A car moves from rest.
The graph gives information about the speed, v metres per second, of the car t seconds after it starts to move.
Work out an estimate for the distance the car travels in the first 40 seconds of its journey. Use 4 strips of equal width.

A Car Moves From Rest.The Graph Gives Information About The Speed, V Metres Per Second, Of The Car T

Answers

Answer 1

Add up the areas of all four strips to get an estimate for the distance traveled by the car in the first 40 seconds: Distance traveled = Area of strip 1 + Area of strip 2 + Area of strip 3 + Area of strip 4.

What is area?

In geometry, area is the measure of the size or extent of a two-dimensional surface or region. It is typically measured in square units, such as square meters or square feet. The area of a shape can be calculated by multiplying its length by its width or by using specific formulas for different shapes, such as the area of a rectangle, circle, or triangle. Area is an important concept in many fields, including mathematics, physics, engineering, and architecture.

by the question.

Assuming the graph shows the speed of the car in meters per second (m/s) on the y-axis and time in seconds on the x-axis, we can estimate the distance traveled by the car in the first 40 seconds by dividing the area under the graph for that time period into four equal strips and calculating the area of each strip using the trapezium rule.

To do this, we need to find the speed of the car at four different times during the first 40 seconds, which we can do by reading off the graph. Let's say we choose the times t = 0, 10, 20, and 30 seconds.

Then we can estimate the distance traveled by the car in the first 40 seconds as follows:

Calculate the area of the first strip (from t = 0 to t = 10 seconds) using the trapezium rule:

Area of strip 1 = (1/2) x (speed at t = 0 seconds + speed at t = 10 seconds) x 10 seconds

Repeat for the other three strips, using the appropriate speeds and time intervals:

Area of strip 2 = (1/2) x (speed at t = 10 seconds + speed at t = 20 seconds) x 10 seconds

Area of strip 3 = (1/2) x (speed at t = 20 seconds + speed at t = 30 seconds) x 10 seconds

Area of strip 4 = (1/2) x (speed at t = 30 seconds + speed at t = 40 seconds) x 10 seconds

To learn more about speed:

https://brainly.com/question/28224010

#SPJ1

A Car Moves From Rest.The Graph Gives Information About The Speed, V Metres Per Second, Of The Car T

Related Questions

How do I solve this?

Answers

Answer:

X+4

Step-by-step explanation:

Area = l *b

x^2 + 13x + 36 = (X+9) * b

x^2 + 9x + 4x + 36 = (X+9) * b

X(X+9) + 4(X+9) = (X+9) * b

(X+4) (X+9) = (X+9) * b

b = (X+4)

Find the value of N.

4 + 5 -3 = N
8 x 3 - 5 = N
15 ÷ 3 + 10 = N
8 + 3 -1 x 2 = N
14 x 3 - 2 = N
( 3 + 5 ) x 2 = N
10 + 7 + 2 x 1 = N
16 ÷ 8 + 4 = N
7 + 5 ÷ 5 = N
20 ÷ 4 x 6 = N

Answers

Answer:

1. n=6

2. n=19

3. n=15

4. n=20

5. n=40

6. n=16

7. n=19

8. n=6

9. n=2.4

10. n=30

Step-by-step explanation:

remember the priorities :

1. brackets

2. exponents

3. multiplications and divisions

4. additions and subtractions

inside every category you go usually from left to right, but you can use the commutative property where applicable.

4 + 5 - 3 = 4 + 5 - 3 = 4 + 5 - 3 = 4 - 3 + 5 = 6

8×3 - 5 = 24 - 5 = 19

15/3 + 10 = 5 + 10 = 15

8 + 3 - 1×2 = 8 + 3 - 2 = 9

14×3 - 2 = 42 - 2 = 40

(3 + 5)×2 = 8×2 = 16

10 + 7 + 2×1 = 10 + 7 + 2 = 19

16/8 + 4 = 2 + 4 = 6

7 + 5/5 = 7 + 1 = 8

20/4×6 = 5×6 = 30

I NEED HELP ON THIS ASAP!!

Answers

Answer:

  (a) {0 ≤ x ≤ 60; 0 ≤ y ≤ 90; x + y ≤ 120}

  (b) p = 50x +75y; 30 tons of loam and 90 tons of peat will maximize profit

Step-by-step explanation:

You want a graph of constraints and the solution to the problem of maximizing profit from sale of 60 tons of loam and 90 tons of peat at a profit of $50/t and $75/t, respectively, if at most 120 tons can be sold.

(a) Constraints

Let x and y represent tons of loam and peat, respectively. Then the constraints can be written as the inequalities ...

0 ≤ x ≤ 60 . . . . . can only sell as much as is available0 ≤ y ≤ 90 . . . . . can only sell as much as is availablex + y ≤ 120 . . . . . can sell a maximum of 120 tons

(b) Objective function

We want to maximize profit, so maximize ...

  p = 50x +75y

Graph

The attached graph shows the graphs of the inequalities. The restrictions on the variables confine the applicable graph to the first quadrant.

The black line shows the objective function. The value of the profit function is maximized when the line is as far from the origin as possible. The boundary point of the constraint solution space that maximizes profit is (x, y) = (30, 90).

Sale of 30 tons of loam and 90 tons of peat soil will maximize profit.

__

Additional comment

Since selling peat is the most profitable, profit will be maximized when we sell as much peat as possible. Sale of only 90 tons is possible, so profit will be maximized when we sell that many, then make up the rest of the 120 ton maximum by selling loam. We don't need a graph or a list of constraints to figure that out.

A middle school teacher estimates that 170 parents will attend the back to school informational meeting. A total of 147 parents actually attended the meeting. What is the percent error of the teacher's estimate rounded to the nearest tenth of a percent

Answers

The percent error from the real and estimated values is 16%.

What is percent error?

The difference between a precise value and an approximation to it is the approximation error in a data value. Either an absolute mistake or a relative error can be used to describe this error. It is possible for measurement mistake or computing machine precision to produce an approximation error. The percent error is the distinction between the estimated value and the real value in relation to the actual value. In other terms, the relative error is multiplied by 100 to calculate the percent error.

The estimated value= 170

the real value= 147

Percent error ={ (170-147)/147}*100= 0.1564*100

Percent error = 15.64% ≈ 16%

To know more about percent error, visit

https://brainly.com/question/29107960

#SPJ1

Anna has n number of nickels. She has less than 45 cents. Which inequality could
be used to find the value of n?
A $0.05n< $0.45
B $0.05n > $0.45
C $0.05n ≤ $0.45
D $0.05n ≥ 0.45

Answers

Answer:

A $0.05n< $0.45

Step-by-step explanation:

It is given that she has "less than" rather than "less than or equal to" 45 cents. Therefore, your answer will contain the "less than" sign, which is signified as <.

Therefore, being the only answer with <, your answer will be A.

A nickel is $0.05, therefore:

$0.05 of n is less than $0.45, or $0.05n< $0.45

A) $0.05n < $0.45 is your answer.

~

Learn more about inequalities, here:

https://brainly.com/question/4410289

Part III: Short Answer Items (Worth 3 points) Instruction: Write the most simplified answer on the blank space provided for each of them. 11. If the price of an item is Birr 9,500 before VAT, then the total cost of the item including VAT​

Answers

According to the VAT rate, the total cost of the item including VAT is Birr 10,925 assuming a VAT rate of 15%.

What is VAT rate ?

VAT (Value Added Tax) rate is a percentage that is added to the price of goods or services. VAT is usually charged on top of the base price of a product or service, and the total price is calculated as (base price) + (base price x VAT rate). The VAT rate is typically set by the government and may be subject to change over time.

To find the total cost of the item including VAT, we need to know the VAT rate.

Let's assume the VAT rate is 15%. To calculate the VAT amount, we can multiply the price before VAT by the VAT rate:

VAT amount = 0.15 x 9,500 = Birr 1,425

The total cost of the item including VAT is the sum of the price before VAT and the VAT amount:

Total cost = 9,500 + 1,425 = Birr 10,925

Therefore, the total cost of the item including VAT is Birr 10,925 assuming a VAT rate of 15%.

To know more about VAT rate visit:

brainly.com/question/28165138

#SPJ1

A box with a square base and open top must have a volume of 62500 cm3. We wish to find the dimensions of the box that minimize the amount of material used. First, find a formula for the surface area of the box in terms of only x, the length of one side of the square base. [Hint: use the volume formula to express the height of the box in terms of x.] Simplify your formula as much as possible. A(x) = Next, find the derivative, A'(x). A'(x) = Now, calculate when the derivative equals zero, that is, when A'(x) = 0. [Hint: multiply both sides by x² .] A'(x) = 0 when x =

Answers

The area of the square base = x².

we have:l = w = x ... (2) ... And, h = V/lw = V/x² ... (3) ...

The dimension of the box that minimizes the amount of material used is x =  (2V)1/3. A(x) = x² + 4V/x, A'(x) = 2x - 4V/x², x =  (2V)1/3

The given volume of the box is 62500 cm³. We wish to find the dimensions of the box that minimize the amount of material used.

To obtain the formula for the surface area of the box in terms of only x, the length of one side of the square base, we use the formula for the volume of a box:V = lwh ... (1) ... where V is the volume, l is the length, w is the width, and h is the height of the box. Here, the base of the box is a square with side length x.

Hence, the area of the square base = x². Therefore, we have:l = w = x ... (2) ... And, h = V/lw = V/x² ... (3) ... We can substitute (2) and (3) in (1) to get the formula for V in terms of x as follows:V = x² V/x² A(x) = A(x) = x² + 4xhA(x) = x² + 4x(V/x²) = x² + 4V/x

Now, to find the derivative A'(x) of A(x), we differentiate A(x) with respect to x:A'(x) = 2x - 4V/x²  A'(x) = 0 when x =  (2V)1/3. Therefore, the dimension of the box that minimizes the amount of material used is x =  (2V)1/3. A(x) = x² + 4V/x, A'(x) = 2x - 4V/x², x =  (2V)1/3

Learn more about Area

brainly.com/question/1561162

#SPJ11

Suppose V = {S, A, a, b}, T = {a, b), S is the start symbol with productions S ® bS, S ® aA, A ® aS, A ® bA, A ® a, S ® b. Find a derivation of each of the following. A) bbabbab

(3 Marks)

b) bbbaab

Answers

This question is related to formal languages and automata theory, specifically to the topic of context-free grammar and derivations.

a) bbabbab:

S -> bS (Apply S -> bS)

-> bbS (Apply S -> bS)

-> bbbA (Apply S -> aA)

-> bbbaS (Apply A -> aS)

-> bbbaaS (Apply S -> aA)

-> bbbaaa (Apply A -> a)

Therefore, the derivation of bbabbab is S -> bS -> bbS -> bbbA -> bbbaS -> bbbaaS -> bbbaaa -> bbabbab.

b) bbbaab:

S -> bS (Apply S -> bS)

-> bbS (Apply S -> bS)

-> bbbA (Apply S -> aA)

-> bbbaS (Apply A -> aS)

-> bbbaaS (Apply S -> aA)

-> bbbaaa (Apply A -> a)

-> bbbaab (Apply A -> b)

Therefore, the derivation of bbbaab is S -> bS -> bbS -> bbbA -> bbbaS -> bbbaaS -> bbbaaa -> bbbaab.

Learn more about automata theory at

brainly.com/question/31044784

#SPJ4

Suppose Alice uses the RSA methods as follows. She starts with a mes- sage consisting of several letters, and assigns a = 1,b=2, -2=26. She then encrypts each letters separately. For example, if her message is cat, she calculates 3 = mod n 19 = 2 mod n and 209 = mod n. Then she sends the encrypted message {G}=1,2,3 to Bob. Explain how Eva can find the message without factoring n. In particular, suppose n=8881 and e=13. Eva intercepts the message q=4461; = 794; e = 2015,C4 = 2015,3 = 3603 Find the message without factoring 8881.

Answers

The solution is {y} = (2311, 2557, 2015) and hence the original message is CAT.

Suppose Alice uses the RSA methods as follows. She starts with a message consisting of several letters, and assigns a = 1,b=2, -2=26. She then encrypts each letter separately. For example, if her message is cat, she calculates 3 = mod n 19 = 2 mod n and 209 = mod n. Then she sends the encrypted message {G}=1,2,3 to Bob.The solution to the given question is as follows:Eva knows that n = 8881 = 79 × 112, where p = 79 and q = 112 are primes.Using the extended Euclidean algorithm and the fact that 13*5081 = 1 (mod 8880), one can compute the inverse of e modulo 8880 as d ≡ 5081 ≡ -3805 (mod 8880).To compute the message, Alice encrypts each letter of the message separately using the encryption function y ≡ x13 (mod 8881).Eva receives {G}=1,2,3 from Alice, and hence she wants to decipher it by computing 13 ≡ y ≡ G13 (mod 8881), where y is the message.To compute y, we have 1^{13} ≡ 1 (mod 8881), 2^{13} ≡ 8192 ≡ - 6889 + 2 (mod 8881) since 8192 = 2 × 4096 and 4096 = 8881 - 4785, hence, 2^{13} ≡ - 4785 × 2 + 2 (mod 8881), i.e., 2^{13} ≡ 2311 (mod 8881), and 3^{13} ≡ 3 × 3^{12} ≡ 3 × (3^{4})^{3} ≡ 3 × 6561^{3} ≡ 3 × 4299 ≡ 12897 ≡ 2557 (mod 8881).Therefore, the decrypted message is {y} = (2311, 2557, 2015) and hence the original message is CAT.Hence, the solution is {y} = (2311, 2557, 2015) and hence the original message is CAT.

Learn more about Original

brainly.com/question/28490920

#SPJ11

A shipping company is packing a box with one cubic centimeters blocks. The box is 14 centimeters long. 12 centimeters wide and 16 centimeters high. How many one cubic centimeter blocks will fill the box ?

Answers

The shipping company will need 2,688 one cubic centimeter blocks to fill the box.

The volume of the box can be calculated as:

Volume = length x width x height

Volume = 14 cm x 12 cm x 16 cm

Volume = 2,688 cubic cm

Since each block is also one cubic cm in volume, we can simply divide the total volume of the box by the volume of one block to find the number of blocks needed to fill the box:

Number of blocks = Volume of box / Volume of one block

Number of blocks = 2,688 cubic cm / 1 cubic cm

Number of blocks = 2,688

Learn more about volume here

brainly.com/question/23952628

#SPJ4

After 6 new students entered the Happy Hearts Childcare Center and 2 students exited, there were 3 times as many students as before. How many students were present before students entered and exited the center?​

Answers

Answer: 2

Step-by-step explanation:

If there are three times as many students when there are 6 students you do 6 divided by three to give you two.

Reduce each expression to a polynomial

((y-b)^(2))/(y-b+1)+(y-b)/(y-b+1)

Answers

The given expression ((y-b)²/(y-b+1)+(y-b)/(y-b+1) after being reduced to a polynomial, can be represented as y-b.

In order to reduce the given equation to a polynomial, we are required to simplify and combine like terms. First, we can simplify the expression in the numerator by expanding the square:

((y-b)²/(y-b+1) = (y-b)(y-b)/(y-b+1) = (y-b)²/(y-b+1)

Now, we can combine the two terms in the equation by finding a common denominator:

(y-b)²/(y-b+1) + (y-b)/(y-b+1) = [(y-b)² + (y-b)]/(y-b+1)

Next, we can combine the terms in the numerator by factoring out (y-b):

[(y-b)² + (y-b)]/(y-b+1) = (y-b)(y-b+1)/(y-b+1)

Finally, we can cancel out the common factor of (y-b+1) in the numerator and denominator to get the polynomial:

(y-b)(y-b+1)/(y-b+1) = y-b

Therefore, the equation ((y-b)²)/(y-b+1)+(y-b)/(y-b+1)  after being simplified, is equivalent to the polynomial y-b.

Learn more about polynomials :

https://brainly.com/question/30127172

#SPJ4

What is the difference between the simple and compound interest if you borrow $3,000 at a 6% interest rate for 2 years?
$180.00
$10.00
$6.00
$80.00

Answers

Answer:

Correct option is C)

Simple interest =

100

3000×6×2

=360

Compound interest =3000(1+

100

6

)

2

−3000=18×20.6=370.8

∴ Difference is Rs.10.8.

you can convert this value to $$

or simply the answer will be 2. $10

(hob-evzw-zjw) come

Answer:

B is your answer.
10.80$ which you just round to 10. 10 is your answer.

Step-by-step explanation:

For simple interest, the formula is:

Simple Interest = Principal × Rate × Time

For compound interest, the formula is:

Compound Interest = Principal × (1 + Rate)^Time - Principal

Let's calculate the values:

Principal = $3,000

Rate = 6% or 0.06

Time = 2 years

Simple Interest = $3,000 × 0.06 × 2 = $360

To calculate compound interest, we need to use the formula:

Compound Interest = $3,000 × (1 + 0.06)^2 - $3,000

= $3,000 × (1.06)^2 - $3,000

= $3,000 × 1.1236 - $3,000

= $3,370.80 - $3,000

= $370.80

The difference between simple and compound interest is:

$370.80 - $360 = $10.80

3.
Point out the five-fold health hazards prevalent in Nepal.
4.
Why is life expectancy of the Nepalese very low? Give reasons.
the Minister of Health in Nenal. What programme​

Answers

The five fold health hazards prevalent in Nepal are respiratory diseases due to high altitude, Germ cell mutagenicity, Carcinogenicity, Reproductive toxicity and sanitation related issues which causes diarrhea, cholera like diseases.

Nepal is a small country in hilly region of Himalayas between China and India. It has not developed much in terms of health care facilities and advanced treatment methods due to which people migrate to India for treatments in several extreme diseases. The low life expectancy is because of poor employment which causes financial insecurity and hence people are either malnourished, or die of lack of proper treatment.

The Nepal Health Sector Program – Implementation Plan (NHSP-IP) has been developed in order to meet the Health Sector Strategy which has its agenda to improvise the needs of the people in near future.

Learn more about life expectancy at:

https://brainly.com/question/17427164

#SPJ4

48 identical looking bags of lettuce were delivered to Circle J grocers. Unfortunately, 12 of these bags of lettuce are contaminated with listeria. Joe, from Joes Cafe randomly selects 4 bags of the lettuce for his cafe. Let X equal the number of the selected packets which are contaminated with listeria. a. How many possible ways are there to select the 4 out of 48 packets (order does not matter) without replacement? b. What is the probability thatX=0
c. What is the probability thatX=4? d. What is the probability thatx>2? e. What is the expected value ofX? f. What is the standard deviation ofX? g. What is the probability that X is smaller than its expected value?
h. What is the probability thatX=5?

Answers

Probability that X = 5:Since, Joe selects only 4 bags of lettuce. X can't be 5.P(X=5) = 0Hence, the probability that X = 0 is 0.3164 and the probability that X = 5 is 0.

The given problem can be solved using the concept of binomial distribution.

In the given question, there are 48 bags of lettuce out of which 12 bags are contaminated with listeria.

Joe selects 4 bags of lettuce. X is the random variable which represents the number of contaminated bags of lettuce selected by Joe. X can take values from 0 to 4. (as Joe selects only 4 bags).

Part A)Number of ways to select 4 bags of lettuce out of 48:This can be solved using the concept of combinations. The formula to calculate the number of combinations is[tex]:nCr = n! / r!(n-r)![/tex]Here, n = 48 and r = 4.

Number of ways = 48C4 = 194,580

Part B)Probability that X = 0:This can be calculated using the formula for the binomial distribution :

[tex]P(X = r) = nCr * p^r * q^(n-r)[/tex]

Here, p = probability of selecting contaminated bag = 12/48 = 0.25q = probability of selecting non-contaminated bag = 1-0.25 = 0.75Also, n = 4 and r = [tex]0P(X=0) = 4C0 * 0.25^0 * 0.75^4= 0.3164[/tex]

for such more questions on probability

https://brainly.com/question/13604758

#SPJ11

The daily temperatures for the winter months in Virginia are Normally distributed with a mean of 59 F and a

standard deviation of 10°F. A random sample of 10 temperatures is taken from the winter months and the mean

temperature is recorded. What is the standard deviation of the sampling distribution of the sample mean for all

possible random samples of size 10 from this population?

Answers

The  standard deviation of the sampling distribution of the sample mean for the given sample size is equal  to 3.1623°F.

For the normally distributed data,

Mean of the population distribution 'μ' = 59F

Population standard deviation 'σ' = 10°F

Sample size 'n' = 10

Formula for the standard deviation of the sampling distribution of the sample mean (also known as the standard error of the mean) is equal to ,

= σ / √(n)

Substitute the value to get the standard deviation of the sampling distribution of the sample mean we get,

= 10°F / √(10)

= 3.1623°F

Therefore, the standard deviation of the sampling distribution of the sample mean for all possible random samples of size 10 from this population is approximately 3.1623°F.

Learn more about standard deviation here

brainly.com/question/30985253

#SPJ4

Should we write reciprocal for 5/6 in this question 5 × 5/6

Answers

If the question is simply asking for the product of 5 and 5/6, then writing the reciprocal is not necessary. To multiply fractions, we can simply multiply the numerators and the denominators separately. In this case, we would get:

5 x 5/6 = (5 x 5)/(1 x 6) = 25/6

However, if the question specifically asks for the result to be expressed as a mixed number or a whole number, then we would need to simplify the fraction by converting it to a mixed number or a whole number. In some cases, it may be helpful to write the reciprocal in order to simplify the fraction more easily.

For example, if the question asks us to express 5 x 5/6 as a mixed number or a whole number, we could first write the reciprocal of 5/6 as 6/5, and then multiply it with 5 to get:

5 x 5/6 = 5 x 6/5 = 30/5

We can simplify this fraction by dividing both the numerator and the denominator by 5:

30/5 = 6

Therefore, if the context or the desired result requires the expression 5 x 5/6 to be simplified further, it may be helpful to write the reciprocal of 5/6 to make the simplification process easier. However, in general, it is not necessary to write the reciprocal to multiply fractions.

Find more about reciprocal

brainly.com/question/15212898

#SPJ4

question if all other factors are held constant, which of the following results in an increase in the probability of a type ii error? responses the true parameter is farther from the value of the null hypothesis. the true parameter is farther from the value of the null hypothesis. the sample size is increased. the sample size is increased. the significance level is decreased. the significance level is decreased. the standard error is decreased. the standard error is decreased. the probability of a type ii error cannot be increased, only decreased.

Answers

If all other factors are held constant, decreasing the significance level results in an increase in the probability of a type II error. This is true. we can say that the probability of making a type II error increases when the significance level is lowered.

What is a type II error? In hypothesis testing, a type II error occurs when a false null hypothesis is not rejected. When there is a real effect and the null hypothesis is false, this happens. It's a mistake that occurs when a researcher fails to reject a false null hypothesis.

A false negative is another term for a type II error. The power of the test, the size of the sample, the confidence level, and the effect size are all factors that influence the probability of making a type II error. Only if we decrease the significance level can the probability of a type II error be increased.

What is the significance level? The significance level is also known as alpha. It is the probability of rejecting a null hypothesis when it is true. It is represented by α. It is usually set at 0.05 or 0.01 in most studies. When the significance level is lowered, the probability of making a type I error decreases, but the probability of making a type II error increases. Therefore, we can say that the probability of making a type II error increases when the significance level is lowered.

For more such questions on type II error

https://brainly.com/question/30403884

#SPJ11

2. Two players A and B are competing at a trivia quiz game involving a series of questions. On any individual question, the probabilities that A and B give the correct answer areαandβrespectively, for all questions, with outcomes for different questions being independent. The game finishes when a player wins by answering a question correctly. Compute the probability that A wins if

a) A answers the first question,

b) B answers the first question. ​

Answers

a) The probability that A wins if A answers the first question is α / (α + β).

b) The probability that A wins if B answers the first question is βα+β.

a) If A answers the first question, then the game will be over only if A answers the first question correctly, which has a probability of α. If A answers incorrectly, then B gets to answer the next question, and we are in the same situation but with A's and B's roles reversed. Therefore, the probability that A wins in this case is given by:

P(A wins | A answers first) = α + (1 - α)β P(A wins | B answers first)

b) If B answers the first question, then we are in the same situation as in part a) but with A's and B's roles reversed. Therefore, the probability that A wins in this case is given by:

P(A wins | B answers first) = β P(A wins | A answers first) + (1 - β)β P(A wins | B answers first)

We can solve these equations for P(A wins | A answers first) and P(A wins | B answers first) using algebraic manipulation. For example, we can rearrange the equation in part a) to get:

P(A wins | A answers first) = α / (1 - (1 - α)β)

Similarly, we can rearrange the equation in part b) to get:

P(A wins | B answers first) = β / (1 - (1 - β)α)

Note that these probabilities depend on the values of α and β, which represent the abilities of A and B to answer questions correctly.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

X
The diagram shows part of a
regular decagon. Work out
the size of the angle marked
X

Answers

Answer:

144°

Step-by-step explanation:

x = (10 - 2)(180)/10 = 144

Which of the following is equivalent to 3/8? -0.6, square root of 100, 2/5, -2/3, 0.35217534

Answers

The οptiοn in the questiοn that is equivalent tο 3/8 is 2/5.

Equivalent- Meaning in Mathematics

The term "equivalent" in math refers tο twο meanings, numbers, οr quantities that are the same. The equivalence οf twο such quantities shall be denοted by a bar οver an equivalent symbοl οr Equivalent Sign. It alsο means a lοgical equivalence between twο values οr a set οf quantities. Equivalence is similar but mοre universal than equality. If twο sets οf equatiοns have the same sοlutiοns, we might cοnsider them similar, but they are nοt identical.

Hοw tο calculate the equivalent οf 3/8?  

We can simplify 3/8 and 2/5 sο that they have a cοmmοn denοminatοr:

3/8 = 3*(5/5)/(85/5) = 15/40

2/5 = 2(8/8)/(5*8/8) = 16/40

Since 15/40 and 16/40 have the same denοminatοr, we can cοmpare their numeratοrs tο see which is larger:

15/40 < 16/40

Since 16/40 is larger, we can cοnclude that 2/5 is greater than 3/8.

Therefοre, the οptiοn that is equivalent tο 3/8 is 2/5.

Learn more about equivalent at

https://brainly.com/question/14672772

#SPJ1

An online bookstore is having a one-day sale. Softcover books are $4, hardcover books are $7, magazines are $3, and all digital downloads of books are $2. Let's say 150 customers purchased books in one form or another that day. Below are the frequencies in which customers purchased books:
Books: Purchases:
Softcover 42
Hardcover 28
Magazine 23
Digital Download 57
Based on the data above, which is the correct relative frequency with discrete random variable X = "the amount of money for a book?"

Answers

The correct relative frequency for X is:

X: $2 $3 $4 $7

P(X): 0.38 0.15 0.28 0.19

How to find the relative frequency for the discrete random variable X ?

First we need to determine the probability of each value of X occurring based on the given data.

We can use the following formula to calculate the probability of a particular value of X:

P(X = x) = f(x)/n

Where

f(x) is the frequency of the value x n is the total number of purchases (150)

Let's calculate the probabilities for each value of X:

P(X = $2) = 57/150 = 0.38

P(X = $3) = 23/150 = 0.15

P(X = $4) = 42/150 = 0.28

P(X = $7) = 28/150 = 0.19

Therefore, the correct relative frequency for X is:

X: $2 $3 $4 $7

P(X): 0.38 0.15 0.28 0.19

Learn more about probability here : brainly.com/question/251701

#SPJ1

what are the X intercept of the graph of the following equation y=x^2 - 64

Answers

Step-by-step explanation:

Here is one way :

  at the x-axis intercepts , the value of 'y' = 0  (obviously)

   0  = x^2 -64

    x^2 = 64

     x = ± 8

   

$80 selling price 8% rate of sales tax. find the sales tax and the total cost

Answers

Answer:

sales tax 6.40

total cost 86.40

Step-by-step explanation:

First we need to find the sales tax.

80 * 8%

80 *.08 = 6.40

Add this to the original price.

80+6.40

86.40

The total cost is 86.40

last week Alexander was paid $56 for 7 hours of work. how much money does Alexander's job pay her hour??

Answers

Answer:

$56 divided by 7 hours is $8 per hour sh get payed.

a normal distribution of exam scores has a standard deviation of 8. a score that is 12 points above the mean would have a z-score of: a score that is 20 points below the mean would have a z-score of:

Answers

The standard deviation of a normal distribution of exam scores is 8. A score that is 12 points above the mean would have a z-score of 1.5, and a score that is 20 points below the mean would have a z-score of -2.5.

What is the z-score?

The z-score can be calculated by dividing the difference between a data value and the mean of the data set by the standard deviation of the data set.

The z-score of a score that is 12 points above the mean in a normal distribution of exam scores with a standard deviation of 8.

z = (x−μ)/σ = (x−μ)/σ = (12−0)/8 = 1.5

The z-score of a score that is 12 points above the mean in a normal distribution of exam scores with a standard deviation of 8 is 1.5.

The z-score of a score that is 20 points below the mean in a normal distribution of exam scores with a standard deviation of 8.

z = {x-μ}/{σ}  = {-20-0}/{8}  = −2.5

The z-score of a score that is 20 points below the mean in a normal distribution of exam scores with a standard deviation of 8 is -2.5.

Learn more about Z-score here:

https://brainly.com/question/15016913

#SPJ11

WILL GIVE BRAINLIEST HELP

Answers

Answer:

D= 7(2g-H)/U

Step-by-step explanation:

The sum of the base and the height of a triangle is 22 cm. Find the dimensions for which the area is a maximum. The triangle with maximum area has a height of_____cm and a base of cm_____.

Answers

The dimensions of the triangle with maximum area are a base of 11 cm and a height of 11 cm.

We are given that the sum of the base and height of a triangle is 22 cm. Let's call the base of the triangle "b" and the height "h". Then we have the equation:

b + h = 22

We want to find the dimensions of the triangle that will give us the maximum area.

The formula for the area of a triangle is A = (1/2)bh.

We can use the equation b + h = 22 to solve for one of the variables in terms of the other.

we can solve for h:

h = 22 - b

Substituting this into the formula for the area, we get:

A = (1/2)b(22 - b)

The equation 0 = 11b - (1/2)b² can be rearranged to:

(1/2)b² - 11b = 0

We can then use the quadratic formula to solve for "b"

b = 11 ± 11

So the value of b that gives us the maximum area is b = 11 cm. Substituting this back into the equation h = 22 - b, we get:

h = 22 - 11 = 11 cm

Triangle has a base of 11 cm and a height of 11 cm.

To practice more questions about area of triangle:

https://brainly.com/question/21735282

#SPJ11

A professor grades students on a normal curve. For any grade x, based on the a course mean and standard deviation developed over years of testing, the following applies: D:--1.60 < x < -0.4σ How many A, B, C and D grades are given per 100 students?

Answers

The proportion of students with a z-score between -1.20 and -0.30 is about 0.304. So for every 100 students.

What is the z-score?

Z-score indicates how much a given value differs from the standard deviation. The Z-score, or standard score, is the number of standard deviations a given data point lies above or below the mean. Standard deviation is essentially a reflection of the amount of variability within a given data set.

Assuming that the grading follows a standard normal distribution (i.e., with a mean of 0 and a standard deviation of 1), we can use the z-score formula to find the proportions of students that fall within each grade range:

For an A grade: z-score > 1.65

For a B grade: 0.67 < z-score ≤ 1.65

For a C grade: -0.40 < z-score ≤ 0.67

For a D grade: -1.60 < z-score ≤ -0.40

To convert from the standard normal distribution to the distribution with the course mean and standard deviation, we can use the formula:

z-score = (x - mean) / standard deviation

We don't know the actual mean and standard deviation for the course, so we'll use the given range for the D grade (-1.60 < x < -0.4σ) to estimate the standard deviation. Since the D grade range is 1.2 standard deviations wide (from -1.60 to -0.4σ), we can solve for the standard deviation:

1.2σ = -1.60

σ = -1.60 / 1.2

σ = 1.33

(Note that we have a negative value for σ, which is not possible for a standard deviation. This is because we are using the estimated value of σ to convert from the standard normal distribution to the course distribution, which may not perfectly match the actual distribution of grades.)

Now we can use the z-score formula with the estimated mean and standard deviation to find the proportions of students in each grade range:

For an A grade: z-score > 1.65

z-score = (x - mean) / standard deviation

z-score = (1.65 - 0) / 1.33

z-score = 1.24

From standard normal distribution tables or a calculator, we can find that the proportion of students with a z-score greater than 1.24 is about 0.107. So for every 100 students, we can expect about:

A grades: 100 * 0.107 = 10.7 or approximately 11

For a B grade: 0.67 < z-score ≤ 1.65

z-score = (0.67 - 0) / 1.33

z-score = 0.50

From standard normal distribution tables or a calculator, we can find that the proportion of students with a z-score between 0.50 and 1.24 is about 0.205. So for every 100 students, we can expect about:

B grades: 100 * 0.205 = 20.5 or approximately 21

For a C grade: -0.40 < z-score ≤ 0.67

z-score = (-0.40 - 0) / 1.33

z-score = -0.30

From standard normal distribution tables or a calculator, we can find that the proportion of students with a z-score between -0.30 and 0.50 is about 0.307. So for every 100 students, we can expect about:

C grades: 100 * 0.307 = 30.7 or approximately 31

For a D grade: -1.60 < z-score ≤ -0.40

z-score = (-1.60 - 0) / 1.33

z-score = -1.20

Hence, From standard normal distribution tables or a calculator, we can find that the proportion of students with a z-score between -1.20 and -0.30 is about 0.304. So for every 100 students,

To learn more about the z-score visit:

https://brainly.com/question/25638875

#SPJ1

Problem: Power Output. In each case, find your average power in watts. Assume that riding a bike burns 100 Calories per mile. If you ride at a speed of 20 miles per hour, what is your average power output, in watts?

Answers

The average power output of a bike rider at a speed of 20 miles per hour is 556 W

Given, Riding a bike burns 100 Calories per mile. Speed of riding a bike is 20 miles per hour. Power is a measure of the rate at which work is done over time.

Therefore, the formula for average power is given by,

P = W/t

Where, P is power, W is work and t is time.

Now, We know that riding a bike burns 100 Calories per mile, but we have to find out the work done.

So, work done = 100 Calories × distance traveled= 100 × 1.609 × 1000 = 160900 J

Time taken = distance/speed= 1.609/20 = 0.08045 hours

Putting values in the formula of power, we get,

P = W/t= 160900/0.08045= 1999999.9 J/hour

Converting hour to seconds,1 hour = 3600 seconds1 J/s = 1 watt1 J/hour = 1 / 3600 watt

Therefore, power = 1999999.9 / 3600= 555.5556 watts (approx)

Therefore, the average power output of a bike rider at a speed of 20 miles per hour is 556 W (approx). Answer: 556

Learn more about average power output:https://brainly.com/question/14558400

#SPJ11

Other Questions
An attacker used an exploit to steal information from a mobile device, which allowed the attacker to circumvent the authentication process. Which of the following attacks is the mobile device vulnerable to?a. Bluesnarfingb. Whalingc. Skimming When assessing application controls, which one of the following input controls or edit checks is most likely to be used to detect a data input error in the customer account number field?A. Hash total.B. Control total.C. Validity check.D. Limit check. choose 3 answers, please help When listeners are very concerned about the topic of a persuasive speech, their latitude of acceptance does what?hostile (don't agree)narrowsboomerang effect help!! (1.58 x 10 ^15) - (9.82 x 10^13) in ____, the dominant idea about resilience was that communities are responsible for child resilience. what is the area of this circle? 8. Students were asked to simplify the following expressions on a test. (154 Four different student answers are shown below: Student A 21 - 3h 15-4h+6+h Student B 18h Student C 3h + 21 600p Student D 21 +- 3h Which student or students simplified the expression correctly? Explain True or false: The exclusion of certain groups from professional organizations kept membership down, which ensured that the demand for services of those already in the profession remained high. Bank ReconciliationThe following data were accumulated for use in reconciling the bank account of Creative Design Co. for August 20Y6:Cash balance according to the companys records at August 31, $42,920.Cash balance according to the bank statement at August 31, $56,300.Checks outstanding, $25,390.Deposit in transit not recorded by bank, $13,325.A check for $150 in payment of an account was erroneously recorded in the check register as $1,500.Bank debit memo for service charges, $35.a. Prepare a bank reconciliation, using the format shown in Exhibit 13.Creative Design Co.Bank ReconciliationAugust 31, 20Y6Cash balance according to bank statement$Adjusted balance$Cash balance according to company's records$Adjusted balance$b. If the balance sheet were prepared for Creative Design Co. on August 31, what amount should be reported for cash?$c. Must a bank reconciliation always balance (reconcile)? By this statement, "But for Texas' political leaders it is really more of a lift-all-yachts desire," the writer means- The majority of a facility manager's job is spent doing which of the following?a. budgetingb. forecastingc. managing peopled. managing maintenance 8 HS+_8_Cl --> _16_HCI + _1_Sg857 g HS makes how many grams of HCL The numbers used in the Trust Funds Model are, of course, just estimates. Let'sinvestigate what happens if these estimates are off by 10%. To do so, answer thefollowing questions:Question 4Let us assume an original starting value of $4 trillion in 2033, but that the actual rate ofdecline after 2033 was 10% greater than the 7.6% rate. (Notice that this refers to a 10%relative increase over the 7.6% rate of decline that was originally estimated in thelesson, and not an absolute increase of 10 percentage points.) In the questions below,consider how this would affect the estimated value of the funds in 2038?What is the new estimated value of the trust funds in 2038? Round to the nearestbillion. FILL IN THE BLANK.this could mean that enzyme 4 functions in __________ pH environments , such as the stomach and does not fold properly at other pH values. If no new mutations occur, it would be 1 point most reasonable to expect bacterial growth on which of the following plates? * A scientist is using an ampicillin-sensitive strain of bacteria that cannot use lactose because it has a functional gene in the fac operon. She has two plasmids. One contains a functional copy of the affected gene of the lac operon, and the other contains the gene for ampicillin resistance. Using restriction enzymes and DNA ligase, she forms a recombinant plasmid containing both genes. She then adds a high concentration of the plasmid to a tube of the bacteria in a medium for bacterial growth that contains glucose as the only energy source. This tube (+) and a control tube- with similar bacteria but no plasmid we both incubated under the appropriate conditions for growth and plasmid uptake. The scientist then spreads a sample of each bacterial culture (+and) on each of the three types of plates indicated below Glucose Medium Glucose Medium with Ampicillin Glucose Medium with Ampicillin and Lactos Bacterial serin with added plasmid #2 Bacterial strain with no plasmid 4 4 and 6 only 4, 5 and 6 only 3 and 4 only 1 and 2 only 1, 2, 3 and 4 only Use the following circle to solve for x 1. You ............. to avoid being so petty if you want to marry her. a) need b) will c) should d) can What is a control variable in a science experiment? Fabmark Consultancy was asked by a client to evaluate the attractiveness of a potential project to develop a new product line. The data provided by the client included cash flow estimates (in dollars), ranking of marketability by the sales force, and ranking of different product attributes from a potential customer focus group. Which of the following methods would allow Fabmark Consultancy to combine this information and analyze it?A. Q-sortB. Data envelopment analysisC. Attribute rankingD. Breakeven analysis