57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .
There are a few steps to solve this.
Here they are: First, calculate the initial concentration of HCl in the solution.
Molarity = moles of solute / volume of solution in liters.
The volume of the solution is 57.0 mL, which is 0.0570 L.
The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L
Now we can solve for moles of HCl:
moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol
Next, we need to use the pH to find the concentration of H+ ions.
pH = -log[H+]0.90 = -log[H+]
Solving for [H+],
we get:[H+] = 7.94 x 10^-1 M
Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol
Solving for V,
we get: V = 6.47 x 10^-2 L
To find how much water was added,
we subtract the final volume from the initial volume:
Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)
Therefore, 50.5 mL of water was added to the original solution.
For more such questions on pH , Visit:
https://brainly.com/question/172153
#SPJ11
The end point for a titration can be determined graphically. The end point volume for a second derivative plot corresponds to: . A) the volume titrant added where the second derivative curve crosses the x-axis. B) the volume titrant added where the second derivative curve has maximum slope. C) the volume titrant added where the second derivative curve crosses the y-axis. D) the volume titrant added where the second derivative curve has minimum slope. E) the volume titrant added where the second derivative curve has a maximum negative slope.
The volume titrant added where the second derivative curve has the greatest slope is the endpoint volume for a second derivative plot. The volume titrant added where the second derivative curve has the greatest slope, Option B, is the correct answer.
What is the Titration curve?The titration curve is a graphical representation of a chemical reaction where the stoichiometric quantity of one reactant is gradually added to another until the reaction reaches its endpoint.
The second derivative plot can be used to determine the endpoint of a titration. The second derivative is the rate of change of the slope of the titration curve. In the second derivative curve, the endpoint is recognized as the point with the maximum slope.
As a result, the end volume in a titration corresponds to the volume of titrant added where the second derivative curve has a maximum slope.
To know more about the titration curve:
https://brainly.com/question/14315454
#SPJ11
Draw the atomic structure of sodium with its electronic configuration.
here you go. kindly check attatchement
Which subatomic particles have a positive and negative electrical charge?
Electrons have a negative electrical charge, whereas protons have a positive charge.
Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.
learn more about Subatomic particles here:
https://brainly.com/question/29765133
#SPJ4
4. Which statement best states how the author conveys her purpose for writing the
article?
A.
B.
C.
D.
The author presents her opinions on why biometric technology is helpful.
The author presents various researchers who are using biometric
technology in a variety of ways.
The author provides evidence that supports the claim that old methods of
identification are unhelpful.
The author presents the progress she has made in the field of biometrics.
The statement that best states how the author conveys her purpose for writing the article is: b. The author presents researchers who are utilising biometric technology in a number of ways.
What is biometric technology?Biometric technology is a type of technology that uses physical or behavioural characteristics unique to an individual to authenticate their identity. These characteristics can include fingerprints, facial features, voice patterns, iris or retinal patterns, hand geometry, and even behavioural traits such as typing rhythm and gait.
Throughout the article, the author discusses different examples of how biometric technology is being used in different fields, such as healthcare, law enforcement, and travel. The author is presenting these examples to showcase the potential and versatility of biometric technology and its benefits in various contexts. Therefore, option b best describes the author's purpose in writing the article.
To know more about biometric technology, visit:
https://brainly.com/question/20318111
#SPJ1
What is milk an example of?
O solution
O colloid
O suspension
O compound
Milk is an example of a colloid (option B).
What is a colloid?A colloid is an intimate mixture of two substances, one of which, called the dispersed phase.
A colloid is uniformly distributed in a finely divided state throughout the second substance, called the dispersion medium (or dispersing medium).
Milk is an example of a colloidal solution, where fat is the phase and water is the medium.
Learn more about colloid at: https://brainly.com/question/11640006
#SPJ1
Use these two constants for the question that follows:
e = 1.6 × 10^−19 C
k = 8.99 × 10^9 N m^2/C^2
A positive charge and a negative charge are 10^−15 m away from each other. Using Coulomb's law, which of the following is the electrical force between these two particles?
230 N
−230 N
120 N
−120 N
Answer: -230 N
Explanation:
The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:
F = k * (q1 * q2) / r^2
where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:
F = k * (q * (-q)) / r^2 = -k * q^2 / r^2
Substituting the given values of e and k, we get:
F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N
Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:
-230 N.
titration sa with sb titration experiments are done stepwise and slowly, to guarantee not to miss the equivalence point. in this experiment, will be used to confirm the concentration of of , is . first, calculate the of the solution after adding the following volumes of base: also, determine the volume (in ) of , needed to reach the equivalence point of the titration.
In a titration experiment with strong acid (SA) and strong base (SB), the goal is to determine the concentration of one solution by reacting it with a solution of known concentration.
The experiment is performed slowly and stepwise to ensure that the equivalence point is not missed, as this is the point where the moles of the acid and base are equal.
In your question, you haven't provided the specific details of the concentrations, volumes, or substances involved in the titration.
However, I can give you a general approach to solving this problem:
1. Identify the given concentration of the known solution (either the SA or SB).
2. Calculate the moles of the known solution using the formula: moles = concentration × volume.
3. Use the stoichiometry of the reaction to find the moles of the unknown solution at the equivalence point.
4. Divide the moles of the unknown solution by its volume to find its concentration.
To determine the volume of the strong base (or acid) needed to reach the equivalence point, you can use the formula: Volume of SB = (moles of SA × volume of SA) / concentration of SB Please provide the specific information for your titration experiment, and I will be happy to help you with the calculations.
To learn more about moles, refer below:
https://brainly.com/question/21323029
#SPJ11
rank the following 4 compounds from weakest to strongest intermolecular forces? nh3, bf3, bcl3, ph3
The following 4 compounds ranked from weakest to strongest intermolecular forces are as follows: BF3 < BCl3 < PH3 < NH3.
Explanation: Intermolecular forces are the forces that exist between two or more molecules, which determine the physical characteristics of substances.
Intermolecular forces can be classified into different types, including dipole-dipole interactions, hydrogen bonding, and London dispersion forces.
These forces determine how the molecules interact with each other and how they behave under different conditions.
In the given compounds, BF3, BCl3, PH3, and NH3, each has a different arrangement of atoms that determines its intermolecular forces.
NH3 (Ammonia) is the strongest intermolecular force because it has hydrogen bonding.
PH3 has hydrogen bonding but it is weaker than NH3 as it is larger than NH3.
BCl3 and BF3 have London Dispersion forces which are weaker than hydrogen bonding.
The larger the molecule, the more electrons it has, and the stronger the London Dispersion forces.
In summary, the following 4 compounds ranked from weakest to strongest intermolecular forces are as follows:BF3 < BCl3 < PH3 < NH3
For similar question on intermolecular forces.
https://brainly.com/question/13588164
#SPJ11
which type of reaction involves the breakdown of a polymer into monomers
The type of reaction that involves the breakdown of a polymer into monomers is called hydrolysis.
Hydrolysis is a chemical reaction in which water molecules are used to break the covalent bonds that hold together the monomers in a polymer chain. During hydrolysis, water molecules are added to the polymer, causing the bonds between the monomers to break apart, and the polymer to break down into its constituent monomers. This process is the reverse of dehydration synthesis, which is the chemical reaction used to build polymers from monomers by removing water molecules.
Hydrolysis is an important process in biology, as it is used to break down complex molecules such as carbohydrates, proteins, and nucleic acids into simpler components that can be used by the cell.
To learn more about monomers refer to:
brainly.com/question/30266034
#SPJ4
Select all statements that correctly describe the typical number of covalent bonds formed by common neutral atoms. a. Atoms with 5 valence electrons typically form 5 covalent bonds. b. Atoms with 3 valence electrons typically form 3 covalent bonds. c. Atoms with 8 valence electrons do not typically form bonds. d. Atoms with 7 valence electrons typically form 1 bond.
The (b) claim is true. 3 covalent bonds are often formed by atoms having 3 valence electrons. A, c, and d are false statements.
Covalent bonds are created when atoms share electrons in order to finish the valence shell, the atom's outermost electron shell. In order to completely fill their valence shell, atoms having three valence electrons, like boron, often establish three covalent bonds. The boron atom can then achieve a stable configuration that is comparable to the noble gas configuration as a result. Nevertheless, contrary to what assertions a, c, and d indicate, atoms with 5, 7, or 8 valence electrons do not often form the same number of covalent bonds. In order to complete their valence shell, they often create fewer bonds by sharing electrons with other atoms.
learn more about covalent bonds here:
https://brainly.com/question/10777799
#SPJ4
a solution of was heated at for several hours. after some time the concentration of was determined. answer the following questions: a) what is the maximum amount of work ( ) from/for this reaction when ?
The maximum amount of work from/for this reaction a solution of was heated at for several hours is -8.69 KJ.
What is solution ?A solution is a type of homogeneous mixture composed of two or more substances in chemistry. A solute in such a mixture is a substance that has been dissolved in another substance known as a solvent. If the attractive forces between the solvent and solute particles are stronger than the attractive forces holding the solute particles together, the solvent particles separate and surround the solute particles. These encircled solute particles then move away from the solid solute and into solution. The mixing of a solution occurs at a scale where the effects of chemical polarity are involved, resulting in solvation-specific interactions. When the solvent is the greater fraction of the solution, the solution usually has the state of the solvent.
using the formula
ΔG = ΔG° + RT ln(Q)
Work done = -8.69 KJ
To know more about solutions, visit;
brainly.com/question/30665317
#SPJ1
what is the molarity of a calcium carbonate solution if 2.00 moles of calcium carbonate are dissolved in 125 ml of water?
Answer:
To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).
Volume of water = 125 mL = 0.125 L
Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:
Molarity = number of moles / volume of solution
Molarity = 2.00 mol / 0.125 L
Molarity = 16.0 M
Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.
(Please could you kindly mark my answer as brainliest)
In the pictured cell, the side containing zinc is the_________ and the side containing copper is the __________. The purpose of the Na2SO4 is to _________
In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.
A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.
A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.
Learn more about anode at:
https://brainly.com/question/17109743
#SPJ11
This portion of the titration curve of a strong base with a strong acid is the same as this region for a weak base titrated with a strong acid. a. the portion after all of the base has been neutralized
b. the endpoint pH c. the portion before the endpoint is reached d. the buffer region
The portion of the titration curve of a strong base with a strong acid is the same as the region before the endpoint is reached for a weak base titrated with a strong acid. The correct answer is Option C.
What is titration?Titration refers to the process of measuring the volume of one solution required to react with a given volume of another solution completely. The titration curve is a graph that shows the change in pH during a titration.
The pH changes quickly from acidic to basic as the volume of strong base added approaches the stoichiometric point. It can be observed that the pH of the strong base solution is high, but as it is titrated with an acid, its pH decreases. The graph gradually falls as the acid is added, finally reaching a sharp rise known as the equivalence point or endpoint. As a result, the correct option is c. the portion before the endpoint is reached.
Learn more about titration curve here: https://brainly.com/question/31030054
#SPJ11
substance that donates a proton. [ choose ] substance that accepts a proton. [ choose ] substance after its proton has been donated [ choose ] substance after it accepted a proton [ choose ]
The substance that donates a proton is acid. Substance that accepts a proton is a base. The substance after its proton has been donated is the conjugate Base. The substance, after it accepted a proton, is conjugate acid.
When an acid dissolves in water, it releases hydrogen ions (H+). This hydrogen ion is what gives acidic solutions their properties. Acids donate a proton to the base, which accepts the proton. When the base accepts the proton, it becomes a conjugate acid, and the acid that donated the proton becomes a conjugate base. In water, the conjugate base can accept another proton to become the acid again. The conjugate base is a substance that remains after the acid has donated the proton. In contrast, conjugate acid is the substance that receives the proton. The substance that donates a proton is an acid. The substance that accepts a proton is a base.Learn more about proton: https://brainly.com/question/1481324
#SPJ11
What do you think the molar mass of 2. 000 moles of carbon will be
The molar mass of 2.000 moles of carbon is 24.02 g/mol.
Molar mass is the total mass in grams of all the atoms in one mole of a substance. The unit of molar mass is grams per mole (g/mol).
The molar mass of carbon is 12.01 g/mol.
The formula for molar mass calculation is as follows:
Molar mass = Mass of substance ÷ Amount of substance
Molar mass can also be calculated using the periodic table of elements.
To calculate the molar mass of 2.000 moles of carbon, you can use the following formula:
mass = moles x molar mass
mass = 2.000 mol x 12.01 g/mol
mass = 24.02 g
For more such questions on Molar mass, click on:
https://brainly.com/question/30459977
#SPJ11
Consider the molecular structure for linuron, an herbicide, provided in the questions below. a) What is the electron domain geometry around nitrogen-1? b) What is the hybridization around carbon-1? c) What are the ideal bond angles > around oxygen-1? d) Which hybrid orbitals overlap to form the sigma bond between oxygen-1 and nitrogen-2? e) How many pi bonds are in the molecule?
Answer:
a)Electron domain geometry around nitrogen-1 is tetrahedral
b)Hybridization around carbon-1 is sp2
c)The ideal bond angles around oxygen-1 are 120 degrees.
d)Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2
e)There are no pi bonds in the molecule.
Explanation:
a) Electron domain geometry around nitrogen-1 is tetrahedral.The molecular structure of linuron is as follows: There are three carbon atoms in a row. The terminal carbon atom is linked to a methyl group and a chlorine atom. The carbon atom next to it is linked to the nitrogen atom in the herbicide. The third carbon atom is linked to two oxygen atoms, with one of them being a hydroxyl group.
b) Hybridization around carbon-1 is sp2.The carbon atom adjacent to the nitrogen atom is known as carbon-1. This carbon atom is joined to three other atoms. It has an sp2 hybridization since it has three regions of electron density.
c) The ideal bond angles around oxygen-1 are 120 degrees.Bond angles are the angles between two adjacent lines in a Lewis structure. Because oxygen-1 is linked to two other atoms, it has a bent geometry. Its ideal bond angle is 120 degrees.
d) Hybrid orbitals overlapping to form the sigma bond between oxygen-1 and nitrogen-2 is sp2 hybrid orbitals from carbon-1 and nitrogen-2.The sigma bond is the strongest type of covalent bond. Sigma bonds are created when the overlapping orbitals are arranged in a straight line. The sigma bond between oxygen-1 and nitrogen-2 is formed by the overlap of sp2 hybrid orbitals from carbon-1 and nitrogen-2.
e) There are no pi bonds in the molecule.There are no pi bonds in the molecule because all of the bonds are sigma bonds. The molecule consists of single bonds only.
To know more tetrahedral. about refer here: https://brainly.com/question/18612295#
#SPJ11
Is the distance between the electron and the nucleus fixed for an electron in a specific orbit in the Bohr model of the atom? Is this distance fixed for an electron in a specific orbital? Bohr model, fixed; in an orbital, not fixed.
The distance between an electron and the nucleus for an electron in a certain orbit is set in the Bohr model of the atom. According to Bohr's hypothesis, electrons travel in circular orbits around the nucleus at set distances that represent various energy levels.
These orbits are also known as "energy levels" or "stationary states."
For an electron in a certain orbit, the distance between the electron and the nucleus is set in the Bohr model of the atom. In accordance with Bohr's hypothesis, electrons orbit the nucleus in a circle at regular intervals that correspond to various energy levels. Sometimes these orbits are referred to as "energy levels" or "stationary states." The electron's location is instead defined by a probability distribution known as an orbital in more recent quantum mechanical models of the atom, such as the Schrödinger equation. In contrast to the fixed orbits in the Bohr model, an orbital's size and shape can change depending on the energy of the electron and the arrangement of the atoms.
learn more about Bohr model of the atom here:
https://brainly.com/question/11299441
#SPJ4
what were the factors responsible for the change of dead organic matter into fossil fuels?
Phenol red, a pH indicator, turns yellow when you breathe into a solution. How does this reaction explain why the solution turned acidic?
Phenol red is a pH indicator that changes color depending on the acidity of the solution. it is the Acid-Base reaction. When you breathe into a solution containing phenol red, the carbon dioxide in your breath reacts with the water in the solution to form carbonic acid, which is an acid. This increases the acidity of the solution, which causes the phenol red to turn yellow.
Phenol red is a pH indicator that turns yellow when you breathe into a solution. This reaction explains why the solution turned acidic, which can be explained by the following reaction process:
CO2 + H2O → H2CO3 → H+ + HCO3-
The carbon dioxide you exhale into the solution is soluble in water and reacts with it to form carbonic acid (H2CO3).Carbonic acid is a weak acid that dissociates into bicarbonate ions (HCO3-) and hydrogen ions (H+).The hydrogen ions then combine with the indicator phenol red and make the solution acidic, turning it yellow. Hence, the color change of the phenol red to yellow is an indicator that the solution is acidic. Phenol red is a pH indicator that is used to determine whether a solution is acidic or basic. It is widely used in microbiology as an indicator of carbohydrate fermentation. The indicator changes from red to yellow as the pH of the solution decreases. A yellow color indicates that the solution is acidic, while a red color indicates that the solution is alkaline. Phenol red is widely used to detect pH changes in laboratory and clinical settings. It is commonly used in biology labs to determine the pH of bacterial cultures and media. In clinical settings, it is used to measure pH changes in blood and urine samples.
For more such questions on Acid-Base reaction , Visit:
https://brainly.com/question/15334816
#SPJ11
5.
P
If I have 1.3 L of NH, at a temperature of 307K and a pressure of 1.43 atm, how many moles of
NH, gas are present?
V
n
R
T
The number of moles of NH₃ in 1.3L of NH₃, at a temperature of 307K and a pressure of 1.43 atm is 0.073794 mol. This is using Ideal gas equation.
What is Ideal gas Equation?Ideal gas law is a precise approximation of the behaviour of several gases under various situations in thermodynamics. The Ideal Gas Equation combines several empirical laws, including Avogadro's, Boyle's, and Charle's laws.
The ideal gas equation is a mathematical expression of the states of hypothetical gases using a set of physical and empirical constants. Another name for it is the general gas equation. It is characterised as:
“The ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation of the behaviour of many gases under many conditions, although it has several limitations”.
What are the limitations of ideal gas equation?There are various drawbacks to the ideal gas equation. For as long as the density is kept low, this equation holds. This equation can be used to describe a single gas or even a combination of several different gases, where n represents the total moles of gas particles in the given mixture.
To know more about Ideal gas, visit:
https://brainly.com/question/28257995
#SPJ1
the principles which underlie balancing chemical equations include
The principles that underlie balancing chemical equations include the law of conservation of mass and the concept of stoichiometry.
The law of conservation of mass states that matter can neither be created nor destroyed in a chemical reaction, meaning that the total mass of the reactants must be equal to the total mass of the products. This principle requires that the number of atoms of each element on the reactant side of the equation must be equal to the number of atoms of that element on the product side. The concept of stoichiometry involves using the balanced equation to determine the quantitative relationships between the reactants and products, including the amounts of each substance involved in the reaction.
To know more about stoichiometry, here
brainly.com/question/9743981
#SPJ4
--The complete question is, The principles that underlie balancing chemical equations include the______________ and the concept of stoichiometry. ---
if the density of a gas is 1.87 grams/liter at 34.0oc and 745 mm hg, what will be its density at 84.0oc and 721 mm hg?
The density of the gas at 84.0 °C and 721 mmHg, given that the gas has an initial density of 1.87 grams/liter, is 1.55 grams/liter
How do i determine the new density of the gas?The following data were obtaibed from the question:
Initial density (D₁) = 1.87 grams/literInitial temperature (T₁) = 34 °C = 34 + 273 = 307 KInitial pressure (P₁) = 745 mmHgNew temperature (T₂) = 84 °C = 84 + 273 = 357 KNew pressure (P₂) = 721 mmHgNew density (D₂) =?The new density of the gas can be obtained as illustrated below:
D₁T₁ / P₁ = D₂T₂ / P₂
(1.87 × 307) / 745 = (D₂ × 357) / 721
Cross multiply
745 × 357 × D₂ = 1.87 × 307 × 721
Divide both side by (745 × 357)
D₂ = (1.87 × 307 × 721) / (745 × 357)
D₂ = 1.55 grams/liter
Thus, the density of the gas is 1.55 grams/liter
Learn more about density:
https://brainly.com/question/28974497
#SPJ1
which solutes are reabsorbed from the nephron loop? select all that apply. a) sodium loops b) glucose and amino acids c) chloride d) water e) potassium ions.
The right response is either Sodium ions or Chloride ions. sodium ions and chloride ions are the proper solutes that are reabsorbed from the nephron loop.
Reabsorbing water and specific dissolved substances from the glomerular filtrate is carried out by the nephron loop, also referred to as the loop of Henle. While the ascending leg of the nephron loop is impermeable to water, it actively reabsorbs sodium and chloride ions. The descending limb of the nephron loop is permeable to water. While the reabsorption of water is controlled throughout the nephron, particularly in the collecting duct, the reabsorption of glucose, amino acids, and potassium ions occurs primarily in the proximal convoluted tubule. Consequently, sodium ions and chloride ions are the proper solutes that are reabsorbed from the nephron loop.
learn more about Sodium ions here:
https://brainly.com/question/29704319
#SPJ4
Question.05: (3 mrks) Neon gas in luminous tubes radiates red light-the original "neon light." The standard gas containers used to fill the tubes have a volume of 1.0 L and store neon gas at a pressure of 101 kPa at 22 °C. A typical luminous neon tube contains enough neon gas to exert a pressure of 1.3 kPa at 19 °C. If all the gas from a standard container is allowed to expand until it exerts a pressure of 1.3 kPa at 19 °C, what will its final volume be? If Lilia's sister Amelia is adding this gas to luminous tubes that have an average volume of 500 mL, what is the approximate number of tubes she can fill?
Answer:
Answer: The final volume of the gas will be 8.07 L.
Approximate number of tubes Amelia can fill = 8.07 L/500 mL = 16.14 tubes.
Methanol burns in oxygen to form carbon dioxide and water.
Part A Write a balanced equation for the combustion of methanol. 2CH3OH(l)+3O2(g)-->2CO2(g)+4H2O(g)
Part B Calculate delta H degree rxn at 25degree C.
Part C Calculate delta S degree rxn at 25degree C.
Part D Calculate delta G degree rxn at 25 degreeC.
Part E Is the combustion of methanol spontaneous?
Methanol burns in oxygen to form carbon dioxide and water.
Part A. The balanced equation for the combustion of methanol is:
2CH3OH(l)+3O2(g)⇌2CO2(g)+4H2O(g)
Part B. The ΔHo rxn at 25 °C can be calculated using the standard enthalpy of formation of the reactants and products: ΔHorxn = ∑ΔHof (products) - ∑ΔHof (reactants)
ΔHorxn = [(2)(-393.5) + (4)(-285.8)] - [(2)(-115.9)] = -890.4 kJ/mol
Part C. The ΔSorxn at 25 °C can be calculated using the standard entropy of formation of the reactants and products: ΔSorxn = ∑ΔSof (products) - ∑ΔSof (reactants)
ΔSorxn = [(2)(213.7) + (4)(188.8)] - [(2)(58.3)] = 590.6 J/molK
Part D. The ΔGorxn at 25 °C can be calculated using the standard Gibbs free energy of formation of the reactants and products: ΔGorxn = ∑ΔGof (products) - ∑ΔGof (reactants)
ΔGorxn = [(2)(-878.7) + (4)(-237.1)] - [(2)(-158.9)] = -1543.3 kJ/mol
Part E. The ΔGorxn at 25 °C is negative, meaning that the combustion of methanol is spontaneous.
"methanol burns in oxygen", https://brainly.com/question/31138218
#SPJ11
In atrial fibrillation, the atria do not properly contract: Howv would this be apparent on an ECG? P waves would be reduced or absent T waves would be recluced or absent ORS waves would be reduced or absent
The key response is that P waves on an ECG would be diminished or absent in atrial fibrillation. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart.
Atrial fibrillation causes uncontrolled electrical activity in the atria, which causes irregular and frequently rapid heartbeats. An electrocardiogram (ECG), a test that gauges the electrical activity of the heart, can identify this aberrant activity. Atrial fibrillation is characterised by the rapid and irregular fibrillation waves, which can be challenging to identify from the ventricle's T waves. Normally, atrial fibrillation is characterised by P waves, which represent the electrical activity of the atria. P waves are consequently frequently diminished or missing on an ECG in atrial fibrillation. Atrial fibrillation can be distinguished from other arrhythmias by the irregular QRS complexes and absence of P waves, which are characteristics of the condition.
learn more about atrial fibrillation here:
https://brainly.com/question/30414659
#SPJ4
how should you write the volume dispensed by a 5 ml volumetric pipet?
When writing the volume dispensed by a 5 ml volumetric pipet, it should be written as 5.00 mL.
A volumetric pipet is a laboratory instrument utilized to dispense very accurate and precise volumes of liquid. It is commonly used in analytical chemistry to make up solutions or to dilute stock solutions. Volumetric pipettes, also known as transfer pipettes or bulb pipettes, are single-volume liquid measuring instruments. They are meant to deliver a precise volume of liquid at a fixed temperature when the tip is slightly below the liquid surface.
It is important to write the volume with two decimal places to indicate the precision of the pipette.
Volumetric pipettes are utilized to prepare and dilute solutions. They are made of glass, with a round or conical end. They are intended to provide a precise volume of liquid, such as a certain number of milliliters or milligrams of a substance. Because of its accuracy, a volumetric pipet is used to create a standard solution.
For more such questions on volumetric pipet, click on:
https://brainly.com/question/28945018
#SPJ11
Directions: This group of questions consists of five lettered headings followed by a list of phrases or sentences. For each phrase or sentence, select the one heading to which it is most closely related. Each heading may be used once, more than once, or not at all.This group of questions refers to molecules of the following substances.(A) Cytochrome(B) FADH2(C) NAD+(D) NADP+(E) Oxygen (O2)An intermediate electron acceptor for oxidations that occur in both glycolysis and in Krebs cycle reactionsa) cytochromeb) fadh2c) nad+d) nadp+e) oxygen
Molecules of the following substances are: (A) Cytochrome, (B) FADH2, (C) NAD+, (D) NADP+, (E) Oxygen (O2).
NAD+ is an intermediate electron acceptor for oxidations that occur in both glycolysis and in Krebs cycle reactions among the given substances.
Cytochrome: It is a heme-containing enzyme, which is responsible for the transfer of electrons during respiration.
It is found in the respiratory chain of the mitochondria, which is also called the electron transport chain. This chain is responsible for generating ATP during oxidative phosphorylation.
FADH2: Flavin adenine dinucleotide, also known as FAD, is a coenzyme involved in energy metabolism.
It is produced as a byproduct of the Krebs cycle and transfers electrons to the electron transport chain to create a proton gradient used to produce ATP. It is a redox-active molecule.
NAD+: Nicotinamide adenine dinucleotide, also known as NAD or NADH, is a coenzyme involved in energy metabolism.
NAD+ is the oxidized form of NADH, and the conversion of NAD+ to NADH is a key step in the Krebs cycle.
It accepts electrons from other molecules and becomes reduced, and then it transfers those electrons to other molecules in the cell.
NADP+: Nicotinamide adenine dinucleotide phosphate, also known as NADP or NADPH, is a coenzyme that acts as an electron carrier in metabolic processes.
It is important in anabolic reactions, such as lipid and nucleic acid synthesis, which require reducing power. It is the reduced form of NADP+, and it is involved in the conversion of CO2 into glucose.
Oxygen (O2): It is an essential molecule required for the process of respiration. It acts as the final electron acceptor in the electron transport chain, where it combines with electrons and protons to form water.
This generates the proton gradient needed for ATP synthesis during oxidative phosphorylation.
to know more about molecules refer here:
https://brainly.com/question/19922822#
#SPJ11
a sample of a gas has a volume of 1000.0 ml at -23.0oc and 570. mm pressure. what is the volume of the gas at stp?
The volume of a sample of gas which has a volume of 1000ml at -23°C and 570mm pressure will be 0.825L.
What is the volume of gas?The volume of the gas at STP. STP (Standard Temperature and Pressure) can be defined as 273.15 K and 1 atm pressure. The volume of the gas can be found using the formula:
PV = nRT
where, P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature, measured in Kelvin (K).
The given temperature is -23.0°C = 250.15 K, and the given pressure is 570 mm = 0.750 atm.
Let the volume of the gas at STP be V.
STP has a temperature of 273.15 K and a pressure of 1 atm.
Then, according to the Avogadro principle, the volume of the gas is directly proportional to the number of moles of gas.The formula used here is:
P₁V₁/T₁ = P₂V₂/T₂
where P₁, V₁, and T₁ are the pressure, volume, and temperature of the initial state, and P₂, V₂, and T₂ are the pressure, volume, and temperature of the final state.
P₁ = 0.750 atm, V₁ = 1000.0 mL = 1.0 L, and T₁ = 250.15 K
P₂ = 1 atm, V₂ = ?, and T₂ = 273.15 K.
Now, we substitute the values into the formula,
P₁V₁/T₁ = P₂V₂/T₂ (0.750 atm)
(1.0 L) / (250.15 K) = (1 atm) (V₂) / (273.15 K)
V₂ = (0.750 atm) (1.0 L) (273.15 K) / (250.15 K) (1 atm)
V₂ = 0.825 L
Therefore the volume of the gas at STP is 0.825 L.
Learn more about Volume of gas here:
https://brainly.com/question/24189159
#SPJ11