The torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
A small 1.25 kg ball on the end of a light rod is rotated in a horizontal circle of radius 1.2 m.
The moment of inertia of the system about the axis of rotation and the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball can be calculated as follows:
Part (a)The moment of inertia, I of a solid ball is given by I = 2/5mr².
Here, m is the mass of the ball, and r is the radius of the ball.
We have to find the moment of inertia of the system about the axis of rotation.
Since the axis of rotation passes through the center of the ball, the moment of inertia of the ball is given by Iball = 2/5mr².
Thus, the moment of inertia of the system about the axis of rotation is given by I = Iball + mR²I = 2/5mr² + mR²I = m(2/5r² + R²)I = 1.25(2/5(0.06)² + (1.2)²)I = 0.026 kg.m²
Part (b)The torque required to keep the ball rotating at constant angular velocity can be calculated as follows:
τ = Iα
Here, τ is the torque,
I is the moment of inertia of the system, and
α is the angular acceleration.
At constant angular velocity, α = 0.
Since air resistance exerts a force of 0.02 N on the ball, the torque required to keep the ball rotating at constant angular velocity is
τ = Frτ = F × Rτ = 0.02 × 1.2τ = 0.024 N.m
Therefore, the torque needed to keep the ball rotating at constant angular velocity if air resistance exerts a force of 0.02 N on the ball is 0.024 N.m.
To know more about torque here
https://brainly.com/question/25708791
#SPJ11
a) When we blow air with our mouth narrow open, we feel the air cool. When the mouth
is made wide open, we feel the air warm. What are the thermodynamic processes involved in these processes? Explain. [2]
As the air is compressed, the work done on the air causes its temperature to increase.
What is Thermodynamic Process?
A thermodynamic process is a physical change that occurs in a system as it exchanges heat and/or work with its surroundings. It involves a change in one or more thermodynamic variables, such as temperature, pressure, volume, or entropy. There are four main types of thermodynamic processes: isothermal, adiabatic, isobaric, and isochoric.
When we blow air with our mouth narrow open, we feel the air cool because of the adiabatic expansion of the air. Adiabatic expansion is a thermodynamic process in which the air expands rapidly without losing or gaining any heat to or from the surroundings. As the air expands, it does work against the pressure of the surrounding atmosphere, and this work causes the temperature of the air to decrease. This is known as the Joule-Thomson effect.
On the other hand, when the mouth is made wide open, we feel the air warm because of the adiabatic compression of the air. Adiabatic compression is a thermodynamic process in which the air is compressed rapidly without losing or gaining any heat to or from the surroundings.
Learn more about Thermodynamic Process from given link
https://brainly.com/question/30190815
#SPJ1
Three substances that can make electricity. What are these substance
Copper, zinc, and lead-acid are three of the materials most frequently utilised in the production of electricity. Electrical wiring, motors, and other electronic devices frequently employ copper because it is a good conductor of electricity. Moreover.
Iithium-ion batteries, which power smartphones and other portable gadgets, utilise it in their construction. Another material that is frequently found in batteries, especially alkaline batteries, is zinc. Moreover, it is used to make brass and to stop corrosion in galvanised steel. Batteries of the lead-acid variety are frequently found in automobiles, trucks, and watercraft. Also, it is utilised in the backup power systems for structures and other institutions. Lead-acid batteries can be found for not too much money. They are a desirable option for many applications since they can be recycled. The materials listed above are only a handful of the numerous that can be used to create electricity. The particular substance selected for a given application will depend on elements including price, accessibility, and desired performance qualities.
learn more about electricity here:
https://brainly.com/question/8971780
#SPJ4
lifting the weight without a pulley requires a force of 400 newtons over a distance of 4 meters. how do these values change when the pulley is applied? (1 point) responses
A. the force increases, while the distance decreases. B. both the force and the distance decrease. C. the force decreases, while the distance increases. D. both the force and the distance increase.
When the pulley is applied, the force decreases, while the distance increases. The correct option is C. Therefore, when a pulley is used, the force required to lift the weight decreases, while the distance over which the force is applied increases.
When a pulley is used to lift a weight, the force required to lift the weight is reduced, while the distance over which the force is applied is increased. The pulley system distributes the weight of the object across multiple strands of rope or cable, reducing the amount of force required to lift the object.
In this case, the force required to lift the weight decreases when a pulley is used, as the weight is supported by two segments of rope or cable, each bearing half the weight. Therefore, the force required is effectively halved.
On the other hand, the distance over which the force is applied increases when a pulley is used. This is because the rope or cable must be pulled twice as far as the distance that the weight is lifted, due to the nature of the pulley system. As a result, the distance over which the force is applied is effectively doubled.
Therefore, when a pulley is used, the force required to lift the weight decreases, while the distance over which the force is applied increases.
For more such questions on Force
https://brainly.com/question/15251816
#SPJ11
assume a single-issue pipeline. show how the loop would look both unscheduled by the compiler and after compiler scheduling for both floating-point operation and branch delays, including any stalls or idle clock cycles. what is the execution time (in cycles) per element of the result vector, y, unscheduled and scheduled? how much faster must the clock be for proces- sor hardware alone to match the performance improvement achieved by the scheduling compiler? (neglect any possible effects of increased clock speed on memory system performance.)
Assuming a single-issue pipeline, the loop would look as follows when unscheduled by the compiler:
To know more compiler schedules about refer here: https://brainly.com/question/30008837#
#SPJ11
A parallel-plate capacitor is connected to a battery that maintains a constant potential difference V between the plates. If a dielectric is inserted between the plates of the capacitor, do the following quantities increase, decrease, or remain the same?
Part A
The electric field between the plates:
a) Increases
b) Decreases
c) Remains the same
Part B
The charge on the plates:
a) Increases
b) Decreases
c) Remains the same
Part C
The capacitance:
a) Increases
b)Decreases
c) Remains the same
Part D
The energy stored in the capacitor:
a) Increases
b) Decreases
c) Remains the same
When a dielectric is inserted between the plates of a parallel-plate capacitor connected to a battery that maintains a constant potential difference V, the electric field between the plates, the charge on the plates, the capacitance C, and the energy stored in the capacitor all undergo changes. These changes can be explained in the following way:
Part A: The electric field between the plates decreases.
Part B: The charge on the plates increases.
Part C: The capacitance increases.
Part D: The energy stored in the capacitor increases.
Explanation:
What is a capacitor?A capacitor is an electronic device that stores electric charge. The capacity of a capacitor to store an electric charge is called its capacitance, and it is calculated by the ratio of the charge on each plate to the potential difference between them. When a dielectric material is inserted between the plates of a capacitor, the capacitance of the capacitor increases since the electric field between the plates decreases, and the charge on the plates increases since the electric field is now being shared between the capacitor plates and the dielectric material. As a result, the energy stored in the capacitor increases since it is proportional to the square of the potential difference V and inversely proportional to the capacitance C.
Part A:
The electric field between the plates (c) decreases. This is because the electric field is equal to the potential difference (V) divided by the plate separation (d) V/D, and since the potential difference is constant, the electric field remains unchanged.
Part B:
The charge on the plates (a) increases. When a dielectric is inserted, the capacitance increases. Since the potential difference remains constant, the increased capacitance will result in an increased charge on the plates according to the formula Q = CV.
Part C:
The capacitance (a) increases. The insertion of a dielectric between the plates of the capacitor increases its capacitance by a factor of the dielectric constant (k) of the material. The new capacitance can be expressed as C= kC, where C is the initial capacitance.
Part D:
The energy stored in the capacitor (a) increases. The energy stored in a capacitor can be expressed as U = 0.5CV^2. Since the capacitance increases and the potential difference remains constant, the energy stored in the capacitor also increases.
To known more about capacitor visit:
https://brainly.com/question/17176550
#SPJ11
as noted in this chapter, plants help to reduce water runoff and soil erosion, both of which affect the health of streams and rivers by impacting water quality. soil erosion increases the silt load in water and this literally smothers living organisms, particularly plants and invertebrate species. runoff water can carry pollutants, particularly pesticides and herbicides from agricultural land. read the description of each landscape and rank them from best stream quality to worst stream quality. 1: streams cutting through small farms with several different crop types and natural vegetation buffers between the fields and the streams. 2: a large floodplain area covered with lowland forests and swamps full of emergent vegetation, with small streams cutting through the area. 3: an urban housing development where the trees growing along the streams were removed and replaced with lawns. 4: a system of large farms with no buffer vegetation between the fields and the streams that cut through the farms. question list (4 items) (drag and drop into the appropriate area) landscape 1 landscape 2 landscape 3 landscape 4 correct answer list best stream quality
Plants help to reduce water runoff and soil erosion, both of which affect the health of streams and rivers by impacting water quality.
Soil erosion increases the silt load in the water, which can smother living organisms, particularly plants and invertebrate species. Runoff water can carry pollutants, particularly pesticides, and herbicides from agricultural land.
Landscape 1 (streams cutting through small farms with a variety of crop types and natural vegetation buffers between the fields and the streams) would be the best quality, followed by Landscape 2 (a large floodplain area covered in lowland forests and swamps full of emergent vegetation, with small streams cutting through the area) and Landscape 3 (an urban housing development where the streams are surrounded by emergent vegetation).
Learn more about water quality at brainly.com/question/20848502
#SPJ11
What do the areas labeled x, y, and z represent? constructive interference in which waves cancel each other out constructive interference in which waves strengthen each other destructive interference in which waves cancel each other out destructive interference in which waves strengthen each other
The correct option is B, the areas labeled X, Y, and Z represent constructive interference in which waves strengthen each other.
Interference is a phenomenon that occurs when two or more waves interact with each other. In physics, waves can be described as a disturbance that travels through a medium, such as water or air. When two waves meet, they can either reinforce or cancel each other out, depending on their amplitudes and phases.
Constructive interference occurs when the peaks of two waves coincide, creating a larger amplitude than either wave alone. Destructive interference occurs when the peak of one wave coincides with the trough of another, resulting in a cancellation of the waves. Interference is a fundamental concept in many areas of physics, including optics, acoustics, and electromagnetism.
To learn more about Interference visit here:
brainly.com/question/16098226
#SPJ4
Complete Question:
The diagram shows monochromatic light passing through two openings.
What do the areas labeled X, Y, and Z represent?
A). constructive interference in which waves cancel each other out
B). constructive interference in which waves strengthen each other
C). destructive interference in which waves cancel each other out
D). destructive interference in which waves strengthen each other
a block of mass 0.243 kg is placed on top of a light, vertical spring of force constant 4 975 n/m and pushed downward so that the spring is compressed by 0.092 m. after the block is released from rest, it travels upward and then leaves the spring. to what maximum height above the point of release does it rise? (round your answer to two decimal places.)
The maximum height above the point of release that the block rises to is 0.17 meters.
To solve this problem, we can use the conservation of energy principle, which states that the initial potential energy of the block and spring system is equal to the final kinetic energy of the block. The initial potential energy is given by the formula:
PEi = (1/2)kx^2
where k is the force constant of the spring, and x is the compression of the spring. Plugging in the values, we get:
PEi = (1/2)(4,975 N/m)(0.092 m)^2 = 20.20 J
The final kinetic energy of the block is given by the formula:
KEf = (1/2)mv^2
where m is the mass of the block, and v is the velocity of the block at the maximum height. Since the block comes to a stop at the maximum height, its final velocity is zero. Therefore, we can equate the initial potential energy to the final kinetic energy:
PEi = KEf
Solving for v, we get:
v = sqrt(2PEi/m) = sqrt(2(20.20 J)/(0.243 kg)) = 2.41 m/s
Now, we can use the conservation of mechanical energy principle to find the maximum height h that the block rises to:
PEi + KEi = PEf + KEf
where PEf = mgh and KEi = 0. Plugging in the values, we get:
mgh = PEi + KEf = 20.20 J
Solving for h, we get:
h = PEi/(mg) = (20.20 J)/(0.243 kg)(9.81 m/s^2) = 0.17 m
Therefore, the block rises to a maximum height of 0.17 meters above the point of release.
For more similar questions on energy and mechanics:
brainly.com/question/16971063
#SPJ11
magnetic field lines always travel from __________.
Magnetic field lines always travel from the north pole of a magnet to its south pole. This means that the magnetic field lines always form closed loops that start from the north pole, curve around the magnet.
A magnet's magnetic field lines constantly go from its north pole to its south pole. These lines are used to represent a magnetic field, which is an area in space where magnetic forces are present, and their strength. The alignment of the magnet's north and south poles determines the path of the magnetic field lines. The magnetic fields of two magnets interact when they are brought close to one another, and the field lines change to reflect this interaction. A key idea in physics, magnetic field lines are used to explain a variety of phenomena, including the operation of electric motors, generators, and compasses.
learn more about magnetic field here
https://brainly.com/question/14848188
#SPJ4
A book is sitting on a shelf that is 3. 0 meters off the ground. Kinetic energy is found using the formula 1/2 times mass times speed. Potential energy is found by taking mass times g times height, with g as the constant, 9. 8 m/s squared. What is needed to determine the mechanical energy used to move this book?
The required mechanical energy used to move this book is calculated by the summation of kinetic energy and potential energy.
Mechanical energy M.E is constant in a system that has only gravitational forces or in an otherwise idealised system.
Given that, the method for calculating kinetic energy K.E is,
K.E = 1/2 × m × v²
where,
m is mass
v is velocity
Potential energy P.E is given as mass times g times height, with g as a constant 9.8 m/s².
P.E = m × g × h
where,
m is mass
g is gravity
h is height
Potential and kinetic energies combine to form mechanical energy.
So, mathematically,
M.E = K.E + P.E
"M.E = 1/2 × m × v² + m × g × h"
To know more about energy:
https://brainly.com/question/13864172
#SPJ4
What is an atom? Who were some of the scientists involved in discovering the atom? What particles are atoms composed of?
Hypothesis: Predict how the addition of subatomic particles will affect the structure and properties of an atom. (Example: I predict that adding more neutrons will affect . . .)
Protons, neutrons, and electrons make up an atom, which is the smallest unit of matter still capable of retaining an element's chemical properties.
Who discovered the atom and what is an atom?John Dalton, a scientist who lived in the early 19th century, observed that chemical elements appeared to join with one another in distinct weight units. He chose the term "atom" to describe these units since he believed those to be the basic building blocks of matter.
What types of particles make up atoms?Quarks and electrons are the two categories of fundamental particles that make up an atom. An region of electrons surrounds the nucleus of an atom. Every electron has a negative electrical charge. Quarks make up protons.
To know more about electrons visit:-
https://brainly.com/question/30784604
#SPJ1
consider a systen of two electrons that are seperated by a distance of 2 meters. the charge of an electron is -1.6*10^-19c, what in jouled is the potential energy of this syten
The potential energy of this system is -2.99 * 10^-7 J. Potential energy is the energy stored in an object due to its height.
Potential energy is also affected by gravitational acceleration and object height. The greater the mass of an object, the greater its potential energy.
The potential energy of this system of two electrons separated by a distance of 2 meters can be calculated using the equation PE = kQq/r, where
k is the Coulomb constant (8.99 * 10^9 Nm^2/C^2), Q and q are the charges of the two electrons (-1.6*10^-19C each), and r is the distance between them (2m).Plugging in the values given, we get:
PE = 8.99 * 10^9 Nm^2/C^2 * (-1.6 * 10^-19C)^2 / 2m
PE = -2.99 * 10^-7 J
Therefore, the potential energy of this system is -2.99 * 10^-7 J.
Learn more about energy potential: brainly.com/question/14427111
#SPJ11
an electromagnetic wave is transporting energy in the positive y direction. at one point and one instant the magnetic field is in the positive x direction. the electric field at that point and instant points in the
Energy is being transported in the positive y direction by an electromagnetic wave. The magnetic field is in the positive x direction at one spot and one moment. At that precise moment, the electric field is oriented in the "negative z" direction.
The given electromagnetic wave is transporting energy in the positive y direction. At one point and one instant, the magnetic field is in the positive x direction. Now we have to find the direction of the electric field at that point and instant. According to the right-hand rule, when the magnetic field is directed towards the positive x-axis, the electric field will be directed downwards along the negative z-axis. Therefore, the electric field at that point and instant points in the negative z direction.
To know more about electromagnetic wave:https://brainly.com/question/75996
#SPJ11
Does Life, evolutin On Earth Violate the Second Law of Thermodynamics?
Answer:
No, it doesn’t.
Explanation:
The second law of thermodynamics states that in a natural thermodynamic process, the sum of the entropies of the interacting thermodynamic systems increases. Equivalently, machines that spontaneously convert thermal energy into mechanical work are impossible.
If you combine milk and coffee, the entropy will rise until the mixture is entirely homogenous and you can no longer differentiate between the two substances. At that point, the mixture will be a single, dull hue.
But in the process of mixing up coffee, before it’s fully mixed together but after you have started mixing, you might notice some complex swirl patterns appear for a brief moment in the chaos before vanishing away.
That’s what human life is.
We’re not violating thermodynamics because if you take the system as a whole, including the sun and the earth, entropy is still increasing. The sun will eventually run out of fuel and die out. Eventually all suns will die out and the whole universe will be homogeneous and we will have heat death as the expanding universe rips complex atoms apart.
But there can be brief pockets of complexity within that system, that exists for a brief period of time, before eventually and inevitably fading away. It does not violate thermodynamics because entropy is still increasing in the system as a whole.
a block with a mass of 10 kg connected to a spring oscillates back and forth with an amplitude of 2 m. what is the approximate period of the block if it has a speed of 4 m/s when it passes through its equilibrium point?
By Conservation of Mechanical Energy, the energy of the block is the same throughout the motion. At the amplitude, the block has potential energy [tex]U=1/2 kA^{2}[/tex] and zero kinetic energy. At the equilibrium position, the block has kinetic energy and zero potential energy. Applying the Conservation of Mechanical Energy to these two points in the motion yields.
[tex]K[tex]1/2 kA^{2} + 0 = 0 + 1/2mv^{2} \\kA^{2} = mv^{2} \\k = mv^{2}/A^{2} = 10kg*(4m/s)^{2} = 40kg/s^{2}[/tex] 1/2 mv^{2}[/tex]
The block with a mass of 10 kg connected to a spring oscillates back and forth with an amplitude of 2 m and a speed of 4 m/s when it passes through its equilibrium point. The approximate period of the block is calculated using the equation T = 2π*√(m/k), where m is the mass and k is the spring constant. We can calculate the approximate period using the given information as
[tex]T = 2π*√(10/k)\\T = 2π*√(10kg/40kg/s^{2} )\\T = 3 sec[/tex],
For more information regarding this topic, you can check the below link
https://brainly.com/question/12622728
#SPJ11
A barber wants to set up a salon in a room measuring length 3m by 3m he has a simple wooden chair,three large mirrors & a bulb. Using the knowledge of shadows & reflection advise the barber on how to arrenge a good saloon using the only items he has
Here are some ideas for setting up the barber's salon based on the size of the space and the products available: The wooden chair should be positioned in the middle of the space, facing a wall.
The barber's workspace will be this. The room's other three walls should be covered with the three enormous mirrors. This will give the impression that there is more space present and enlarge the room. The mirrors should be angled to reflect both the client in the chair and the barber's work area. Over the chair, suspend the lightbulb from the ceiling. The barber salon will be able to operate in enough lighting thanks to this.The wooden chair should be positioned in the middle of the space, The barber can set up a white sheet or a reflecting surface to improve illumination even further.
learn more about salon here:
https://brainly.com/question/15582651
#SPJ
two cars approach an ice-covered intersection. one car, of mass 1.27 103 kg, is initially traveling north at 11.6 m/s. the other car, of mass 1.70 103 kg, is initially traveling east at 11.6 m/s. the cars reach the intersection at the same instant, collide, and move off coupled together. find the velocity of the center of mass of the two-car system just after the collision.
The center of mass of the two-car system can be found by taking the weighted average of the velocities of the two cars.
The velocity of the center of mass is the average of the two cars' velocities, weighted by their masses. The velocity of the center of mass is:
Velocity of Center of Mass = (1.27 x 103 kg x 11.6 m/s + 1.70 x 103 kg x 11.6 m/s) / (1.27 x 103 kg + 1.70 x 103 kg) = 11.60 m/s.
Read more about the topic velocity:
https://brainly.com/question/80295?source=archive
#SPJ11
a particle's velocity is described by the function vx=kt2 , where vx is in m/s , t is in s , and k is a constant. the particle's position at t0=0s is x0 = -5.40 m . at t1 = 2.00 s , the particle is at x1 = 5.80 m .
A particle's velocity is described by the function vx=kt2 , where vx is in m/s , t is in s , and k is a constant. The particle's position at t0=0s is x0 = -5.40 m. At t1 = 2.00 s , the particle is at x1 = 5.80 m. The value of k is 2.80 m/s2.
The given equation describes the velocity of a particle in terms of a constant, k, and time, t. The velocity, vx, is given in m/s. The initial position of the particle at t0=0s is x0=-5.40 m, and at t1=2.00 s the particle is at x1=5.80 m. To find the value of the constant k, we can solve the equation for the change in velocity Δvx.
Δvx = vx1 – vx0 = k(t12 – t02)
Δvx = 5.80 – (-5.40) = 11.20 m/s
k = (11.20 m/s) / (2.002 s2) = 2.80 m/s2
Now that we have found the value of the constant k, we can use it to find the velocity of the particle at any time t. For example, at t2=4.00 s the velocity of the particle is vx2=11.20 m/s. This can be calculated using the equation vx2 = k(t22) = 2.80(4.002) = 11.20 m/s.
From the velocity equation, we can also calculate the position of the particle at any time t. The position of the particle at t2=4.00 s is x2= 11.20(4.00) = 44.80 m. We can also calculate the position of the particle at any other time t, by simply substituting in the corresponding value of t into the equation.
In conclusion, the equation vx = kt2 describes the velocity of a particle in terms of a constant, k, and time, t. Using this equation, we can calculate the velocity and position of the particle at any given time.
For more such questions on Velocity.
https://brainly.com/question/14528397#
#SPJ11
Complete Question:
A particle’s velocity is described by the function vx = [tex]kt^2m/s[/tex], where k is a constant and t is in s. The particle’s position at [tex]t_0[/tex] = 0s is [tex]x_0[/tex] = -5.40 m. At [tex]t_1[/tex] = 2.00 s, the particle is at [tex]x_1[/tex] = 5.80 m. Determine the value of the constant k. Be sure to include the proper units
a comet orbiting the sun has a perihelion distance of 1 au. at aphelion, it is at 37 au. what is the ratio of its speed at perihelion to its speed at aphelion?
The ratio of the speed of a comet at perihelion to its speed at aphelion is 6.08:1.
The ratio of the speed of a comet at perihelion to its speed at aphelion can be found using Kepler's second law. Kepler's second law states that "the line from the sun to a planet sweeps equal areas in equal times."
The distance between the sun and the comet at perihelion is 1 AU, and the distance between the sun and the comet at aphelion is 37 AU. So, the distance traveled by the comet in the orbit is 37 + 1 = 38 AU.
The time taken to complete the orbit is the same at both perihelion and aphelion. So, the area swept by the comet in its orbit at perihelion is equal to the area swept at aphelion.
Since the area of an ellipse is given by the formula A = πab, where a is the semi-major axis, and b is the semi-minor axis, the area swept by the comet in its orbit is proportional to the product of the semi-major and semi-minor axes. The semi-major axis is (37 + 1)/2 = 19 AU, and the semi-minor axis is √(37*1) = √37 AU.
So, the ratio of the semi-major axes of the ellipse at perihelion and aphelion is
19²:√37² = 361:37
The ratio of the velocity of the comet at perihelion and aphelion is proportional to the ratio of the semi-major axes. So, the ratio of the velocity of the comet at perihelion to its velocity at aphelion is 361:37 = 6.08:1
Therefore, the speed of a comet at perihelion has a ratio to its speed at aphelion of 6.08:1.
Learn more about Kepler's second law here: https://brainly.com/question/4639131.
#SPJ11
the maximum energy of photoelectrons from aluminium is 2.3 ev for radiation of 2000 a and 0.90 ev for radiation of 3130 a. use this data to calculate plancks constant and the work function of aluminium
The maximum energy of photoelectrons from aluminium is 2.3 eV for radiation of 2000 Å and 0.90 eV for radiation of 3130 Å.
To calculate Planck's constant and the work function of aluminium, we need to use the equation:
h = E2 - E1/ λ2 - λ1
Where h is Planck's constant, E1 and E2 are the maximum energy of photoelectrons for each wavelength, and λ1 and λ2 are the wavelengths.
Using the given data, we have:
h = (2.3 - 0.90) / (2000 - 3130)
Therefore, h = -1.4 eV / -930 Å, which simplifies to h = 0.0015 eVÅ.
The work function of aluminium is equal to the maximum energy of the photoelectrons for the longest wavelength, in this case, 0.90 eV. Therefore, the work function of aluminium is 0.90 eV.
Learn more about photoelectrons at brainly.com/question/16772624
#SPJ11
a 35.0-g bullet strikes a 5.0-kg stationary piece of lumber and embeds itself in the wood. the piece of lumber and bullet fly off together at 7.9 m/s. what was the original speed of the bullet?
The original speed of the bullet can be calculated using the law of conservation of momentum and the original speed of the bullet is 45.5 m/s.
What is the original speed of bullet?This states that the momentum of the system (bullet + lumber) before the collision must be equal to the momentum of the system after the collision. Momentum is defined as the mass multiplied by velocity.
Let m bullet be the mass of the bullet and v bullet be the initial velocity of the bullet.
Before the collision, the total momentum of the system is mass bullet × velocity bullet.
After the collision, the total momentum of the system is (m bullet + 5.0 kg) × 7.9 m/s.
Therefore, m bullet × v bullet = (m bullet + 5.0 kg) × 7.9 m/s.
Solving for v bullet gives v bullet = (m bullet + 5.0 kg) × 7.9 m/s / m bullet.
Substituting m bullet = 35.0 g gives v bullet = (35.0 g + 5.0 kg) × 7.9 m/s / 35.0 g.
Therefore, the original speed of the bullet is 45.5 m/s.
Read more about Momentum here:
https://brainly.com/question/30677308
#SPJ11
1. when a two-degree-of-freedom system is subjected to a harmonic force, the system vibrates at the a. frequency of applied force b. smaller natural frequency c. larger natural frequency
When a two-degree-of-freedom system is subjected to a harmonic force, the system vibrates at the smaller natural frequency. The correct answer is Option B.
A two-degree-of-freedom system consists of two masses connected by springs and/or dampers. The system has two degrees of freedom since both masses are free to move horizontally.
The natural frequencies of a two-degree-of-freedom system can be found by using the characteristic equation of the system. In the case of a harmonic force being applied to the system, the system will vibrate at the frequency of the smaller natural frequency. The smaller natural frequency is the frequency at which the system will experience resonance when subjected to a harmonic force.
Resonance is a condition that arises when an object is subjected to a periodic force that has a frequency that is equal to the natural frequency of the object.
Learn more about natural frequencies here: https://brainly.com/question/27707660.
#SPJ11
Table 15.3 in the textbook gives an estimate for the sound intensity of a whisper at 1.0 m. What is the sound intensity of a whisper at a distance of 2.5 m , in W/m2?
What is the corresponding sound intensity in dB?
The corresponding sound intensity in dB is 12 dB. The sound intensity of a whisper at a distance of 2.5 m is calculated using the formula: I₁/I₂ = (r₂/r₁)²
What is sound intensity?Sound intensity, also known as acoustic intensity, is defined as the power carried by sound waves per unit area in a direction perpendicular to that area.
I₁/I₂ = (r₂/r₁)²
Where I₁ is the sound intensity at a distance of 1.0 m,
I₂ is the sound intensity at a distance of 2.5 m,
r₁ is the distance from the source to the listener at 1.0 m and
r₂ is the distance from the source to the listener at 2.5 m.
sound intensity of a whisper at 1.0 m = 10^-10 W/m²
Formula to find the sound intensity of a whisper at 2.5 m:
I₁/I₂ = (r₂/r₁)²I₂
= I₁ (r₁/r₂)²I₂
= 10^-10 × (1/2.5)²I₂
= 10^-10 × (0.4)²I₂
= 10^-10 × 0.16I₂
= 1.6 × 10^-11 W/m²
The corresponding sound intensity in dB:
β = 10 log (I/I₀).
Where I₀ is the threshold of hearing (10^-12 W/m²)
β = 10 log (I/I₀)
β = 10 log (1.6 × 10^-11 / 10^-12)
β = 10 log (16)β = 10 × 1.2041
β = 12.041 ≈ 12 dB
Therefore, the corresponding sound intensity in dB is 12 dB.
To know more about sound intensity:
brainly.com/question/17062836
#SPJ11
When the rock hlt Cesar, the impact was softened by several protective features of the head. Which of the following structures would have helped to protect the brain from the external force? View Available Hint() Bone Oligodendrocytes Cerebrospinal fluid Basal ganglia Hair Dura mater White matter
The structure that would have helped to protect the brain from the external force when the rock hit Cesar are as follows: Dura mater and Cerebrospinal fluid.
What is the central nervous system? The central nervous system (CNS) is responsible for processing incoming stimuli from the peripheral nervous system and producing a coordinated response. It includes the brain and the spinal cord.
The brain is the largest component of the CNS, comprising 2% of the body's weight but consuming about 20% of its oxygen and nutrients. It consists of three main parts: the brainstem, the cerebellum, and the cerebrum.
The brainstem is responsible for regulating critical functions like respiration, circulation, and digestion; the cerebellum controls motor coordination, and the cerebrum is the area of the brain responsible for sensory perception, emotion, and movement.
What is external force? External forces, also known as contact forces, are forces that act on an object as a result of its interaction with its surroundings. Forces that do not require contact to take effect, such as gravitational and magnetic forces, are not considered external forces.
Examples of external forces are gravity, air resistance, tension, and friction. Dura mater and Cerebrospinal fluid as the structure that would have helped to protect the brain from the external force when the rock hit Cesar. When a rock hits Cesar, the external force created by it must be transferred to the skull, and ultimately the brain.
However, several protective features of the head help to reduce the severity of the impact. The brain is protected by two main structures: the dura mater and the cerebrospinal fluid.
The dura mater is the outermost layer of the meninges, which is a protective membrane covering the brain and spinal cord. It acts as a cushion, absorbing some of the external force generated by the impact.
Cerebrospinal fluid is a clear liquid that flows throughout the central nervous system, filling the space between the brain and the skull. It acts as a shock absorber, reducing the impact's intensity by distributing the force more evenly.
To know more about central nervous system, refer here:
https://brainly.com/question/29974261#
SPJ11#
what force counteracts the vertical pressure gradient force, preventing the atmosphere from accelerating out to space?
The force that counteracts the vertical pressure gradient force and prevents the atmosphere from accelerating out to space is the force of gravity.
The force that counteracts the vertical pressure gradient force and prevents the atmosphere from accelerating out to space is the force of gravity. The Earth's gravity acts on the atmosphere, pulling it towards the Earth's surface. This force is what keeps the atmosphere in place and prevents it from escaping into space.
In more detail, the vertical pressure gradient force arises due to differences in atmospheric pressure at different altitudes. As air moves from an area of high pressure to an area of low pressure, it experiences a net force that accelerates it vertically. However, gravity also acts on the air, pulling it towards the Earth's surface.
Learn more about gravity here
brainly.com/question/14874038
#SPJ4
a 1540-kg parked truck has a wheel base of 3.13 m (this is the distance between the front and rear axles). the center of mass of the truck is 1.3 m behind the front axle. (a) what is the force exerted by the ground on each of the front wheels? [4000,5000] n (b) what is the force exerted by the ground on each of the back wheels? [3000,4000] n hint: this is a chapter 12 equilibrium problem. remember that the truck has four wheels, not just the two you can see in the drawing.
The force exerted by the ground on each of the front wheels is 4532 N. and the force exerted by the ground on each of the back wheels is 6108 N.
a) Calculation of the force exerted by the ground on each of the front wheels of a 1540-kg parked truck
The force exerted by the ground on each of the front wheels can be calculated as follows:
First, calculate the weight of the truck using the
formula: w=mg
Where w is the weight of the truck,
m is the mass of the truck, and
g is the acceleration due to gravity.
Substituting the given values in the formula, we have:
w=mg=1540×9.8=15172 N
Next, calculate the moment of the weight of the truck about the rear axle using the formula: mr =w×(l−d)
Where mr is the moment of the weight of the truck about the rear axle,
w is the weight of the truck,
l is the wheelbase, and
d is the distance between the center of mass and the front axle.
Substituting the given values in the formula, we have:
mr=15172×(3.13−1.3)=24967.84 Nm
Since the truck is in equilibrium, the force exerted by the ground on each of the front wheels must be equal to the weight of the truck minus half of the moment of the weight of the truck about the rear axle, divided by the distance between the front and rear axles.
Therefore, we have F=½(w×l−mr)/
where F is the force exerted by the ground on each of the front wheels. Substituting the given values in the formula, we have F=½(15172×3.13−24967.84)/3.13=4532 N
b) Calculation of the force exerted by the ground on each of the back wheels of a 1540-kg parked truck.
The force exerted by the ground on each of the back wheels can be calculated as follows:
Since the truck is in equilibrium, the force exerted by the ground on each of the back wheels must be equal to the weight of the truck minus the force exerted by the ground on each of the front wheels.
Therefore, we have: F= w−2Ff
Where F is the force exerted by the ground on each of the back wheels, and Ff is the force exerted by the ground on each of the front wheels.
Substituting the given values in the formula, we have: F=15172−2×4532=6108 N
To know more about Force: https://brainly.com/question/12785175
#SPJ11
the strength of the magnetic field around a permanent magnet is strongest....
The strength of the magnetic field around a permanent magnet is strongest at the poles of the magnet.
The magnet's two extremities at which the magnetic field lines emerge (north pole) or converge are known as the poles (south pole). Due to the magnetic field lines' close proximity to one another, the magnetic field is strongest close to the poles. The magnetic field intensity drops and the field lines stretch out as you move away from the poles. It's crucial to remember that the size and power of a permanent magnet affect how strong the magnetic field is around it. The magnetic field strength at a magnet's poles increases with magnet size and strength. The magnet's form can also have an impact on how powerful its magnetic field is. A bar magnet, for instance, will have a stronger magnetic field.
Learn more about magnetic field here:
https://brainly.com/question/14848188
#SPJ4
distinguish between linear momentum and angular momentum. group of answer choices A. angular momentum depends on tangential velocity, whereas linear momentum depends on the rotational velocity. B. angular momentum depends on the total mass, whereas linear momentum depends on the distribution of mass. C. angular momentum depends on the distribution of mass, whereas linear momentum depends on the total mass. D. angular momentum depends on the distribution of mass times the total mass, whereas linear momentum depends only on the distribution of mass.
Linear momentum refers to the physical quantity of motion possessed by a body due to its mass and velocity, whereas angular momentum refers to the physical quantity of motion possessed by a body due to its mass and rotation hence C is the correct option.
Linear momentum is defined as the product of the mass of the object and the velocity of the object. For a given object, the linear momentum is proportional to its mass and velocity. The momentum of a system of objects is the sum of the momenta of its individual objects.Angular momentum, on the other hand, is the rotational equivalent of linear momentum. It is defined as the product of the moment of inertia and the angular velocity of an object. Angular momentum is proportional to the moment of inertia and angular velocity of the object.
The moment of inertia of an object depends on its shape and the way its mass is distributed about its axis of rotation. The angular momentum of a system of objects is the sum of the angular momenta of its individual objects. Option (C) angular momentum depends on the distribution of mass, whereas linear momentum depends on the total mass. is the correct answer.
More on momentum: https://brainly.com/question/30754592
#SPJ11
find the energy (in terms of kt) above the fermi level, for which the fermi-dirac probability is within 1% of the boltzmann approximation.
The energy above the Fermi level, in terms of kT, for which the Fermi-Dirac probability is within 1% of the Boltzmann approximation is kT/2.
This is because the Boltzmann approximation is valid for energies much larger than the Fermi energy, so in this case the energy is kT/2, where k is the Boltzmann constant and T is the temperature. The Fermi-Dirac probability is then within 1% of the Boltzmann approximation.
Learn more about fermi level at: brainly.com/question/19091696
#SPJ11
If the velocity field is V = (y-1)i + (x)j
what is the direction of the flow? for credit, include hand-calculations under assignment's tab and test 2 dropbox access. carefully identify the problem number.
The direction of the flow of the object in space can be calculated by unit vector of the velocity field.
What is the direction of flow?The given velocity field is V = (y-1)i + (x)j. Let's assume a unit vector, u in the direction of the flow, then the direction of the flow is the same as the direction of the vector, u.
To find the direction of the vector u, we can use the following formula: u = V/|V|
where |V| is the magnitude of the vector V. Since V = (y-1)i + (x)j, we have |V| = sqrt((y - 1)² + x²)
Hence, the unit vector, u in the direction of the flow is given by: u = V / |V| = ((y-1)i + (x)j) / sqrt((y - 1)² + x²)
Therefore, the direction of the flow is given by the unit vector u = ((y-1)i + (x)j) / sqrt((y - 1)² + x²).
Learn more about Vector here:
https://brainly.com/question/29740341
#SPJ11