An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble

A molecule with a tetrahedral shape has an approximate bond angle of 109.5 degrees.  The correct option is 3.

This is due to the arrangement of the four electron pairs around the central atom, which maximizes the distance between them to minimize repulsion and achieve a stable configuration. In a tetrahedral molecule, the central atom is located at the center of a tetrahedron, with four surrounding atoms or lone pairs located at each of the tetrahedron's vertices. The four bonds or lone pairs form a tetrahedral arrangement around the central atom, with bond angles of 109.5 degrees between them. Examples of tetrahedral molecules include methane (CH4) and carbon tetrafluoride (CF4). Option 3 is correct.

To know more about tetrahedral molecule, here

brainly.com/question/13849344

#SPJ4

--The complete question is, Give the approximate bond angle for a molecule with a tetrahedral shape.

1. 90o

2. 105o

3. 109.5o

4. 120o

5. 180o ---

A calorie is the commonly used unit of chemical energy. it is also the unit of energy used to measure the energy content of food.

Calorie (or kilocalorie) is a unit of measurement used to measure the energy content of food. It is the amount of energy required to raise the temperature of one kilogram of water by one degree Celsius.

One calorie is equal to the amount of energy required to raise the temperature of one gram of water by one degree Celsius.

Energy is a fundamental property of matter that can take many forms, such as electrical, thermal, chemical, nuclear, and mechanical energy.

Learn more about Calorie here:

https://brainly.com/question/1178789

#SPJ1

b. The number of valence electrons in an atom is the same for any element in the same group. Furthermore, that number is related to the group number for the main 8 families of the periodic table.

The type of mixture whose components are evenly distributed throughout is a homogeneous mixture.

A homogeneous mixture is a mixture in which the components are uniformly distributed throughout. The mixture appears to be the same throughout, and it has the same physical and chemical properties throughout. The composition of the components of a homogeneous mixture is uniform. An example of a homogeneous mixture is a solution of sugar and water. Sugar dissolves in water to form a homogeneous mixture. Another example is salt and water. Salt dissolves in water to form a homogeneous mixture.

However, These are the kinds of combinations where the ingredients are evenly dispersed throughout. In other words, "they are consistent throughout. In a homogenous mixture, we can only see one phase of the substance and components are evenly distributed throughout .

To know more about Homogenous mixture please visit:

https://brainly.com/question/20956879

#SPJ11

The difference in electrochemical potential between two electrodes of an electrochemical cell is called as the cell potential.

The potential difference or voltage that exists between two electrodes in an electrochemical cell when no current is flowing through the cell is called the cell potential. Cell potential, also known as electromotive force (emf), is a measure of the driving force that drives a chemical reaction in an electrochemical cell forward.

The potential difference between the anode and cathode of an electrochemical cell is a quantitative measurement of the cell's capacity to generate electrical energy. The cell potential is usually measured in volts (V), and its sign is determined by the direction in which the electrons flow through the cell. When electrons flow spontaneously from the anode to the cathode, the cell potential is positive, whereas if electrons are forced to flow from the cathode to the anode, the cell potential is negative.

Learn more about Cell potential here:

https://brainly.com/question/1313684

#SPJ11

Strong acid: H₂SO₄

Weak acid: H₂SO₃, HCN

Strong base: Sr(OH)₂, LiOH

Weak base: NH₃, H₂S

Acids are chemical compounds that, when dissolved in water, release hydrogen ions (H+). Their sour taste, capacity to make litmus paper red, and propensity to combine with bases to produce salts and water are what distinguish them. Depending on how much an acid dissociates in water, it can be characterised as either a strong or weak acid.

In water, strong acids like sulfuric and hydrochloric acid totally dissociate to create H+ ions and anions. In water, weak acids like acetic acid and carbonic acid only partially dissociate.

Acids play an important role in many chemical reactions and are used in various applications such as food and beverage processing, pharmaceuticals, and cleaning agents.

Learn more about acid here:

https://brainly.com/question/14072179

#SPJ4

Cobalt has an atomic number of 27. An atomic number is equal to the number of protons in an atom's nucleus. Electrons are the particles that orbit an atom's nucleus in energy levels, and each atom has an equal number of electrons and protons. Therefore, the correct option is b. 27.

The charge number of an atomic nucleus is the chemical element's atomic number, also known as nuclear charge number. For ordinary nuclei, this is equivalent to the proton number or the number of protons found in the nucleus of every atom of that element. Ordinary chemical elements can be uniquely identified by their atomic number. The symbol Z refers to the atomic number. For instance, the atomic number of helium is 2 since it has two protons in the nucleus. Each element's atomic number is unique. The periodic table's components are arranged in order of increasing atomic number from left to right and top to bottom. Cobalt is a chemical element that is represented by the symbol Co and has an atomic number of 27. Cobalt is a hard, grey metal that is commonly used in the manufacture of rechargeable batteries and high-strength alloys. Cobalt has a number of distinct oxidation states, including +2, +3, and +4.

The atomic number of cobalt is 27. An atomic number is equal to the number of protons in an atom's nucleus. Each atom has an equal number of electrons and protons, and electrons are the particles that orbit the nucleus of an atom at different energy levels. Therefore, choice b. 27 is the appropriate one.

Learn more about atomic number on:

https://brainly.com/question/11353462

#SPJ11

A chemical alteration has occurred. A new material, cottage cheese, with distinct qualities from the original milk and vinegar is produced when the acid in the vinegar and the proteins in the milk react.

The change described is a chemical change. When vinegar, which is an acid, is combined with milk, a reaction occurs between the acid and the proteins in the milk. This reaction causes the milk to sour and thickens, resulting in the formation of cottage cheese. This change cannot be easily reversed, and the resulting cottage cheese is a new substance with different properties than the original milk and vinegar. This is a chemical change because the molecules in the milk and vinegar are rearranged to form a new substance, which has different chemical and physical properties than the original substances. This process is different from a physical change, such as melting ice, which does not result in the formation of a new substance.

learn more about chemical alteration here:

https://brainly.com/question/29037431

#SPJ4

The statement that describes one of the three main categories of elements is: b. Nonmetals are mostly gas at room temperature.

Nonmetals are a group of elements that generally lack metallic properties. They are located on the right-hand side of the periodic table and include elements such as hydrogen, carbon, nitrogen, oxygen, fluorine, and neon, among others.

Nonmetals are typically poor conductors of heat and electricity and tend to have low melting and boiling points. They also tend to be brittle and lack luster, and some are gases at room temperature, while others are solids or liquids.

Nonmetals play important roles in various fields, such as chemistry, biology, and electronics. For example, nonmetals like oxygen, carbon, and nitrogen are essential components of many organic molecules and play critical roles in biological processes. In electronics, nonmetals like silicon and germanium are used to make semiconductors, which are essential components in electronic devices such as computers.

To know more about conductors, visit:

https://brainly.com/question/18084972

#SPJ1

Carbonate (CO₃²⁻) is an example of a polyatomic ion.

What is polyatomic ion?

Polyatomic ions are tightly associated groups of atoms that carry an overall charge, resulting in the formation of ionic bonds with other atoms or polyatomic ions.

For instance, the polyatomic ion carbonate is CO₃²⁻. In order to write the formula of a compound that contains this polyatomic ion, one must first enclose the CO₃²⁻ in brackets to show that it's one unit or ion.

The negative sign indicates that the ion has two more electrons than protons. The chemical formula of carbonate is CO₃²−. The part of the formula that should show up is the polyatomic ion, which, in this case, is CO₃²−. CO₃²− is called the carbonate ion, and it has two different elements: one carbon atom and three oxygen atoms.

Example: Barium carbonate formula BaCO₃.

To know more about polyatomic ion:

brainly.com/question/12852496

#SPJ11

Bond orders are calculated by dividing the total number of electrons in bonding orbitals by the total number of bonds.

The Lewis structures of ethane and ethene can be used to predict the bond orders in these molecules. Ethane has a single bond between the carbon atoms, which indicates a bond order of one.

Ethene has a double bond between the carbon atoms, which indicates a bond order of two. The calculated bond orders for ethane and ethene are the same as those predicted by their Lewis structures.

The Lewis structure of ethyne can also be used to predict the bond order. It has a triple bond between the carbon atoms, which indicates a bond order of three. However, the calculated bond order for ethyne is less than three. This is because the electrons in the triple bond are spread out over a larger region, making the bond weaker than expected based on the Lewis structure.

The calculated bond order for ethyne is approximately 2.5, which is lower than the predicted bond order of three based on the Lewis structure.

In summary, the calculated bond orders for ethane and ethene are the same as those predicted by their Lewis structures. The calculated bond order for ethyne is lower than the predicted bond order of three based on the Lewis structure.

Read more about the topic of lewis structures:

https://brainly.com/question/20300458

#SPJ11

The expression and control of genes can be impacted by mutations in non-coding sequences, such as promoter regions, splicing sites, or enhancer sequences, which eventually alter protein production and function.

Although making up the majority of the genome, non-coding sequence mutations can nevertheless have a large impact on how genes operate. These mutations can appear in areas that control the production and activity of genes, such as promoter regions, splicing sites, or enhancer sequences. The binding of transcription factors, which are proteins that start the transcription of the gene into RNA, can be affected by mutations in the promoter regions, which will eventually influence the amount of mRNA generated. Splicing site mutations can result in processing mistakes that result in shortened or malformed proteins. Enhancer sequence mutations can change how well regulatory proteins bind to DNA and either stimulate or suppress gene expression. These kinds of non-coding alterations may eventually affect the production and operation of proteins.

learn more about mutations here:

https://brainly.com/question/30696458

#SPJ4

According to the question the reaction A+B→C+D is exothermic.

Reaction in chemistry is a process in which two or more substances interact to form a new substance. Chemical reactions involve the breaking of chemical bonds and the formation of new bonds. Chemical reactions are essential for the formation and breaking of molecules, and are responsible for the production of energy.

a) The reaction A+B→C+D is exothermic.

b) The AH for the forward reaction is the difference between the enthalpies of the products and the reactants. The AH for the backward reaction is the difference between the enthalpies of the reactants and the products.

c) X would represent the position of the activated complex on the graph.

d) The activation energy for the forward reaction is the difference between the enthalpies of the reactants and the activated complex. The activation energy for the backward reaction is the difference between the enthalpies of the products and the activated complex. The forward reaction is expected to be faster because it has a lower activation energy.

e) On the same set of axes, the graph would show a decrease in the activation energy with the use of a catalyst, resulting in a lower energy barrier and faster reaction rates.

To learn more about reaction

https://brainly.com/question/25769000

#SPJ1

At -40°C temperature the Fahrenheit equal to centigrade. They are equal at  the temperature of -40 °C and -40 °F.

Temperature is defined as the degree of hotness or coldness measured by a thermometer with a numerical scale. There are three types of temperature scale  those are Celsius, Fahrenheit and Kelvin. The Fahrenheit scale is known as a temperature scale based on one proposed in 1724 by the physicist Daniel Gabriel Fahrenheit. This scale uses the degree Fahrenheit as the unit. The degree Celsius is defined as  the unit of temperature on the Celsius scale that one of two temperature scales used in the International System of Units and the other being the Kelvin scale. Temperature is defined as a physical quantity that expresses quantitatively the perceptions of hotness and coldness. It is measured with a thermometer.

To learn more about Temperature

https://brainly.com/question/24746268

#SPJ4

The correct option is 3. Aluminum typically has a charge of +3 in ionic compounds, and the reason behind this is the number of valence electrons in the outermost shell of the aluminum atom.

In ionic compounds, the charge of an element is determined by the number of valence electrons present in its outermost shell. The valence electrons are those that are involved in chemical bonding and they determine the reactivity of an atom. This gives aluminum an atomic number of 13 and an electron configuration of 1s²2s²2p⁶3s²3p¹.

In the case of aluminum, it has three valence electrons in its outermost shell, which means it can lose these three electrons to form a positively charged ion with a charge of +3. So, in ionic compounds, aluminum typically has a charge of +3.

Moreover, when aluminum loses these three valence electrons, it attains a noble gas configuration, which is a stable configuration that many elements strive to achieve.

Aluminum is a chemical element with the symbol Al and atomic number 13. It is a silvery-white, soft, non-magnetic, and ductile metal in the boron group. It is the third most abundant element after oxygen and silicon and the most abundant metal in the Earth's crust. It is commonly used in various applications due to its low density, high strength-to-weight ratio, and good corrosion resistance.

Therefore, option 3 is the correct reason for Al having +3 charge.

To know more about Aluminum, refer here:

https://brainly.com/question/9496279#

#SPJ11

The positively charged particles found in nucleus of an atom and those are called protons.

Protons are found in the nucleus of the atom. This is a tiny, dense region at the center of the atom. Protons have a positive electrical charge of one (+1) and a mass of 1 atomic mass unit which is about 1.67×10−27 kilograms. There are 2 types of particles in the nucleus. Those particles are neutrons and protons. The positively particle called as protons have unit positive charge and neutrons are neutral in charge.

An atom is defined as a particle of matter that uniquely defines a chemical element. This consists of a central nucleus that is surrounded by one or more negatively charged electrons. It is evident that the nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.

To learn more about Protons

https://brainly.com/question/1481324

#SPJ4

Inhibitory post-synaptic potentials (IPSPs) are a group of answer choices that result in local hyperpolarization. The IPSPs help prevent the efflux of potassium ions and increase the membrane permeability to chloride ions.

When a neurotransmitter binds to a receptor on the post-synaptic neuron, the ion channels open to allow ions to pass into or out of the neuron.

The IPSPs are caused by the opening of chloride ion channels or potassium ion channels. This hyperpolarizes the neuron and makes it less likely to fire an action potential.

Potassium ions have a crucial role in the generation of IPSPs. They are responsible for maintaining the resting potential of the neuron.

When the ion channels open, potassium ions leave the cell, making the interior more negative, resulting in hyperpolarization. This makes it harder for the neuron to fire an action potential.

IPSPs are essential in controlling the firing rate of neurons in the central nervous system. They can also help prevent seizures and other unwanted excitatory activity.

IPSPs are often used in combination with other synaptic potentials, such as excitatory post-synaptic potentials (EPSPs), to fine-tune the activity of the neuron.

to know more about hyperpolarization refer here:

https://brainly.com/question/12982897#

#SPJ11

The molarity will determine the concentration of the acid in the solution, thus increasing the rate of the reaction. The temperature will increase the kinetic energy of the particles. The size of the pieces of magnesium: a larger surface area of magnesium will increase the rate of reaction.

The molarity of the hydrochloric acid:The rate of reaction of magnesium metal with a solution of hydrochloric acid is increased when the molarity of the hydrochloric acid increases. This is because an increase in the molarity of the hydrochloric acid increases the concentration of hydrogen ions in the solution, which increases the frequency of successful collisions between magnesium atoms and hydrogen ions, hence increasing the rate of reaction.

The temperature of the solution:The rate of reaction of magnesium metal with a solution of hydrochloric acid is increased when the temperature of the solution increases. This is because an increase in temperature increases the kinetic energy of magnesium atoms and hydrogen ions, increasing the frequency of successful collisions between them, hence increasing the rate of reaction.

The size of the pieces of magnesium:The rate of reaction of magnesium metal with a solution of hydrochloric acid is increased when the size of the pieces of magnesium decreases. This is because a smaller size of magnesium increases the surface area of magnesium in contact with the solution, increasing the frequency of successful collisions between magnesium atoms and hydrogen ions, hence increasing the rate of reaction.

More on reaction rates: https://brainly.com/question/29767006

#SPJ11

None of the available choices have as many molecules as 1 L of STP-produced C2H4 gas.

At STP (Standard Temperature and Pressure), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere, the volume of a gas is directly proportional to the number of molecules present. This means that if we have two gases at STP with the same volume, they must contain the same number of molecules.

For a gas with a given volume, the number of molecules present can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

To determine which gas has the same number of molecules as 1 L of C2H4 gas, we need to calculate the number of moles of C2H4 present in 1 L of C2H4 gas. The molar volume of any gas at STP is 22.4 L/mol.

The molar mass of C2H4 is 28.05 g/mol, so 1 L of C2H4 gas at STP contains:

n = m/M = 1000 g / 28.05 g/mol = 35.6 mol

Therefore, 1 L of C2H4 gas contains 35.6 moles of C2H4.

(a) For 0.5 L of H2 gas, the number of moles present is:

n = PV/RT = (1 atm x 0.5 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0207 mol

Since 0.0207 mol is less than 35.6 mol, 0.5 L of H2 gas has fewer molecules than 1 L of C2H4 gas.

(b) For 1 L of Ne gas, the number of moles present is:

n = PV/RT = (1 atm x 1 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0409 mol

Since 0.0409 mol is less than 35.6 mol, 1 L of Ne gas has fewer molecules than 1 L of C2H4 gas.

(c) For 2 L of H2O gas, the number of moles present is:

n = PV/RT = (1 atm x 2 L) / (0.0821 L atm/mol K x 273.15 K) = 0.082 mol

Since 0.082 mol is less than 35.6 mol, 2 L of H2O gas has fewer molecules than 1 L of C2H4 gas.

(d) For 3 L of Cl2 gas, the number of moles present is:

n = PV/RT = (1 atm x 3 L) / (0.0821 L atm/mol K x 273.15 K) = 0.123 mol

Since 0.123 mol is less than 35.6 mol, 3 L of Cl2 gas has fewer molecules than 1 L of C2H4 gas.

Therefore, none of the given options have the same number of molecules as 1 L of C2H4 gas at STP.

To learn more about  molecules refer to:

brainly.com/question/14646440

#SPJ4

The final pressure of the car tire after heating from 38°C to 123°C is approximately 2.29 atm.

To calculate the final pressure of the car tire, we can use the ideal gas law, which states that:

PV = nRT

where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas in Kelvin.

We can assume that the volume of the car tire remains constant, so we can simplify the ideal gas law to:

P1/T1 = P2/T2

where P1 is the initial pressure, T1 is the initial temperature in Kelvin, P2 is the final pressure, and T2 is the final temperature in Kelvin.

To solve for P2, we need to convert the temperatures from Celsius to Kelvin:

T1 = 38°C + 273.15 = 311.15 K

T2 = 123°C + 273.15 = 396.15 K

Now we can substitute the values we have:

P1/T1 = P2/T2

1.8 atm / 311.15 K = P2 / 396.15 K

To solve for P2, we can cross-multiply and simplify:

P2 = (1.8 atm) x (396.15 K) / (311.15 K)

P2 = 2.29 atm

Therefore, the final pressure of the car tire after heating from 38°C to 123°C is approximately 2.29 atm.

To learn more about ideal gas law:

https://brainly.com/question/27870704

#SPJ4

When two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting, then their kinetic energy keeps increasing, acceleration keeps decreasing, kinetic energy keeps decreasing, electric potential energy keeps decreasing.

The electrostatic force is a force that arises between electrically charged objects. It is the force exerted on a charged particle by other charged particles or electromagnetic fields. It is a fundamental force in nature that has an infinite range and can be either attractive or repulsive. The strength of the electrostatic force is proportional to the inverse square of the distance between the charged particles. As two charged particles move closer together, the force between them increases. Therefore, as the two protons move closer together, their kinetic energy and electric potential energy will increase.

According to Coulomb's law, the electrostatic force is inversely proportional to the square of the distance between the two charges. Therefore, as the distance between the two protons decreases, the electrostatic force acting between them will increase. As a result, their acceleration will keep decreasing. At the same time, as the protons move closer together, their kinetic energy will keep increasing while their electric potential energy will keep decreasing.

Learn more about Electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

The balanced equation of the given reaction is: e₃bc₄ + d(ca)₂ --> d₃(bc₄)₂ + 3eca.

Hence, the coefficient that goes in front of the eca in the reaction is 3.

A balanced equation is a chemical equation in which the number of atoms of each element is equal on both the reactant and product sides. In other words, the total mass and charge are conserved in a chemical reaction.

For example, consider the following unbalanced equation for the reaction between hydrogen gas and oxygen gas to form water:

H2 + O2 → H2O

This equation is unbalanced because the number of hydrogen and oxygen atoms is not the same on both sides of the equation.

To balance the equation, we need to adjust the coefficients in front of the reactants and products to make the number of atoms of each element equal on both sides:

2H2 + O2 → 2H2O

Now the equation is balanced because there are two hydrogen atoms and two oxygen atoms on both the reactant and product sides.

Learn more about balanced equations of reactions at: https://brainly.com/question/26694427

#SPJ1

Benzoic acid undergoes electrophilic substitution, and the substituent is usually added to the meta position.

Nitrobenzene undergoes electrophilic substitution, and the nitro group is usually added to the ortho or para position.

Electrophilic aromatic substitution reactions Aromatic compounds are rich in electrons and are therefore prone to undergoing electrophilic substitution reactions.

Electrophiles are electron-poor molecules that act as reagents in substitution reactions of aromatic compounds.

Electrophilic substitution reactions are a type of organic reaction in which an electrophile displaces a functional group or a portion of a molecule from an aromatic molecule.

The displacement of a proton from the aromatic ring results in the creation of a carbocation intermediate that rapidly rearranges to the more stable carbocation form.

The following are examples of aromatic compounds that undergo electrophilic substitution: Benzene, benzoic acid, nitrobenzene, toluene, phenol, and aniline are examples of aromatic compounds that undergo electrophilic substitution.

The substituent is usually added to the benzene ring's ortho or para position.

The following are the positions at which substituents can be added to an aromatic ring: Ortho position is the position adjacent to the substituent's point of attachment.

Para position is the position opposite to the substituent's point of attachment.

Meta position is the position separated from the substituent's point of attachment by two carbons.

For example, the electrophilic substitution of a methyl group on a benzene ring results in the formation of a product with two isomers: ortho-methylbenzene and para-methylbenzene.

Benzene undergoes electrophilic aromatic substitution reactions, and the substituent is added to the ortho or para position.

Toluene undergoes electrophilic substitution, and the substituent is usually added to the ortho or para position.

For similar question on substituent.

https://brainly.com/question/27310789

#SPJ11

NaOH and CH₃COOH produce CH₃COONa and H₂O. Whereas sodium hydroxide is a powerful base, acetic acid is a weak acid. As a result, the solution's pH will be alkaline or basic.

NaOH + CH₃COOH = CH₃COONa + H₂O.

This reaction, which involves an acid and a base and results in the formation of a salt and a water molecule, is an illustration of a neutralisation reaction.

By counting the number of atoms of each element present on both sides of the equation, or by using the knowledge that sodium hydroxide is a strong base, you can determine whether this chemical equation is balanced.

Again, nothing needs to be balanced out because both sides of the reaction include a water molecule, an undissociated proton, and a dissociated hydroxide anion.

Learn more about Sodium hydroxide here:

https://brainly.com/question/29327783

#SPJ1

No, a strong acid cannot have a pH that is greater than that of a weak acid with the same concentration. A solution's acidity is determined by its pH, with lower pH values suggesting higher acidity.

When an acid is dissolved in water, strong acids totally dissociate into ions, whereas weak acids only partially do so. The concentration of hydrogen ions (H+) in the solution will still be higher than that of a strong acid of the same concentration, even if a weak acid has only partially dissociated. Because an acid's propensity to give protons determines how strong it is, an acid with a larger concentration of H+ ions in solution will have a lower pH value.A weak acid with the same concentration cannot have a pH that is higher than a strong acid. When a weak acid partially dissociates into ions, it will have a lower concentration of H+ ions and a higher pH than a strong acid of the same concentration. The concentration of hydrogen ions in a solution affects its pH.

learn more about strong acid  here:

https://brainly.com/question/31143763

#SPJ4

Sunita should ensure that her results are reliable by repeating her experiment several times, using the same amounts of water and dye, and recording the results each time.

Diffusion is the process by which molecules or particles spread from an area of higher concentration to an area of lower concentration. This process occurs naturally and is driven by the random motion of molecules. Diffusion is the main mechanism by which substances move in and out of cells, and it is a key process in the transport of nutrients and waste products within an organism.

Furthermore,  Sunita should also use a timer or stopwatch to record the exact time it takes for the dye to spread evenly. Additionally, she should use the same container to hold the water each time, and she should make sure the water is at the same temperature before adding the dye.

Learn more about diffusion here:

https://brainly.com/question/94094

#SPJ1

The scenes that best represent how ions occur in aqueous solutions of Li2SO4, CaCl2, and NHBr are as follows:

a. For Li2SO4, the scene that best represents how ions occur in an aqueous solution is scene A. When Li2SO4 dissolves in water, the ionic compound dissociates into Li+ and SO42-. The Li+ ion has a charge of +1, while the SO42- ion has a charge of -2.

Therefore, there are two Li+ ions for every SO42- ion in solution. (b) For CaCl2, the scene that best represents how ions occur in an aqueous solution is scene C. When CaCl2 dissolves in water, it dissociates into Ca2+ and 2Cl- ions.The Ca2+ ion has a charge of +2, while the Cl- ion has a charge of -1. Therefore, there is one Ca2+ ion for every two Cl- ions in solution. (c) For NH4Br, the scene that best represents how ions occur in an aqueous solution is scene B.

When NH4Br dissolves in water, it dissociates into NH4+ and Br- ions. The NH4+ ion has a charge of +1, while the Br- ion has a charge of -1. Therefore, there is one NH4+ ion for every one Br- ion in solution.

Know more about ionic compound here:

https://brainly.com/question/3222171

#SPJ11

The Correct option is A, The IUPAC name of the compound CH3–CHCH3–CO–CH3 is 3-methyl-2-butanone.

In chemistry, a compound is a substance formed by the chemical combination of two or more different elements in fixed proportions. The atoms in a compound are held together by chemical bonds, which can be covalent, ionic, or metallic depending on the nature of the elements involved.

Compounds have unique physical and chemical properties that are different from their constituent elements. For example, water is a compound formed by the chemical combination of hydrogen and oxygen in a fixed ratio of 2:1 by mass. While hydrogen is a highly flammable gas and oxygen is necessary for combustion, water is a non-flammable liquid that is essential for life.

There are many different types of compounds, including organic and inorganic compounds. Organic compounds are those that contain carbon atoms, while inorganic compounds do not. Examples of organic compounds include sugars, proteins, and fats, while examples of inorganic compounds include salt, water, and carbon dioxide.

To learn more about Compound visit here:

brainly.com/question/19458442

#SPJ4

Complete Question:

The IUPAC name of the compound CH3–CHCH3–CO–CH3 is

A 3-methyl-2-butanone

B 2-methyl-3-butanone

C Isopropyl methyl ketone

D 2ethyl-2methyl pentane

Answer:

I think physical because it changes the actual tooth.

You got a cavity in a tooth: Physical

This process is a physical change because the chemical composition of the tooth structure remains the same, but its physical shape or structure is altered.

The gravy in the refrigerator turned jelly-like as it cooled: Physical

This is because the change in state of the gravy, from liquid to solid, is a physical change that does not alter the chemical composition of the gravy.

The sugar in the coffee dissolved: Physical

This is because the sugar molecules are not chemically altered during the process of dissolving in the coffee.

The red meat turned brown as it cooked: Chemical

This is because the heat from cooking causes a chemical reaction between the proteins and the oxygen in the air, resulting in a change in the chemical composition of the meat.

My room was white and I painted it a bright red color: Physical

This is because the paint and the wall remain chemically the same after painting, but only the physical appearance of the wall changes.

I sharpened my pencil before I started taking my test: Physical

This is because the process of sharpening only alters the physical shape of the pencil tip, but does not change the chemical composition of the pencil.

We made popsicles to bring to the picnic: Physical

The process of mixing the ingredients such as juice or fruit with sugar and water, and then pouring the mixture into popsicle molds, is a physical change because the chemical composition of the individual ingredients does not change.

The symbol for the ion electronic structure 1s^2 2s^2 2p^6 3s^2 3p^6 3d^10 4s^2 4p^6 4d^10 5s^2 with an atomic number of 50 is Sn (Tin).

EXPLANATION: The symbol for the ion electronic structure with an atomic number of 50 and the following configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s² is Sn. Therefore, the symbol for the ion electronic structure with an atomic number of 50 and the following configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s² is Sn.What is electronic structure?An electronic structure describes how the electrons of an atom are distributed among the shells and sub-shells in the ground state. The electronic structure of atoms is divided into shells and sub-shells, where shells are the outermost part of an atom and sub-shells are the inner part of an atom.The electronic structure of atoms is vital in chemistry because it determines how atoms interact with each other, as well as how they form bonds to make molecules. Therefore, understanding electronic structures is essential in order to grasp and understand chemistry.

For more questions on atomic number

https://brainly.com/question/14719614

#SPJ11