100%
Sutt S
Kam Scheela MARIO MARTINEZ-HTPhysics.pdf
Test BGK
HW#10
Question: A pinball machine's plunger has a spring constant of 22
N/m and is compressed by 0.04 m to start a 0.006 kg pinball.
1. What is the elastic potential energy before the ball is released?
2. What is the kinetic energy of the pinball the instant it leaves the
spring?
3. What is the speed of the pinball the instant it leaves the spring?
4. If the pinball is moving at 1.3 m/s as it is deflected horizontally
across the top of the pinball machine, how much higher above the
ground is this part of its path when compared to its starting
position?
Squation
Drawing
Ta
Signature
Instructions.
Answers
Answer:
1. The elastic potential energy is 0.0176 Joules
2. The kinetic energy of the pinball the instant it leaves the spring is 0.0176 Joules
3. The speed of the pinball the instant it leaves the spring is approximately 2.42212 m/s
4. The height of the part where the pinball is located on the machine above the ground is approximately 0.213 meters
Explanation:
The spring constant of the pinball machine's plunger, k = 22 N/m
The amount by which the pinball machine's plunger is compressed, x = 0.04 m
The mass of the pinball ball, m = 0.006 kg
1. The elastic potential energy, P.E. = 1/2·k·x²
By substitution, we get;
P.E. = 1/2 × 22 N/m × (0.04 m)² = 0.0176 J
The elastic potential energy, P.E. = 0.0176 J
2. At the instant the pinball leaves the spring, the plunger and therefore the force of the plunger no longer acts on the pinball
Since there are no external forces acting on the pinball to increase the speed of the pinball after it leaves the spring, the velocity reached is its maximum velocity, and therefore, the kinetic energy, K.E. is the maximum kinetic energy which by the conservation of energy, is equal to the initial potential energy
Therefore;
K.E. = P.E. = 0.0176 J
The kinetic energy of the pinball the instant it leaves the spring, K.E.= 0.0176 J
3. The kinetic energy, K.E., is given by the following formula;
K.E. = 1/2·m·v²
Where;
v = The speed or velocity of the object having kinetic energy K.E.
Therefore, from K.E. = 0.0176 J, and by plugging in the values of the variables, we have;
K.E. = 0.0176 J = 1/2 × 0.006 kg × v²
v² = 0.0176 J/(1/2 × 0.006 kg) = 88/15 m²/s²
v = √(88/15 m²/s²) ≈ (2·√330)/15 m/s ≈ 2.42212 m/s
The speed of the pinball the instant it leaves the spring, v ≈ 2.42212 m/s
4. The height of the pinball is given by the following kinematic equation of motion;
[tex]v_h[/tex]² = u² - 2·g·h
Where;
[tex]v_h[/tex] = The velocity of the pinball at the given height = 1.3 m/s
u = v ≈ 2.42212 m/s (The initial velocity of the pinball as it the spring)
g = The acceleration due to gravity ≈ 9.8 m/s²
h = The height of the pinball above the ground
We get;
[tex]v_h[/tex]² = 1.3² = 2.42212² - 2 × 9.8 × h
∴ h = (2.42212² - 1.3²)/(2 × 9.8) ≈ 0.213
The height of the part where the pinball is located on the machine above the ground, h ≈ 0.213 m
Related Questions
With this pandemic, have you gained a new appreciation for your education
Answers
Answer
YESSS. my education went down hill since the pandemic :(
Explanation:
Question 4 (1 point)
How far does a sound wave travel in 3 seconds if the air temperature is 30 degrees
Celsius?
a) 114.33 m
b) 1047 m
c) 1029 m
d) 116.33 m
Answers
Answer:
B
Explanation:
v=349m/s
d=vt
d=349*3
d=1047m
WHY 349??
Because, velocity of sound increases about 0.6 m/s for every 1 degree celsius rise in temp.
Velocity of sound is about 343 m/s at 20 degrees C, so 0.6*10=6 more m/s, or 349 m/s. Kinda cool how temperature alters the speed of sound!
The cerebellum is part of the
____?
Answers
Explanation:
i think it the central nervous system
HELP PLZ
What would it mean if an object had no potential energy?
Answers
How do the temperature curves in your graph show the range of temperature?
Answers
Answer:
Step-by-step Explanation:
Features of Elements
Use the periodic table on the next page to complete the following
table. The number in the name indicates the isotope and therefore
the nuclide number
Element and Chemicol Atomic Mass
Number Number
of
of
Hudito
isotope
number
Symbol.
number
notation
profons neutrons
2 4 나
Helium-4
He
Beryllium-9
Nitrogen-14
N
Oxygen 10
0
Phosphorus 32
P
Chlorine-35
Potassium 39
Tungston-150
w
Lead 90
PU
Answers
The kinetic energy of a body moving at a speed of 10 m / s is equal to 1000 J. What is the body mass
Answers
Answer:
m = 20 kg
Explanation:
Given that,
The speed of a body, v = 10 m/s
Kinetic energy of the body, K = 1000 J
We need to find the mass of the body. The formula for the kinetic energy of a body is given by :
[tex]K=\dfrac{1}{2}mv^2\\\\m=\dfrac{2K}{v^2}\\\\m=\dfrac{2\times 1000}{(10)^2}\\\\m=20\ kg[/tex]
So, the mass of the body is equal to 20 kg.
A car weighs 11000 N on Earth. What is its mass?
A) 300 kg
B) 1122 kg
C) 0 kg
D) 107,800 kg
Answers
Help!Yall get brainliest
Answers
Answer:
Explanation:
Good sources include barley, oatmeal, beans, nuts, and fruits such as apples, berries, citrus fruits, and pears. Many foods contain both soluble and insoluble fiber. In general, the more natural and unprocessed the food, the higher it is in fiber. There is no fiber in meat, dairy, or sugar.
I got stuck on this question
Answers
Answer it 2n
Explanation:
The current in the wires of a circuit is 180.0 milliAmps. If the
voltage impressed across the ends of the circuit was doubled
and the resistance was one-third the original value, then its
new current would be _____milliAmps.
Answers
Explanation:
ls xgfmc!hchlvb! jt?bjgchfb j
As a cold air mass advances on a warm air mass, what usually comes before it?
Answers
Answer: A cold front occurs when a cold air mass advances into a region occupied by a warm air mass. If the boundary between the cold and warm air masses doesn't move, it is called a stationary front.
Explanation: Two types of occluded front exist: the warm-type and the cold-type. They’re distinguished by the relative temperatures of the air mass ahead of the occlusion – in other words, the air mass ahead of the original warm front – and the air mass behind the cold front. If the air behind the cold front is colder than the air ahead of the occlusion, it shoves beneath that air (because it’s denser) to form a cold-type occluded front. If the air behind the cold front is warmer than the air ahead, it rides over it to form a warm-type occluded front – which appears to be the more common case. In either situation, the lighter warm air representing the air mass originally between the warm and cold fronts sits above the boundary between the two cooler air masses.
Hope this helps!!
In paragraph 3 and paragraph 24, what is meant by the phrase “designer babies”? A. Babies that are bred to be particularly attractive
B. Babies whose DNA has been altered to enhance a specific trait
C. Babies whose DNA has been altered to avoid disease
D. The biological children of genetic researchers
Answers
A sharpening wheel is traveling at 5 rad/s, it slows down to rest in 30 seconds while sharpening an axe. What is its angular acceleration?
Answers
Answer:
Angular acceleration [tex]= 0.167[/tex] rad/s^2
Explanation:
Given
Initial Angular velocity (w1) [tex]= 5[/tex] rad/s
Final Angular velocity (w2) [tex]= 0[/tex] rad/s
Time taken to change velocity from w1 to w2 [tex]= 30[/tex] seconds
Angular acceleration is equal to the change in angular velocity to the time taken for making thing change
Hence, Angular acceleration
[tex]\frac{w_2 -w_1}{t} \\\frac{5-0}{30}\\0.167[/tex]rad/s^2
The brakes of a 2000 kg car apply a force of 250 N to slow down a car as it comes off of an exit ramp. What is the acceleration of the car?
Answers
How would a weaker jet stream help to cause extreme flooding?(1 point)
Answers
Answer:
It would allow storm systems to stall in an area.
Answer: A weaker jet stream would allow storm systems to stall in one area.
PLEASE HELP! WILL MARK BRAINLIEST!
Two kids are roller skating. Amy, with a mass of 55 kg, is traveling forward at 3 m/s. Jenny, who has a mass of 40 kg, is traveling in the opposite direction at 5 m/s. They crash into each other and hold onto each other so that they move as one mass. How fast are they traveling? How would you find your answer?
Answers
Answer:
They traveling at along the direction of 55 kg kid.
Step-by-step explanation:
Conservation of momentum-
Momentum of a system is constant if there are no external forces acting on the system.
As they crash into each other and hold onto each other so that they move as one mass and no other force is acting on them, so conservation of momentum can be applied here.
The final direction of velocity will be opposite to the assumed direction of the mass of 40 kg.
This is a conservation of momentum problem. The equation relevant here is
[tex]\[m_1v_1+m_2v_2=\left ( m_1+m_2 \right )v_f\][/tex]
where m is the mass and v is the velocity. Because Amy and Jenny move as one mass after crashing (or colliding) with each other, this is an inelastic collision. What we to find is the final velocity, [tex]v_f[/tex], of both Amy and Jenny as a single body.
[tex]v_f=\frac{m_1v_1+m_2v_2}{\left ( m_1+m_2 \right )} = \frac{(55)(3)+(40)(5)}{(55+40)} = \text{3.84 m/s}.[/tex]
Which two statements describe what happens in both nuclear fusion and
nuclear fission reactions?
A. Each nucleus formed has fewer protons than the original nucleus
had.
B. Nuclei with small masses combine to form nuclei with larger
masses.
C. Radiation is released from the nuclei that undergo a reaction.
D. A small amount of the mass in each nucleus that undergoes a
reaction is converted to energy.
Answers
Answer:
C. Radiation is released from the nuclei that undergo a reaction.
D. A small amount of the mass in each nucleus that undergoes a
reaction is converted to energy.
Two statements, that describe what happens in both nuclear fusion and nuclear fission reactions, are:
Radiation is released from the nuclei that undergo a reaction.A small amount of the mass in each nucleus that undergoes a reaction is converted to energy.Hence, option (C) and (D) are correct.
What is nuclear reaction?A nuclear reaction is a process in nuclear physics and nuclear chemistry where two nuclei or a nucleus and an outside subatomic particle meet to create one or more new nuclides. Consequently, at least one nuclide must change throughout a nuclear reaction.
Instead of being referred to as a nuclear reaction, the process is simply referred to as a sort of nuclear scattering if a nucleus interacts with another nucleus or particle and they subsequently separate without altering the nature of any nuclide.
Learn more about nuclear reaction here:
https://brainly.com/question/16526663
#SPJ5
Which is the correct definition for sea floor spreading
Answers
In result, the ocean floors move like conveyor belts, carrying the continents along with them
what is acceleration
Answers
Answer: acceleration means the speed is changing, but not always. When an object moves in a circular path at a constant speed, it is still accelerating, because the direction of its velocity is changing.
Explanation:
someone help please !!
Answers
Answer:
c.
is the answer please brainliest
Does the earth have mass
Answers
Answer:
yes it does
Explanation:
it's not like Balloon it is a solid so it the earth does have a mass
A hair dryer is rated at 1.2kW. When it is plugged into a standard outlet and turned on, what is the current in the hair dryer?
Answers
Answer:
1200 watts at a standard 120v draws 10 amps
please help!
A proton moves perpendicularly to a magnetic field that has a magnitude of 4.20 x 10-2 T. What is the speed of the particle if the magnitude of the magnetic force on it is 2.40 x 10-14 N?
Answers
Answer:
V=3.57 × 10^6 m/s
hope it is helpful..
The speed of the proton in the magnetic field is 3.57×10⁶ m/s.
To determine the speed of the proton, we need to know about the magnetic force experienced by a charged particle in a magnetic field.
What is the magnetic force on a charge particle in a magnetic field?From lorentz law, the magnetic force on a charge particle is given asF=q×v×B
where, q= charge of the particle
v= speed of the particle
B= magnetic field
What will be the speed of the charge particle, proton, if the magnetic field and force are given?Magnetic force(F)= q×v×Bv=F/(q×B)
Here, B= 4.20×10⁻²TF=2.40×10⁻¹⁴N
q= 1.6×10⁻¹⁹C
Then, v= 2.40×10⁻¹⁴/ ( 4.20×10⁻²× 1.6×10⁻¹⁹)
= 3.57×10⁶ m/s.
Thus, we can conclude that the speed of the proton in the magnetic field is 3.57×10⁶ m/s.
Learn more about the magnetic force here:
https://brainly.com/question/25932320
#SPJ2
URGENT PLEASE HELP!!!! GIVING BRAINLIEST!! If you answer this correctly ill answer some of your questions you have posted! (30pts)
Answers
Answer:
5
Explanation:
From the attachement,
M.A = Load(L)/Effort(E)
M.A = L/E...................... Equation 1
Where M.A = .Mechanical Advantage, L = Load, E = Effort.
Given: L = 500 N, E = 100 N
Substitute these values into equation 1
M.A = 500/100
M.A = 5.
Hence the actual mechanical advantage of the pulley is 5
Are acceleration and force proportional or inversely proportional values?
Answers
Answer:
Yes, acceleration and force are directly proportional to each other.
Explanation:
The force acting on an object is given by :
F = ma
Where
m is mass
a is acceleration
It can be clear from the above formula that the acceleration and the force are directly proportional to each other.
Narcotics are highly addictive and affect the driver's
Oa) decision making
Ob) vision
Oc) motor skills
Od) all of the above
Answers
Answer:
D
that's should be the answer
URGENT PLEASE HELP!!!! GIVING BRAINLIEST!! If you answer this correctly ill answer some of your questions you have posted! (29pts)
Answers
Chemical=B
Mechanical=C
Nuclear=A
Electromagnetic=D
Thermal=E
I think these are right but if not I’m sorry
Hope I helped :]
Mechanical-D
Nuclear-a
Electromagnetic-C
Thermal-E
How much potential energy does a 4 kg object have that is 5 meters off the ground?
math pls help
Answers
196 J
Explanation:
GPE= ham
GPE= (5)(9.8)(4)
GPE= 196 J
Do all force interactions cause a noticeable change in motion? Explain your thinking?
!THANK YOU!
Answers
Answer:
No. If you apply a force in a chair, for example, you only will be able to move the chair if you beat the static frictional force. So, with that example, we can see that is not any type of force that can produce movement. The only force that produces movement is a result force which is non-zero.