A student sets up a titration with a * 1 point buret filled with 0.5 M NaOH. In the flask below they place the phenolphthalein indicator and 6.2 mL of the unknown acid. The solution in the beaker turns pink after exactly 24.8 mL of NaOH have been added. Find the exact concentration of the unknown acid.
Answers
Answer:
2.00 M
Explanation:
In a titration, we can determine the concentration of an unknown acid by adding a known concentration of a base, such as NaOH, until the reaction is complete. At the endpoint of the reaction, the amount of base added is equal to the amount of acid present in the sample.
From the problem, we know that the NaOH solution has a concentration of 0.5 M, and that 24.8 mL of NaOH is required to completely react with the unknown acid in the flask. We can use this information to calculate the number of moles of NaOH that were added:
moles of NaOH = concentration x volume
moles of NaOH = 0.5 mol/L x 0.0248 L
moles of NaOH = 0.0124 moles
Since the reaction is a neutralization reaction between an acid and a base, the number of moles of NaOH added is equal to the number of moles of acid in the flask. Therefore, we can calculate the concentration of the acid using the volume of acid added:
moles of acid = moles of NaOH
moles of acid = 0.0124 moles
volume of acid = 6.2 mL = 0.0062 L
concentration of acid = moles of acid / volume of acid
concentration of acid = 0.0124 moles / 0.0062 L
concentration of acid = 2.00 M
Therefore, the exact concentration of the unknown acid is 2.00 M.
Related Questions
Dissolving 7.51 g of CaCl2 in enough water to make 332 mL of solution causes the temperature of the solution to increase by 3.25 oC. Assume the specific heat of the solution and density of the solution are the same as water′s (about 4.18 J/goC and 1.00 g/cm3, respectively) Calculate ΔH per mole of CaCl2 (in kJ) for the reaction under the above conditions.
Answers
Answer:
65.72 kJ/mol
Explanation:
The temperature change, ΔT, can be used to calculate the amount of heat absorbed by the solution:
q = CmΔT
where q is the heat absorbed, C is the specific heat capacity of water (4.18 J/goC), m is the mass of the solution, and ΔT is the temperature change.
The mass of the solution can be calculated using its density:
m = Vd
where V is the volume of the solution (332 mL = 0.332 L), and d is the density of water (1.00 g/cm3).
m = 0.332 L x 1.00 g/cm3 = 332 g
The amount of heat absorbed, q, can now be calculated:
q = CmΔT = (4.18 J/goC) x (332 g) x (3.25 oC) = 4447 J
This amount of heat is absorbed by the dissolution of 7.51 g of CaCl2. To calculate the enthalpy change per mole of CaCl2, we need to convert grams to moles:
moles of CaCl2 = 7.51 g / 110.98 g/mol = 0.0676 mol
Therefore, the enthalpy change per mole of CaCl2 is:
ΔH/mol = q / moles of CaCl2 = 4447 J / 0.0676 mol = 65720 J/mol = 65.72 kJ/mol
So the enthalpy change per mole of CaCl2 is 65.72 kJ/mol.
4. What volume, in cm', of 0. 100 moldm³ H₂SO, will produce an acid salt using 50.00cm³ of 0.200 moldm³ KOH solution? -3 C 75.00 D. 100.00 A. 25.00 B. 50.00 C 75.00
Answers
Answer:
50.00 cm³
Explanation:
Relevant formula:
n = V × c
n = number of moles (mol)
V = volume (dm³)
c = concentration (mol/dm³)
1. Work out moles of KOH
V = 50cm³ = 0.05dm³
Note: remember to convert to the right units (1 dm³ = 1000cm³)
c = 0.2
n = 0.05 × 0.2
n = 0.01
2. Use balanced reaction equation to find the moles of H2SO4
c = 0.1
H2SO4 + 2KOH --> K2SO4 + 2H2O
Ratio of KOH to H2SO4:
2 : 1 (--> 1 is ½ of 2)
If we have 0.01 moles of KOH therefore:
0.01 : x
x = 0.005 (i.e. ½ of 0.01)
3. Calculate volume of H2SO4
n = V × c
0.005 = V × 0.1
V = 0.005 ÷ 0.1
V = 0.05
This reaction will take 0.05 dm³ of H2SO4, or 50 cm³
which of the following describes an experimental technology being used to reduce carbon dioxide emissions from coal?
Answers
Carbon capture and storage is one experimental method being utilised to lower carbon dioxide emissions from coal (CCS).
One experimental technique being used to reduce carbon dioxide emissions from coal is carbon capture and storage (CCS). With CCS, carbon dioxide emissions from factories or power plants are captured and either stored underground in geological formations or used to improve oil recovery.
Coal and other fossil fuels have the potential to drastically cut their carbon dioxide emissions, but CCS technology currently in the experimental stage. Unfortunately, because of its expensive cost and technical implementation difficulties, the technology is not yet extensively employed. In order to address the current climate problem, efforts to cut CO2 emissions are essential.
Learn more about carbon dioxide here:
https://brainly.com/question/9419166
#SPJ4
What experimental technology is being used to reduce carbon dioxide emissions from coal?
Each of the properties that follow is a characteristics of the carbon atom. in each case, indicate how the property contributes to the role of the carbon atom as the most important atom in biological molecules.
a. the carbon atom has a valence of four.
b. the carbon-carbon bond has a bond energy that is above the energy of photons of light in the visible range(400-700)
c. carbon is one of the lightest elements to form a covalent bond.
d. carbon can form single, double and triple bonds.
e. the carbon atom is a tetrahedral structure.
Answers
Carbon's unique properties such as having a valence of four, the ability to form various types of bonds including double and triple bonds, and its tetrahedral structure.
What are the properties of carbon bonds?
a. The carbon atom's valence of four enables it to form up to four covalent bonds with other atoms, allowing for the formation of diverse organic molecules. This property makes carbon the backbone of many biological molecules, including carbohydrates, lipids, proteins, and nucleic acids.
b. The high bond energy of carbon-carbon bonds makes them stable and resistant to breaking under normal physiological conditions, contributing to the stability of biological molecules. This property allows for the formation of complex macromolecules, such as enzymes and DNA, which are essential to life.
c. Carbon's relatively low atomic weight allows it to form strong covalent bonds without adding significant mass to the molecule. This property is essential for the formation of large and complex biological molecules, which require many carbon atoms to function properly.
d. The ability of carbon to form single, double, and triple bonds allows for the formation of diverse molecular structures, including cyclic structures and branching chains. This property contributes to the diversity of organic molecules found in living organisms, allowing for the creation of molecules with specific functions.
e. The tetrahedral structure of the carbon atom enables it to form strong and stable bonds with other atoms while maintaining a relatively stable geometry. This property is essential for the formation of complex three-dimensional structures in proteins and other biological molecules, allowing them to perform specific functions within cells.
Learn more about carbon bond here: https://brainly.com/question/12156863
#SPJ1
To a beaker weighing 263.2 g, you add 87.10 g of water and 0.549 g of sugar. Determine the combined
mass of the beaker, water and sugar (in grams).
Answers
Answer: 350.849 g
Explanation:
The question is asking the masses of water, sugar, and the beaker to be added together. So, it can be understood that we need to add all of the masses up as follows to get the combined mass:
263.2 g + 87.10 g + 0.549 g = 350.849 g
From this, we can determine that the combined mass of the beaker, water, and sugar (in grams) is 350.849 g.
Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?
Answers
Answer:
Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?
Explanation:
According to the balanced chemical equation:
1 mole of C2H4 reacts with 3 moles of O2
Therefore, for 20 moles of C2H4 combusted, we would need:
20 moles C2H4 × (3 moles O2 / 1 mole C2H4) = 60 moles O2
So, 60 moles of O2 are consumed in the combustion of 20 moles of C2H4.
Answer the following questions with a true or a false. PLease help me this is due in 5 more minutes
1.Natural hazards cause a range of negative impacts on people including disruptions to daily life, damage to property, economic loss, and injury to people.
2.Natural hazards vary in their severity (the degree to which they have impacts) because of the range of magnitudes that are possible for any natural hazard event.
3.Many natural hazards cause damage to property such as buildings, roads, vehicles, bridges. They cause these damages due to the unbalanced forces that shaking, moving water, and wind place on objects. These forces cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.
4. The most intense and impactful natural hazard events of the past can help predict the possible intensity and damages of future hazards.
5.It is possible to predict how likely it is that a natural hazard event will occur in the future by examining how often such events have occurred in the past.
6.Patterns in the locations of past events help us forecast future events.
7.In order to make forecasts based only on records of past events, scientists must assume that the conditions that created those hazards in the past will remain the same in the future.
Answers
The answer for all natural hazards statements are 1. True, 2. Ture, 3. True, 4. True, 5. True, 6. True, 7. False.
Describe Natural Hazards?Natural hazards are natural phenomena that can potentially cause harm or damage to humans, property, or the environment. These hazards are events that are caused by natural processes, such as geological, meteorological, hydrological, or biological processes. Natural hazards can range from relatively minor events, such as a small earthquake or a local flood, to catastrophic events, such as a volcanic eruption, a major earthquake, or a tsunami.
This statement is true. Natural hazards, such as earthquakes, hurricanes, floods, and wildfires, can cause a wide range of negative impacts on people and communities, including disruptions to daily life, damage to property, economic loss, and injury to people.
This statement is true. Natural hazards vary in their severity because they can occur in a range of magnitudes, from mild to extreme. The severity of a natural hazard event depends on various factors, such as the strength and duration of the event, the location and vulnerability of the affected population, and the preparedness and response capacity of the community.
This statement is true. Many natural hazards, such as earthquakes, hurricanes, and tornadoes, cause damage to property by exerting unbalanced forces on objects. These forces can cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.
This statement is true. Studying the most intense and impactful natural hazard events of the past can help scientists and communities better understand the possible intensity and damages of future hazards. This information can be used to improve preparedness, response, and recovery efforts.
This statement is true. Examining the historical record of natural hazard events can help scientists and communities predict how likely it is that a similar event will occur in the future. This information can be used to assess risk and inform decision-making.
This statement is true. Patterns in the locations, frequency, and intensity of past natural hazard events can help scientists and communities forecast future events. For example, if a certain area has experienced frequent earthquakes in the past, it is more likely to experience earthquakes in the future.
This statement is false. While records of past events can provide valuable information for predicting future hazards, scientists do not assume that the conditions that created those hazards in the past will remain the same in the future. They consider a wide range of factors, such as changes in climate, land use, and population density, that may affect the occurrence and impact of natural hazards.
To know more about hazard visit:
https://brainly.com/question/28269548
#SPJ1
select all ions that are produced when nh4cl is dissolved in water. group of answer choices hcl nh nh3 nh4 cl-
Answers
When NH4Cl is dissolved in water, the following ions are produced are H+, Cl-, NH3, and NH4+.
When NH4Cl is dissolved in water, the ions that are produced are H+, Cl-, NH3, and NH4+. An ion is an electrically charged atom or molecule. When a neutral atom or molecule gains or loses electrons, it acquires an electric charge and becomes an ion.
Conventionally, the charge of an electron is thought to be negative; this charge is equal to and opposite to the charge of a proton, which is thought to be positive. Because the total number of electrons in an ion is more than the total number of protons, the net charge of an ion is not zero.
A negatively charged ion called an anion has more electrons than protons compared to a positively charged ion called a cation. Electrostatic force causes opposite electric charges to be drawn towards one another, causing cations and anions to attract one another and easily form ionic compounds.
The ammonium ion, NH4+, is generated when ammonia (NH3) is combined with a hydrogen ion (H+), which results in the formation of NH4+ ions. When NH4Cl dissolves in water, the NH4Cl dissociates into its component ions, NH4+ and Cl-.
As a result, the answer is H+, Cl-, NH3, and NH4+.
For more such questions on NH4Cl , Visit:
https://brainly.com/question/30459946
#SPJ11
The following calculations must be handwritten in your notebook. –
ROOM TEMPERATURE; 71.8 F
1. The the steps you took to determine the order with respect to the Crystal Violet Dye (X in the example) –
2. The steps you took to determine the order with respect to the NaOH (Y in the example) –
3. The steps you took to determine k –
4. The overall, Modified Rate Law ■ With your values for X, Y, and k inserted into the equation –
5. Solve the Rate Law ■ Insert in all values necessary
6. find the concentration of crystal violet dye solution in each concentrations of NaOH.
Trial 1 with the 0.02803 M concentration
Answers
The calculations can be done by using formula given below. With the consideration of room temperature 71.8 F.
1. In order to determine the order of reaction with respect to the Crystal Violet dye (X in the example), we must take the derivative of the rate law equation with respect to X, which gives us the expression:
[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]
This equation tells us that the order of reaction with respect to X is x.
2. To determine the order of reaction with respect to the NaOH (Y in the example), we must take the derivative of the rate law equation with respect to Y, which gives us the expression:
[tex]-d[Y]/dt = k[X]^x[Y]^y.[/tex]
This equation tells us that the order of reaction with respect to Y is y.
3. To determine k, we must take the rate law equation, plug in the appropriate values, and solve for k. The equation we are solving is:
[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]
4. The overall, modified rate law with the appropriate values for X, Y, and k inserted into the equation is:
[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]
5. Solving the rate law, we get:
[tex]k = (-d[X]/dt) / (71.8^x[0.02803]^y).[/tex]
6. To find the concentration of crystal violet dye solution in each concentration of NaOH, we must use the equation:
[tex][X] = [X]0 + kt,[/tex]
where [X]0 is the initial concentration of crystal violet dye solution, k is the rate constant, and t is the time elapsed. Plugging in the appropriate values for each trial will give us the desired concentration of crystal violet dye solution for each concentration of NaOH.
For more such questions on room temperature , Visit:
https://brainly.com/question/17410084
#SPJ11
if we had 79.3 grams of xe, would we expect a volume that is greater than or less than that obtained with neon
Answers
If we had 79.3 grams of Xe, we would expect a volume that is greater than that obtained with neon.
The volume of a gas depends on the number of moles of gas, temperature, and pressure. The gas's molar mass is not a factor in determining the volume of the gas. The ideal gas law, PV = nRT, can be used to find the volume of a gas.
PV = nRT can be rearranged as V = (nRT)/P, where V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, T is the temperature, and P is the pressure of the gas. We can see that the volume of the gas is directly proportional to the number of moles of the gas. Therefore, a greater number of moles of gas would correspond to a larger volume.
If we had 79.3 grams of Xe, we can use the molar mass of Xe to find the number of moles of Xe. The molar mass of Xe is 131.29 g/mol.
Therefore, the number of moles of Xe would be:79.3 g Xe / 131.29 g/mol = 0.604 moles of Xe
On the other hand, if we had neon, which has a molar mass of 20.18 g/mol, the number of moles of neon would be 79.3g Ne / 20.18 g/mol = 3.93 moles of Ne
Therefore, we can see that the number of moles of neon is greater than the number of moles of Xe. Therefore, we would expect a greater volume of neon compared to Xe.
Know more about Neon here :
https://brainly.com/question/31187112
#SPJ11
THEORY 1. illustrate the formation of the Compound AIC 13 Electron dot representation.
Answers
The electron representation shows the electrons in the atoms as dots as in the image attached.
What is electron dot representation?An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.
Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.
Learn more about electron dot:https://brainly.com/question/25929171
#SPJ1
draw the structure of an alkene with one double bond that would give the following compound as the only product after ozonolysis followed by h2o2 .
Answers
The carbonyl group can be either a ketone or an aldehyde.
To draw the structure of an alkene with one double bond that would give the compound after ozonolysis followed by H2O2, you will need to draw a chain of two carbon atoms with one double bond connecting them.
The Lewis structure would look like this:This structure represents an alkene, as it contains one double bond between two carbon atoms. Ozonolysis followed by H2O2 would break the double bond and then reduce the two resulting aldehyde groups, forming the compound.An alkene is a hydrocarbon containing a carbon-carbon double bond (C=C). Hydrocarbons containing carbon-carbon triple bonds (C≡C) are known as alkynes.Ozonolysis is a chemical reaction in which ozone (O3) reacts with an unsaturated substance, breaking down the double or triple bonds and producing two oxygen atoms (O) per double bond in the process.
Alkenes and alkynes are usually oxidized in ozonolysis followed by hydrogen peroxide (H2O2).When ozonolysis is followed by H2O2, the products obtained are carbonyl compounds that differ from each other depending on the reaction conditions. The products of ozonolysis followed by H2O2 depend on the structure of the alkene. The only product of ozonolysis followed by H2O2 for an alkene is a mixture of aldehydes and ketones with one fewer carbon than the original alkene.The following are the steps to be followed for the given question:Step 1: Draw the structure of an alkene with one double bond. A double bond means that there is a C=C between two carbon atoms, as shown in the figure below.Step 2:
The structure of the alkene is shown below
Step 3: When the given compound undergoes ozonolysis followed by H2O2, it results in two carbonyl compounds with one fewer carbon than the original alkene. The compound in the question has three carbon atoms, so the two carbonyl compounds obtained from ozonolysis followed by H2O2 will have two carbon atoms.Step 4: The products obtained after ozonolysis followed by H2O2 are shown below:In this figure, R1 and R2 represent substituents on the carbonyl group. The products of ozonolysis followed by H2O2 depend on the structure of the alkene. So, the only product that can be obtained for the given alkene is shown below.
For more such questions on aldehyde
https://brainly.com/question/28259216?source=archive
#SPJ11
Identify the strongest acid
Select one:
a. H2O
b. H2Se
c. H2S
d. H2Te
Answers
Answer:
H2Te
Explanation:
Hydrogen telluride is the strongest acid among the options above.
The speed of sound in a solid medium is 15 times greater than that in air. If the frequency of a wave in the solid is 87 KHz, then what is the wavelength? ( The speed of sound in air is 344 m/s.) m
Answers
The wavelength of the sound in the solid medium, given that the speed of the sound in the solid is 15 times greater than that in air is 0.06 m
How do i determine the wavelength?The wavelength of a wave is defined by the following formular:
Velocity (v) = wavelength (λ) × frequency (f)
v = λf
The following data were obtained from the question:
Speed of sound wave in air (c) of = 344 m/sSpeed of sound in solid medium (v) = 15 × c = 15 × 344 = 5160 m/sFrequency (f) = 87 KHz = 87 × 1000 = 87000 HzWavelength (λ) = ?Velocity (v) = wavelength (λ) × frequency (f)
5160 = wavelength × 87000
Divide both sides by 87000
Wavelength = 5160 / 87000
Wavelength = 0.06 m
Therefore, we can conclude that the wavelength is 0.06 m
Learn more about wavelength:
https://brainly.com/question/30859618
#SPJ1
Weigh magnesium metal Complete the following steps: Place weighing paper on balance Use forceps to place magnesium o balance. Record exact mass in Lab Data Calculate moles of magnesium. Record in Lab Data Use forceps to place magnesium on bench near wires and stopper 0.215 g TARE Mass of magnesium (g) Moles of magnesium (mol) Temperature of water (°C) Temperature of water (K) Vapor pressure of water (mmHg) Barometric pressure (mmHg) 0.198 9
Answers
Moles of magnesium = 0.198 g / 24.31 g/mol = 0.00815 mol
What are the moles?
Based on the given data, we can calculate the moles of magnesium using the following formula:
moles of magnesium = mass of magnesium (g) / molar mass of magnesium
The molar mass of magnesium is 24.31 g/mol.
Thus, moles of magnesium = 0.198 g / 24.31 g/mol = 0.00815 mol
It seems that the experiment involves determining the mass and moles of magnesium. The temperature of water, vapor pressure of water, and barometric pressure are likely additional data points collected during the experiment for further analysis.
To know more about the moles, visit:
https://brainly.com/question/26416088
#SPJ1
cycloalkenes of seven or fewer atoms have a cis double bond geometry, since a trans geometry would introduce too much strain.
Answers
Cycloalkanes of eight or fewer more atoms have a cis double bond geometry. Since a trans geometry will introduce too much strain.
The cycloalkanes are defined as the monocyclic saturated hydrocarbons. It consists only of hydrogen and carbon atoms arranged in a structure containing a single ring and all of the carbon-carbon bonds are single. Cis and trans isomers are defined as the types of geometric isomers where the functional group is placed differently with regards to the double bond. A cis isomer has molecules on one side of the double bond that is why it cause too much strain in the ring. If the two substituents are on the same side of the double bond then the configuration of the bond is called cis double bond geometry. A trans isomer has molecules on the other side of the double bond as it forms cis double bond geometry.
To learn more about cis double bond geometry
https://brainly.com/question/30857701
#SPJ4
The complete question is,
cycloalkanes of eight or fewer atoms have a ---------- geometry.
Consider the following silica gel TLC plate of compounds A, B, and C developed in hexanes:
Consider the following silica gel TLC plate of com
a) Determine the R f values of compounds A, B, and C run on a silica gel TLC plate using hexanes as the solvent
b) Which compound, A, B, or C, is the most polar?
c) What would you expect to happen to the R f values if you used acetone instead of hexanes as the eluting solvent? (Think polarity of solvents)
Answers
The R f values for compounds A, B, and C on a silica gel TLC plate developed in hexanes would be determined by measuring the distance each compound traveled compared to the distance the solvent traveled.
a) There is a 4 cm gap between the origin and the solvent front. The Rf value for spot A is[tex]\frac{1.5}{4}= 0.375[/tex], because it travelled 1.5 cm. Due to the 3.5 cm movement of Spot B, its Rf is[tex]\frac{3.5}{4} = 0.875[/tex]. Spot C shifted 3 cm, making its Rf [tex]\frac{3}{4} = 0.75[/tex].
b)Due to its shorter travel distance than the other two compounds, compound A is the most polar. Recall that polar substances adhere to the adsorbent more readily, move less, and have a lower Rf value.
c)Hexanes is less polar than acetone as a solvent. Each of the three compounds would move more quickly if the same method were employed to elute them.The chemicals can be removed from the polar adsorbent more effectively with a more polar eluting solvent. Each compound would have a higher Rf value if acetone were used to elute the TLC plate as opposed to hexanes because each compound travels more quickly.
learn more about Rf value Refer:brainly.com/question/17796724
#SPJ1
is CF3Cl a polar or non-polar molecule?
Answers
Answer: Polar
Explanation: This is because if you look up the Lewis Dot structure of this specific molecule, it will have some net dipole moment, which makes it polar.
It can be considered that when a molecule does have some net dipole moment, it is polar.
So, yes CF3Cl is polar.
CF₃Cl, also known as chlorotrifluoromethane, is a polar molecule.
To determine the polarity of a molecule, consider the individual bond polarities and the molecular geometry.
In CF₃Cl, there is a difference in electronegativity between carbon (C) and chlorine (Cl), as well as between carbon and fluorine (F). Chlorine and fluorine are more electronegative than carbon, meaning they have a greater ability to attract electrons toward themselves.
The C-Cl bond and the C-F bonds in CF₃Cl are polar bonds due to the electronegativity difference. The Cl and F atoms pull the shared electrons towards themselves, creating partial negative charges on those atoms and partial positive charges on the carbon atom.
To learn more about the polar molecule, follow the link:
https://brainly.com/question/1946554
#SPJ6
please answer the question for BRAINLIEST asap
Using the formula M1V1 = M2V2 , if I add water to 100.0 mL of a 0.15 M NaOH solution until the final volume is 150 mL, what will the molarity of the diluted solution be?
Question 3 options:
0.23M
1.0M
0.10M
1.0E5M
Answers
Answer:
M2= 0,1 M
Explanation:
M1=0,15 M
V1= 100 mL =0,1 L
M2= ?
V2= 150 mL = 0,15 L
M1V1= M2V2
(0,15 mol/L) (0,1 L) = M2 (0,15 L)
0,015 mol / 0,15 L = M2
M2= 0,1 M
1. What volume of hydrogen gas at STP is produced from the
reaction of 50.0g of Mg and 75.0 grams of HCl? How much
of the excess reagent is left over (in grams)?
Answers
Answer:
1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol
Explanation:
HOPE THAT HELPS ! <3
Please help me thank you
Answers
The equilibrium constant for the reaction at 25 °C is 4.749.
ΔG for the reaction at body temperature is -4.899 kJ/mol.
How ot calculate equilibrium constant and change in free energy?The standard free energy change (ΔG°) of the reaction is given as -3.860 kJ/mol.
At 25°C, the equilibrium constant (K'eq) can be calculated using the following equation:
ΔG° = -RTlnK'eq
where R is the gas constant (8.314 J/molK) and T is the temperature in Kelvin (25°C = 298 K).
Converting the given units of ΔG° to joules/mol:
ΔG° = -3.860 kJ/mol = -3.860 × 10³ J/mol
Substituting the values in the equation:
-3.860 × 10³ J/mol = -(8.314 J/molK) × 298 K × lnK'eq
Solving for K'eq:
lnK'eq = 14.678
K'eq = e^(14.678) = 4.749 (rounded to three significant figures)
At 37.0°C, the ΔG for the reaction can be calculated using the following equation:
ΔG = ΔG° + RTln(Q)
where R is the gas constant (8.314 J/molK), T is the temperature in Kelvin (37.0°C = 310 K), and Q is the reaction quotient.
Q = [B]/[A] = 0.45/1.7 = 0.265
Substituting the values in the equation:
ΔG = -3.860 × 10³ J/mol + (8.314 J/molK) × 310 K × ln(0.265)
ΔG = -4.899 kJ/mol (rounded to three significant figures)
Learn more on general reactions here: https://brainly.com/question/12049042
#SPJ1
The question is:
Consider a general reaction
enzyme
A(aq) ⇔ B(aq)
The AG of the reaction is -3.860 kJ mol-1. Calculate the equilibrium constant for the reaction at 25 °C.
K'eq =_________
What is ΔG for the reaction at body temperature (37.0 °C) if the concentration of A is 1.7 M and the concentration of B is
0.45 M?
ΔG= ______ kJ mol-1
There are 7.68 × 1025 atoms of phosphorous in how many moles of diphosphorous pentoxide?
Answers
Answer:
7.68 x 1025 atoms of phosphorous correspond to 1.06 mole of diphosphorous pentoxide. This can also be written as 1.06 mol of P2O5.
According to the balanced equation, what is the theoretical mole ratio of baking soda to sodium chloride?
NaHCO3 + HCl = NaCl + CO2 + H2O
Answers
Answer:
Explanation:
1;1 since you do not need coefficients to balance the equation
What are the coefficients when the following reaction is properly balanced?
Si4C3 +o2 -> si2o3+ c
Answers
The balanced equation for the given reaction is:
4 Si4C3 + 15 O2 → 8 Si2O3 + 3 C
What is Balanced Chemical Equation?
The coefficients in a balanced chemical equation represent the stoichiometric relationship between the reactants and products. They show the relative amounts of each substance that are involved in the reaction. In the given chemical equation, Si4C3 + O2 -> Si2O3 + C, the coefficients can be determined by balancing the number of atoms of each element on both sides of the equation.
Starting with Si, there are 4 Si atoms on the left and 2 Si atoms on the right, so a coefficient of 2 is needed in front of Si2O3 to balance the number of Si atoms.
Moving on to C, there are 3 C atoms on the left and 1 C atom on the right, so a coefficient of 3 is needed in front of C to balance the number of C atoms.
Finally, for O, there are 2x3=6 O atoms on the left and 2x2=4 O atoms on the right, so a coefficient of 3 is needed in front of O2 to balance the number of O atoms.
The balanced equation is thus: Si4C3 + 3O2 -> 2Si2O3 + 3C, with coefficients of 1, 3, 2, and 3 for Si4C3, O2, Si2O3, and C, respectively.
Learn more about Balanced Chemical Equation from given link
https://brainly.com/question/29367108
#SPJ1
Straw like organ used to intake for and water or dispose of waste
Answers
A tube is the term used to describe the straw-like organ utilized by both plants and animals to consume food and water or to eliminate waste.
What is tube?A hollow, cylindrical structure that is often present in living things is referred to as a tube. Many biological structures, such as blood veins, intestines, respiratory tracts, and the reproductive system, contain tubes. Many biological functions, including the passage of nutrients, the exchange of gases, and the removal of waste materials, depend on tubes.
These tubes are referred to as xylem and phloem in plants. While the phloem moves sugars and other nutrients from the leaves to other parts of the plant, the xylem is in charge of moving water and minerals from the roots to the rest of the plant.
Animals have many species-specific tube-like organs in charge of intake and waste elimination. Mammals, for instance, have a sophisticated digestive system that consists of the anus, esophagus, stomach, and intestines. Together, these organs help the body digest food, extract nutrients, and get rid of waste.
Generally, tubes or channels are essential for both plant and animal life because they let them take in the substances they need and let waste out.
To know more about tube, visit:
https://brainly.com/question/30271755
#SPJ1
sulfur (s) belongs to the: select the correct answer below: halogens noble gases alkali metals chalcogens
Answers
Sulfur (S) belongs to the chalcogens, which is a group of elements located in Group 16 on the periodic table. So the correct option is D.
Chalcogens are characterized by their tendency to form compounds in which they have a -2 oxidation state. The chalcogens consist of oxygen (O), sulfur (S), selenium (Se), tellurium (Te) and polonium (Po).
The name “chalcogens” comes from the Greek words “chalkos” and “genes” which mean “ore forming.” This name was given because all the chalcogens form ores that are mined and used for industrial purposes.
Sulfur is a yellow, non-metallic element that is the third most abundant element in the Earth’s crust. It has been known since ancient times and is found in various minerals and volcanic gases. Sulfur has many uses, from being an essential element in proteins to being a key ingredient in explosives.
In conclusion, sulfur (S) belongs to the chalcogens, a group of elements located in Group 16 on the periodic table. This group is characterized by their tendency to form compounds in which they have a -2 oxidation state. Sulfur is a yellow, non-metallic element that is essential in proteins and is also a key ingredient in explosives. So the correct option is D.
For more such questions on chalcogens
https://brainly.com/question/29220016
#SPJ11
Given that 4 NH3 + 5 O2 → 4 NO + 6 H2O, if 3.00 mol NH3 were made to react with excess of oxygen gas, the amount of H2O formed would be
Answers
x mol H2O = 4.50 mol H2O
Step-by-step explanation:
From the balanced equation, we can see that for every 4 moles of NH3 that react, 6 moles of H2O are formed. Therefore, we can use a proportion to find the amount of H2O that would be formed if 3.00 mol of NH3 reacted:
4 mol NH3 : 6 mol H2O = 3.00 mol NH3 : x mol H2O
Solving for x, we get:
x mol H2O = (6 mol H2O / 4 mol NH3) * 3.00 mol NH3
x mol H2O = 4.50 mol H2O
Therefore, if 3.00 mol of NH3 were made to react with excess oxygen gas, 4.50 mol of H2O would be formed.
If 25 grams of sugar dissolves into 150 grams of water, what is the new weight of the liquid?
Answers
Answer:
175 grams
Explanation:
25+150=175
175 grams
The alkanes will react with halogens in photochemical reactions to produce haloalkanes.
1. What is a photochemical reaction?
2.Use the formation of chloromethane from methane and chlorine in the presence of UV light, to
explain the three stages involved in these photochemical reactions.
3.Give the equation for the overall reaction.
Answers
Answer:
Explanation:
A photochemical reaction is a chemical reaction that occurs due to the absorption of light energy. These reactions typically require high-energy radiation, such as ultraviolet or visible light, to initiate the reaction.
The three stages involved in the photochemical reaction between methane and chlorine to form chloromethane are:
i) Initiation: Chlorine molecules absorb high-energy UV radiation, which causes the chlorine bond to break homolytically, producing two chlorine radicals. This process requires energy and is endothermic.
Cl2 + energy (UV) → 2Cl•
ii) Propagation: The chlorine radical attacks a methane molecule, breaking the C-H bond and producing a methyl radical and HCl. The methyl radical then reacts with another chlorine molecule, producing another chlorine radical and chloromethane. The chlorine radical then continues to react with more methane molecules, propagating the reaction.
Cl• + CH4 → •CH3 + HCl
•CH3 + Cl2 → CH3Cl + Cl•
iii) Termination: In the termination stage, radicals combine to form products, which stops the propagation of the reaction. For example, two methyl radicals can combine to form ethane, or a chlorine radical and a methyl radical can combine to form methyl chloride.
•CH3 + •CH3 → C2H6
•CH3 + Cl• → CH3Cl
The overall reaction for the formation of chloromethane from methane and chlorine in the presence of UV light is:
CH4 + Cl2 + UV light → CH3Cl + HCl
fill in the blank. the electron transport chain harnesses the potential energy of the molecules___, which donate electrons to proteins in the electron transport chain.
Answers
The electron transport chain harnesses the potential energy of the molecules NADH and FADH2, which donate electrons to proteins in the electron transport chain.
NADH and FADH2 are coenzymes that help transfer electrons from metabolic reactions such as glycolysis, the citric acid cycle, and fatty acid oxidation. The electrons from NADH and FADH2 are passed from one electron carrier to another until they reach the terminal electron acceptor, which is usually oxygen. As the electrons are passed along the electron transport chain, energy is released and used to produce a form of energy that cells can use, called ATP. The energy produced by the electron transport chain is used by cells to do work, such as muscle contraction, active transport, and protein synthesis. The electron transport chain is a vital process that occurs in all cells, and it is responsible for the production of ATP, which is necessary for cells to function properly.
For more such questions on electron transport chain
https://brainly.com/question/876880
#SPJ11