A particle of charge q is fixed at point P, and a second particle of mass m and the same charge q is initially held a distance r1 from P. The second particle is then released. Determine its speed when it is a distance r2 from P. Let q=3.1 μC,m=20 mg,r1=0.90 mm, and r2=2.5 mm.

Answer:

The mass remains the same since stoichiometrically one mole reacts and one mole is formed

Explanation:

Calcium chloride is reacting with Sodium sulphate to form a white precipitate of calcium sulphate.

[tex]{ \sf{CaCl _{2} + Na_{2} SO_{4} → CaSO _{4} + 2NaCl}}[/tex]

From the equation, 1 mole of calcium chloride forms 1 mole of calcium sulphate.

R.F.M of CaCl2 = 40 + (35.5×2) = 111

R.F.M of CaSO4 = 40 + 32 + (16×4) = 136

R.F.M of Na2SO4 = (23×2) + 32 + (16×4) = 142

R.F.M of 2NaCl = 2[23 + 35.5] = 117

[tex]{ \sf{(r.f.m \: of \: rectants) = (r.f.m \: of \: products)}} \\{ \sf{ (mass \: of \: rectants) = (mass \: of \: products)}} \\ \\ { \sf{(111 + 142) = (136 + 117)}} \\ { \sf{300.23 = x}} \\ \\ { \sf{x = \frac{300.32}{(111 + 142)} \times (136 + 117) }} \\ \\ { \sf{x = \frac{300.32}{253} \times 253 }} \\ \\ { \sf{x = 300.32}}[/tex]

Answer:

The mass remains the same

Explanation:

Answer:

Explanation:

a) The mass of the cube can be calculated using the equation Mass = Volume x Density. The volume of the cube can be calculated as (5.00×10 cm)^3 = 125 cm³. Substituting this volume into the equation gives Mass = 125 cm³ x 7.86 g/cm³ = 983.5 g.

b) The number of iron atoms in the cube can be calculated using Avogadro's number (6.02 x 10^23 atoms/mol). The number of moles can be calculated using the molar mass of iron, 55.9 g/mol. Thus, the number of moles can be calculated as 983.5 g / 55.9 g/mol = 17.61 moles. Multiplying this by Avogadro's number gives the number of iron atoms in the cube as 1.07 x 10^24 atoms.

The magnetic field at the center of the loop is calculated to be 0.159 T.

The magnetic field at the center of a flat, circular loop with 17 turns, a radius of 12.5 cm, and a current of 0.60 A can be determined by using the equation B = µ₀.n.I/2.π.r, where

Using this equation, the magnetic field at the center of the loop is calculated to be 0.159 T.

Learn more about magnitude of the magnetic field: brainly.com/question/30640184

#SPJ11

The normal force of the car is equal to the weight of the car,  2,652.56 N. The maximum speed the car can have without losing contact with the road is equal to the square root of the product of the normal force of the car and the radius of the hill. That is,9.87 m/s.

A car with a mass of 720kg going over a hill at 12 m/s can be represented by the following Free Body Diagram (FBD):
The normal force of the car can be calculated using the equation
 Normal Force = m × g × cos θ
 where m is the mass of the car, g is the gravitational acceleration (9.81 m/s2), and θ is the angle of the hill.
 Therefore, Normal Force = 720kg × 9.81 m/s2 × cos 70° = 2,652.56 N.
 The maximum speed that the car can have without losing contact with the road at the top of the hill is equal to the square root of the equation
 v2 = (2 × Normal Force × Radius of Curvature) / m
where v is the speed of the car, Normal Force is the calculated normal force of the car, and m is the mass of the car.
Therefore, the maximum speed of the car = √[(2 × 2,652.56 N × 70 m) / 720kg] = 9.87 m/s.  

Therefore normal force of car is 2,652.56 N and maximum speed of car is 9.87 m/s.

To know more about Normal force please visit :

https://brainly.com/question/2254109

#SPJ11

The potential energy of the ball at this point is maximum as the ball has the highest height at this point.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is zero, its momentum is also zero.
Momentum = 0, KE = 0, PE > 0
Hence, the ranks of quantities at each point are as follows:
A) C, B = D, A
B) C, B = D, A
C) A, B = D, C

The ball is at rest at the left of the metal track. It is assumed to have enough friction to roll, but not enough to reduce its speed. In this question, we have to rank the quantities from the greatest to the least at each point. Given below are the quantities that are to be ranked,

a) Momentum,

b) KE,

c) PE.
Rank of quantities at each point:
At point A: Here, the ball has the maximum height. It is at rest at this point. At this point, the ball has the highest potential energy, PE.
PE>KE=0
The velocity of the ball at this point is zero. Hence, the kinetic energy of the ball is zero.
The momentum of the ball is given by the product of mass and velocity. As the velocity of the ball is zero, its momentum is also zero.
Momentum = 0, KE = 0, PE > 0
At point B: At this point, the ball has converted some of its potential energy into kinetic energy. The ball has lost some of its height, and hence, its potential energy.
[tex]PE>BKE, KE>BPE[/tex]
As the ball is moving, it has some velocity. Hence, it has kinetic energy.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is non-zero, its momentum is also non-zero.
Momentum > 0, KE > 0, PE < 0
At point C: At this point, the ball has lost all its potential energy, and all of it is converted into kinetic energy.
[tex]KE>CPE, PEC=0[/tex]
The velocity of the ball is the highest at this point. Hence, the kinetic energy of the ball is the highest at this point.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is the highest at this point, its momentum is also the highest.
Momentum > 0, KE > 0, PE = 0
At point D: At this point, the ball has lost all its kinetic energy due to friction. Hence, it comes to rest at this point.
KE=0, PED>0

for such more questions on momentum

https://brainly.com/question/1042017

#SPJ11

Because we measured the altitude from the Earth's centre, which is below the surface, the outcome is negative. As a result, the observatory is located 6.37 km below sea level.

Most importantly, placing an observatory on a mountainside means that there is less air to look through, improving the quality of the "seeing". Moreover, there is less air above you on a mountainside to absorb starlight.

The following is the equation for gravitational acceleration at a distance from the Earth's centre:

g = G M / r²

Given that the observatory is located r kilometres above the Earth's surface, we have:

g = G M / (r + Rearth)²

where Rearth is the Earth's radius. The observatory's altitude, h, can be calculated using the following formula:

gsealevel - g = 0.0055 m/s²

G M / (r + Rearth)² - G M / Rearth² = 0.0055 m/s²

G M (1/Rearth² - 1/(r + Rearth)²) = 0.0055 m/s²

r + Rearth = sqrt(G M / (0.0055 m/s² Rearth²) + Rearth²)

r = sqrt(G M / (0.0055 m/s² Rearth²) + Rearth²) - Rearth

Plugging in the values for G, M, and Rearth, we get:

r = sqrt((6.6743 × 10⁻¹¹ m³ kg⁻¹ s⁻²) × (5.9722 × 10²⁴ kg) / (0.0055 m/s² × (6.37 × 10⁶ m)²) + (6.37 × 10⁶ m)) - 6.37 × 10⁶ m

r = 2859.9 m

Therefore, the altitude of the observatory is:

h = r - Rearth = 2859.9 m - 6.37 × 10⁶ m = -6.37 × 10⁶ m + 2859.9 m

h = -6.367 × 10⁶ m

To know more about acceleration visit:-

https://brainly.com/question/8051219

#SPJ1

If the metal sphere is positively charged, then the excess electrons will move to the metal sphere. But if it's negatively charged, the excess electrons will repel the metal sphere.

A resultant force of 5437 N would accelerate an 810 kg mass at 6.7 m/s². The answer that you have entered is 5427 and that is why it says incorrect.

A resultant force is the single force that represents the combined effect of two or more forces acting on an object. It is the net force that results from the vector sum of all the individual forces. The direction and magnitude of the resultant force determine the motion of the object, whether it is at rest, moving at a constant velocity, or accelerating.

To calculate the resultant force, we can use the formula:

Resultant force = mass x acceleration

Plugging in the given values, we get:

Resultant force = 810 kg x 6.7 m/s²

Resultant force = 5437 N

Therefore, a resultant force of 5437 N would accelerate an 810 kg mass at 6.7 m/s².

To find out more about resultant forces, visit:

https://brainly.com/question/16380983

#SPJ1

1) It was taught by Jesus: The Lord's Prayer is also known as the "Our Father," and it was taught by Jesus himself in the Gospels of Matthew and Luke. Catholics believe that because it was given by Jesus, it has a special significance and authority. It is seen as a direct communication with God, and as such, it holds great value and importance in the Catholic faith.

2) It is a model for Christian prayer: The Lord's Prayer is also considered important because it serves as a model for Christian prayer. It contains the essential elements of Christian prayer, including worship, petition, confession, and intercession. By reciting the Lord's Prayer, Catholics learn how to pray, and it helps them to develop a deeper relationship with God. Additionally, the Lord's Prayer is a communal prayer, meaning it is meant to be recited by groups of people together. This sense of communal prayer helps to strengthen the Catholic community and provides a shared spiritual experience for Catholics around the world.

The magnitude of the difference amongst the two vectors is sqrt (13) units.

Let's call the two vectors A and B. We can use the Law of Cosines to find the magnitude of their difference:

|A - B|^2 = |A|^2 + |B|^2 - 2|A||B|cosθ

where θ is the angle between the two vectors.

Substituting the given values, we get:

|A - B|^2 = (3) ^2 + (4) ^2 - 2(3)(4) cos60°

Simplifying, we get:

|A - B|^2 = 9 + 16 - 12

|A - B|^2 = 13

Taking the square root of both sides, we get:

|A - B| = sqrt (13)

Therefore, the magnitude of the difference between the two vectors is sqrt (13) units.

To know more about Magnitude:

https://brainly.com/question/14452091

#SPJ4

Parts of the mixer become hot because some of the electrical energy is converted into heat energy.

When electrical energy flows through a wire, it encounters resistance, which causes the wire to heat up. In a mixer, the electric motor converts electrical energy into mechanical energy to rotate the blades, but some of the electrical energy is lost as heat due to resistance in the motor's winding and other electrical components. This heat energy can accumulate in the mixer's parts and cause them to become hot. In many electrical devices, heat is an undesirable byproduct of energy conversion and can lead to reduced efficiency, damage, or safety hazards.

To know more about electrical energy, here

brainly.com/question/16182853

#SPJ4

--The complete Question is,  Fill in the blanks. " Parts of the mixer become hot because some of the electrical energy is changed into____"--

A and D options represent the equations that best describe the relationship between the net work done on a point object and the change in kinetic energy of the object.

The equation which best describes the relationship between the net work done on a point object and the change in kinetic energy of the object is W = ΔK (change in kinetic energy). Work is defined as the transfer of energy to an object by a force that moves the object a distance. When a force does work on an object, it changes the object's energy. This change in energy is directly proportional to the work done.

If the work done on an object is zero, then the object's energy doesn't change. Mathematically, it is written as:

W = ΔE. The most appropriate equation that expresses the relationship between work and kinetic energy. In this equation, W is the net work done on the object, and ΔK is the change in kinetic energy of the object.

Therefore, the correct options are A and D.

Learn more about Work here:

https://brainly.com/question/29989410

#SPJ11

The difference between series and parallel circuits is that series circuits connect devices one after another, while parallel circuits connect devices along branched pathways.

In addition, series circuits are open, while parallel circuits are open.

Let's explore series and parallel circuits in more detail.

A series circuit is an electrical circuit in which the elements are arranged sequentially, allowing the current to flow through each of them in turn. All of the components in a series circuit are connected in a single, closed loop, with the current passing through each component in sequence. For the current to flow, all components in a series circuit must be connected, and there can be no branching paths.

A parallel circuit is an electrical circuit in which the elements are connected along branched pathways, allowing the current to flow through each of them simultaneously. The current will pass through each component regardless of whether the other components are in use. In a parallel circuit, the current is divided among the components according to their individual resistance. There are multiple paths for the current to follow in a parallel circuit, with each component having its own path.

To summarize, series circuits connect devices one after another, while parallel circuits connect devices along branched pathways. Series circuits are open, while parallel circuits are open.

To know more about "series and parallel circuits" refer here:

https://brainly.com/question/14997346#

#SPJ11

The photovoltaic cells use solar energy to produce electricity. therefore option d. solar energy is correct.

Solar energy is the energy from the sun that is converted into thermal or electrical energy. This is done by capturing the sun's rays and converting them into usable energy. Photovoltaic cells use the solar energy that is incident on the surface of the cell, which is then converted into electrical energy. This electrical energy can then be used to power lights, appliances, and other electronics.
The process of photovoltaic cells converting solar energy into electrical energy begins with the photon particles of the sun's rays being absorbed by the photovoltaic cells. The absorbed energy is then converted into direct current (DC) electricity by a process called the photovoltaic effect. This DC electricity is then used to power various appliances and other devices that are connected to the photovoltaic cells.
The photovoltaic cells convert solar energy into electricity by taking advantage of the fact that the photons of light have energy. When the photons hit the semiconductor material, electrons become freed from the material and are allowed to flow in one direction. This flow of electrons produces electricity. The electrons flow through wires to power the lights, appliances, and other electronics connected to the photovoltaic cells.
In summary, photovoltaic cells use solar energy to produce electricity by capturing the sun's rays and converting them into usable electrical energy. This electrical energy is then used to power lights, appliances, and other electronics.

for such more question on solar energy

https://brainly.com/question/31045772

#SPJ11

According to the wave equation, v = fλ, where v is the wave speed, f is the frequency, and λ is the wavelength. If we increase the wavelength and keep the wave speed the same, the frequency of the wave will decrease.

This is because, if we increase the wavelength but keep the wave speed constant, the wave will have to take longer to complete one full cycle, which means that the number of cycles completed per second (the frequency) will be lower.

Another way to think about this is to consider the relationship between wavelength and frequency in a wave. In general, waves with longer wavelengths have lower frequencies, and waves with shorter wavelengths have higher frequencies. This is because the wavelength represents the distance between two consecutive peaks or troughs in the wave, and the frequency represents the number of cycles completed per unit of time.

If the wavelength increases, the number of peaks or troughs per unit of time will decrease, and thus the frequency will decrease as well.

To know more about frequency , visit :

https://brainly.com/question/30611426

#SPJ1

Dealing with continuously variable data such as sound and light waves is called signal processing.

Signal processing is the manipulation of signals to extract useful information or transform them into a desired form. It is a broad field that encompasses many different applications, including audio and video processing, communication systems, radar systems, and control systems.

Signal processing techniques can be used to analyze and manipulate sound waves, such as filtering out unwanted noise, compressing or expanding dynamic range, or modifying the frequency spectrum of a signal. In the case of light waves, signal processing techniques can be used to remove noise, enhance contrast or color, or manipulate the spatial frequency content of an image.

There are many different tools and techniques that can be used in signal processing, depending on the specific application. Some common techniques include Fourier analysis, which decomposes a signal into its frequency components, and digital signal processing, which involves the use of digital algorithms to manipulate signals.

Overall, signal processing is a fundamental aspect of many modern technologies and is used in a wide range of applications, from audio and video processing to medical imaging and telecommunications.

learn more about signal processing here

https://brainly.com/question/11903284

#SPJ4

Options b and c are correct. These two are the reasons that indicate why one doesn't have to know how the wire is bent.

An electric field is a vector field created by a charged object. When a charged particle interacts with the electric field of another charged particle, it will experience a force, which can be either attractive or repulsive. The electric field at a given point in space is determined by the charge and distribution of charges in the space, as well as by the location and orientation of the observer. The strength of the electric field is measured in units of volts per meter (V/m).

Electric field (E) is not dependent on how the wire is bent, only the diameter of the wire is needed. And since conventional current flows in the direction of [tex]E\rightarrow[/tex], E is the same in every part of the wire with uniform properties. This implies that E must be parallel to the wire at every location even if the wire twists and turns. Therefore, even if the wire is bent, one need not know its shape, as long as the properties remain constant.

Thus, options b and c are the correct answers.

Learn more about electric current:

https://brainly.com/question/1100341

#SPJ11

When an electron is near the Earth's equator, it deflects if its velocity is in the following directions:

When an electron is near the Earth's equator and its velocity is in the direction of:

(a) Downward: The magnetic field lines are perpendicular to the Earth's surface at the equator, so the force on the electron is perpendicular to its velocity. The magnetic force on the electron is in the direction of eastward or westward.

(b) Northward: Magnetic force will act in the direction of eastward.

(c) Westward: Magnetic force will act in the direction of northward.

(d) Southeastward: In the southeastward direction, the magnetic force on the electron will be in the direction of northward.

To sum up, when an electron is near the Earth's equator, the direction of the magnetic force on it changes based on the direction of its velocity.

To learn more about Magnetic Force, refer here:

https://brainly.com/question/3160109#

#SPJ11

The substituent in Phenol is added to the ortho and para positions of the benzene ring. The substituent in Benzaldehyde is added to the ortho and para positions of the benzene ring.

The substituent in Bromobenzene is added to the ortho and para positions of the benzene ring. The substituent in Nitrobenzene is added to the meta position of the benzene ring. The substituent in Toluene is added to the ortho and para positions of the benzene ring.

Substituents on different aromatic compounds. The substituent is added to different positions for each of the aromatic compounds if they undergo electrophilic aromatic substitution. The positions where the substituents are added to Phenol, Benzaldehyde, Benzoic Acid, Bromobenzene, Nitrobenzene, and Toluene are described below:

Phenol- The substituent in Phenol is added to the ortho and para positions of the benzene ring.

Benzaldehyde- The substituent in Benzaldehyde is added to the ortho and para positions of the benzene ring.

Benzoic Acid- The substituent in Benzoic acid is added to the meta position of the benzene ring.

Bromobenzene- The substituent in Bromobenzene is added to the ortho and para positions of the benzene ring.

Nitrobenzene- The substituent in Nitrobenzene is added to the meta position of the benzene ring.

Toluene- The substituent in Toluene is added to the ortho and para positions of the benzene ring.

Thus, we can see that the positions of the substituent in each aromatic compound depend on the particular compound that undergoes electrophilic aromatic substitution.

Learn more about  "electrophilic aromatic substitution and Substituents" at : https://brainly.com/question/28286554

#SPJ11

Water slows down neutrons that are leaving nuclear processes quickly. As the water warms up, steam is produced. Electricity is generated by the turbine that the steam turns.

learn more about electricity here

https://brainly.com/question/776932

#SPJ1

The horizontal force is 44 kg m/s². The ratio of this force to the skater's weight is 0.69 kg m/s²/kg.

The track contains straight stretches and 16-metre-diameter semicircles for short-track speed skating. Suppose that a skater weighing 64 kg completes the turn at a constant speed of 11 m/s.

1) The horizontal force on the skater is determined by the centripetal force equation, F = mv²/r, where F is the force, m is the mass, v is the velocity, and r is the radius.

Using the given parameters, the horizontal force is therefore 64 kg x 11 m/s²/16 m = 44 kg m/s².

2) The ratio of this force to the skater's weight can be calculated by dividing the force (44 kg m/s²) by the weight (64 kg).

(44 kg m/s²) ÷64 kg = 0.69 kg m/s²/kg.

This gives a ratio of 0.69 kg m/s²/kg.

Learn more about force and speed at : https://brainly.com/question/8518482

#SPJ11

The final velocity of the plane after a missile of mass 1.20 102 kg is fired from the plane  is 0.255 m/s.

To find the final velocity of the plane when a missile of mass 1.20 x 10² kg is fired from a plane of mass 4.80 x 10³ kg initially moving at a speed of 3.25 x 10² m/s, and the speed of the missile relative to the plane is 1.06 x 10³ m/s, we can use the conservation of momentum.The initial momentum of the system is given by:

m1v1 + m2v2 = (m1 + m2)vf

where m1 = mass of missile, m2 = mass of the plane, v1 = velocity of the missile, v2 = velocity of the plane, and vf = final velocity of the system

Substituting the given values, we get:(1.20 x 10² kg) (1.06 x 10³ m/s) + (4.80 x 10³ kg) (3.25 x 10² m/s) = (1.20 x 10² kg + 4.80 x 10³ kg) vf

Simplifying, we get:1284 = (5.04 x 10³ kg) vf

Therefore, vf = 1284 / (5.04 x 10³ kg) = 0.255 m/s. So, the final velocity of the plane is 0.255 m/s.

More on velocity: https://brainly.com/question/20038545

#SPJ11

To calculate the magnetic field 2cm away from the straight current carrying wire made of Manganese, we can use the Biot-Savart Law.

The formula for the magnetic field due to a straight current carrying wire is given by:

B = (μ0 ₓ I) / (2π ₓr)

where B is the magnetic field, I is the current, r is the distance from the wire, and μ0 is the permeability of free space, which has a value of 4π x 10⁻⁷ T·m/A.

Given that the wire has a volume of 27cm³ and length 3cm, we can calculate its cross-sectional area as:

A = V / L = 27 cm³ / 3 cm = 9 cm²

Since the wire is switched on for 5 seconds, we can assume that the current is constant during this time interval.

Assuming a current of I = 1A, and a distance of r = 0.02m (2cm) from the wire, we can calculate the magnetic field as:

B = (4π x 10⁻⁷ T·m/A ₓ1A) / (2π ₓ 0.02m) = 10⁻⁵ T

Therefore, the magnetic field 2cm away from the current carrying wire made of Manganese is 10⁻⁵ T.

To know more about magnetic field , visit :

https://brainly.com/question/14848188

#SPJ1

We cannot calculate the magnetic field using the given information.

How to calculate magnetic field ?

To calculate the magnetic field due to a current-carrying wire at a distance, we can use the Biot-Savart law, which states that the magnetic field at a point due to a current-carrying wire is directly proportional to the current in the wire and the distance from the wire, and inversely proportional to the distance from the wire squared. The formula for the magnetic field due to a straight wire is:

B = (μ₀ / 4π) x (I / r)

where B is the magnetic field, I is the current in the wire, r is the distance from the wire, and μ₀ is the permeability of free space, which is a constant with a value of 4π x 10^-7 T m/A.

Given:

The wire is made of Manganese

The volume of the wire is 27 cm^3, and its length is 3 cm. Therefore, the cross-sectional area of thewire is (27/3) cm^2 = 9 cm^2.

The wire is switched on for 5 seconds.

The distance from the wire is 2 cm.

We need to know the current in the wire to calculate the magnetic field. Unfortunately, the problem statement does not provide any information about the current. Therefore, we cannot calculate the magnetic field using the given information.

To know more about magnet visit :-

https://brainly.com/question/14997726

#SPJ1

We can apply the formula [tex]v = \sqrt{(14.715 m/s^2 * r)}[/tex]   to determine the peregrine falcon's speed. A falcon can reach a centripetal acceleration that is 1.5 times the acceleration of free fall.

We can use the centripetal acceleration formula to find the speed of the peregrine falcon in this scenario:

[tex]a_c = v^2 / r[/tex]

where [tex]a_c[/tex]is the centripetal acceleration, v is the speed of the peregrine falcon, and r is the radius of the circular turn.

We are given that the centripetal acceleration of the peregrine falcon is 1.5 times the free-fall acceleration, which we can approximate as 9.81 m/s². Therefore, we have:

[tex]a_c = 1.5 * 9.81 m/s^2\\a_c = 14.715 m/s^2[/tex]

We can also assume that the radius of the circular turn is a characteristic of the maneuvering ability of the peregrine falcon, and is independent of its speed. Therefore, we can write:

[tex]a_c = v^2 / r[/tex]

Solving for v, we get:

[tex]v = \sqrt{(a_c * r)}[/tex]

Substituting the values we obtained earlier, we get:

[tex]v = \sqrt{(14.715 m/s^2 * r)}[/tex]

Therefore, the speed of the peregrine falcon in this tight circular turn depends on the radius of the turn. If we know the radius, we can use the equation [tex]v = \sqrt{(14.715 m/s^2 * r)}[/tex] to calculate the speed of the peregrine falcon.

Learn more about acceleration here:

https://brainly.com/question/20382454

#SPJ4

The diameter, in inches, of the copper alloy cylinder under the load of 932 psi is 44.17 inches.

To calculate the diameter of the copper alloy cylinder under a load of 932 psi, we will use the following formula:

Δd = (d * σ) / (E * (1 - v²)

Where,

Δd = change in diameter = d′ − dd = original diameter

σ = tensile stress = 932 psi

E = elastic modulus = 1,117,281

psiv = Poisson's ratio = 0.34

Substitute the given values in the above formula to obtain the change in diameter:

Δd = (44.24 * 932)/(1,117,281 * (1 - 0.34²)

Δd = 0.0683 inches

The diameter of the copper alloy cylinder under the load of 932 psi is:

d′ = d + Δd

d′ = 44.24 + 0.0683

d′ = 44.17 inches

Therefore, the diameter in inches is 44.17 inches.

Leran more about diameter of cylinder at https://brainly.com/question/19052774

#SPJ11

The solution has the lowest capacity to conduct electricity when the conductivity is at its lowest point. This can happen if the solution has an equal amount of Ba(OH)2 and H2SO4 or if there is not enough of one of these substances to ionise and convey the current.

Because there are not enough ions in the solution to convey the electric current, the solution does not conduct at this low value. The ability of a solution to transmit an electric current is measured by its conductivity, which is inversely proportional to the concentration of ions in the solution. There are fewer charge carriers available to convey the ions when there are fewer ions in the solution. The conductivity of a solution decreases as the number of ions decreases because fewer charge carriers are available to transmit the current. Because the concentration of ions in the solution is larger at these places, the solution conducts more before and after the minimum point. The concentration of Ba(OH)2 may be larger than that of H2SO4 prior to the lowest point, leading to a higher ion concentration and subsequently a higher conductivity. The concentration of H2SO4 may be larger than that of Ba(OH)2 after the lowest point, leading to a higher ion concentration and conductivity.

learn more about solution  here:

https://brainly.com/question/30665317

#SPJ4

The average force exerted on the car during this time is 4850 N.

We can use the equation F = ma to find the average force exerted on a 970 kg car that starts from rest on a horizontal roadway and accelerates eastward for 5.00 seconds when it reaches a velocity of 25.0 m/s. Here is the solution to the problem:

Given,

Mass of the car, m = 970 kg

Initial velocity of the car, u = 0

Final velocity of the car, v = 25.0 m/s

Time is taken by the car to attain the final velocity, t = 5.00 s

Acceleration of the car, a = (v - u) / t = (25.0 - 0) / 5.00 = 5.00 m/s²

Average force exerted on the car during this time, F = m × a= 970 kg * 5.00 m/s²= 4850 N

You can learn more about average force at: brainly.com/question/29781083

#SPJ11

One of the actions that can be taken to help Joshua trees to survive climate change is protecting them from the direct impact of human activities.

Joshua trees are a part of the Agavaceae family and are also known by the name of Yucca brevifolia. It is a type of tree-like yucca that grows in arid regions such as the Mojave Desert. These trees are known for their unique, spiky green leaves and their rough trunk that has sharp leaves which grow upward. Joshua trees have a lifespan of about 500 to 1000 years and can grow up to 40 feet tall.

Joshua trees are being threatened due to climate change. Climate change is affecting their natural habitat and therefore, they cannot germinate and grow as easily as they used to do before. As a result, the number of Joshua trees is on the decline. To ensure the survival of these trees, we need to act immediately.

One of the most effective ways to help the Joshua trees survive climate change is to protect them from the direct impact of human activities. There are various ways to do this such as reducing carbon emissions, minimizing deforestation, promoting reforestation, and more. If we want these trees to survive, we need to act now to prevent further damage to their habitat. By protecting these trees from the negative effects of climate change, we can ensure their survival and preserve their beauty for generations to come.

To know more about Joshua trees: https://brainly.com/question/12682491

#SPJ11

Explanation:

Planets closer to the sun will appear to transit from time to time

   = 2      Venus and Mercury     ( I suppose you could include the Moon..an eclipse ....haha)

All of the planets further from the sun than earth will not transit

Potentially ALL of the planets could transit the sun (earth included)  if observed outside solar system   HOWEVER if you are not observing from near the orbital plane of

the planets NONE of them would transit

For maximum transits, the planets should all be in the same orbital plane and the observer should be very close to this plane also.

1) The frequency fi of the ith normal mode is given by the equation fi = v/2λi, where λi is the wavelength of the ith mode.

2) The three lowest normal mode frequencies f1, f2, and f3 can be expressed in terms of L, v, and constants as follows: f1=v/2L, f2=v√2/2L, and f3=v2/2L.

3) The frequencies can be listed in increasing order as f1=v/2L, f2=v√2/2L, f3=v2/2L.

A dynamical system's normal mode of motion is a pattern of motion in which every component oscillates sinusoidally at the same frequency and with the same fixed phase relationship. The normal modes' description of free motion occurs at set frequencies. These constant frequencies of a system's normal modes are referred to as its natural or resonant frequencies.

Learn more about mode, frequency at : https://brainly.com/question/11722229

#SPJ11