Anybody Understand this question please help me !

Answer:

The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.

The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.

The capacity to react to stimuli is one of the traits of a living thing. The highly developed sensory system of humans can concurrently analyze thousands of incoming messages.

Dendrites of sensory neurons are specialized for receiving particular types of stimuli and are known as sensory receptors. There are three ways to classify sensory receptors.

Exteroceptors are located at or close to the skin's surface and are responsive to stimuli coming from the outside or the body's surface. These receptors include those for vision, hearing, smell, and taste as well as those for touch, pain, and temperature.

Therefore, The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.

To learn more about sensory receptors, refer to the link:

https://brainly.com/question/3190796

#SPJ2

Answer:

[tex]n=0.00259 mol[/tex]

Explanation:

Hello there!

In this case, since the Faraday's constant is 96500 Coulombs per mole, we can set up the following process to obtain the moles in 250 Coulombs:

[tex]n=\frac{250C}{96500C/mol}\\\\n=0.00259 mol[/tex]

Best regards!

A. taste. B. turns. C. react. D. neutr. E. react. Which is t. A. OH. -. B. H2O ... acids are e conjugate. BANK] w.kau.edu.sa. ______ acid-base p a/aasiri2 1 ... Identify th. HCO. A. H2O. B. HCO. C. H2CO. D. PO4. 3. E. none. Identify th ... (aq) + HCN(aq) → H2O(aq) + CN. -. (aq). D. HCN(aq) + CH3NH2(aq) → CH3NH3. +. (aq)+ CN.

Answer:26.9

Explanation:

Answer:

HPRT

Explanation:

HPRT catalyzes the salvage reactions of hypoxanthine and guanine with PRPP to form IMP and GMP

The formation of GMP from IMP requires oxidation at C-2 of the purine ring, followed by a glutamine-dependent amidotransferase reaction that replaces the oxygen on C-2 with an amino group to yield 2-amino,6-oxy purine nucleoside monophosphate, or as this compound is commonly known, guanosine monophosphate.

Answer:

-0.0132 atm

Explanation:

Step 1: Calculate the atmospheric pressure change if altitude increases 100. m

Atmospheric pressure decreases by 1.00 mmHg as altitude increases 10.0 m. The decrease in pressure when the altitude increases 100. m is:

100. m × (-1.00 mmHg/10.0 m) = -10.0 mmHg

Step 2: Convert "-10.0 mmHg" to atm

We will use the conversion factor 1 atm = 760 mmHg.

-10.0 mmHg × 1 atm/760 mmHg = -0.0132 atm

Answer:

0.445 M

Explanation:

Molarity = moles/Volume

M = 9.95/22.35 = 0.445 M

Answer:

0.0313 mole.

Explanation:

From the question given above, the following data were obtained:

Volume of solution = 125 mL

Molarity of NaNO₃ = 0.25 M

Number of mole of NaNO₃ =?

Next, we shall convert 125 mL to litre (L). This can be obtained as follow:

1000 mL = 1 L

Therefore,

125 mL = 125 mL × 1 L / 1000 mL

125 mL = 0.125 L

Thus, 125 mL is equivalent to 0.125 L.

Finally, we shall determine the number of mole of NaNO₃ in the solution. This can be obtained as follow:

Volume of solution = 0.125 L.

Molarity of NaNO₃ = 0.25 M

Number of mole of NaNO₃ =?

Molarity = mole / Volume

0.25 = mole of NaNO₃ / 0.125

Cross multiply

Mole of NaNO₃ = 0.25 × 0.125

Mole of NaNO₃ = 0.0313 mole.

Answer:

a. pH = 7.0

b. pH = 12.52

c. pH = 12.70

d. pH = 12.78

Explanation:

a. Deionized water has the [H⁺] of pure water = 1x10⁻⁷ (Kw = 1x10⁻¹⁴ = [H⁺][OH⁻] - [H⁺] = [OH⁻ -)

pH = -log[H⁺] = 7

b. Moles NaOH = 5x10⁻³L * (0.10mol / L) = 5x10⁻⁴moles OH⁻ / 0.015L = 0.0333M = [OH⁻]

-Total volume = 10mL+5mL = 15mL = 0.015L

pOH = -log[OH⁻] = 1.48

pH = 14-pOH

pH = 12.52

c. Moles NaOH = 0.010L * (0.10mol / L) = 1x10⁻³moles OH⁻ / 0.020L = 0.0500M = [OH⁻]

-Total volume = 10mL+10mL = 20mL = 0.020L

pOH = -log[OH⁻] = 1.30

pH = 14-pOH

pH = 12.70

d. Moles NaOH = 0.015L * (0.10mol / L) = 1.5x10⁻³moles OH⁻ / 0.025L = 0.060M = [OH⁻]

-Total volume = 10mL+15mL = 25mL = 0.025L

pOH = -log[OH⁻] = 1.22

pH = 14-pOH

pH = 12.78

Answer:

N

Explanation:

Electronegativity increases as you move from left to right across a period, and decreases as you move down the groups.

Answer:

N .. ........................

Answer:

C. soluble

Explanation:

Remember that a substance that dissolves in a solvent is said to be soluble in that solvent. A substance that does not dissolve in a solvent is insoluble. Process of Dissolving: Solvent particles surround solute particles to form a solution in a process called solvation.

Answer: The correct option is C.

Phosphorus has no atmospheric component.

Explanation:

This is because, phosphorus is not in gaseous state but it is liquid at normal temperature, therefore it cannot be found in the air. It is cycle through water,soil or sediments. The major source of phosphorus in the phosphorus cycle is the rock. Rock contain phosphorus and phosphorus I'd gotten from rocks through weathering. Weathering is the disintegration of rocks into sediments or smaller particles. This is released into the soil after weathering.

Answer:

form

Explanation:

Answer:

Option b is show the chemical property of sodium....

Its the warm air what helps them also of energy of the sun

Answer:

If a pure compound is distilled, the temperature of the head will be compared to the temperature of the pot. However, if there is an impurity present that strongly interacts with the molecules of the liquid, then the temperature must be increased to increase the vapor pressure of the liquid, eventually to atmospheric pressure, allowing the liquid to boil. Therefore, at the boiling point, the temperature of the pot will be higher than the temperature of the head.

Explanation:

when temperatures increase, pressures also do so, thus reaching boiling points where liquid states become gaseous.

We inherit genes from our biological parents in specific ways. One way is called autosomal dominant inheritance.

What is autosomal dominant inheritance?

Autosomal dominant inheritance means that the gene in question is located on one of the autosomes. These are numbered pairs of chromosomes, 1 through 22. (These chromosomes do not determine an offspring's gender.) Dominant means that only one gene from one parent is necessary to pass down a trait or a disorder. When a parent has a dominant trait or disorder, there is a 50 percent chance that any child he or she has will also inherit the trait or disorder:

Genetic illustration demonstrating autosomal dominant inheritance

Click Image to Enlarge

What is Marfan syndrome?

Marfan syndrome occurs in one of 5,000 live births. It is a connective tissue disorder associated with autosomal dominant inheritance. Connective tissue is abundant in the body and is important as a supporting structure. It is especially important for the musculoskeletal system. It also provides support for other body systems as well, including the eyes and the heart. The gene for Marfan syndrome is called fibrillin-1. This gene is localized to chromosome #15 on the long arm (q) at 15q21.1.  

Common findings in individuals with Marfan syndrome include those related to connective tissue disorders. These include abnormal enlargement of the aortic root of the heart, dislocated lenses of the eyes, and a tall, lanky body with increased joint mobility, scoliosis, long flat feet, and long fingers. Findings may vary among individuals diagnosed with this condition, even within a family.

If an individual carries an abnormal gene for Marfan syndrome, that individual has a 50 percent risk of passing down the disorder to each future offspring. If a person does not carry the gene abnormality, then the risk for occurrence of the disorder in future offspring is the same as for the general population.

Explanation:

Answer: 125.0964 g

Explanation:

Density = mass/volume

Density = 2.7 gcm-3

Volume = 2.7*14.3 = 46.332

Mass=?

Mass= density*volume

= 2.7 x 46.332 = 125.0964 g

Hope this helps! :)

Answer:

240.17 g Ba3(PO4)2

Explanation:

1. Determine the limiting reactant.

2H3PO4 + 3Ba(OH)2 --> Ba3(PO4)2 + 6H2O

moles H3PO4 = M x V = 3 x 0.286 = .858 moles H3PO4

moles Ba(OH)2 = M x V = 1.4 x 0.855 = 1.197 moles Ba(OH)2

ratio Ba(OH)2 : H3PO4 = 1.197: .858 = 1.39: 1

stoichiometric ratio Ba(OH)2 : H3PO4  = 3:2

Ba(OH)2is the limiting reactant

MM Ba3(PO4)2 = 601.92 g/mol

g Ba3(PO4)2 = moles Ba(OH)2 x(1 mol Ba3(PO4)2/3 moles Ba(OH)2) x (MM Ba3(PO4)2/ 1mol Ba3(PO4)2) = 1.197 x 1/3 x 601.92 = 240.17 g Ba3(PO4)2

Answer:

Explanation:

We shall find volume of gas at NTP or at 273 K , 760 mm of Hg .

Pressure of given gas = 1.06 x 760 mm of Hg less vapor pressure of water .

= 805.6 - 23.76 = 781.84 mm of Hg

For it we use gas law formula ,

P₁V₁ / T₁ = P₂V₂ / T₂

781.84 x 136.1 / ( 273 + 25 ) = 760 x V₂ / 273

= 128.26 mL .

= 128.26  x 10⁻³ L .

22.4 L of oxygen will have mass of 32 g

128.26 x 10⁻³ L of oxygen will have mass of 32 x 128.26 x 10⁻³ / 22.4 g

= 183.22 mg .

Explanation:

The scientific method involves making observations and asking questions. Scientists form hypotheses based on these observations and then develop controlled experiments to collecting and analyze data. Using this data, they are able to draw conclusions and form questions for new scientific research.

:)ᴍᴀʀᴋ ᴀꜱ ʙʀᴀɪɴʟɪꜱᴛ

Answer:

a13+a13

Explanation:

Answer:

Mg₃N₂  +  4 H₂SO₄  ⇒  3 MgSO₄  +   (NH₄)₂SO₄

Explanation:

To balance an equation, you need to make both sides of the equation have equal number of each element.  Also, I think that you didn't write the whole equation since the reaction you gave is not likely.

Mg₃N₂  +  4 H₂SO₄  ⇒  3 MgSO₄  +   (NH₄)₂SO₄

Answer:

I believe it is 5.00

Explanation: