Calculate the pH at 25°C of a 0.73M solution of potassium acetate KCH3CO2. Note that acetic acid HCH3CO2 is a weak acid with a pKa of 4.76 . Round your answer to 1 decimal place.

The tension in the rope when the box is at rest is 559.17 N, when the box is moving up with a steady speed of 4.60 m/s is 559.17 N, when the box has [tex]v_y=4.60\  m/s[/tex] and is speeding up at [tex]4.60\  m/s^2[/tex] is 821.37 N and when the box has [tex]v_y=4.60\ m/s[/tex] and is slowing down at [tex]4.60\ m/s^2[/tex] is 296.97 N.

A 57.0 kg box hangs from a rope. The tension in the rope is calculated as follows:

(A) The box is at rest: The tension on the rope is equal to the weight of the box. Thus,

T = mg

where T is the tension, m is the mass of the box and g is the acceleration due to gravity.

[tex]T = 57.0 kg \times 9.8 m/s^2 = 559.17 N[/tex]

The tension in the rope is 559.17 N.

(B) The box moves up a steady 4.60 m/s: As the box moves up, the tension in the rope is equal to

T = mg,

where T is the tension, m is the mass of the box, and g is the acceleration due to gravity.

[tex]T = 57.0 kg \times 9.8 m/s^2[/tex]

T = 559.17 N

The tension in the rope is 559.17 N.

(C) The box has [tex]v_y = 4.60 \ m/s[/tex] and is speeding up at 4.60 m/s²

The tension in the rope is given by

T = mg + ma,

where T is the tension, m is the mass of the box, g is the acceleration due to gravity and a is the acceleration.

Given,[tex]v_y = 4.60\  m/s[/tex] and [tex]a = 4.60 m/s^2[/tex], therefore [tex]a = a_y[/tex]

[tex]T = mg + ma_y = 57.0 kg \times 9.8 m/s^2 + (57.0 kg \times 4.60 m/s^2)[/tex]

T = 821.37 N

The tension in the rope is 821.37 N.

(D) The box has [tex]v_y = 4.60 \ m/s[/tex] and is slowing down at 4.60 m/s²: As the box slows down, the tension in the rope is given by

T = mg - ma,

where

T is the tension, m is the mass of the box, g is the acceleration due to gravity and a is the acceleration.

Given,[tex]v_y = 4.60 \ m/s[/tex] and [tex]a = 4.60\  m/s^2[/tex], therefore [tex]a = -a_y[/tex]

[tex]T = mg - ma_y = 57.0 kg \times 9.8 m/s^2 - (57.0 kg \times 4.60\  m/s^2)[/tex]

T = 296.97 N

The tension in the rope is 296.97 N.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11

Answer:

The power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW

Explanation:

To answer this question, we need to know the density of water, the gravitational acceleration, and the efficiency of the dam. Let's assume that the density of water is 1000 kg/m³, the gravitational acceleration is 9.81 m/s², and the efficiency of the dam is 100%.

The power of water transferred each hour through the dam is given by the formula:

Power = Flow rate x Density x Gravity x Height x Efficiency

where Flow rate is the volume of water that passes through the dam each second, Density is the density of water, Gravity is the gravitational acceleration, Height is the height of the dam, and Efficiency is the efficiency of the dam.

First, let's calculate the flow rate:

Flow rate = Area x Velocity

where Area is the cleared area of 500m² and Velocity is the speed of water passing through the dam.

Assuming that the water is moving at a constant speed, we can use the formula:

Velocity = Height / Time

where Time is the time it takes for the water to pass through the dam.

Since the height of the dam is 500m and we want to know the power transferred each hour, we can convert the time to seconds as follows:

Time = 1 hour / 3600 seconds per hour = 0.000277778 hours

So, the velocity of the water is:

Velocity = 500m / 0.000277778 hours = 1,800,000 m/s

Now we can calculate the flow rate:

Flow rate = 500m² x 1,800,000 m/s = 900,000 m³/s

Finally, we can calculate the power of water transferred each hour through the dam:

Power = Flow rate x Density x Gravity x Height x Efficiency

Power = 900,000 m³/s x 1000 kg/m³ x 9.81 m/s² x 500m x 1

Power = 4,405,500,000 watts or approximately 4.41 GW

Therefore, the power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW.

(i) Switch k1 is closed:

The current passing through the circuit is:  0.25 amps

R_total = R1 + R2 = 3 + 5 = 8 ohms

The current passing through the circuit is:

i = V / R_total = 2 / 8 = 0.25 amps

(ii) Switches k1 and k2 are closed:

The current passing through the circuit is: 1.07 amps

1/R_total = 1/R1 + 1/(R2 + R3) = 1/3 + 1/(5 + 0) = 8/15

R_total = 15/8 ohms

The current passing through the circuit is:

i = V / R_total = 2 / (15/8) = 1.07 amps

(iii) Switch k1 is open and k2 is closed:

The current passing through the circuit is: 1.07 amps

1/R_total = 1/R2 + 1/(R1 + R3) = 1/5 + 1/(3 + 0) = 1/5 + 1/3 = 8/15

R_total = 15/8 ohms

The current passing through the circuit is:

i = V / R_total = 2 / (15/8) = 1.07 amps

So the current passing through the circuit depends on which switches are closed, and can range from 0.25 amps to 1.07 amps.

What is current?

Crrent refers to the flow of electric charge through a conductor, such as a wire. It is measured in amperes (A) and is defined as the rate at which electric charge flows past a given point in a circuit. current is caused by the movement of charged particles, such as electrons or ions, through a conductor.

To know more about current, visit:

https://brainly.com/question/21505732

#SPJ1

The speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.784 m/s.

The speed of the block when it has moved a distance of 0.0200 m from its initial position when it has been released from rest is given by v. The force constant of the horizontal spring is given by k. The block has a mass of m. The distance the spring has been compressed is given by d. The coefficient of kinetic friction between the floor and the block is given by μk.

It is asked to determine the speed of the block. There are different ways to approach this problem, but one of the most common ways is to consider the conservation of energy principle. This principle states that the total energy of a system remains constant if no external work is done on it. In other words, the initial energy of the system is equal to the final energy of the system.

Using this principle, we can write :

Initial energy = final energy

1/2 k x² + m g d = 1/2 m v² + m g d + f k d

where x = initial compression of the spring (0.0320 m), d = compression of the spring at the end (0.0120 m), v = speed of the block f, k = kinetic friction force, mg = weight of the block, k = spring constant of the horizontal spring. By solving this equation for v, we get:

v = sqrt((k/m) x² + 2g(mu_k- d))

where:g = 9.81 m/s²

We can substitute the given values into this equation to get:

v = sqrt((800/2.35) x² + 2*9.81(0.35 - 0.012))v = 0.784 m/s

Therefore, the speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.784 m/s.

Learn more about friction and speed at:https://brainly.com/question/13009300

#SPJ11

At t = 10.0 s, the height of the rocket above the surface of the earth is 200 m. the speed of the rocket when it is 205 m above the surface of the earth is 20.64 m/s.

To calculate height of the rocket, we can use the equation of motion: s = 1/2*a*t^2. Therefore, the height of the rocket is: s = 1/2*2.90m/s^2*(10.0s)^2 = 200 m

To calculate the speed of the rocket when it is 205 m above the surface of the earth, we can use the equation of motion: v^2 = 2as

Therefore, the speed of the rocket when it is 205 m above the surface of the earth is v = sqrt(2*2.90m/s^2*205m) = 20.64 m/s.

Learn more about average speed: brainly.com/question/6504879

#SPJ11

The required items in order from shortest to longest: 0.01c < 0.1c < 0.25c < 0.5c

The length contraction phenomenon occurs when objects are observed from different reference frames moving at relativistic speeds. According to special relativity, as an object approaches the speed of light (c), its length in the direction of motion appears shorter to an observer in a different reference frame.

In this case, the observer moving at 0.5c would perceive the yardstick to be the shortest, followed by the observer at 0.25c, the observer at 0.1c, and finally, the observer at 0.01c would perceive the yardstick to be the longest. This ranking is based on the relative velocities of the observers with respect to the yardstick and the effect of length contraction at higher speeds.

Learn more about length here:

https://brainly.com/question/29754967

#SPJ12

The magnetic field inside the loop is directed out of the paper near the wire, but into the paper elsewhere. The correct answer is Option D.

A wire loop is a closed-circuit that is often referred to as a coil. A current-carrying loop produces a magnetic field around it, which is used to detect changes in the electric current flowing through the wire by the magnetic field it produces. A loop of wire is used in electric motors, electric generators, and inductors.

A wire loop carrying a current produces a magnetic field. A clockwise current flow results in a clockwise magnetic field direction, which is directed out of the paper near the wire but into the paper elsewhere. A counter-clockwise current flow results in a counter-clockwise magnetic field direction, which is directed into the paper near the wire but out of the paper elsewhere.

Learn more about magnetic field here: https://brainly.com/question/30358441.

#SPJ11

The angular acceleration of the blades  is 5.897 rad/s². It can be calculated using the formula α as the ratio of torque to moment of Inertia.

The torque is a rotational or twisting force. Angular acceleration is the rate at which the angular velocity of an object changes, measured in radians per second squared (rad/s²).

Given the torque and moment of inertia, we may utilize the following formula to find the angular acceleration of the blades:

[tex]\alpha= \dfrac{Torque}{Moment \; of \; inertia}\\\alpha= \dfrac{\tau}{I}[/tex]

where τ is the torque in newton-meters (N-m),I is the moment of inertia in kg-m², α is the angular acceleration in radians per second squared (rad/s²).

Rearranging the formula to solve for α gives:

[tex]\alpha=2.3/0.39\\=5.897 rad/s^2[/tex]

Therefore, the angular acceleration of the blades is 5.897 rad/s².

For further information about angular acceleration click on below link:

https://brainly.com/question/30238727

#SPJ11

Ceteris paribus, a decrease in capital productivity is the event that would cause both the equilibrium interest rate and the equilibrium quantity of investment to fall. The correct answer is option C.

Ceteris paribus is a Latin expression that means "all other things being equal." Ceteris paribus is a model in which economists use to analyze the effect of one independent variable on a dependent variable while keeping all other independent variables constant. This implies that only one variable is allowed to change while all other variables are held constant at their current level or position.

Therefore, Ceteris paribus, an increase in investor confidence, an increase in cosmetic income and wealth, and a strength of time preference will not cause both the equilibrium interest rate and the equilibrium quantity of investment to fall. However, a decrease in capital productivity is an event that would cause both the equilibrium interest rate and the equilibrium quantity of investment to fall.

When capital productivity is low, firms are unable to produce goods and services efficiently, and as a result, the demand for investment falls. When the demand for investment falls, the equilibrium quantity of investment will also decrease, leading to a decrease in the equilibrium interest rate.

To know more about Ceteris paribus, refer here:

https://brainly.com/question/13864080#

#SPJ11

3.) the total momentum change per unit of time, and the total momentum change are both important in determining the amount of damage an object sustains in a collision.

The amount of damage an object receives in a collision depends on both the overall momentum change and the momentum change per unit of time. The mass and velocity of the objects colliding determine the total momentum change, which is a measure of the force of impact. The impulse, also known as the change in momentum per unit of time, is equally significant. This gauges how long an impact lasts and how the force is applied throughout that time. Impacts that last longer and exert less force can cause less harm than impacts that last less time and exert more force. The specific factors that contribute to damage will depend on the details of the collision, such as the speed, mass, and shape of the objects involved.

learn more about momentum change here:

https://brainly.com/question/30157362

#SPJ4

A 1 kg box falls two metres from a shelf and lands on the ground after 0.021 seconds. The box impacted the ground with a force of around 524.7 N.

The box impacted the ground with a force of around 524.7 N.

Explanation: We can determine the force using the equation F = m * (v/t), where m is the box's mass, v is the velocity change (which is the ultimate velocity because the box starts at rest and comes to a halt), and t is the time it takes for the box to stop.

Given that the box falls 2 metres and its terminal velocity is 0 m/s, v = 2 m/s.

524.7 N is equal to F = 1.1 kg * (2 m/s / 0.021 s).

learn more about force here:

https://brainly.com/question/13191643

#SPJ4

Answer:

the magnitude of the electric field at the equilateral triangle is 3.63 x 10^4 N/C, and its direction makes an angle of 55.7 degrees with the positive x-axis.

Explanation:

To find the electric field at the point P above the x-axis, we can use the formula for the electric field due to a point charge:

E = k * Q / r^2

where k is Coulomb's constant (k = 9.0 x 10^9 Nm^2/C^2), Q is the charge of the point charge, and r is the distance between the point charge and the point P.

First, let's find the distance between point A and point P. Since point P forms an equilateral triangle with points A and B, we know that the distance between points A and P is equal to the distance between points B and P. We can use the Pythagorean theorem to find the distance between point B and point P:

BP = sqrt[(0.800 m)^2 + (0.866 m)^2] = 1.32 m

Therefore, the distance between point A and point P is also 1.32 m.

Next, we can use the formula for the electric field to find the electric field at point P due to point A:

EA = k * QA / r^2

where QA is the charge of point A (QA = 3.00 x 10^-6 C). Plugging in the values, we get:

EA = (9.0 x 10^9 Nm^2/C^2) * (3.00 x 10^-6 C) / (1.32 m)^2 = 1.70 x 10^4 N/C

The electric field due to point B at point P has a magnitude and direction that are the same as the electric field due to point A, since the charges are the same and the distances are the same.

Therefore, the total electric field at point P due to points A and B is:

E = 2 * EA = 2 * 1.70 x 10^4 N/C = 3.40 x 10^4 N/C

To find the direction of the electric field, we can use trigonometry. Let θ be the angle between the x-axis and the line connecting point A to point P. Since point P forms an equilateral triangle with points A and B, we know that θ = 60°.

The x-component of the electric field is Ecosθ, and the y-component of the electric field is Esinθ. Plugging in the values, we get:

Ex = E * cos(60°) = (3.40 x 10^4 N/C) * (1/2) = 1.70 x 10^4 N/C

Ey = E * sin(60°) = (3.40 x 10^4 N/C) * (sqrt(3)/2) = 2.95 x 10^4 N/C

Since the point P is above the x-axis, the direction of the electric field is in the second quadrant (i.e., the angle is negative). Therefore, the angle between the electric field and the negative x-axis is:

θ = tan^-1(Ey/Ex) = tan^-1[(2.95 x 10^4 N/C) / (1.70 x 10^4 N/C)] = 59.2°

The negative sign indicates that the electric field makes an angle of -59.2° with the positive x-axis. To convert this to an angle with the negative x-axis, we can subtract 180°:

θ = -180° + 59.2° = -120.8°

Rounding to the nearest degree, we get:

θ ≈ -121°

Therefore, the magnitude of the electric field is 3

A current is a flow of water or air that is moving in one direction. A current refers to the flow of a fluid in a certain direction, such as the movement of water or air.

A fluid, like water or air, flowing in one direction is known as a current in nature. From tiny streams to massive ocean currents that can cross entire ocean basins, currents can occur on a variety of scales. Many elements, including as temperature variations, wind patterns, and the rotation of the Earth, influence these fluid movements. Ocean currents are particularly significant because by moving heat and nutrients around the planet, they have a significant impact on determining the Earth's climate. Certain ocean currents, like the Gulf Stream, can significantly change local weather patterns and even have an impact on the earth's climate. Thus, it is crucial for many scientific disciplines, such as meteorology, oceanography, and marine biology, to comprehend and monitor currents.

Learn more about current here:

https://brainly.com/question/30219466

#SPJ4

The increase in the car's kinetic energy over time indicates that the car's speed is increasing.

However, since the car is traveling on a flat road, its height or position above the ground remains constant, which means that its potential energy is not changing. Therefore, the total mechanical energy of the car, which is the sum of its kinetic and potential energy, is increasing. This increase in mechanical energy is due to the work done by the car's engine, which converts chemical energy into kinetic energy. The increase in mechanical energy results in an increase in the car's speed, which can be observed through its increasing kinetic energy.

To know more about kinetic energy, here

brainly.com/question/26472013

#SPJ4

(a) The current in the 8.00 Ω resistor connected to a battery that has an internal resistance of 0.15 Ω and a terminal voltage of 9.00 V is 1.0 A.

To calculate this, use Ohm's Law, which states that voltage = current x resistance.

Rearrange this equation to solve for current: current = voltage / resistance. Plug in the values for voltage and resistance to get:

current = 9.00 V / 8.00 Ω + 0.15 Ω = 1.0 A.

(b) The EMF (electromotive force) of the battery is 9.00 V. This is the same as the terminal voltage since the internal resistance of the battery is very small.

Learn more about resistance at : https://brainly.com/question/24119414

#SPJ11

In computing the standard error of the mean, the finite population correction factor is used when the group of answer choices n/n > 0.05. Hence, the correct answer is option A.

The standard error of the mean (SEM) is a statistic that measures the accuracy with which a sample represents the population mean. It indicates how precisely the sample estimate of the mean varies from the real mean of the population.The formula for SEM is as follows:SEM = s / sqrt (n), where s is the sample standard deviation and n is the sample size. When the sample size is large, it is common to assume that the population standard deviation σ is unknown and is therefore estimated using the sample standard deviation s. We do this by dividing s by the square root of the sample size.

When the sample size is a substantial portion of the population, the finite population correction factor (FPC) must be applied to the SEM formula to account for the sample size's effect on the standard error. FPC is the ratio of the population size minus the sample size to the population size minus one, raised to the power of 0.5.In summary, the finite population correction factor is utilized when the ratio n/N is greater than 0.05. If the ratio is less than or equal to 0.05, the FPC can be ignored.

More on standard error: https://brainly.com/question/16766208

#SPJ11

The method of using a screen gives a more accurate value of focal length

The method of using a screen gives a more accurate value of focal length because it is not subject to parallax errors. The image distance obtained in Method A is approximately equal to the focal length because it relies on the angle of incidence and angle of refraction of light, which can be inaccurate if the measurements are not taken precisely. The Lens Equation in the Appendix states that the focal length is equal to the image distance divided by the magnification, which can give a more accurate result than Method A.

Learn more about focal length at  brainly.com/question/29870264

#SPJ11

The net force on a current loop when its face is perpendicular to a varying magnetic field will not be zero.

The x, y, and z projections of the net force on the loop can be expressed in terms of the variables I, a, b, and B0.

For the x-component of the force, it can be expressed as:

Fx = I a B0 (2x/b^2)

For the y-component of the force, it can be expressed as:

Fy = 0

For the z-component of the force, it can be expressed as:

Fz = -I a B0 (1-x/b)

Where

Learn more about force : brainly.com/question/12785175

#SPJ11

R = R1 + R2 + R3    equivalent resistance of 3 resistors in series

I = V / R

Part A: The voltage of the capacitor will remain constant until some external influence acts on it. Which is 12V.

Part B: The voltmeter reading will be 24.0 V.

Part C: The voltmeter reading will be 3.0 V.

Given that,

Charge of the capacitor = C

Voltage of the battery = V = 12.0 V

Part A:

A voltmeter is connected across the two plates without discharging them.

What does it read?

The voltmeter will read the same voltage as the battery voltage i.e., 12.0 V. This is because once the capacitor is fully charged, the battery is disconnected without loss of any of the charge on the plates.

Part B:

What would the voltmeter read if the plate separation were doubled?

The capacitance of the capacitor is given by,

C=ϵ[tex]_0[/tex] [tex]\frac{A}{d}[/tex]

Where,  ϵ[tex]_0[/tex] is the permittivity of free space

A is the area of each plate and

d is the separation between the plates

The capacitance is inversely proportional to the separation between the plates. Doubling the separation will reduce the capacitance by half. T

Therefore, capacitance will become 5.0 μF.

Now the charge on the capacitor is given by,

Q = CV = 10.0 × [tex]10^{-6}[/tex] × 12.0 = [tex]1.2 \times10^{-4}[/tex] C

Now the capacitance is 5.0 μF, therefore,

Q’ = CV’ = Q

⇒ V’ = Q’/C’ = Q/C =1.2 × [tex]10^{-4}[/tex]/ 5.0 × [tex]10^{-6}[/tex] = 24.0 V

Part C:

What would the voltmeter read if the radius of each plate was doubled, but the separation between the plates was unchanged?

The capacitance of the capacitor is given by,

C=ϵ[tex]_0[/tex] [tex]\frac{A}{d}[/tex]

Where, ϵ[tex]_0[/tex] is the permittivity of free space

A is the area of each plate and

d is the separation between the plates

The capacitance is directly proportional to the area of the plates.

Doubling the radius will increase the capacitance by four times.

Therefore, capacitance will become 40.0 μF.

Now the charge on the capacitor is given by,

Q = CV = 10.0 × [tex]10^{-6}[/tex] × 12.0 = 1.2 × [tex]10^{-4}[/tex] C

Now the capacitance is 40.0 μF,

therefore,

Q’ = CV’ = Q

⇒ V’ = Q’/C’ = Q/C = 1.2 × [tex]10^{-4}[/tex] / 40.0 × [tex]10^{-6}[/tex] = 3.0 V

For similar question on capacitor

https://brainly.com/question/21851402

#SPJ11

The magnitude of the acceleration of the mass is A. 0.224 m/s^2

To find the acceleration of the 20 kg mass, we can use Newton's second law, which states that the net force on an object is equal to the mass of the object multiplied by its acceleration:

Σ[tex]F = ma[/tex]

Where ΣF is the vector sum of all the forces acting on the object.

In this case, we have three forces acting on the mass:

The vector sum of these forces is:

Σ[tex]F = F1 + F2 + F3[/tex]

     [tex]= (3i N) + (5j N) + (i - 3j) N[/tex]

     [tex]= (4i - 2j) N[/tex]

So the net force on the mass is (4i - 2j) N. Now we can use Newton's second law to find the acceleration of the mass:

Σ[tex]F = ma[/tex]

[tex](4i - 2j) N = (20 kg) a \\\\a = \frac{(4i - 2j) N}{20 kg}[/tex]

To find the magnitude of the acceleration, we can use the Pythagorean theorem:

[tex]|a| =\sqrt{(ax)^2 + (ay)^2}[/tex]

where ax and ay are the x and y components of the acceleration vector. In this case, we have:

[tex]ax = \frac{4 N}{20 kg} = 0.2 m/s^2\\\\ay = \frac{-2 N}{20 kg} = -0.1 m/s^2[/tex]

So the magnitude of the acceleration is:

[tex]|a| = \sqrt{(0.2 m/s^2)^2 + (-0.1 m/s^2)^2} \\|a| = \sqrt{0,04 m/s^2 + 0,01 m/s^2}\\|a| = \sqrt{0,05 m/s^2}\\|a| = 0.224 m/s^2[/tex]

Therefore, the answer is A. 0.224 m/s^2.

Learn more about the magnitude of acceleration of object of mass at: https://brainly.in/question/46594241

#SPJ11

To two significant numbers, the cost of electrical energy per kilowatt-hour at this location is roughly 0.072 dollars/kWh.

To start, let's figure out how many kilowatt-hours (kWh) of energy were used:

Convert the time units to hours as follows: 120 minutes / 60 minutes each hour = 2 hours.

Use the following formula to get the energy consumed in kilowatt-hours:

certifies a............... (hours)

Power (kW) is calculated as Voltage (V) x Current (A) / 1000, where 12 V x 15 A / 1000 is 0.18 kW.

Energy (kWh) equals 0.18 kW times two hours, or 0.36 kWh.

Then, using the stated cost of battery charging, we can determine the price of electrical energy per kilowatt-hour:

Price (in dollars) equals 2.6 cents to 0.026 dollars.

Cost per kWh is calculated as Cost/Energy, which is 0.026 dollars/0.36 kWh, or 0.072 dollars/kWh.

Hence, to two significant numbers, the cost of electrical energy per kilowatt-hour at this location is roughly 0.072 dollars/kWh.

Learn more about  the cost of electrical energy per kilowatt-hour here:

https://brainly.com/question/1198770

#SPJ4

Although a lightning rod is designed to carry charge safely to the ground, its primary purpose is to prevent lightning from striking in the first place. This is done by providing a path of least resistance for the lightning to follow, which directs the electrical current away from the building or structure.

The lightning rod, also known as a lightning conductor, is used to protect structures from being damaged by lightning strikes. It works by providing a pathway for the lightning to follow, which directs the electrical current away from the building or structure, and safely to the ground. The rod is typically made of a metal conductor, such as copper or aluminum, and is attached to the roof of the building or structure.

The top of the rod is designed to be pointed, which allows it to attract the electrical charge of a lightning bolt. When the lightning strikes the rod, the electrical charge is then conducted through the rod and safely into the ground, where it is dispersed harmlessly. In this way, the lightning rod is able to prevent lightning from striking the building or structure in the first place.

Learn more about lightning conductor at:

https://brainly.com/question/25923284

#SPJ11

A diver jumps off a diving platform. The following does not explain why the diver accelerates as they fall is i. the momentum of the earth/diver system is conserved.

The second law of motion of Newton, the gravitational force acting on the diver is responsible for the acceleration. The acceleration due to gravity is given by the formula a= 9.8 m/s^2. This means that every second, the velocity of the diver is increasing by 9.8 meters per second (m/s)The correct option is i. The momentum of the earth/diver system is conserved. It is a physical law that states that the momentum of an object is always conserved if the net force applied on the object is zero. It means that momentum can only be transferred from one object to another, and it cannot be created or destroyed.

Since the diver and the earth are a part of the same system, their total momentum will be conserved before and after the dive.The gravitational force exerted by the Earth pulls the diver down, and thus, the diver accelerates towards the ground. The acceleration is due to the gravitational force. So, the option i does not explain why the diver accelerates as they fall.

Learn more about second law of motion at:

https://brainly.com/question/13447525

#SPJ11

Halite and gypsum in beds are examples of chemical sedimentary rocks. They are often found in arid or semi-arid areas where minerals from evaporating saline liquids precipitate.

Common chemical sedimentary rocks include limestone, rock salt, and rock gypsum. When minerals crystallise straight from water, chemical rocks are created.

Gypsum is a soft, pale sedimentary rock that was created during the Silurian Period when Ohio was covered by ancient seas. It can be found as a rock in bedded layers as well as in the mineral form of selenite. Anhydrite and salt (halite, NaCl) are found interspersed with gypsum (CaSO4).

To know more about limestone visit:-

https://brainly.com/question/27974897

#SPJ1

It's likely that the "Blast Off" section will cover a topic connected to space travel, rocket launches, or other space-related activities using a lot of force or energy.

. The description supplied in the choices does not seem to align with the subheading "Blast Off"

That is accurate, indeed. The headline "Blast Off" implies that the part may be connected to space exploration or rocket launches, as was previously suggested, yet the alternatives offered do not seem to fit this theme.

It's also likely that the title "Blast Off" was used more metaphorically than in reference to rocket launches or space travel.

Catchy and attention-grabbing language is frequently used in headlines to persuade people to click and read the story. Instead than implying a direct relationship to space in this instance, "Blast Off" might be used to express excitement or intensity around a specific event or issue.

learn more about  "Blast Off" here:

https://brainly.com/question/29345048

#SPJ4

A disc with a mass of 7.1 kg and a radius of 0.71 m is used to create a torsion pendulum. A force of f = 42. 4 n applied to the disk's edge causes the disc to spin 1/4 turn away from equilibrium. The torsion pendulum has a 12.1 Nm torque.

We use the following equation to get the torque on the torsion pendulum: The formula is: = r F sin(), where is the torque, r is the disk's radius, F is the force acting on the disk's edge, and is the angle at which the disc is rotating.

The values obtained by substituting the supplied values are: = 0.71 m 42.4 N sin(90°/4) 12.1 Nm.

As a result, 12.1 Nm of torque is applied to the torsion pendulum.

In physics, a system is said to be in equilibrium when neither its internal energy state nor its state of motion tend to vary over time.

learn more about equilibrium here:

https://brainly.com/question/30694482

#SPJ4

A. Solid sphere, In comparison to the hoop and cylinder, the solid sphere has the least moment of inertia, which causes the bottom of the ramp to have a higher angular velocity and a higher linear velocity.

This is due to the fact that, among objects of the same mass and radius, the solid sphere has the lowest moment of inertia. With a particular angular velocity, an object's moment of inertia defines how much rotational kinetic energy it contains. The hoop and cylinder will have a smaller linear velocity and a smaller angular velocity when they reach the bottom of the ramp than the solid sphere because they have greater moments of inertia.

The solid sphere will thus be moving at its fastest near the bottom of the slope.

learn more about Solid sphere here:

https://brainly.com/question/22784564

#SPJ4

The frequency that the bad guy hear is 12000 hz when the police car is moving with speed of 80m/s.

For more information on doppler effect kindly visit to

https://brainly.com/question/15318474

#SPJ1

Answer:

6° because some heat is released out of surrounding. if 100 over six which is equal to sixtenn point four