Four protons (each with mass 1.7 10-27 kg and charge 1.6 10-19 C) are initially held at the corners of a square that is 4.9 10-9 m on a side. They are then released from rest. What is the speed of each proton when the protons are very far apart?

The angular acceleration of the blades  is 5.897 rad/s². It can be calculated using the formula α as the ratio of torque to moment of Inertia.

The torque is a rotational or twisting force. Angular acceleration is the rate at which the angular velocity of an object changes, measured in radians per second squared (rad/s²).

Given the torque and moment of inertia, we may utilize the following formula to find the angular acceleration of the blades:

[tex]\alpha= \dfrac{Torque}{Moment \; of \; inertia}\\\alpha= \dfrac{\tau}{I}[/tex]

where τ is the torque in newton-meters (N-m),I is the moment of inertia in kg-m², α is the angular acceleration in radians per second squared (rad/s²).

Rearranging the formula to solve for α gives:

[tex]\alpha=2.3/0.39\\=5.897 rad/s^2[/tex]

Therefore, the angular acceleration of the blades is 5.897 rad/s².

For further information about angular acceleration click on below link:

https://brainly.com/question/30238727

#SPJ11

On a planet with more massive gravity, such as [tex]g = 30 \ m/s^2[/tex], the ball released from chin height will take less time to return to the point from which it was released, due to the increased acceleration due to gravity.

It will take less time to return to the point from which it was released. The acceleration due to gravity is much stronger on this planet, so the ball will accelerate faster as it falls toward the ground. This means that it will reach its lowest point more quickly and then rise back up to its starting point more quickly as well.

Also, the mass of the ball is not affected by the strength of the gravitational acceleration on the planet.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11

Answer:

Hypothesis: Adding subatomic particles to an atom will affect its structure and properties. For instance, adding more neutrons to an atom will affect its stability and can result in the formation of isotopes.

The hypothesis is correct. Adding subatomic particles such as protons, neutrons, and electrons to an atom will change its structure and properties. The number of protons determines the atomic number and the identity of the element. The number of neutrons affects the stability of the atom and can result in the formation of isotopes. Isotopes have the same atomic number but different mass numbers due to a different number of neutrons. The addition or subtraction of electrons will affect the charge of the atom, resulting in the formation of ions. Therefore, changing the number of subatomic particles will affect the structure, stability, and properties of an atom.

Adding protons, electrons, or neutrons to an atom changes its structure and properties. Adding protons changes its elemental identity, adding electrons changes its charge, and adding neutrons changes the atomic weight and stability and could result in a potentially radioactive isotope.

Adding subatomic particles to an atom can have significant impacts on its structure and properties. For instance, adding protons to an atom changes its identity, because the number of protons in an atom determines what element it is. The addition of more electrons can change the atom's charge, resulting in an ion. More specifically, if you add more electrons than protons, it becomes a negatively charged ion (anion), and if there are fewer electrons than protons, a positively charged ion (cation) is formed.

Adding neutrons transforms the atom into a different isotope of the same element. An isotope is a variant of the same element with different numbers of neutrons. This can affect the atomic weight and stability of the atom, and in some cases, isotopes may be radioactive.

https://brainly.com/question/32192242

#SPJ2

The frequency that the bad guy hear is 12000 hz when the police car is moving with speed of 80m/s.

For more information on doppler effect kindly visit to

https://brainly.com/question/15318474

#SPJ1

In the context of the motor control process related to the speed-accuracy trade-off, the initiation phase of movement includes the beginning of limb movement in the direction of a target.

Motor control is the ability to regulate and coordinate motor skills to achieve a desired outcome. The central nervous system (CNS) is in charge of regulating these skills. The CNS is divided into two parts: the peripheral nervous system (PNS) and the central nervous system (CNS). Motor skills are regulated by both parts of the nervous system. The CNS, on the other hand, is more involved in higher-level motor control.

A motor control system can be divided into three stages: planning, initiation, and execution. When the central nervous system processes the desired movement, it activates the motor program in the initiation stage, which produces the motor command sent to the muscles. Movement is initiated by the initiation stage. Following that, the movement is executed to meet the task's requirements. The motor program adjusts movement by making corrections based on previous trials and feedback. Therefore, the initiation phase is critical in the context of the motor control process related to the speed-accuracy trade-off.

Learn more about Motor control here:

https://brainly.com/question/29769703
#SPJ11

Answer:

Work is negative on the way up and positive on the way down.

Explanation:

Work is positive if displacement and the force are in the same direction.

Work is negative if displacement and the force are in opposite directions.

(Note that work is zero if displacement is perpendicular to the force.)

In this question, the gravity on the object points downwards at all times.

On the way up, the position of the object is above where it was launched. Hence, displacement would point upwards.

Since the direction of gravity is opposite to that of displacement on the way up, the work on the object would be negative.

In contrast, displacement of the object points downward on the way down. Since displacement is in the same direction as the force of gravity, the work on the object would be positive.

As moist air rises in the atmosphere, it cools and expands, which causes the moisture in the air to condense into clouds and precipitation.

A moist air mass is a volume of air with a high water vapor concentration. It is usually humid and can be found in tropical regions, where the temperature is high and the air is often saturated with water vapor. When this air mass rises in the atmosphere, it cools, and the water vapor begins to condense into clouds.

As the moist air mass rises in the atmosphere, it cools due to a decrease in pressure. The cooling causes the water vapor in the air to condense into clouds, and the clouds can then produce precipitation. The amount of precipitation that is produced will depend on factors such as the temperature, humidity, and the amount of moisture in the air mass.

For more question on precipitation click on

https://brainly.com/question/27695504

#SPJ11

The speed of Riley relative to the water is 1.7 m/s. and the speed of canoe relative to the water is 0 m/s.

The equation needed to solve the problem is the following:

Final Velocity = Initial Velocity + (Acceleration × Time)

The steps to solve for speed of Riley are the following:

Mass of Riley = 62 kg

Mass of canoe = 21 kg

Speed of leap relative to the boat = 1.7 m/s

By using the equation for conservation of momentum (also known as the center of mass formula):

m₁v₁ + m₂v₂ = (m₁ + m₂)vf

Solve for the unknown variable: vf = (m₁v₁ + m₂v₂) / (m₁ + m₂)

Plugging in the values given, you get: vf = (62 kg × 1.7 m/s) / (62 kg + 21 kg) = 1.2 m/s

Therefore, Riley is moving at 1.2 m/s relative to the water.

Velocity of the canoe relative to the water can be determined by using the equation for conservation of momentum (also known as the center of mass formula):

m₁v₁ + m₂v₂ = (m₁ + m₂)vf

v₂ = [(m₁ + m₂)vf - m₁v₂] / m₂

Plugging in the values given, you get: v₂ = [(62 kg + 21 kg) × 1.2 m/s - 62 kg  × 1.7 m/s] / 21 kg = 0 m/s

Therefore, the canoe is not moving relative to the water.

Learn more about Relative speed here:

https://brainly.com/question/14362959

#SPJ11

The factor that does not determine how much gravitational potential energy is in an object-earth system is the object's mass.

An object-earth system is a system in which an object interacts with the earth by exerting a force of attraction. The object's energy is derived from the work done by gravitational forces when the object is moved away from the earth's surface.

An object in an object-earth system's gravitational potential energy is the work done by gravitational forces on the object when it is moved from a lower position to a higher one in the object-earth system. The factor that does not determine how much gravitational potential energy is in an object-earth system is the object's mass. The gravitational potential energy of an object in the earth-object system is determined by the distance between the object and the earth's surface. The gravitational potential energy of an object increases as the distance between it and the earth's surface increases.

Learn more about the gravitational potential at brainly.com/question/19768887

#SPJ11

This person's relative VO2 max at sea level is approximately 53.43337534 ml/min/kg.

The VO2 max of the client at the top of Everest after acclimation is approximately 26.71668767 ml/min/kg.

1) VO2 max is the maximum oxygen uptake capacity of an individual. It is measured in liters per minute (L/min).

Relative VO2 max is the VO2 max expressed in milliliters per minute per kilogram of body weight. It is calculated as:

Relative VO2 max = VO2 max (in ml/min) / Body weight (in kg)

Bodyweight = 198 lb

Let's convert body weight into kilograms as: 1 lb = 0.453592 kg198 lb = 198 × 0.453592 = 89.811376 kg

Relative VO2 max at sea level (in ml/min/kg) = VO2 max (in ml/min) / Body weight (in kg)VO2 max = 4.8 L/min = 4800 ml/min

Relative VO2 max = 4800 ml/min / 89.811376 kg

Relative VO2 max = 53.43337534 ml/min/kg (approx)

2) The decrease in VO2 max that occurs on the summit of Mount Everest vs. that at sea level is approximately 70%. It means the VO2 max of an individual at the summit of Mount Everest is 30% of their VO2 max at sea level.

VO2 max at the top of Everest after acclimation = Relative VO2 max at sea level * (30 / 100)

Since the question does not provide enough information about the acclimation of the client, we can assume a rough estimate of the VO2 max at the top of Everest after acclimation. For example, if we assume that acclimation can help to maintain at least 50% of VO2 max at the top of Everest, then:

VO2 max at the top of Everest after acclimation = 53.43337534 ml/min/kg * (50 / 100)

VO2 max at the top of Everest after acclimation = 26.71668767 ml/min/kg (approx)

To learn more about "relative vO2 max", visit: https://brainly.com/question/31149312

#SPJ11

The meaning of f∝e is that the extension is directly proportional to the force applied of a particular object from Hooke's law.

The extension for a particular spring and other elastic items is inversely proportional to the applied force. For instance, the extension doubles if the force does. This is effective up until the proportionality limit is reached.

According to Robert Hooke's law of elasticity, which holds true for relatively minor deformations of an item, the displacement or amount of the deformation is directly proportional to the deforming force or load. Hooke's law was first discovered in 1660.

Learn more about forces at:

https://brainly.com/question/25239010

#SPJ1

complete question :

What does this mean f∝e?

There is continuity in the flow as the velocity distribution is constant in the x-direction, but it can vary in the y-direction.The Navier-Stokes equations are thus valid. Finally, p(x,y)p(x,y) if the pressure at the origin is p0p0​ is $$ p(x,y) = p_0 - \rho V^2 \frac{xy}{h^2} $$.

(a) Check continuity:Let v (x) be the velocity distribution. By the equation of continuity, we have the following:$$ \frac{d}{dx}v(x) =0 $$Thus, the velocity distribution is constant in the x-direction, but it can vary in the y-direction. Therefore, there is continuity in the flow.

(b)The Navier-Stokes equations are valid. (c) write down the Navier-Stokes equations:

$$ \frac{\partial v}{\partial t} + v \frac{\partial v}{\partial x} + w \frac{\partial v}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial x} + g_x $$$$ \frac{\partial w}{\partial t} + v \frac{\partial w}{\partial x} + w \frac{\partial w}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial y} + g_y $$.Since there is no gravity, we have that g x = g y = 0. Then, we can rewrite the equations as follows:

$$ \frac{\partial v}{\partial t} + v \frac{\partial v}{\partial x} + w \frac{\partial v}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial x} $$$$ \frac{\partial w}{\partial t} + v \frac{\partial w}{\partial x} + w \frac{\partial w}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial y} $$We also have the following:$$ \frac{\partial v}{\partial x} + \frac{\partial w}{\partial y} = 0 $$.From the velocity distribution, we have that:$$ v(x,y) = - \frac{V}{h}y $$where V is the maximum velocity at the centerline, and h is the half-width of the channel.

Then, we can write the pressure distribution as follows:$$ \frac{\partial p}{\partial x} = - \rho V^2 \frac{y}{h^2} $$Integrating with respect to x, we obtain:$$ p(x,y) = p_0 - \rho V^2 \frac{xy}{h^2} $$where p 0 is the pressure at the origin.

More on velocity distribution: https://brainly.com/question/29991330

#SPJ11

The graph would look like a series of two linear slopes, one going up and one going down.

A linear slope, also known as a straight-line slope, refers to the rate of change of a linear function, which is represented by a straight line on a graph. In mathematical terms, the slope is defined as the ratio of the change in the vertical coordinate (y) to the change in the horizontal coordinate (x) between any two points on the line.

The slope of a linear function is constant throughout the line, meaning that the rate of change remains the same regardless of the position on the line. Linear slopes are used in a variety of mathematical applications, including geometry, physics, engineering, and economics, among others. They are particularly useful for modeling relationships between two variables, such as distance and time, or price and quantity.

To learn more about Linear slopes visit here:

brainly.com/question/30352092

#SPJ4

The distance from James's head to his 8-foot long shadow is 8 feet.

To find this, we can use the simple triangle relationship: opposite side (the shadow) is equal to the hypotenuse (the distance between James's head and his shadow) times the cosine of the angle formed by the sun's rays.

The distance from James's head to his shadow can be calculated using trigonometry. The tangent function can be used for this purpose.

To calculate the distance from James's head to his shadow, follow these steps:

Firstly, draw a right triangle with one of its angles adjacent to James's head and the other adjacent to the base of the shadow. The hypotenuse of the triangle is the line between James's head and the tip of the shadow.

Let x be the distance from James's head to the base of the shadow. The hypotenuse is the square root of (x^2 + 8^2).

Use the tangent function to find the value of x. tan(angle) = opposite/adjacent. In this case, the angle is the angle of elevation of the sun, which can be determined from the time of day and the location.

If the angle is not known, it can be assumed to be 45 degrees. tan(45) = opposite/adjacent.

The opposite side is 8, so: x = 8/tan(45) = 8/1 = 8 feet.

Therefore, the distance from James's head to his shadow is 8 feet.

To know more about trigonometry, refer here:

https://brainly.com/question/26719838#

#SPJ11

R = R1 + R2 + R3    equivalent resistance of 3 resistors in series

I = V / R

In computing the standard error of the mean, the finite population correction factor is used when the group of answer choices n/n > 0.05. Hence, the correct answer is option A.

The standard error of the mean (SEM) is a statistic that measures the accuracy with which a sample represents the population mean. It indicates how precisely the sample estimate of the mean varies from the real mean of the population.The formula for SEM is as follows:SEM = s / sqrt (n), where s is the sample standard deviation and n is the sample size. When the sample size is large, it is common to assume that the population standard deviation σ is unknown and is therefore estimated using the sample standard deviation s. We do this by dividing s by the square root of the sample size.

When the sample size is a substantial portion of the population, the finite population correction factor (FPC) must be applied to the SEM formula to account for the sample size's effect on the standard error. FPC is the ratio of the population size minus the sample size to the population size minus one, raised to the power of 0.5.In summary, the finite population correction factor is utilized when the ratio n/N is greater than 0.05. If the ratio is less than or equal to 0.05, the FPC can be ignored.

More on standard error: https://brainly.com/question/16766208

#SPJ11

The correct answer is B. At the bottom of the Ferris wheel, the person's apparent weight is at its maximum.

How to find apparent weight?

The apparent weight of a person on a Ferris wheel is due to the combination of two forces acting on them: the gravitational force and the centrifugal force. As the Ferris wheel rotates, the direction and magnitude of the centrifugal force change, causing the apparent weight of the person to vary.

At the top of the Ferris wheel, the person's apparent weight is at its minimum because the centrifugal force is directed downwards, opposing the gravitational force. At the bottom of the Ferris wheel, the person's apparent weight is at its maximum because the centrifugal force is directed upwards, adding to the gravitational force.

Halfway up, going down, the person's apparent weight is less than their true weight, but more than it is at the top because the centrifugal force is still directed downwards, but its magnitude is decreasing. Similarly, halfway up, going up, the person's apparent weight is less than their true weight, but more than it is at the bottom because the centrifugal force is still directed upwards, but its magnitude is decreasing.

Therefore, the correct answer is B. At the bottom of the Ferris wheel, the person's apparent weight is at its maximum.

To know more about weight visit:-

https://brainly.com/question/86444

#SPJ1

The function f(x) = x, where 0 x 2, has the following Fourier series: Given that f(x) has an odd period of 2, we may express its Fourier series as follows: F(x) = A0 + [n=1 to] Ancos (n/x) plus bnsin (n/x).

Since f(x) is an odd function, a0 = 0. We may apply the following formulae to determine the Fourier coefficients: a = (2/1) f(x)cos(nx/1)[0 to 1] dx Bn = (2/1) f(x)sin(nx/1)[0 to 1] dx We may determine the coefficients using the following formulas: an is equal to (2/1) [0 to 1] x*cos(nx/1) dx. Bn is equal to (2/1), [0 to 1]x*sin(nx/1)dx. By integrating in pieces, we obtain: a = (2/π^2) [(1-(-1)^n)/(n^2)] bn = (2/π) [(1-(-1)^n)/(n)] The Fourier series of f(x) = x, where 0 x  its Fourier series as follows: F(x) = A0 + [n=1 to] Ancos (n/x) plus bnsin (n/x).2, is as follows: f(x) = Σ(n=1 to ∞) [(2/) (1-(-1)n)/(n))*sin(nx/1)].

learn more about Fourier series   here:

https://brainly.com/question/29672996

#SPJ4

The equivalent resistance of this circuit is 4.62 Ω.

What is resistors?

A resistor is an electronic component that is used to resist or limit the flow of electric current through a circuit. It is a passive component, which means it does not require any external power source to function.

Resistors are typically made of materials that have a high resistance to the flow of electric current, such as carbon, metal, or metal oxide

When resistors are connected in parallel, the total resistance can be calculated using the following formula:

1/Req = 1/R1 + 1/R2 + 1/R3 + ...

where Req is the equivalent resistance and R1, R2, R3, etc. are the individual resistances.

Applying this formula to the given circuit, we get:

1/Req = 1/10 + 1/15 + 1/20

1/Req = 0.1 + 0.0667 + 0.05

1/Req = 0.2167

Taking the reciprocal of both sides gives:

Req = 1/0.2167

Req = 4.62 Ω

Therefore, the equivalent resistance of this circuit is 4.62 Ω.

To know more about circuit visit :-

https://brainly.com/question/2969220

#SPJ1

AgBr has the greatest molar solubility in water since its Ksp ([tex]5.0\times10^{-13}[/tex]) is the highest of the three given compounds.

The solubility of a compound is inversely related to its Ksp; a higher Ksp indicates a greater solubility.

The molar solubility of a compound in water depends on its solubility product constant (Ksp). The higher the Ksp value, the more soluble the compound is in water.

Comparing the Ksp values of the given compounds, we see that AgBr has the highest Ksp ([tex]5.0\times10^{-13}[/tex]), followed by AgCl ([tex]1.8\times10^{-10}[/tex]), and AgI has the lowest Ksp ([tex]8.3\times10^{-17}[/tex]).

Therefore, based on the Ksp values, we can predict that AgBr will have the greatest molar solubility in the water among the given compounds.

Learn more about solubility:

https://brainly.com/question/24057916

#SPJ11

The final velocity of the skater (with the child on their shoulders) is 3.08 m/s.

A skater of mass 70.0 kg initially moves in a straight line at a speed of 4.80 m/s.

When the skater lifts a child of mass 39.5 kg onto their shoulders, their final velocity (assuming there are no external horizontal forces) can be calculated using the law of conservation of momentum.

Momentum is defined as the product of mass and velocity. Therefore, the final momentum of the skater and child can be expressed as:

Final Momentum = (70.0 kg x 4.80 m/s) + (39.5 kg x 0 m/s) = 336 kg m/s

To find the final velocity, we must first find the total mass of the skater and child:

Total Mass = 70.0 kg + 39.5 kg = 109.5 kg

Using the law of conservation of momentum and the total mass, the final velocity of the skater can be expressed as:

Final Velocity = Final Momentum / Total Mass = 336 kg m/s / 109.5 kg = 3.08 m/s

To know more about "final velocity" refer here:

https://brainly.com/question/9163788#

#SPJ11

The magnetic field inside an infinite solenoid is given by the expression:

B = μ0N/L where μ0 is the permeability of free space, N is the number of turns per unit length, and L is the length of the solenoid.

The magnetic field inside a toroid is given by the expression:

B = μ0NI

where μ0 is the permeability of free space, N is the number of turns per unit length, and I is the current flowing through the toroid.

To show that the expression for the magnetic field of a toroid reduces to that for the field of an infinite solenoid in the limit that the central radius goes to infinity, we can consider a toroid with an infinitely large central radius and a circular cross-section of radius R. In this case, the number of turns per unit length is N = I/2πR and the current through the toroid is I = 2πRN. Substituting these expressions into the equation for B gives:

B = μ0NI

B = μ0N(2πRN)

B = 2πμ0NR2

B = 2πμ0N2R2

Assuming that the length of the solenoid is equal to its cross-sectional radius, L = R, then the equation for B reduces to:

B = 2πμ0N2R

B = μ0N/L

Therefore, in the limit that the central radius of a toroid goes to infinity, the expression for the magnetic field inside a toroid reduces to the expression for the magnetic field inside an infinite solenoid.

To know more about the magnetic field:

https://brainly.com/question/11462606

#SPJ11

At t = 10.0 s, the height of the rocket above the surface of the earth is 200 m. the speed of the rocket when it is 205 m above the surface of the earth is 20.64 m/s.

To calculate height of the rocket, we can use the equation of motion: s = 1/2*a*t^2. Therefore, the height of the rocket is: s = 1/2*2.90m/s^2*(10.0s)^2 = 200 m

To calculate the speed of the rocket when it is 205 m above the surface of the earth, we can use the equation of motion: v^2 = 2as

Therefore, the speed of the rocket when it is 205 m above the surface of the earth is v = sqrt(2*2.90m/s^2*205m) = 20.64 m/s.

Learn more about average speed: brainly.com/question/6504879

#SPJ11

3.) the total momentum change per unit of time, and the total momentum change are both important in determining the amount of damage an object sustains in a collision.

The amount of damage an object receives in a collision depends on both the overall momentum change and the momentum change per unit of time. The mass and velocity of the objects colliding determine the total momentum change, which is a measure of the force of impact. The impulse, also known as the change in momentum per unit of time, is equally significant. This gauges how long an impact lasts and how the force is applied throughout that time. Impacts that last longer and exert less force can cause less harm than impacts that last less time and exert more force. The specific factors that contribute to damage will depend on the details of the collision, such as the speed, mass, and shape of the objects involved.

learn more about momentum change here:

https://brainly.com/question/30157362

#SPJ4

A 1 kg box falls two metres from a shelf and lands on the ground after 0.021 seconds. The box impacted the ground with a force of around 524.7 N.

The box impacted the ground with a force of around 524.7 N.

Explanation: We can determine the force using the equation F = m * (v/t), where m is the box's mass, v is the velocity change (which is the ultimate velocity because the box starts at rest and comes to a halt), and t is the time it takes for the box to stop.

Given that the box falls 2 metres and its terminal velocity is 0 m/s, v = 2 m/s.

524.7 N is equal to F = 1.1 kg * (2 m/s / 0.021 s).

learn more about force here:

https://brainly.com/question/13191643

#SPJ4

The speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.784 m/s.

The speed of the block when it has moved a distance of 0.0200 m from its initial position when it has been released from rest is given by v. The force constant of the horizontal spring is given by k. The block has a mass of m. The distance the spring has been compressed is given by d. The coefficient of kinetic friction between the floor and the block is given by μk.

It is asked to determine the speed of the block. There are different ways to approach this problem, but one of the most common ways is to consider the conservation of energy principle. This principle states that the total energy of a system remains constant if no external work is done on it. In other words, the initial energy of the system is equal to the final energy of the system.

Using this principle, we can write :

Initial energy = final energy

1/2 k x² + m g d = 1/2 m v² + m g d + f k d

where x = initial compression of the spring (0.0320 m), d = compression of the spring at the end (0.0120 m), v = speed of the block f, k = kinetic friction force, mg = weight of the block, k = spring constant of the horizontal spring. By solving this equation for v, we get:

v = sqrt((k/m) x² + 2g(mu_k- d))

where:g = 9.81 m/s²

We can substitute the given values into this equation to get:

v = sqrt((800/2.35) x² + 2*9.81(0.35 - 0.012))v = 0.784 m/s

Therefore, the speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.784 m/s.

Learn more about friction and speed at:https://brainly.com/question/13009300

#SPJ11

When you are on the top floor of a building, your weight is the same as when you are on the ground floor.

The weight of an object is the measure of the force of gravity acting on the object. The weight of an object is proportional to its mass and the acceleration due to gravity acting on it. The mass of an object is the measure of the amount of matter it contains. The mass of an object is constant, whereas its weight varies with the acceleration due to gravity acting on it.

Since the acceleration due to gravity acting on an object near the surface of the Earth is almost constant, the weight of an object on the ground floor of a building is the same as its weight on the top floor of the same building. In other words, the weight of an object does not change with height as long as the object is at rest or moving with a constant velocity.

Learn more about Weight here:

https://brainly.com/question/10069252

#SPJ11

Astronomers prefer to use infrared telescopes on high-flying airplanes or on satellites in space because the atmosphere of the Earth blocks a significant amount of infrared light. By placing these telescopes in the sky or in space, astronomers can get a better view of infrared light from distant objects in the universe.

Airborne telescopes can offer temporary access to the observable range of the electromagnetic spectrum blocked by water vapor and ozone layer.The atmosphere filters out and absorbs some of the infrared light. The atmosphere consists of many layers. Infrared light does not get through the layer of ozone, water vapor, or carbon dioxide that makes up the lower part of the atmosphere. However, the higher atmosphere is transparent to infrared light. So, flying above this layer can give astronomers a much clearer and less obstructed view of the universe.

Satellites can offer a better view of the universe without interference from the Earth’s atmosphere. In space, the telescope is not hampered by the Earth's atmosphere. For example, the Hubble Space Telescope, which orbits about 570 km above Earth's surface, provides a clearer view of the universe in ultraviolet, visible, and near-infrared wavelengths than ground-based telescopes do. It has discovered galaxies, stars, and phenomena far beyond the reach of Earth-based telescopes.

They offer the possibility of carrying bigger and heavier instruments than a ground-based observatory.The weight of an airborne telescope is significantly reduced in comparison to a ground-based telescope because it is placed above the Earth’s atmosphere, and this has the advantage of allowing for more extensive equipment, including larger and heavier telescopes. Satellites have the same advantage as they are not limited by the size of the payload.

Airborne telescopes and satellites can observe celestial objects in the infrared spectrum.Infrared light is absorbed by the Earth's atmosphere. As a result, infrared telescopes that are placed on the ground will be less successful. As a result, astronomers prefer to place them on airborne telescopes and satellites, which are above the Earth's atmosphere. This makes it possible for infrared telescopes to examine the universe and make discoveries that would otherwise be impossible to observe from the ground.

More on astronomy: https://brainly.com/question/13047630

#SPJ11

Acceleration due to gravity is 9.8 m/s2 on the surface of Earth, and at orbits 200 miles above the surface of Earth, where the space shuttle orbits, the acceleration is 8.78 m/s².

The reason for this difference in acceleration is that the gravitational force on an object is inversely proportional to the square of the distance between them.

Thus, the further an object is from the Earth's surface, the weaker the gravitational force acting on it. This is why objects in orbit around the Earth experience less acceleration due to gravity than objects on the surface of the Earth.

To know more about gravitational force:

https://brainly.com/question/3009841

#SPJ11

Answer:

6° because some heat is released out of surrounding. if 100 over six which is equal to sixtenn point four