Compared to the alkali metals, the alkaline-earth metals have higher melting and boiling points and have a smaller atomic radius.
Alkaline-earth metals are found in second group of the periodic table and have two valence electrons in their outermost shell. They have a lower reactivity than alkali metals because their outermost electrons are held more tightly due to their higher nuclear charge. The smaller atomic radius of the alkaline-earth metals also contributes to their increased reactivity compared to larger alkali metals. They tend to form ionic compounds with nonmetals due to their tendency to lose their two outermost electrons. They are important elements in many applications, including production of steel, aluminum alloys, in the extraction of metals from their ores.
To know more about Alkaline-earth metals, here
brainly.com/question/12835232
#SPJ4
before you can find the mass, what do you need to know? b. turn on show molar mass. what is the molar mass of carbon? c. what do you think the mass of 2.000 moles of carbon will be?
The molar mass of carbon is 12.0107 g/mol. Therefore, the mass of 2.000 moles of carbon is 24.0214 grams.
To calculate the mass of a substance, one must know the substance's quantity or amount (in moles) as well as its molar mass. The amount can be represented using the symbol n and is typically measured in moles (mol).The molar mass (M) is defined as the mass of one mole of a substance and is expressed in grams per mole (g/mol). The molar mass of carbon is 12.01 g/mol, so one mole of carbon weighs 12.01 grams.
To determine the mass of a certain number of moles of a substance, we can use the following formula:
mass = n x MM
where: mass = the mass of the substance (in grams)
n = the amount of the substance (in moles)
MM = the molar mass of the substance (in g/mol)
So, for carbon, if we have 2.000 moles of the element, the mass would be:
mass = 2.000 mol x 12.01 g/mol = 24.02 g
Therefore, the mass of 2.000 moles of carbon would be 24.02 g.
To know more about Molar Mass refer here :
https://brainly.com/question/21334167
#SPJ11
Do you think the offspring of the hydra and the salamander are genetically identical or not genetically identical to the parents? Support your argument with evidence.
A tractor pulls a wagon at a constant velocity for 1500 m while exerting a force of 600 N
Calculate the work done (in joules). Show your work
Answer:
900000 joules (J).
Explanation:
The work done by a force on an object is given by the product of the force and the displacement of the object in the direction of the force. In this case, the force exerted by the tractor is 600 N, and the displacement of the wagon is 1500 m in the direction of the force.
Therefore, the work done by the tractor on the wagon is:
work = force x displacement x cos(theta)
where theta is the angle between the force and the displacement vectors. Since the force and displacement are in the same direction, theta is 0 degrees, and cos(theta) is equal to 1.
So, the work done by the tractor is:
work = 600 N x 1500 m x 1
= 900000 J
Therefore, the work done by the tractor on the wagon is 900000 joules (J).
a. Functional Group:
b. Longest Chain:
c. Branched Group Type and Location:
d. Full Name of Compound:
a. There is no functional group in 2-methylhexane as it is an alkane.
b. The longest chain in 2-methylhexane is a six-carbon chain.
c. The branched group is the methyl group (-CH3), which is attached to the second carbon atom of the longest chain.
d. The full name of the compound is 2-methylhexane.
What is functional group?A functional group is a specific group of atoms that give a molecule its characteristic chemical and physical properties and reactivity. Functional groups are responsible for the chemical behavior of a molecule and determine its chemical and physical properties, such as boiling point, melting point, solubility, acidity or basicity, and its chemical reactivity.
Functional groups are typically composed of a small number of atoms that are usually bound to a carbon atom or another element, such as nitrogen or oxygen. Some examples of common functional groups include hydroxyl (-OH), carbonyl (>C=O), amino (-NH2), carboxyl (-COOH), and phosphate (-PO4). The presence or absence of functional groups in a molecule plays a crucial role in determining its biological, chemical, and physical properties.
To know more about melting point, visit:
https://brainly.com/question/29578567
#SPJ1
Think about how you would expect the temperatures in the star to vary between each of the layers shown, and use this to sort the following elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
Helium - Carbon - Oxygen - Hydrogen - Neon - Sulfur
The correct order of the elements will be Hydrogen, Helium, Neon, Oxygen, Carbon, Sulfur.
What is nuclear fusion?
A reaction known as nuclear fusion occurs when two or more atomic nuclei fuse to create new atomic and subatomic particles. Energy is released or absorbed depending on how much mass there is between the reactants and products.
The temperature inside a star fluctuates depending on the layers in which nuclear fusion reactions occur. In this problem, students are asked to sort the given elements in order of increasing temperature at which they burn in a nuclear fusion reaction.
To do so, it is necessary to determine the order in which the layers of the star are located. This can be accomplished by considering the temperature required for nuclear fusion to take place in each layer. The following is a list of elements arranged in order of increasing temperature required for nuclear fusion:
Hydrogen - Helium - Neon - Oxygen - Carbon - Sulfur.
Learn more about nuclear fusion on:
https://brainly.com/question/17870368
#SPJ11
A: Branched Group Type and Location:
(Hint: There are two, but they are the same type)
b. Longest Chain:
c. Functional Group:
d. Full Name of Compound:
The longest chain is pentane
The functional group is alkene
The name of the compound would be based on the kinds of substituents present.
What are the types of branching in organic compounds?In organic chemistry, there are two main types of branching in organic compounds: chain branching and positional branching.
Chain branching: Chain branching occurs when a side chain (alkyl group) is attached to the main carbon chain of a molecule. This results in a change in the chemical and physical properties of the molecule, such as boiling point, melting point, and solubility. Examples of chain-branched compounds include isobutane (2-methylpropane), isopentane (2-methylbutane), and neopentane (2,2-dimethylpropane).
Positional branching: Positional branching occurs when a substituent is attached to a specific position on the main carbon chain of a molecule. This type of branching can occur in cyclic or acyclic molecules, and can have a significant impact on the properties and reactivity of the molecule. Examples of positional-branched compounds include tert-butyl alcohol (2-methyl-2-propanol), 1-chloro-3-methylbutane, and 2,4-dimethylhexane.
Learn more about organic compounds:https://brainly.com/question/5994723
#SPJ1
he structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbusterFDA-approved drug. Propose a synthesis of this compound using tryptophan as a startingmaterial.NHNN
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt.
The structure below is an inhibitor of the enzyme phosphodiesterase type 5 and a blockbuster FDA-approved drug. To propose a synthesis of this compound using tryptophan as a starting material, we need to understand the chemical structure of the compound.
The structure of the compound contains two nitrogen atoms, one hydrogen atom, and two nitrogen-hydrogen bonds (NHNN). The starting material, tryptophan, contains a ring structure with an indole group, two nitrogen atoms, and four carbon atoms.
A synthesis of the compound can begin by reacting the indole group of tryptophan with an alkyl halide to form a quaternary ammonium salt. This salt can then be reacted with a Lewis acid to form a substituted Indolium ion. The Indolium ion can be reacted with a nucleophile such as hydrazine to form an oxazolidinone intermediate.
Finally, a ring closure of the oxazolidinone intermediate can yield the desired compound.
Learn more about tryptophan https://brainly.com/question/15204421
#SPJ11
Explain two reasons why catholics believe prayer is important? (Include types of prayer) (4)
Answer:
Catholics believe prayer is important for several reasons. Firstly, prayer is a means of communicating with God and building a personal relationship with Him. Through prayer, Catholics seek guidance, forgiveness, and strength to face life's challenges. They believe that prayer can bring peace of mind, reduce anxiety, and provide comfort during difficult times.
Secondly, prayer is considered a powerful spiritual weapon that can change the course of events, and it is a way to participate in the work of God. Catholics practice different types of prayers, including adoration, confession, thanksgiving, and supplication. Adoration involves praising God for his goodness and greatness. Confession is acknowledging one's sins and asking for forgiveness. Thanksgiving is expressing gratitude for blessings and gifts. Supplication is asking for help or interceding for others. Catholics also practice contemplative prayer, which is a silent form of prayer where one seeks to connect with God through meditation and listening. Overall, for Catholics, prayer is a fundamental practice of their faith, and it helps them to live a more fulfilling and meaningful life.
Explanation:
Which hydrocarbon has all of its atoms in the same plane?A) C2H6B) CH4C) C2H4D) C3H4
The hydrocarbon that has all of its atoms in the same plane is C2H4. The correct answer is option: C .
This is because C2H4 has a planar structure due to its sp2 hybridization of carbon atoms, which allows the molecule to have a trigonal planar geometry. In contrast, C2H6, also known as ethane, has a tetrahedral shape due to the sp3 hybridization of its carbon atoms, which results in the atoms not being in the same plane. CH4, it has a similar tetrahedral shape for the same reason. C3H4, also known as propyne, has a linear shape due to the triple bond between the carbon atoms, but the atoms are not all in the same plane. Option C is correct.
To know more about hydrocarbon, here
brainly.com/question/17578846
#SPJ4
Which of the following incorrectly shows the bond polarity? Show the correct bond polarity for those that are incorrect.
a. δ+H—Fδ–
b. δ+Cl—Iδ–
c. δ+Si—Sδ–
d. δ+Br—Brδ–
e. δ+O—Pδ–
The following among the given five incorrectly shows the bond polarity: δ+Br—Brδ–.
A bond's polarity is determined by the difference in electronegativity between the two atoms in the bond. The covalent bond is non-polar if the atoms are similar and have identical electronegativities. A bond is polar if the atoms have a significant difference in electronegativities. A polar bond is a bond between two atoms with different electronegativities in which the electrons in the bond are not shared equally, resulting in unequal distribution of electrical charge.
The electrons are pulled closer to the more electronegative atom in a polar covalent bond, resulting in a partial negative charge (δ-) on one end and a partial positive charge (δ+) on the other end.The polarity of bonds is represented by symbols δ+ and δ−, which represent the relative positive and negative electrical charges on the atoms, respectively.The correct bond polarity is δ+Br—Brδ–
More on bond polarity: https://brainly.com/question/10777799
#SPJ11
Lead can be prepared from galena [lead(II) sulfide] by first roasting the galena in oxygen gas to form lead(II) oxide and sulfur dioxide. Heating the metal oxide with more galena forms the molten metal and more sulfur dioxide.
(a) Write a balanced equation for each step, including the state of each chemical.
(1)
(2)
(b) Write an overall balanced equation for the process, including the state of each chemical.
The answer of the following following questions are PbO(s) + PbS(s) → 2Pb(l) + SO2(g) and 2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)
What is chemical reaction ?
A chemical reaction is a process in which one or more substances (reactants) are transformed into new substances (products) by the breaking and formation of chemical bonds. During a chemical reaction, the arrangement of atoms in the reactants is changed to form different molecules or compounds.
In a chemical reaction, the reactants are transformed into products through the rearrangement of atoms, but the total number of atoms remains the same. This is known as the law of conservation of mass, which states that matter cannot be created or destroyed in a chemical reaction.
(a)
Step 1: Roasting of galena in oxygen gas:
PbS(s) + 3O2(g) → PbO(s) + 2SO2(g)
Step 2: Heating the metal oxide with more galena:
PbO(s) + PbS(s) → 2Pb(l) + SO2(g)
(b) Overall balanced equation for the process:
2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)
Note: The state of the reactants and products has been indicated in the equations, with (s) representing a solid, (g) representing a gas, and (l) representing a liquid.
To know more about reaction visit :-
https://brainly.com/question/11231920
#SPJ1
Why is a physical property not a characteristic of matter that you can’t observe or measure without changing the identity of matter
Answer:
Characteristics of matter change due to chemical changes, not physical ones. Physical properties can be determined without changing the substance's chemical identity
Explanation:
identify the phrases that generally apply to molecular compounds.
a. contain metals and nonmetals
b.are often gases or liquids
c. have low melting points
d.contain ionic bonds
e. use covalent bonding
The phrases that applied to molecular compounds are often gases and liquids, which have low melting points and and use covalent bonding. So. options (b), (c) and (e) are correct.
Molecular compounds are defined as the chemical compounds that take the form of discrete molecules. The molecular compounds are very different from ionic compounds like sodium chloride. These compounds are held together by covalent bonds. Molecular compounds are usually gases and liquids at room temperature due to their low melting and boiling points. Some molecular compounds are solids at room temperature but they tend to be soft and flexible. The boiling points of these compounds are also low due to weak intermolecular forces because it does not take that much energy to separate and vaporize the molecular molecules.
To learn more about Molecular compounds
https://brainly.com/question/14018732
#SPJ4
How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.How are cellular respiration and photosynthesis similar?
Both processes break down glucose.
Both processes create food for organisms.
Both processes produce waste.
Both processes take place in chloroplasts.
Answer: Both processes produce waste.
Reaction 1:HOCl(aq)+H2O(l)⇄H3O+(aq)+OCl−(aq)K1=[H3O+][OCl−][HOCl]Reaction 2:2H2O(l)⇄H3O+(aq)+OH−(aq)K2=[H3O+][OH−]Reaction 3:OCl−(aq)+H2O(l)⇄HOCl(aq)+OH−(aq)K3=?
Based on the equilibrium constants given above, which of the following gives the correct expression for the equilibrium constant for reaction 3?
The correct expression for the equilibrium constant for Reaction 3 is:
K3 = ([HOCl]^2)/[OCl-][H2O].
To obtain the expression for the equilibrium constant (K3) for Reaction 3, we can use the equilibrium constants for Reactions 1 and 2, and apply the principle of chemical equilibrium:
K3 = ([HOCl][OH-])/([OCl-][OH-])
We can substitute [OH-] from Reaction 2 into the equation above, which gives:
K3 = ([HOCl][H3O+])/([OCl-][H2O])
To get rid of [H3O+] in the expression, we can use Reaction 1 and substitute [H3O+] with the product of [OCl-] and [HOCl]/[HOCl], which gives:
K3 = ([HOCl][OCl-][HOCl])/([OCl-][H2O][HOCl])
Simplifying this expression, we get:
K3 = ([HOCl]^2)/[OCl-][H2O]
Therefore, the correct expression for the equilibrium constant for Reaction 3 is K3 = ([HOCl]^2)/[OCl-][H2O].
What is an equilibrium constant?
An equilibrium constant (K) is a value that describes the relative amounts of products and reactants present in a chemical reaction at equilibrium, under a given set of conditions (such as temperature, pressure, and concentration) in the balanced chemical equation.
To know more about equilibrium constant, visit:
https://brainly.com/question/29802105
#SPJ1
The chemical formula Al2SiO5 can form any of these three minerals, given different combinations of temperature and pressure conditions: a. marble, quartzite, and hornfels b. quartz, feldspar, and mica c. hematite, magnetite, and goethite d. andalusite, kyanite, and sillimanite e. granite, sandstone, and marble
The chemical formula [tex]Al_2SiO_5[/tex] can form the three minerals, andalusite, kyanite, and sillimanite under different combinations of temperature and pressure conditions. Option D is correct.
What are minerals? Minerals are solid inorganic materials with a specific chemical formula and crystalline structure. Most minerals are naturally occurring substances. Some minerals are silicates, while others are carbonates, oxides, sulfides, or halides, among other groups.What is the chemical formula? The chemical formula refers to the formula that represents the atoms in a compound's molecule. The chemical formula of a mineral is a shorthand description of the relative proportions of a mineral's primary chemical constituents. [tex]Al_2SiO_5[/tex] is a chemical formula. It means that for every two aluminum atoms, there is one silicon atom, and five oxygen atoms in a mineral.What is the significance of temperature and pressure in mineral formation? Temperature and pressure are essential factors in mineral formation. A mineral can only form under certain temperature and pressure conditions. Because the temperature and pressure conditions vary depending on the type of mineral, each mineral has unique characteristics. The pressure and temperature requirements for the formation of some minerals are so unique that they can only form under extreme conditions.The chemical formula [tex]Al_2SiO_5[/tex] can form andalusite, kyanite, and sillimanite under different combinations of temperature and pressure conditions. Hence, option D is correct.Learn more about the chemical formula: https://brainly.com/question/11574373
#SPJ11
when working with acids, which of the following is the proper way to dilute these chemicals? group of answer choices place acid in a graduated cylinder then add water to the correct volume none of the above add water to the acid in a beaker add the acid to water
Adding the acid to water is the proper way to dilute chemicals. Begin by measuring the correct volume of acid in a graduated cylinder. Next, pour the acid into a beaker containing the correct volume of water. Finally, stir the solution until it is fully mixed.
What are acids?Acids are strong chemical compounds. When working with acids, it is important to dilute them in the correct manner to prevent harm to oneself or the surrounding environment.
The correct method of dilution for acids is to add the acid to water, not the other way around. This is because adding water to acid can cause an exothermic reaction that releases heat and may cause the acid to splash and burn you.
When diluting acids, be sure to add the acid to water slowly and stir continuously to prevent splashing and heat generation. Therefore, the correct answer is to add the acid to water.
Learn more about Acids here:
https://brainly.com/question/29796621
#SPJ11
9. Balance the following redox reactions:
a. Al3+ + K → Al + K+
b. Sn4+ + H₂ → Sn + H+
Redox reactions include the transfer of electrons between reactants. In order to balance a redox reaction, both the mass and the charge must be conserved.
How can the two reactions be balanced?This is done by identifying the species that are oxidized and reduced, and then adding electrons and adjusting coefficients as necessary to ensure that the number of electrons transferred is equal on both sides of the reaction.
In reaction (a), Al³⁺ is reduced to Al, which means it gains electrons. K is oxidized to K⁺, which means it loses electrons. To balance the reaction, we can add 3 electrons to the left side (to balance the reduction of Al³⁺) and adjust coefficients as follows:
Al³⁺ + 3K → Al + 3K⁺
Now, the number of electrons transferred is equal on both sides (3 on the left and 3 on the right), and the charge and mass are balanced.
In reaction (b), Sn⁴⁺ is reduced to Sn, which means it gains electrons. H₂ is oxidized to H⁺, which means it loses electrons. To balance the reaction, we can add 2 electrons to the left side (to balance the reduction of Sn⁴⁺) and adjust coefficients as follows:
Sn⁴⁺ + 2H₂ → Sn + 4H⁺
Now, the number of electrons transferred is equal on both sides (2 on the left and 2x2=4 on the right), and the charge and mass are balanced.
The final answer is:
a. 2Al³⁺ + 6K → 2Al + 6K⁺
b. Sn⁴⁺ + 2H⁺ + 2e⁻ → Sn²⁺ + H₂
To find out more about redox reactions, visit:
https://brainly.com/question/13293425
#SPJ1
a mixture of helium, argon and krypton is made and stored in a cylinder at a total pressure of 2.80 atm. the partial pressure of helium is 900 torr, and that of argon is 250 torr. what is the partial pressure of krypton in the mixture?
The partial pressure of krypton in the mixture is 1.65 atm. This can be calculated using the ideal gas law. The ideal gas law states that the pressure of a gas (P) is equal to the number of moles (n) multiplied by the universal gas constant (R) multiplied by the temperature (T).
Using the given information, we can set up the equation:
2.80 atm = (x + 0.125 + 0.009) (0.0821) (273)Where x is the number of moles of krypton. Solving for x gives x = 0.073 moles of krypton. Finally, the partial pressure of krypton can be calculated by multiplying the number of moles of krypton (0.073) by the universal gas constant (0.0821) and temperature (273). This gives a partial pressure of krypton in the mixture of 1.65 atm.
Learn more about partial pressure of krypton: https://brainly.com/question/29596364
#SPJ11
what is the ph at the equivalence point in the titration of a 23.4 ml sample of a 0.427 m aqueous nitrous acid solution with a 0.494 m aqueous potassium hydroxide solution?
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00.
What is titration?Titration is a chemical analysis method that measures the amount of a chemical compound in a solution by using a standard solution (a solution of known concentration).
Titration can be used to determine the concentration of an unknown solution, the quantity of a particular substance in a sample, or the identity of a substance. Titration is frequently utilized in chemistry labs to test acid or base solutions' strength.
Titration calculations involve the use of formulas that relate the concentration of the standard solution to the concentration of the unknown solution. Acid-base titration, which measures the concentration of an acidic or basic solution, is one of the most popular types of titration.
The pH at the equivalence point in the titration of a 23.4 mL sample of a 0.427 M aqueous nitrous acid solution with a 0.494 M aqueous potassium hydroxide solution is 7.00 because nitrous acid (HNO2) is a weak acid with a Ka value of 4.5 x 10-4. At the equivalence point, the quantity of moles of the potassium hydroxide solution added is equal to the quantity of moles of the nitrous acid solution. The pH of the solution is determined by the salt produced during the titration's neutralization reaction.
The salt produced during this titration is potassium nitrite (KNO2), which is a salt of a strong base and a weak acid. When dissolved in water, potassium nitrite undergoes hydrolysis and produces a solution with a pH of about 7.00. As a result, at the equivalence point, the pH of the solution is 7.00.
Learn more about titration: https://brainly.com/question/186765
#SPJ11
Suppose a single photon strikes an electron in some material, knocking it out of its atom. Which of the following statements are true concerning the scattered photon?Check all that apply:The scattered photon has greater energy than the incident photon.The scattered photon has a shorter wavelength than the incident photon.The scattered photon has a longer wavelength than the incident photon.The scattered photon has less energy than the incident photon.
The correct statements are as follows: "The scattered photon has less energy than the incident photon" and "The scattered photon has a longer wavelength than the incident photon."
"The scattered photon has greater energy than the incident photon": This statement is incorrect because, during the Compton scattering process, the scattered photon loses energy. As a result, its energy is less than the energy of the incident photon.
"The scattered photon has a shorter wavelength than the incident photon": This statement is incorrect because, during the Compton scattering process, the scattered photon has a longer wavelength than the incident photon.
The wavelength of the scattered photon is longer due to the loss of energy during the scattering process.
"The scattered photon has a longer wavelength than the incident photon": This statement is correct because, during the Compton scattering process, the scattered photon has a longer wavelength than the incident photon.
The wavelength of the scattered photon is longer due to the loss of energy during the scattering process.
"The scattered photon has less energy than the incident photon": This statement is correct because, during the Compton scattering process, the scattered photon loses energy.
As a result, its energy is less than the energy of the incident photon.
Learn more about photon: https://brainly.com/question/25746629
#SPJ11
a 1m solution contains 20 grams of solute in 500ml of solution. what is the mass of 1 mole of solute
The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).
How to determine mass?To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles
Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol
Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol
Therefore, the mass of 1 mole of solute is 40 grams.
Learn more about Mass here:
https://brainly.com/question/19694949
#SPJ11
Classify the bonding in each molecule as ionic, polar covalent, or nonpolar covalent. Compound Bonding Br2 _______
MgF2 _______
H2S _______
MgO _______
F2 _______
HF _______
Ca3P2 _______
H2Se _______
Given the below table of compounds and the type of bonding present in each of them. Compounds Bonding Br2 nonpolar covalent, MgF2 ionic, H2S polar covalent, MgO ionic, F2 nonpolar covalent, HF polar covalent, Ca3P2 Ionic, H2Se polar covalent.
Ionic bonding is a type of chemical bond that occurs as a result of the attraction between oppositely charged ions. They are generally formed between metals and non-metals. They result in the formation of an ionic compound.
A polar covalent bond is a type of chemical bond in which electrons are shared unequally between two atoms. It generally occurs between two non-metals. It results in the formation of a polar molecule. A non-polar covalent bond is a type of chemical bond in which electrons are shared equally between two atoms. It generally occurs between two identical non-metals. It results in the formation of a non-polar molecule.
Learn more about ionic bond at:
https://brainly.com/question/977324
#SPJ11
Jeniah was calculating the mass of her favorite rocket fuel Hydrogen peroxide (H2O2). She wants to use some of it in a devil's toothpaste explosion, but she needs to do it safely and have accurate measurements. Check her work to ensure she has proper amounts. Below is her calculation of the molar mass of hydrogen Peroxide using the periodic table: Hydrogen- 1 gram per mole x 2 atoms = 2 grams per mole Oxygen - 16 grams per mole x 1 atoms = 16 grams per mole Total = 18 grams per mole Jeniah's calculation is going to result in the reaction she is planning true or false
Answer:
Jeniah's calculation of the molar mass of hydrogen peroxide is correct.
Explanation:
Here is a step-by-step explanation of how she arrived at the answer:
Jeniah identified the atomic masses of each element in hydrogen peroxide from the periodic table.She then counted the number of atoms of each element in the molecule of hydrogen peroxide, which in this case is 2 hydrogen atoms and 2 oxygen atoms.She then multiplied the atomic mass of each element by the number of atoms in the molecule.Finally, she added the products of the previous step together to obtain the molar mass of hydrogen peroxide.In this case, the molar mass of hydrogen peroxide that Jeniah calculated is 18 grams per mole, which is the correct molar mass for this compound. This means that if Jeniah uses this amount of hydrogen peroxide, she will have the correct amount of the compound needed for her experiment. However, it's important to note that in addition to knowing the amount of a substance needed for an experiment, it's also important to handle the substance safely and follow all necessary precautions to avoid accidents or harm.
Pls helppppp!!!! It’s important :(
Answer:
The new volume will be 1.61 L.
Explanation:
P₁V₁/P₂V₂
P₁=2.5atm
V₁=20L
P₂=31atm
V₂=?
20L(2.5atm)/31atm(V₂)
20*2.5/31(V₂)
V₂=1.61 L
Acetylene gas (C2H2) is used in welding torches. When it reacts with oxygen, it produces carbon dioxide (CO2) and steam (H2O). The reaction can be described by the equation: 2C2H2 + 5O2 = 4CO2 + 2H2O. How much mass of C2H2 is needed to react with 68. 1g of O2 to produce 75. 0g of CO2 and 15. 35g of steam
22.15 g of C2H2 is required to react with 68.1 g of O2 to produce 75.0 g of CO2 and 15.35 g of H2O.
Amount of CO2 produced = 75.0 g
Amount of H2O produced = 15.35 g
From the chemical equation, we can see that 2 moles of C2H2 react with 5 moles of O2 to produce 4 moles of CO2 and 2 moles of H2O. Therefore, the mole ratio of C2H2 to O2 is 2:5.
We can use this ratio to calculate the amount of C2H2 required to react with 68.1 g of O2:
Amount of O2 = 68.1 g
Molar mass of O2 = 32.00 g/mol
Number of moles of O2 = [tex]\frac{amount}{molar mass} = \frac{68.1 g}{32.00 g/mol} =2.128 mol[/tex]
According to the mole ratio, the amount of C2H2 required is:
Number of moles of C2H2 = (2/5) x 2.128 mol = 0.8512 mol
Finally, we can convert the number of moles of C2H2 to grams:
Molar mass of C2H2 = 26.04 g/mol
Mass of C2H2 required = number of moles x molar mass
Mass of C2H2 required = = 0.8512 mol x 26.04 g/mol = 22.15 g.
A reaction is a process in which one or more substances, called reactants, undergo a transformation to produce one or more different substances, called products. The transformation involves the breaking and formation of chemical bonds, resulting in a change in the chemical composition and properties of the reactants. Reactions can be classified into several types based on their characteristics, such as the type of chemical bond broken or formed, the presence of energy changes, or the speed of the reaction.
Some common types of reactions include oxidation-reduction reactions, acid-base reactions, and precipitation reactions. Chemical reactions are described using chemical equations, which show the reactants on the left side and the products on the right side, separated by an arrow. The coefficients in the equation indicate the relative amounts of each substance involved in the reaction, and the equation must be balanced to ensure that the law of conservation of mass is obeyed.
To learn more about Reaction visit here:
brainly.com/question/30115256
#SPJ4
Will the following reaction result in a precipitate? If so, identify the precipitate.K3PO4 + Cr(NO3)+ 3 KNO3 + CrPO4A. No, a precipitate will not formB. Yes, CrPO4 will precipitateC. Yes, KNO3 will precipitate
Answer: B. Yes, CrPO4 will precipitate. In the given reaction: K3PO4 + Cr(NO3)3 → 3 KNO3 + CrPO4A precipitate is formed when two aqueous solutions are mixed that resulting in the formation of an insoluble compound.
The insoluble compound is called a precipitate. In the given reaction, K3PO4 and Cr(NO3)3 are the reactants. On mixing the two reactants, we can see that there are no common ions present in the reactants that could result in the formation of an insoluble compound. So, no precipitate is formed.
Based on solubility rules, CrPO4 is an insoluble compound. When K3PO4 reacts with Cr(NO3)3, it forms CrPO4. So, the precipitate that is formed is CrPO4. Hence, the correct option is B. Yes, CrPO4 will precipitate.
Read more about the topic of precipitation:
https://brainly.com/question/13877944
#SPJ11
Which of the following is most likely to cause you to start a filtration over again?
A.
failure to use a stirring rod
B.
overflowing the top edge of the filter paper
C.
placing the tip of the funnel in the center of the beaker
D.
using too large a piece of filter paper
Answer:
overflow the top edge of the filter paper
Emma prepared two glasses of water at two different temperatures. She added a spoonful of table salt to the cold water in glass #1 and spoonful of rock salt to the hot water in glass #2. She observed that the spoonful of table salt in glass #1 dissolved faster than the spoonful of rock salt in glass #2. Based on this observation, Emma concluded that salt dissolves faster in cold water than in hot water.
What question was Emma trying to investigate in her experiment?
Are table salt and rock salt soluble or insoluble in cold and hot water without stirring?
Does surface area affect the rate of dissolving of a substance in water?
Does temperature affect the rate of dissolving of a substance in water?
What type of salt dissolves faster in water when stirred at different temperatures?
Answer: Does temperature affect the rate of dissolving a substance in water?
How many moles nitrogen contain 4x10² particles
There are approximately 6.64 x 10^-22 moles of nitrogen in 4x10^2 particles.
What is moles ?
Mole is an SI unit used to measure the amount of any substance.
To determine the number of moles of nitrogen in 4x10^2 particles, we need to use Avogadro's number, which is the number of particles in one mole of a substance. Avogadro's number is approximately 6.022 x 10^23 particles per mole.
We can use the following formula to calculate the number of moles:
moles = number of particles / Avogadro's number
moles of nitrogen = 4x10^2 particles / 6.022 x 10^23 particles per mole
moles of nitrogen = 6.64 x 10^-22 moles
Therefore, there are approximately 6.64 x 10^-22 moles of nitrogen in 4x10^2 particles.
Learn more about moles here : brainly.com/question/29367909
#SPJ1