We can use the formula for angular deceleration to find the time interval needed for the wheel to come to a complete stop:
α = (ωf - ωo) / Δt
where ωf is the final angular velocity, ωo is the initial angular velocity, and Δt is the time interval. Rearranging the formula, we get:
Δt = (ωf - ωo) / α
Since the wheel comes to a complete stop, the final angular velocity is zero:
ωf = 0
Substituting the given values, we get:
Δt = (0 - 34.28) / (-1.77) ≈ 19.37 s
What is the r total angular distance traveled?The formula for angular displacement is:
θ = ωo t + (1/2) α t^2
where θ is the angular displacement, ωo is the initial angular velocity, α is the angular acceleration, and t is the time interval. When the wheel comes to a complete stop, the final angular velocity is zero, so the formula simplifies to:
θ = ωo t + (1/2) α t^2
Substituting the given values, we get:
θ = (34.28 rad/s)(19.37 s) + (1/2)(-1.77 rad/s^2)(19.37 s)^2 ≈ -2003.9 rad
The negative sign indicates that the wheel has rotated in the opposite direction of its initial motion.
To get the total angular distance traveled by the wheel during this time interval, we take the absolute value of θ:
|θ| = |-2003.9 rad| = 2003.9 rad
Learn more about angular distance from
https://brainly.com/question/25648667
#SPJ1
This hair-dryer has a plastic case. It is connected to a mains socket by a 3-pin plug.
The cable connecting the hair-dryer to the plug contains only two wires.
Write down the colour of the insulation on the wires.
Wire 1
Wire 2
(ii)
Which of the usual three wires is not needed?
=
This hair-dryer is safe to use without the third wire. Explain why.
Wire 1 and Wire 2 are typically insulated with one of three standard colors: black, white, or red.
The wire that is not needed is the earth wire, which is typically green or yellow with green stripes. The earth wire is used for safety purposes to provide a path for current to flow to the ground in case of a fault or short circuit, but is not strictly necessary for the operation of the hair-dryer.
The hair-dryer is safe to use without the earth wire because it is double-insulated. This means that the hair-dryer has two layers of insulation between the live and neutral wires and the outer casing, which provides an extra level of protection against electrical shocks. Double-insulated appliances are designed to operate safely without the need for an earth wire, and are marked with a symbol consisting of a square inside another square to indicate this.
What is an earth wire?
An earth wire, also known as a ground wire or protective earth (PE) wire, is a safety wire used in electrical wiring systems. It is designed to provide a path for electrical current to flow to the ground in the event of an electrical fault, such as a short circuit or a surge.
To know more about hair-dryer. visit:
https://brainly.com/question/29086609
#SPJ1
fter sailing 12 mi, a sailor changed direction and increased the boat's speed by 2 mph. An additional 15 mi was sailed at the increased speed. The total sailing time was 3 h. Find the rate of the boat for the first 12 mi.
The rate of the boat for the first 12 miles is 24/13 mph.
After sailing 12 miles, a sailor changed direction and increased the boat's speed by 2 mph. An additional 15 miles was sailed at the increased speed. The total sailing time was 3 hours.
We need to find the rate of the boat for the first 12 miles.Let the rate of the boat for the first 12 miles be r mph. Therefore, the speed of the boat after the change of direction is (r + 2) mph.
Distance covered in the first 12 miles = 12 miles
Time taken for the first 12 miles = 12/r
Distance covered in the next 15 miles = 15 miles
Time taken for the next 15 miles = 15/(r + 2)
Total time taken = 3 hours
Therefore,12/r + 15/(r + 2) = 3
Multiply the above equation by r(r + 2), we get:
12(r + 2) + 15r = 3r(r + 2)
Simplify and solve for r:
r = 24/13 mph
for such more question on rate
https://brainly.com/question/29415701
#SPJ11
Using KCL and the v-i relations for resistors and capacitors, show that the voltage v(t) in the following circuit satisfies the following ODE if R= 5Ω and C-2F. Also find the capacitor voltage v (t) if is(t) = cos (t). Assume zero initial conditions. u 2 u(t) = is(t) for t > 0. dt 5
The complete solution to the ODE is given as:V(t) = (1/2C) sin(t) + KV(t) = (1/2) sin(t) + C1
The given circuit diagram can be represented in a linear circuit. Thus, using KCL (Kirchoff's Current Law) and the v-i relation for resistors and capacitors, the voltage V(t) can be found out to satisfy the following ODE.R = 5Ω and C = 2F, thus I = C * (dv/dt). Also, V = iR + Q/C, where Q is the charge stored in the capacitor. Hence, the voltage across the capacitor is given as:
V = iR + Q/CI = is(t)/2
Since initial conditions are zero, Q = 0.
Hence, the ODE of the circuit will be:
V = (1/2C) ∫ is(t)dt Or, V = (1/2C) sin(t) + K
Here, K is the constant of integration.
To find the voltage of the capacitor, we need to use the relation between current and voltage across the capacitor, given as: iC = C * dv/dt
Thus, dv/dt = iC/C = i, since C = 2FThus, v(t) = (1/C) ∫ i(t) dt Or, v(t) = (1/2) ∫ cos(t)dt Or, v(t) = (1/2) sin(t) + C1Here, C1 is the constant of integration. Thus, the voltage V(t) in the circuit is given as:V(t) = (1/2C) sin(t) + KVoltage of the capacitor is given as:
v(t) = (1/2) sin(t) + C1
To learn more about ODE :
https://brainly.com/question/25731911
#SPJ11
In the circuit in the figure, a 20-ohm resistor sits inside 104 g of pure water that is surrounded by insulating Styrofoam.
If the water is initially at temperature 11.8 C, how long will it take for its temperature to rise to 57.1 C?
Use 4190 J/kg.C as the heat capacity of water, and express your answer in seconds using three significant figures.
The time taken for the water to raise its temperature from 11.8[tex]C^o[/tex] to 57.1[tex]C^o[/tex] is 987 s.
[tex]t = \frac{mc(\theta_1 - \theta_2)}{I^2R_1}\\= \frac{(0.104kg)(4190/kg.C^o [(5.71C^o) - (11.8C^o)])}{(1.0A)^2(20.0)}[/tex]
=987s
Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a way of measuring how hot or cold something is. The unit of measurement for temperature is typically degrees Celsius (°C) or Fahrenheit (°F), although other units such as Kelvin (K) may also be used.
Temperature plays a critical role in many physical and chemical processes, from the behavior of gases to the functioning of the human body. In general, higher temperatures increase the speed of molecular motion, leading to faster reactions, greater energy transfer, and increased expansion or contraction of materials. Lower temperatures, on the other hand, tend to slow down molecular motion and decrease reaction rates, energy transfer, and material expansion.
To learn more about Temperature visit here:
brainly.com/question/14272282
#SPJ4
Which of the following techniques is the key factor in a telescope that uses adaptive optics to correct for atmospheric distortion of images, or seeing? O Computer-controlled motors rapidly adjust the orientation and position of the separate primary mirrors in a multiple-mirror telescope (MMT). O A corrector lens compensates for image distortion by electronic control of its shape. O Computer-controlled motors adjust the position and shape of one of the small mirrors within the optics many times per second. The light rays are focused electronically, without the use of lenses or mirrors.
The technique that is the key factor in a telescope that uses adaptive optics to correct for atmospheric distortion of images, or seeing is: Computer-controlled motors adjust the position and shape of one of the small mirrors within the optics many times per second.
Adaptive optics is a technology used to improve the performance of optical systems by reducing the effect of wavefront distortions by adjusting for distortions in real-time. Adaptive optics compensate for these distortions by removing the wavefront distortion from the incoming light and returning an undistorted image to the detector. This technique is especially helpful for telescopes that use optics to observe astronomical objects.
In a telescope, Adaptive optics involves two main components:
a wavefront sensor and a wavefront corrector. The wavefront sensor measures the wavefront distortion and sends this information to the wavefront corrector, which changes its shape to correct for the distortion.The technique that is the key factor in a telescope that uses adaptive optics to correct for atmospheric distortion of images, or seeing is Computer-controlled motors adjust the position and shape of one of the small mirrors within the optics many times per second.
for such more question on technique
https://brainly.com/question/12601776
#SPJ11
If pulse 1 were reflected from a wall, which one of the patterns above would represent the reflected pulse? A) 1 B) 2 C) 3 D) 4 E) 5
If pulse 1 is reflected from a wall, pattern 2 would represent the reflected pulse. This is because when a wave is reflected from a fixed end, its amplitude is inverted. So, pattern 2 represents the reflection of pulse 1 from a fixed end.
A pulse is a short burst of energy that travels through space or matter. These bursts of energy can come in many different forms, including sound waves, light waves, and even electromagnetic radiation. In the context of waves, a pulse refers to a single disturbance that propagates through a medium. The reflection of waves refers to the behavior of waves that encounter a barrier or a discontinuity in a medium that causes them to return to their original medium. When waves are reflected, their direction of motion changes, and they experience a change in amplitude, phase, and polarization.
The amplitude of the reflected wave is related to the amplitude of the incident wave, as well as to the reflectivity of the medium. The reflection of waves is an essential phenomenon in many fields of science and engineering. For example, it is essential in optics, where it is used to form images in mirrors and lenses. It is also important in acoustics, where it is used to analyze the characteristics of sound waves. In addition, the reflection of waves is a critical aspect of the design of structures such as bridges and buildings, where it can help to reduce the impact of seismic waves during an earthquake.
To learn more about Amplitude ;
https://brainly.com/question/3613222
#SPJ11
Difference between capillary action and siphoning action?
Explanation:
Capillary action and siphoning action are two different phenomena that involve the movement of fluids, but they work in different ways.
Capillary action refers to the movement of a liquid along a narrow tube or capillary due to the adhesive and cohesive properties of the liquid. This happens because the liquid molecules are attracted to the walls of the capillary, which creates a meniscus that draws the liquid up the tube. The height that the liquid rises in the capillary depends on the surface tension and the diameter of the capillary.
Siphoning action, on the other hand, is the movement of a liquid from a higher point to a lower point through a tube or hose. This happens due to the force of gravity and the difference in pressure between the two ends of the tube. The liquid flows from the higher end to the lower end because of the pressure difference, with atmospheric pressure pushing the liquid up the tube on the higher end and gravity pulling it down on the lower end.
Explanation:
Capillary action and siphoning action are both related to the movement of fluids, but they differ in their mechanisms and applications.
Capillary action refers to the ability of a liquid to flow in narrow spaces or tubes, such as capillary tubes or small pores. This is due to the cohesive forces between the liquid molecules, which cause them to adhere to the walls of the container and rise up the tube. The thinner the tube, the higher the liquid can rise. Capillary action is responsible for many natural phenomena, such as the movement of water through plants and the formation of meniscus in a test tube.
On the other hand, siphoning action refers to the transfer of a liquid from one container to another by means of a tube. This is due to the difference in pressure between the two containers, which causes the liquid to flow from the higher container to the lower container through the tube. Siphoning action can be initiated by creating a vacuum in the tube, either by sucking on it or by using a pump. Siphoning action is often used in practical applications, such as transferring fuel or other liquids from one container to another.
In summary, capillary action is the movement of a liquid within a confined space due to cohesive forces, while siphoning action is the transfer of a liquid from one container to another due to pressure differences.
Eating disorders that go untreated can lead to serious illness, unhappiness, depression, and even death.
A.
True
B.
False
A. Eating disorders that go untreated can lead to serious illness, unhappiness, depression, and even death is True.
Eating disorders such as anorexia, bulimia, and binge-eating disorder can have serious psychological consequences if left untreated.
What is depression?
Depression is a mental health disorder characterized by persistent feelings of sadness, hopelessness, and a loss of interest in activities that were once enjoyable. It can affect a person's thoughts, emotions, behavior, and overall physical well-being.
What is anorexia?
Anorexia, also known as anorexia nervosa, is a serious eating disorder characterized by a persistent restriction of food intake, an intense fear of gaining weight, and a distorted body image. People with anorexia often have an extremely low body weight and may engage in behaviors such as excessive exercise, the use of laxatives to lose weight.
To know more about depression, visit:
https://brainly.com/question/28810167
#SPJ1
Complete question is: Eating disorders that go untreated can lead to serious illness, unhappiness, depression, and even death is True.
true/false.if you were standing directly at the earth's north magnetic pole, in what directino would a compass point if it were free to swivel in any direction
True. The compass would point south, towards the Magnetic South Pole, if it were free to swivel in any direction.
If you were standing directly at the Earth's North Magnetic Pole, a compass would point towards the Magnetic South Pole. A compass is a simple instrument used to determine direction. It is based on the principle that Earth has a magnetic field that attracts certain metals, such as iron. The needle on a compass is a small magnet that is suspended so that it can rotate freely. When the compass is held level, the needle is able to rotate until it comes to rest along the magnetic lines of force, indicating the direction of the magnetic north. However, the magnetic North Pole is not the same as the geographic North Pole, which is the point where the Earth's axis of rotation intersects with the surface of the planet.
The Earth's magnetic field is generated by the motion of molten iron in the outer core. As a result, the magnetic field is not perfectly aligned with the axis of rotation. It is tilted at an angle of approximately 11.5 degrees. This means that the magnetic North Pole is not located at the same point as the geographic North Pole. If you were standing directly at the Earth's North Magnetic Pole, a compass would point towards the Magnetic South Pole. This is because the North and South Poles of a magnet are opposite. When the north-seeking pole of a compass needle is placed near the North Magnetic Pole, it will be attracted to the south-seeking pole of the Earth's magnetic field, which is located in the vicinity of the Magnetic South Pole.
To learn more about Magnetic South Pole ;
https://brainly.com/question/30221661
#SPJ11
Which correctly describes a different evolutionary stage of a star like the sun?
A) it’s forms from a cold, dusty molecular cloud
B) During a yellow giant stage, it burns carbon in its core and helium in the shell surrounding the core.
C) After leaving the main sequence, its core is stable due to electron degeneracy
D) It becomes a white dwarf after exploding as a supernova
E)During a red giant stage, its core contracts and cools
Answer:
Explanation:
The correct option that describes a different evolutionary stage of a star like the sun is:
D) It becomes a white dwarf after exploding as a supernova
This is because a star like the sun does not have enough mass to undergo a supernova explosion. After it has exhausted all the fuel in its core, it will evolve into a red giant and then a planetary nebula, leaving behind a small, hot, dense remnant known as a white dwarf. Supernovae occur in much more massive stars that have cores that can collapse to form a neutron star or black hole.
P2. Charges q and Q are placed on the x-y plane at (0,0) and at (0, 3) m, respectively.
Where q = 50 pC and Q = -40 pC.
a. Draw the situation to solve the next step.
b. Determine the net electric flux through a closed cylindrical surface that has a diameter of 5 ma
a height of 4 m, where the axis of the cylinder is the z axis and its mid-point is at the origin.
(a). Here is a diagram of the situation:
| Q (-40 pC)
| ^
| |
--------|----------- 3 m
| |
| |
| |
| |
| |
| q (50 pC)
|_____________|___________> x = 0 m
3 m
(b). The net electric flux through the closed cylindrical surface is -100.5 N m^2/C.
We can use Gauss's Law to calculate the electric flux through the cylindrical surface.
Choose a cylindrical Gaussian surface of radius r=2.5 m and height h=4 m, centered at the origin.The electric field at any point on the cylindrical surface due to Q is given by E_Q = kQ/r^2, where k is Coulomb's constant (9 x 10^9 N m^2/C^2).The electric field at any point on the cylindrical surface due to q is given by E_q = kq/r^2.The net electric field at any point on the cylindrical surface is E_net = E_Q + E_q.Since the surface is symmetric around the z-axis, we can assume that the electric field is perpendicular to the end surfaces of the cylinder, so the electric flux through these surfaces is zero.Therefore, the net electric flux through the cylindrical surface is Φ_E = E_net * A, where A is the area of the curved surface of the cylinder.The area of the curved surface of the cylinder is A = 2πrh = 20π m^2.Substituting the values for E_Q and E_q, we get E_net = -1.60 x 10^6 N/C (negative because the electric field due to Q is in the opposite direction to that due to q).Therefore, Φ_E = (-1.60 x 10^6 N/C) * (20π m^2) = -100.5 x 10^6 N m^2/C = -100.5 N m^2/C.Therefore, the net electric flux through the closed cylindrical surface is -100.5 N m^2/C.
What is an electric flux?
Electric flux is the measure of the total electric field passing through a surface. It is a scalar quantity, and its unit is the volt meter (V m) or newton meter squared per coulomb (N m^2/C).
To know more about gauss's law,visit:
https://brainly.com/question/16735321
#SPJ1
by how much should lower the pressure at the top of the straw to have the lemonade rise 5 cm above the surface
The lemonade rise 5 cm above the surface, you must lower the pressure at the top of the straw by [tex]49 N/m^2[/tex] (or Pascals).
Let's assume that atmospheric pressure is 1 atm, and we want to raise the water to a height of 5 cm. Pressure in a fluid increases with depth, and the pressure at the bottom of the fluid is greater than the pressure at the top. Consider a horizontal straw filled with water that is open at both ends.
The pressure of the water in the straw is determined by atmospheric pressure at the open end of the straw. At the bottom of the straw, the pressure is the same as the pressure of the surrounding water (P0).
Let us consider a horizontal straw in which the water level rises to a height of 5 cm above the surrounding water when the pressure at the top of the straw is lowered by an amount of P.
As a result, the pressure of the water at the top of the straw is now (P + 1 atm), and the pressure at the bottom of the straw is (P0 + P).
Because the pressure at the bottom of the straw (P0 + P) is equal to the pressure of the surrounding water (P0), we have:
P0 + P = P0 + ρgh.
Solving for P, we get:
P = ρgh
In this case, h = 5 cm,
ρ is the density of lemonade, and
g is the acceleration due to gravity.
The value of g is [tex]9.8 m/s^2[/tex] on average.
[tex]ρgh = (1000 kg/m^3) × (9.8 m/s^2) × (0.05 m) = 49 N/m^2[/tex] (or Pascals).
So, to have the lemonade rise 5 cm above the surface, you must lower the pressure at the top of the straw by [tex]49 N/m^2[/tex] (or Pascals).
for such more question on pressure
https://brainly.com/question/28012687
#SPJ11
Two identical projectiles are fired at the same time. Projectile A has a speed of 300m/s and projectile B has a speed of 600m/s. What is the ratio of the Kinetic Energy of projectile B to projectile A?
The ratio of the kinetic energy of projectile B to projectile A is 4:1.
The kinetic energy (KE) of an object is given by the formula
KE = 1/2 * m * v^2
where m is the mass of the object and v is its velocity.
Assuming the two projectiles have the same mass, we can compare their kinetic energies based solely on their velocities:
KE_B/KE_A = (1/2 * m * v_B^2)/(1/2 * m * v_A^2)
= (v_B^2/v_A^2)
Substituting the values given in the problem:
KE_B/KE_A = (600 m/s)^2 / (300 m/s)^2
= 4
Therefore, the ratio of the kinetic energy of projectile B to projectile A is 4:1. Projectile B has four times the kinetic energy of projectile A.
What is kinetic energy?
Kinetic energy is the energy an object possesses by virtue of its motion. It is a scalar quantity that depends on the mass and velocity of the object.
To know more about kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ1
if the mass of a cart is quickly loaded to have twice the mass while a propelling force remains constant, the cart's acceleration
The mass of a cart is quickly loaded to have twice the mass while a propelling force remains constant, the cart's acceleration is halved due to the inverse proportionality of mass and acceleration.
When the mass of a cart is quickly loaded to have twice the mass while a propelling force remains constant, the cart's acceleration is halved. The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. This is because force equals mass times acceleration (F=ma). When the mass of the cart is doubled, the net force on the cart remains the same, but the mass increases, causing the acceleration to decrease by half. This is due to the fact that the same force must now accelerate twice the mass, resulting in a lower acceleration. This is known as inverse proportionality; as one quantity doubles, the other quantity is halved.
To learn more about Acceleration :
https://brainly.com/question/460763
#SPJ11
a 504 g mass oscillates with an amplitude of 12.0 cm on a spring whose spring constant is 20.0 n/m .
The period of oscillation is approximately 0.998 seconds.
StepsWe can use the following formula to find the period of oscillation:
T = 2π√(m/k)
where T is the period, m is the mass, and k is the spring constant.
Substituting the given values, we get:
T = 2π√(0.504 kg / 20.0 N/m)
T = 2π√(0.0252 kg/m)
T = 2π * 0.1589 s
T = 0.998 s (rounded to three significant figures)
Therefore, the period of oscillation is approximately 0.998 seconds.
The force needed to stretch or compress a spring by a specific amount is known as the spring constant (k), which serves as a gauge for a spring's stiffness. In the SI system, the spring constant is measured in Newtons per meter (N/m).
For example, if a spring requires a force of 10 N to stretch it by 0.5 meters, then the spring constant is:
k = F/x = 10 N / 0.5 m = 20 N/m
In many computations involving elastic systems, such as the oscillation of a mass on a spring or the compression of a spring in a mechanical system, the spring constant, a crucial spring parameter, is taken into account.
learn more about mass here
https://brainly.com/question/19385703
#SPJ1
Adult brains are not capable of neurogenesiss . True False
Answer:
False. Adult brains are capable of neurogenesis, which is the process of generating new neurons (nerve cells) in the brain. Although it was previously believed that neurogenesis only occurred during early development, research has shown that certain regions of the brain, such as the hippocampus, continue to produce new neurons throughout adulthood. However, the rate of neurogenesis in adults is much lower than in developing brains
EX :SOMEONE FATHER TODAY YOUR FATHER DOES,T KNOW ABOUT TECH OR ANY SAMRT APPS BUT HE KNOW BETTER N HIS GENRATON
Question 1
11) You are driving a vehicle at 55 mph on dry pavement, about how much total stopping distance do you need
to bring it to a stop?
The total stopping distance required to bring it to a stop is 300 metres.
What exactly is stopping distance?
The stopping distance is the distance travelled between the time a moving vehicle's body decides to stop and the time the vehicle completely stops.
Bringing a moving vehicle to a stop involves three critical factors.
1.Distance of perception
2. Distance between reactions
3.Distance between the brakes
1. Perception distance is the amount of time that a vehicle travels while your brain perceives the need to apply the brakes.
An alert driver must react in about 0.75 seconds. This time represents approximately 60 feet of travel.
2. Reaction distance is the distance travelled before the driver applies the brakes. This takes about 0.75 seconds for a cautious
driver. This adds an additional 60 feet of travel.
3. Braking distance is the distance travelled by a vehicle before coming to a complete stop on dry ground. This distance is longer on slick ground (after snow or rain). The skidding distance on dry ground is approximately 170 feet.
This means that a cautious driver needs 60+60+170 = 290 feet (approximately 300 feet) to come to a complete stop.
To know more about stopping distance
brainly.com/question/26711747
#SPJ1
The definition of the unit of current, the Ampere,is based on A. The force per unit length on a conductor in a uniform magnetic field B. The force per unit length on parallel current carrying conductors C. The charge per unit time delivered by a cell of e.m.f 1.0 V D. The charge passing a point per unit time in electrical current
Answer: D
Explanation:
is the equation a=v^2/r dimensionally correct?
Answer:
No, the equation a=v^2/r is not dimensionally correct. This can be seen by breaking down the dimensions of each term in the equation.
The dimension of acceleration (a) is length/time^2 (L/T^2).
The dimension of velocity (v) is length/time (L/T).
The dimension of radius (r) is length (L).
Substituting these dimensions into the equation, we get:
L/T^2 = (L/T)^2 / L
Simplifying this expression, we get:
L/T^2 = L/T^2
This means that the dimensions on both sides of the equation are equal and therefore the equation is dimensionally correct.
Answer:
Yes, the equation a=v^2/r is dimensionally correct.
Explanation:
The dimensions of acceleration (a) are distance/time^2, the dimensions of velocity (v) are distance/time, and the dimensions of radius (r) are distance.
When we substitute these dimensions into the equation a=v^2/r, we get:
a = (distance/time)^2 / distance
Simplifying, we get:
a = distance^2 / time^2 / distance
a = 1 / time^2
Therefore, the dimensions of both sides of the equation are the same, which confirms that the equation is dimensionally correct.
Determine the magnitude of force at the pin A and in the cable BC needed to support the 500-lb load. Neglect the weight of the boom AB
The magnitude of the force at pin A and in cable BC needed to support the 500-lb load is 2,000 lbs, since the cable BC supports 1/4 of the load. The force in the cable is transferred to the pin A and distributed along the boom AB. The weight of the boom AB can be neglected in this calculation.
Load = 500 lb Boom AB = Neglected To determine :Magnitude of force at the pin A and in the cable BC needed to support the 500-lb load Formula used:ΣFx = 0ΣFy = 0
Considering point AΣFy = 0ΣFy = Ay - 500Ay = 500 lb Considering point CΣFx = 0∴T cos 45° = 0T = 0 lbΣFy = 0∴T sin 45° - B = 0B = T sin 45°B = T / √2By substituting the value of T in the above equation we get B = 0 lb Therefore, force required at pin A is 500 lb and force required in the cable BC is 0 lb to support the 500-lb load.
For more such questions on force
https://brainly.com/question/29875769
#SPJ11
A ski resort can manufacture enough machine made snow in 4 h to open its steepest run, whereas it would take 12 h of naturally falling snow to provide enough snow. If the resort makes snow while it is snowing naturally, how long (in h) will it take until the run can open?
The run will be able to open in 4 hours when machine-made snow is produced while it is snowing naturally.
Let the rate of production of machine-made snow be m units/hour, and the rate of snowfall be n units/hour. From the given information, we know that:
m × 4 = n × 12 => m/n = 3/1
Let the time taken for the run to open when both types of snow are produced simultaneously be t hours.
In that time, the ski resort will have produced mt units of machine-made snow and nt units of naturally falling snow.
We also know that mt + nt is equal to the amount of snow required to open the run. Therefore:
mt + nt = m × 4 => nt = m(4 - t) (1) and
mt + nt = n × t => mt = n(t - 12) (2)
Substituting the value of m/n obtained above in (1), we have:
nt = 3n(4 - t) => nt = 12n - 3nt => nt = 6n (3)
Substituting the value of mt obtained above in (2), we have:
n(t - 12) = 3nt => t = 4 hours
for such more question on run
https://brainly.com/question/16843293
#SPJ11
5. In the diagram below, Aircraft A is flying East and maintaining a groundspeed of 340 kt (a kt = speed of 1 NM / hr). Aircraft B is flying in the same direction as aircraft A but 210 NM ahead, maintaining a ground speed of 280 kt. Aircraft A will catch Aircraft B at Point ‘X’. What distance will Aircraft B have travelled when this event occurs?
Aircraft B will have travelled 980 NM when it is caught up by Aircraft A.
We can begin by using the formula:
distance = rate × time
Let's first find the time it will take for Aircraft A to catch up with Aircraft B. Since both are flying in the same direction, the relative speed between them will be the difference in their ground speeds:
relative speed = ground speed of A - ground speed of B
= 340 kt - 280 kt
= 60 kt
The distance between the two aircraft is 210 NM. Using the relative speed, we can find the time it will take for Aircraft A to catch up to Aircraft B:
time = distance / relative speed
= 210 NM / 60 kt
= 3.5 hours
Now, we can find how far Aircraft B will have travelled in 3.5 hours at its own ground speed of 280 kt:
distance = rate × time
= 280 kt × 3.5 hours
= 980 NM
Therefore, Aircraft B will have travelled 980 NM when it is caught up by Aircraft A.
What is an aircraft?
An aircraft is a machine that is designed to be able to fly through the air. It typically has fixed or rotary wings, and is powered by engines or other propulsion systems. Aircraft come in a wide variety of shapes and sizes, from small, single-engine planes to large commercial airliners and military aircraft.
To know more about aircraft, viist:
https://brainly.com/question/4932618
#SPJ1
a motor uses kn of force to power a vehicle that has a top speed of m/s. what is the power delivered by the motor? round answers to one decimal place.
A motor uses kn of force to power a vehicle that has a top speed of m/s. The power delivered by the motor is 9.8 kW (kilowatts).
To compute the power delivered by the motor, use the following formula:
P = Fv
Where:
P is the power delivered by the motor
F is the force exerted by the motor
v is the velocity at which the motor delivers the force
First, convert the force from kN to N by multiplying it by 1000 kN = 1000 N.
Now we can substitute the values in the formula:
P = 1000 N × m/sP = 1000 Nm/s
To convert Newton-meter to watts, divide it by the conversion factor 1 W = 1 J/s.
So:P = 1000 Nm/s / 1 WP = 1000 W
To convert watts to kilowatts, divide it by 1000. So:
P = 1000 W / 1000P = 1 kW
The power delivered by the motor is 1 kW.
Rounding it to one decimal place:
P = 1.0 kW
for such more question on power delivered
https://brainly.com/question/17162287
#SPJ11
If the pressure exerted on the floor by a box is 200kpa, find the weight of the box given that the bottom of the box has a contact area of 20cm³?
The weight of the box is approximately 0.0408 kg.
What is Pressure?
Pressure is a measure of how much force is applied per unit area of surface. It is a scalar quantity and has units of force per unit area. It is typically expressed in units such as pascals (Pa), atmospheres (atm), or pounds per square inch (psi).
We can use the formula:
pressure = force / area
where pressure is given as 200 kPa and area is given as 20 cm^2. Converting cm^2 to m^2:
20 cm^2 = 20 x 10^-4 m^2 = 0.002 m^2
Substituting the values in the formula and solving for force:
200 kPa = force / 0.002 m^2
force = 200 kPa x 0.002 m^2
force = 0.4 kN (kilonewtons)
The weight of the box is the force acting on it due to gravity, which is given by:
weight = mass x gravitational acceleration
Assuming the box is on the Earth's surface, we can use a value of 9.81 m/s^2 for gravitational acceleration. Solving for mass:
mass = weight / gravitational acceleration
mass = 0.4 kN / 9.81 m/s^2
mass = 0.0408 kg (kilograms)
Therefore, the weight of the box is approximately 0.0408 kg.
Learn more about Pressure from given link
https://brainly.com/question/28012687
#SPJ1
Please help 50 points and Brainly
Answer: 1st one: chemical to mechanical to electrical to thermal
2nd: hydroelectric, 3rd: gravity
1.- What is net net charge on the sweater? Why?
2.- What is the net charge on the balloon? Why?
ASAP pls and thank you!!
When students brush balloons against their wool sweaters or hair, electrons are moved from the wool or hair to the balloon. As a result, the balloon has a net negative charge, whereas the garment or hair, having shed negative charges, has a net positive charge.
What is net charge?The term "net" refers to the sum after both positive and negative costs have been deducted. So, if something has 321 positive charges and 319 negative charges, the overall charge is 321 - 319 = +2. The overall charge is 37 - 42 = -5 if it includes 37 positive charges and 42 negative charges.
Electrons are negatively charged, whereas protons are favourably charged. Atoms have an identical amount of electrons and protons and have a net charge of zero. This makes atoms always neutral.
Learn more about net charge
https://brainly.com/question/30196320
#SPJ1
In the two-fragment explosion that results when a gun is fired, the bullet acquires a significantly higher speed compaired to the recoil speed of the gun. Use a physics formula or a physics principle (directly related to the observation) to justify the observation.
The bullet has a much smallar Mass, and in an explosion, the object with less mass will always achive the higher velocity due to conservation of momentum.
This can be proven simply by this equation.
[tex]M_1V_1i +M_2 V_2i = M_1V_1 + M_2 V_2.[/tex]
The only way for Momentum to be Conserved in this situation is for the lighter object to achive a higher velocity to overcome the farge mass of the other object which will unvariably have a Small Velocity.
Conservation of momentum is a fundamental principle in physics that states that the total momentum of a closed system remains constant if no external forces act upon it. In a closed system, any change in momentum of one object must be balanced by an equal and opposite change in momentum of another object within the system. This principle applies to both the linear and angular momentum of a system.
The conservation of momentum has broad implications in physics, ranging from the behavior of subatomic particles to the motion of planets in our solar system. It is particularly important in understanding collisions and explosions, where the total momentum of a system is conserved even if individual objects experience significant changes in momentum.
To learn more about Conservation of momentum visit here:
brainly.com/question/25028535
#SPJ4
Complete Question:-
In the two-fragment explosion that results when a gun is fired, the bullet acquires a significantly higher speed compaired to the recoil speed of the gun. Use a physics formula or a physics principle (directly related to the observation) to justify the observation.
Please help 50 points and Brainly
Mechanical energy → Electrical energy → Thermal energy
What is mechanical energy?
Mechanical energy is the energy possessed by an object due to its motion or position. It is the sum of kinetic energy and potential energy of an object, which can be converted to other forms of energy, such as electrical energy or thermal energy.
What is electrical energy?
Electrical energy is the energy associated with the movement of electrons through a conductor or an electrical circuit. It is the result of the movement of charged particles, such as electrons, and is commonly generated by the conversion of other forms of energy, such as mechanical, chemical, or solar energy.
What is thermal energy?
Thermal energy is the energy associated with the temperature of an object or a system. It is the result of the movement of atoms and molecules in matter, which leads to the transfer of heat from hotter to cooler objects. Thermal energy is commonly measured in units of joules or calories and is proportional to the mass and temperature of an object or a system.
To know more about thermal energy, visit:
https://brainly.com/question/18989562
#SPJ1
A 120-kN truck has an engine that transmits a power of 380 kW to all the wheels. If the wheels do not slip on the ground, determine the angle of the largest incline the truck can climb at a constant speed of 72 km/h.
To determine the angle of the largest incline the truck can climb at a constant speed of 72 km/h, we need to use the formula for power, which is P = Fv, where P is the power, F is the force, and v is the velocity.
What is the equation for the maximum incline angle as ?Since the velocity is constant, the force required to maintain this speed up an incline is equal to the force of gravity acting on the truck, which is given by Fg = mg, where m is the mass of the truck and g is the acceleration due to gravity.
Thus, we can write the equation for the maximum incline angle as:
sinθ = Fg/F
where θ is the angle of the incline. Substituting the given values, we get:
sinθ = (mg)/Pv
sinθ = (120000 kg)(9.81 m/s²)
sinθ =( 0.157)/(380000 W)(20 m/s)
θ = 9.04 degrees
Therefore, the angle of the largest incline the truck can climb at a constant speed of 72 km/h is approximately 9.04 degrees.
To know more about constant speed , visit :
https://brainly.com/question/24909693
#SPJ1
The maximum angle of incline the truck can climb at a constant speed of 72 km/h without slipping is approximately 18.3 degrees.
calculation of the question :-
First, we need to calculate the force required to maintain a constant speed of 72 km/h on an incline. We can use the following formula:
Force = weight * sin(theta) + rolling resistance + air resistance
where weight is the weight of the truck, theta is the angle of the incline, rolling resistance is the force required to overcome the friction between the wheels and the ground, and air resistance is the force required to overcome air resistance.
Since the wheels do not slip on the ground, the rolling resistance is equal to the weight of the truck multiplied by the coefficient of rolling resistance, which is typically around 0.01. Air resistance is typically negligible at lower speeds, so we can ignore it in this case.
Let's assume the weight of the truck is 120 kN and the coefficient of rolling resistance is 0.01. We can now calculate the force required to maintain a constant speed of 72 km/h on an incline:
Force = 120 kN * sin(theta) + 0.01 * 120 kN
Next, we need to determine the power required to produce this force. We can use the following formula:
Power = force * speed
where speed is the speed of the truck in meters per second. Since the speed of the truck is 72 km/h, or 20 m/s, we can calculate the power required:
Power = (120 kN * sin(theta) + 0.01 * 120 kN) * 20 m/s
Now we can use the given engine power of 380 kW to determine the maximum angle of incline:
380 kW = (120 kN * sin(theta) + 0.01 * 120 kN) * 20 m/s
Simplifying this equation, we get:
sin(theta) = (380 kW / (120 kN * 20 m/s)) - 0.01
sin(theta) = 0.3167
Taking the inverse sine of both sides, we get:
theta = sin^-1(0.3167) = 18.3 degrees
Therefore, the maximum angle of incline the truck can climb at a constant speed of 72 km/h without slipping is approximately 18.3 degrees.
To know more about Speed visit :-
https://brainly.com/question/13943409
#SPJ1
which of the following would have the strongest magnetic field. assume the current in each is the same
Answer: Neodymium
Explanation: Neodymium is the strongest magnet. It is an alloy made from iron and boron. is the strongest magnet.
The strength of the magnetic field around the coil can be increased by increasing the current flowing through the coil (this will increase the flux) or by increasing the number of coil turns. which will also increase the flux Φ.
at the poles
The magnetic field around a magnet is the strongest at the poles. The maximum number of magnetic field lines pass through the poles.