Bank Tower in Los Angeles.

A frame that is strengthened in two directions is part of the central core structure. Two struts, each one level high, are employed to decrease horizontal stresses brought on by wind or earthquakes beginning at the 53rd floor.

Indeed, it is the answer. Modern structural design techniques can be used to construct skyscrapers that can resist earthquakes. Performance-based structural design (PBSD), a cutting-edge design methodology for creating earthquake-resistant structures, is one of them.

To know more about magnitude visit:-

https://brainly.com/question/30395926

#SPJ1

oc, it's the closest definition to a short circuit

Answer: almost all the current flows through a part of a parallel circuit, with very low resistance, instead of through the rest of the circuit.

Explanation:

Magnetic poles are similar to electric charges in that they produce fields around them that can attract or repel other objects.

Similar to how electric charges create electric fields around them that can pull or push away other charges, magnetic poles also create magnetic fields that can pull or push away other poles. The distance between the poles and how they are oriented in relation to one another affect the magnetic force's strength. Similarly, the distance between the charges and their orientation in relation to one another affect the strength of the electric force between them. Magnetic poles and electric charges do, however, differ significantly in terms of their origins and how they interact with one another. Magnetic poles always exist in pairs (north and south), unlike electric charges, which can be positive or negative and exist in isolated particles.

Learn more about  Magnetic poles  here:

https://brainly.com/question/3003721

#SPJ4

The radius of the second sphere is approximately 11.95 cm. This can be calculated by the volume of sphere.

The mass is proportional to the volume of the spheres. The volume of a sphere is given by the formula:

V = (4/3)πr³

Let the radius of the first sphere be r₁ (4.45 cm) and the radius of the second sphere be r₂. Given that the mass of the second sphere is six times greater than the first sphere, we can write:

M2 = 6 × M1

Since mass is proportional to volume, we can also say: V2 = 6 × V1

Now, substitute the volume formula for both spheres: (4/3)πr₂³ = 6×(4/3)πr₁³

Divide both sides by (4/3)π to simplify: r₂³ = 6 × r₁³

Plug in the value of r₁ (4.45 cm): r₂³ = 6 × (4.45)³

Now, calculate the value of r₂³: r₂³ ≈ 1683.107

Take the cube root of both sides to find r₂: r₂ ≈ (1683.107)^(1/3) r₂ ≈ 11.95 cm.

So, the radius of the second sphere is approximately 11.95 cm.

Learn more about Sphere here:

https://brainly.com/question/11374994

#SPJ11

a)  The net Work done is zero. b) The work done on the block by the applied force F as the block moves a distance L is -41.2 J. c) The work done on the block by the applied force F as the block moves a distance L is 41.2 J.

Given:

Weight of the block (w) = 25.0 N

Distance moved by the block (d) = 3.40 m

The angle of the inclined plane (θ) = 29.0°

a) we know that from the work-energy theorem,

W = change in kinetic energy

But since speed is constant which means no change in KE, hence the net Work done is zero.

b) W = -mgy

W = -25 × (3.10 × sin29°)

W = -41.2 J

Therefore, the work done on the block by the force of gravity is -41.2 J.

c) The work done on the block by the applied force F as the block moves a distance L = 3.10m up the incline is,

W = Fd

W = 12.1 × 3.1

W = 41.2 J

Therefore, the work done on the block by the applied force F as the block moves a distance L is 41.2 J.

To know more about the work done:

https://brainly.com/question/26622905

#SPJ12

For a given water velocity (distance traveled per unit time), the greater the cross-sectional area of a stream channel, the lower will be the stream flow (discharge: volume of water per unit time)" is a false statement.

Stream discharge is measured by the volume of water flowing per unit of time, which is calculated by multiplying the stream's cross-sectional area (flow width × flow depth) by its water velocity. As a result, the given statement is false.

According to the formula, an increase in the cross-sectional area of the stream will cause a rise in the stream flow (discharge: volume of water per unit time) because it is multiplied by the velocity. So, for a given water velocity, the greater the cross-sectional area of a stream channel, the higher the stream flow (discharge: volume of water per unit time) will be.

Learn more about Stream discharge here:

https://brainly.com/question/8282980

#SPJ11

Without doing a calculation, the compound that has the greatest molar solubility in water among the given compounds is AgCl.

The reason for this is because it has the largest Ksp value among the given options. Ksp, or the solubility product constant, is the equilibrium constant for the dissolution of a sparingly soluble compound in a solution. It represents the maximum amount of solute that may be dissolved in a solvent at equilibrium under given conditions.AgBr, AgI, and AgCl are all sparingly soluble in water.

They all have small solubility product constants, indicating that they dissolve very little in water at equilibrium. AgCl has the greatest molar solubility among the three options, according to the given Ksp values. Its solubility product constant is 1.8 x 10-10, which is much greater than those of AgBr and AgI. Therefore, AgCl is the compound with the greatest molar solubility in water without any calculation.In summary, among the given options, AgCl has the greatest molar solubility in water without any calculation.

More on molar solubility: https://brainly.com/question/7141822

#SPJ11

The proportional equation that matches the context of a 33-inch candle burning down in 12 hours is b = 2.75t.

A candle that is 33 inches long is called a 33-inch candle. Candles are a popular decorative item that is commonly used for lighting, as decoration for weddings, and parties, or to create an aromatic atmosphere. B represents the length of the candle that has burned away at any time given in hours, t.

To find the proportional equation for b in terms of t that matches the context of a 33-inch candle burning down in 12 hours, the following steps should be followed:

Identify the given informationThe length of the candle (l) = 33 inchesThe time taken for the candle to burn down (t) = 12 hours

Determine the rate of burning The rate of burning of the candle is given by l/t. Therefore, the rate of burning = 33/12 = 2.75 inches per hour.

The proportional equation for b in terms of t is given by b = rt where r is the rate of burning. Therefore, b = 2.75t.

To know more about proportional equation:https://brainly.com/question/21749206

#SPJ11

Answer: The model star/planet would have to be 1,000 km away from the next closest star.

Explanation:
We need to find out the distance required for the distances in the system to be in scale.

Let's use the proportion to solve the problem:

1 m/4 × 10⁷ km = x/4 × 10¹³ km

Where x is the distance required for the distances in the system to be in scale.

Cross-multiply: 4 × 10¹³ km × 1 m = 4 × 10⁷ km × x

Simplify: 4 × 10¹³ m = 4 × 10⁷ x

Divide both sides by 4 × 10⁷ :1 × 10⁶ = x

Therefore, the distance required for the distances in the system to be in scale is 1 × 10⁶ m or 1,000 km.

So the model star/planet would have to be 1,000 km away from the next closest star.

Learn more about distance here

https://brainly.com/question/26550516

#SPJ11

The bungee jumper falls at a speed of approximately 17.67 meters per second.

Kinetic energy is simply a form of energy a particle or object possesses due to its motion.

It is expressed as;

K = (1/2)mv²

Where m is mass of the object and v is its velocity.

We know that the kinetic energy of the bungee jumper is 7.8 kJ and their mass is 50 kg.

Substituting these values into the equation gives:

K = (1/2)mv²

7.8 kJ = (1/2) × 50 kg ×  v²

Convert from kiloJoule to Joule

7.8 kJ = (7.8 × 1000 ) = 7800J

Simplifying:

7800J = (1/2) × 50 kg ×  v²

7800 kgm²/s² = (1/2) × 50 kg ×  v²

7800 kgm²/s² = 25 kg ×  v²

v² =  7800 kgm²/s² ÷ 25kg

v² =  312 m²/s²

Taking the square root of both sides:

v =  √( 312 m²/s² )

v = 17.67 m/s

Therefore, the fall speed is 17.67 m/s.

Learn more about kinetic energy here: brainly.com/question/12669551

#SPJ1

The minimum radius of the circle made by the jet pilot in the vertical loop is 2773.3 meters.

To find the minimum radius of the circle made by the jet pilot in the vertical loop, we need to use the formula for centripetal force as follows:

F = m * v² / r

where

The jet pilot is moving at a speed of 840 km/h which is equivalent to 840/3.6 = 233.3 m/s.

Let's assume the mass of the aircraft is 5000 kg.The centripetal force in this case is given by:

F = m * v² / rF = 5000 * (233.3)² / rF = 5000 * 54388.89 / rF = 271,944,450 / rAt the lowest point of the loop, the pilot experiences an apparent weight equal to twice the force due to gravity. This means that the net force experienced by the pilot is 2F = 2 * 271,944,450 / r. This net force is given by the difference between the centrifugal force and the gravitational force. Since the centrifugal force is equal to the centripetal force, we have:

F = m * g

where

Since the apparent weight is twice the actual weight, we have:

2m * g = F2 * m * g = m * v² / r2 * 9.81 = 54388.89 / r2 * r = 54388.89 / 19.62r = 2773.3 m

Therefore, the minimum radius of the circle made by the jet pilot in the vertical loop is 2773.3 meters.

Learn more about minimum radius: https://brainly.com/question/18687676

#SPJ11

According to the strength of the intermolecular forces, the hypothetical gases can be ordered as follows: Gas 3 > Gas 2 > Gas 1 > Gas 4.

The strength of intermolecular forces in gases can be estimated by analyzing their van der Waals constants, which take into account the size and polarizability of the molecules. A higher value of the van der Waals constant indicates stronger intermolecular forces.

Based on the given van der Waals constants, we can rank the hypothetical gases in order of decreasing strength of intermolecular forces as follows:

Gas 3 > Gas 2 > Gas 1 > Gas 4

Gas 3 has the highest van der Waals constant (a = 2.31 L/mol), indicating the strongest intermolecular forces, while Gas 4 has the lowest van der Waals constant (a = 4.05 L/mol), indicating the weakest intermolecular forces. Gas 2 and Gas 1 have intermediate values of van der Waals constants, with Gas 2 having a higher value than Gas 1, indicating stronger intermolecular forces.

Therefore, the hypothetical gases can be ranked in order of decreasing strength of intermolecular forces as Gas 3 > Gas 2 > Gas 1 > Gas 4.

To learn more about hypothetical gases refer to:

brainly.com/question/14601208

#SPJ4

Answer:

An upper fixed point calibration in a thermometer involves establishing a reference point at the highest temperature that the thermometer can measure accurately. This reference point is typically defined by the boiling point of a pure substance at a specific atmospheric pressure, such as water at standard atmospheric pressure (100°C or 212°F).

To calibrate the thermometer's upper fixed point, the thermometer is first placed in a container of boiling water and allowed to reach thermal equilibrium with the water. The thermometer's reading is then compared to the known boiling point of the substance at that pressure, and any differences are noted. If the thermometer reads higher or lower than the expected boiling point, the thermometer can be adjusted or calibrated accordingly to ensure that it provides accurate temperature readings.

It's important to note that the calibration of a thermometer's upper fixed point should be performed under controlled conditions, as variations in pressure or impurities in the substance being used to establish the reference point can affect the accuracy of the calibration. Additionally, regular recalibration may be necessary to ensure continued accuracy of the thermometer.

Explanation:

Unproven theories ultimately cannot be regarded as scientific facts or principles and are not generally recognised by the scientific community.

A well-supported explanation of a natural occurrence in science that has passed rigorous examination and is backed by empirical data is referred to as a theory. A hypothesis, however, cannot be regarded as a scientific fact or principle if it is not backed up by empirical data or if it has not undergone extensive testing and verification. The scientific community frequently rejects unproven notions with scant empirical backing and may even label them as pseudoscientific or non-scientific. This is so that scientific theories and findings may be evaluated and verified frequently. Science does this by using evidence-based reasoning and critical thinking. Unproven theories are therefore eventually not regarded as being a part of the corpus of scientific knowledge.

learn more about theories here:

https://brainly.com/question/1759635

#SPJ4

A 5 mm diameter, 50 mm long glass tube filled with water is rotated at 1000 rpm. The pressure at point A is 24.525 Pa.

The pressure at point A in a 5 mm diameter, 50 mm long glass tube filled with water when rotated at 1000 rpm can be calculated using the equation P = ρgr, where ρ is the density of the water, g is the acceleration due to gravity, and r is the radius of the tube.

Since the tube is 5 mm in diameter, the radius is 2.5 mm. The density of water is 1000 kg/m3 and the acceleration due to gravity is 9.81 m/s2. Therefore, the pressure at point A can be calculated as follows:

P = 1000 * 9.81 * 2.5 * 10-3 = 24.525 Pa

Therefore, the pressure at point A in a 5 mm diameter, 50 mm long glass tube filled with water when rotated at 1000 rpm is 24.525 Pa.

It is important to note that the pressure at point A will depend on the density of the fluid, the acceleration due to gravity, and the radius of the tube. As such, the pressure can be different for other fluids and for tubes with different radii.

For more such questions on Pressure.

https://brainly.com/question/15856309#

#SPJ11

The work done on the saw by the force if the displacement is along the straight-line y = x that connects these two points is -640.0 J.

To calculate the work done on the saw by the force as it moves along the straight-line y = x that connects the two points, we need to first find the displacement vector and then use it to calculate the work done.

The displacement vector from the origin to point C is given by:

r = (4.0 m) i + (4.0 m) j

The force acting on the saw is given by:

F = -kxy² j = -2.50 (N m³) (x) (y²) j

Since it is moving along the straight-line y = x, we can substitute x = y into the expression for F:

F = -2.50 (N m³) (x) (y²) j = -2.50 (N m³) (y³) j

Substituting x = y = 4.0 m:

F = -2.50 (N m³) (4.0 m)³ j = -160.0 j N

The work done by the force is given by the dot product of the force and displacement vectors:

W = F · r = (-160.0 N j) · (4.0 m i + 4.0 m j)

W = (-160.0 N) (4.0 m cos(45°))

W = -640.0 J

Therefore, the work done on the saw by the force as it moves along the straight-line y = x that connects the two points is -640.0 J.

Find out more on Cartesian system here: https://brainly.com/question/4726772

#SPJ1

The real truth is that there's always some friction, friction robs kinetic energy whenever he's moving, so eventually he stops going up and down.  Then he has to put some muscle energy into it to go some more.

Friction is a force that opposes the relative motion or attempts at motion between two surfaces in contact. It is the reason why we feel resistance when we try to slide an object across a surface or why it takes effort to walk or run. Friction can occur between solids, liquids, and gases, although it is most commonly observed in solids.

The force of friction arises from the interactions between the microscopic irregularities on the surfaces in contact. As two surfaces slide past each other, the irregularities interlock and resist further motion. The greater the force pressing the surfaces together, the greater the friction force. Friction is a fundamental force of nature that has both positive and negative effects.

To learn more about Friction visit here:

brainly.com/question/13000653

#SPJ4

Answer:

It blocks some light, but not all.

Explanation:

The point of polarization is to get the light to travel in a single plane. The light waves occur in a single plane. The direction of the vibration of the waves is the same. With two polarized filters, it is possible to block out nearly all the light.

The parametric equations that describe the motion of cars A and B while Car A traveling north at 70 mph and car B is traveling west at 50 mph and they both are heading toward the same intersection :

Car A: x = -70t + 5, y = 0Car B: x = 6 - 50t, y = 0

So, Option C is the right answer.

According to the problem,Car A is moving northwards while car B is moving westwards with the speeds of 70 mph and 50 mph respectively. The cars are heading towards the same intersection.

Car A is 5 miles from the intersection and Car B is 6 miles from the intersection.

Using the equation of motion in two dimensions, the positions of cars A and B can be described in terms of their distances from the intersection and the time elapsed as:

x = distance traveled in x direction, y = distance traveled in y direction

Car A: Initial distance from intersection = 5 miles, Speed = 70 mph = (70/60)mph = (7/6)miles per minute. Time elapsed from start of the motion = t minute

Parametric equation of motion for Car A = (x, y) = (-70t+5,0)

Car B: Initial distance from intersection = 6 miles, Speed = 50 mph = (50/60)mph = (5/6)miles per minute. Time elapsed from start of the motion = t minute

Parametric equation of motion for Car B = (x, y) = (6-50t,0)

Therefore, the correct option is C) Car A: x = -70t + 5, y = 0; Car B: x = 6 - 50t, y = 0.

"equation of motion", https://brainly.com/question/31130930

#SPJ11

Answer: Telephone

Explanation:

The technological improvement that allowed more goods to be produced at one time in the 1920s was the development and widespread use of assembly line production. This was pioneered by companies such as Ford Motor Company, which introduced the assembly line to its automobile factories. The assembly line method allowed for the mass production of standardized products using specialized machines and workers performing specific tasks. By breaking down the manufacturing process into smaller, simpler tasks, and optimizing the movement of workers and materials, the assembly line significantly increased production efficiency and output. This led to the growth of mass production industries, increased affordability of goods, and a significant shift in the nature of work in the 20th century.